I haven’t had a problem in over 20 years – but my sheaves were not damaged.
Gary From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Joel Aronson via CnC-List Sent: Wednesday, March 11, 2020 11:13 AM To: cnc-list <cnc-list@cnc-list.com> Cc: Joel Aronson <joel.aron...@gmail.com> Subject: Re: Stus-List wire-to-rope vs rope Joe, Unless the sheave was damaged, it should not be an issue. You could add a cover to the end of the halyard. Joel On Wed, Mar 11, 2020 at 11:02 AM Della Barba, Joe via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: My wire to rope jib halyard dates back to the 1980s and has some nasty meat hooks. I have several all rope halyards that were given to me and have sat inside my shed for years. I used the old wire halyard to pull one through and my original thought was to get another one made. This does raise an obvious question – why not just use the rope? My fear is that since the sail usually only comes down once a year if that, the rope will get chewed through on the masthead shiv. Is this an issue? Joe Della Barba Coquina C&C 35 MK I www.dellabarba.com <http://www.dellabarba.com> _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray -- Joel
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray