https://photos.app.goo.gl/g1ViKUJJeLnRauD47
Here's ours On Mon, May 25, 2020, 12:22 PM Ken Heaton via CnC-List < cnc-list@cnc-list.com> wrote: > Hi Len, > > Many people will say you should not attach your autopilot to your > quadrant, but instead install another independent arm onto the rudder shaft. > > Still, ours is attached to our quadrant (Radial Wheel) and we've had no > problems with it there in 12 years. We aren't sailing around the world > though. > > Photos here: > > https://photos.app.goo.gl/GDctE5v2j7jdphxr7 > https://photos.app.goo.gl/mbUNnFetP4DzAZUW8 > > Ken H. > > > On Mon, 25 May 2020 at 15:31, Len Mitchell via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Does anyone have pictures of their Auto Pilot linear drive installation >> to the quadrant? So mounted in the port side lazarette. I have below deck >> pics. TIA >> Len Mitchell >> Crazy Legs >> 1989 37+ >> Midland On. >> >> >> Sent from my mobile device. >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray