Yes. I just rebuilt my water pump on a yanmar 3qm30h. It was not that hard actually. I ordered a major rebuild kit off Ebay. Once you clean the housing the new bearings will seem very snug going in, which is normal. Take a large socket that fits the outside rim of the bearing and use a hammer to tap it in. Don't kill it and ensure its aligned straight. It will pop in place. I used a little packing grease in bith the bearings to help seal it.
I've just rebuilt the yanmar and you can see it all on Instagram. My account is nina1980cc Good luck, and feel free to email or call me with any questions. Regards, Brian brianwdavis...@gmail.com 954.892.1128 On Wed, May 27, 2020, 3:36 PM Gerald Fennessey via CnC-List < cnc-list@cnc-list.com> wrote: > Any one have experience pressing in a new seal > in the 3gm raw water pump. > > Thanks > > Gerry > Fianna 1985 35 MK3 > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
