Yep, that's the one. Thanks Ken. To clarify about the material, I said aluminum but it is likely something else. Vendor said maybe magnesium would have a lower melting point.
Much appreciation! -- Tim Rutherford 1981 C&C 36-1 KCB #244 Chamamé tim.rutherford.m...@gmail.com On Mon, Jun 8, 2020 at 5:27 PM Ken Heaton <kenhea...@gmail.com> wrote: > This one? > > https://southshoreyachts.com/shop/round-corner-grab/ > > Ken H. > > On Mon, 8 Jun 2020 at 17:57, Tim Rutherford via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Well, here's a situation where I should have asked the question first. >> >> Took the fiddle castings, shown in a picture, to a local powder coating >> shop. Today I received a call that the castings are apparently aluminum and >> were melted in the process. The shop offers to replace or credit for >> damage. >> >> Do we have a source of fiddle castings? >> >> https://drive.google.com/file/d/1JjZzOnMrnAmHXdP5bMxcjVZc5KY12nQT/view?usp=sharing >> >> Many thanks in advance. >> -- >> Tim Rutherford >> 1981 C&C 36-1 KCB #244 Chamamé >> tim.rutherford.m...@gmail.com >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >>
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
