It’s the Winterville Machine Shop—they do a lot of custom work for DuPont in Kinston (I think they ‘spun off’ from DuPont back in the day! Their facility is on Mill St. In ‘downtown’ Winterville—I don’t have a phone number for them. Call them early—at least in the summertime they start about 4:00 AM and the place closes about noon!
Sent from AOL Mobile Mail Get the new AOL app: mail.mobile.aol.com On Thursday, August 6, 2020, John Conklin via CnC-List <cnc-list@cnc-list.com> wrote: Interested charlie what shop ? I was.blaming the VPC line but they could use a little knurling?Thanks ! John ConklinS/V Halcyonwww.flirtingwithfire.net On Aug 6, 2020, at 10:18 AM, Charlie Nelson via CnC-List <cnc-list@cnc-list.com> wrote: Most likely the drums are worn smooth and do not provide enough friction to hold the line. I took all my drums to a local machine shop and they ‘re-knurled’ all of them for $30 each. You can even choose the knurl ‘pattern’—simple vertical, diamond, etc. Just be careful that the shop is not too aggressive with them since such a knurl can chew up the line! Charlie NelsonWater PhantomC&C 36 XL/kcb Sent from AOL Mobile Mail Get the new AOL app: mail.mobile.aol.com On Thursday, August 6, 2020, rockland bazemore via CnC-List <cnc-list@cnc-list.com> wrote: That directory doesn’t seem to have Barient 21-33 unless they are listed as a different size.I’m not sure the exact diameter of the lines but all seem to fill the tailers appropriately. I'd guess the Main halyard is around 11mm. Is there info somewhere that has the recommended size? Do the drums need knurling or something? On Thu, Aug 6, 2020 at 9:31 AM Joel Aronson via CnC-List <cnc-list@cnc-list.com> wrote: Is the line slipping or is the drum rotating? What diameter line? On Thu, Aug 6, 2020 at 9:28 AM rockland bazemore via CnC-List <cnc-list@cnc-list.com> wrote: It's almost like I'm doing something wrong because all of my cabin top Barient 21-33 ST winches seem to let the line slip even with 4 wraps tucked snuggly into the tailer. Putting up the main and reefing is a bear. Could it be that all of the drums happen to have lost their grip? Lastly, does anyone have the service manual for these? I couldn't find it on the L-36 site. thanks all! -- Rockland BazemoreS/V Blue PearlC&C 37/40+Port Washington, NY_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray -- Joel _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
