I have been using the Interlux lower unit coating. Works fine.
From: Bill Coleman <colt...@gmail.com> Sent: Tuesday, August 11, 2020 9:02 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Painting Flexofold props? >From what I understand, the commercial guys just spray straight zinc primer on props and shafts. My boat has Prop Speed from a PO, , but it ridiculously expensive, IMHO. I won’t be buying it. Bill Coleman Erie PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bruce Whitmore via CnC-List Sent: Monday, August 10, 2020 8:29 PM To: C&C List Cc: Bruce Whitmore Subject: Stus-List Painting Flexofold props? Hello all, We are getting the bottom done on our 1994 C&C 37/40+, and at that time, I am changing a rather old 3-blade prop in not the best condition to a 3 blade Flexofold. The yard recommends applying Pettit 1792 to the running gear. When I asked Flexofold about this, they said to not paint it for the first year, and see how it progresses. The only thing is, I don't intend on pulling the boat again until it needs a new bottom job. Do any of you folks in salt water have Flexofolds (or feathering props for that matter), and you you recommend applying the Pettit 1792? Thanks in advance for your insights Bruce Whitmore
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray