Bob, didn’t you used to make Plastic tanks?
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert Boyer via CnC-List Sent: Monday, August 17, 2020 2:59 PM To: cnc-list@cnc-list.com Cc: Robert Boyer Subject: Re: Stus-List Fuel Tank replacements I did the same thing about 5 years ago but upgraded to 1/4” thick. The upgrade in thickness was a minimal cost. Bob Bob Boyer S/V Rainy Days (1983 C&C Landfall 38 - Hull #230) Blog: dainyrays.blogspot.com Email: dainyr...@icloud.com Annapolis, MD (Presently in Baltimore MD for the summer) On Aug 17, 2020, at 2:04 PM, ssjohnson via CnC-List <cnc-list@cnc-list.com> wrote: My tank had a label in the top for Florida Marine Tanks with a stamped model #.... mine was FMT-32-CC. They found the original drawings. 6-8 weeks to have it made and shipped. Full payment up front . Mine was $586 + $200 to epoxy coat + shipping of about%100. Upgraded from 1/8 inch to 3/16 inch aluminum. Not so much fun this year.. Spencer Johnson 84 LF38 Waukegan IL _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray