The chances that you might find a replacement cap are slim to none. Somehow all the standards have changed since the original were installed.
I am in a similar boat; most of my fill caps are worn, not working or temporary. I need to replace all three (water, waste and fuel). Is there a recommended, good fill that is reasonably easy to install and will not require half of the boat to be redone? Marek 1994 C270 "Legato" Ottawa, ON From: kelly petew Sent: 29 September, 2020 12:22 To: cnc-list@cnc-list.com Subject: Stus-List Advice for replace/repair of worn Diesel Deck Fill Cap The deck fill caps on my 30-2 require a winch handle to remove. The diesel cap has worn to the point where the winch head [of the handle] no longer fits well. Has anyone found a suitable replacement? I see several possibilities at Defender, but I'm concerned the threading won't match exactly. Or, has anyone made a "plug" or insert for the deck fill, maybe a large hex nut welded to a threaded rod? Thanks, Pete Winters Siren Song 1991 C&C30-2 Deltaville, Va.
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray