FYI. Shipping has gone up appreciably lately. Sent from my Android. Please forgive typos. Thank you.
________________________________ From: Hoyt, Mike via CnC-List <cnc-list@cnc-list.com> Sent: Friday, July 9, 2021 3:19:12 PM To: 'Stus-List' <cnc-list@cnc-list.com> Cc: Hoyt, Mike <mike.h...@impgroup.com> Subject: Stus-List Re: Old Harken Roller II Hi Danny I once sold a complete roller furling assembly off a previous boat. The one thing I learned the hard way is that Loc Tite is used when the foils are assembled. Don’t forget to apply heat to the set screws before removal or it may not be so pretty. I used UPS for the shipping. Sent along with a RF headsail so shipping was something like $150 at the time. Regards Mike Hoyt Persistence Halifax, NS From: Danny Haughey via CnC-List <cnc-list@cnc-list.com> Sent: July 9, 2021 4:09 PM To: cnc-list@cnc-list.com Cc: Danny Haughey <djhaug...@juno.com> Subject: Stus-List Re: Old Harken Roller II OK so, Steve Mallet was the first to respond and he's looking for the lower stuff. I'm in Rehoboth Massachusetts. I'm sure the foils can be shipped. Just need a longer box and its all about cost from there. The thing is still completely assembled at the boatyard, in a rack, currently in Barrington RI. I'll have to try and get over there and start pulling it apart. Although, time is always the issue, My boat is now in Mattapoisett Ma in the completely opposite direction. I'll see what I can do about getting it apart. No one seems to be in a big hurry, would these just be spares to have on hand? I think the first thing to do is get the thing broken down and out of the boatyard. I'll keep you all posted on how that goes. Danny ---------- Original Message ---------- From: dukatolla--- via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> To: Danny Haughey via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Cc: "dukato...@hotmail.com<mailto:dukato...@hotmail.com>" <dukato...@hotmail.com<mailto:dukato...@hotmail.com>> Subject: Stus-List Re: Old Harken Roller II Date: Fri, 9 Jul 2021 16:51:45 +0000 (UTC) Hi Danny, I have a Harken II Unit 1 Same as Bruno.... Spare Connectors and a Foil......would be a great thing to have in the parts department. Cheers Johnny Wright 1970 C&C36R Sault Ste Marie, Ontario, Canada On Friday, July 9, 2021, 11:19:32 a.m. EDT, Danny Haughey via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: HI Guys, I replaced my old harken roller furler with a new Sheafer. Before I toss it, I thought I'd see if anyone needed any parts. Maybe I should send it to one of the used boat parts places. At least maybe it could go to use rather than being trashed... I replaced the old harken traveler too. So, I still have that laying around. Danny Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray <https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=04%7C01%7C%7C17cffdb424984352664c08d9430e73c0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637614551607971241%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=TTesUmSBUT1OaZFBuS5l9qMPBgJrIeV8CWZXV6Q9pV4%3D&reserved=0> Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
