That sounds like a hard job On Sat, Aug 21, 2021 at 8:16 AM dwight veinot via CnC-List < cnc-list@cnc-list.com> wrote:
> In dealing with my fuel pump replacement I discovered that the exhaust > system is in dire need of repair. Has anyone with this engine ever tried to > remove the flange that connects the exhaust pipe to the exhaust manifold. > My exhaust pipe has broken and is leaking black exhaust gas and now copious > amounts of water into the engine compartment. It is attached to the > manifold with 3 bolts (studs). The upper 2 bolts are accessible and after a > couple applications of penetrating oil (50/50 ATF/acetone) I was able to > get them loose. The 3rd bolt however is hidden and it seems I may have to > remove the heat exchanger to even get a 14 mm wrench on it. I am hoping > someone may have discovered a “secret” aside from turning the job over to > someone else. -- > Sent from Gmail Mobile > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu -- Joel Delamirande *www.jdroofing.ca <http://www.jdroofing.ca>*
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
