Thanks, Mike! On Mon, Sep 20, 2021, 6:20 PM Mike Macdonald via CnC-List < cnc-list@cnc-list.com> wrote:
> Those are about the best you can get > > Sent from my iPhone > > On Sep 20, 2021, at 5:40 PM, Brian Davis via CnC-List < > cnc-list@cnc-list.com> wrote: > > > Good evening fellow C&C'ers. > > Hope this email finds you all well. > > I've recently hauled Nina, '80 Landfall 38. Getting ready to sand and > paint her bottom and hull. Whilst waiting for the south Florida rainy > season to taper off and cool down some, I'm pulling the prop, changing the > stuffing box, and figured I would put new cutlass bearings as well. Is > there a particular type of cutlass that anyone can recommend? I was > looking at this website, but not exactly sure what to consider. I prefer > using the absolute best. > > > https://www.deepblueyachtsupply.com/brass-cutlass-bearing#/specFilters=17!%23-!309!-%23!8m!%23-!36&pageSize=21&viewMode=list&orderBy=15&pageNumber=1 > > Thanks in advance for any suggestions and comments. > > Regards, > Brian > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu