Or Google "4 point socket" Ken H.
On Thu, 23 Sept 2021 at 16:55, andrew macLean via CnC-List < cnc-list@cnc-list.com> wrote: > I’d love to use something more like a socket. I’m not familiar with 12 > point sockets. I’ll go look at google now. Thanks! > > On Sep 23, 2021, at 12:41 pm, Bill Coleman via CnC-List < > cnc-list@cnc-list.com> wrote: > > Or would a 12 point socket work? > > Bill Coleman > > On Thu, Sep 23, 2021, 3:35 AM Bob Tallman via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Great toy store indeed. Make sure to keep the length to a minimum to >> avoid too much rocking. >> For grins regarding the size, is it 7/16, or is it 1/2? >> Just thinking if the measurements are in line with a ratchet drive, the >> square stock could be just a double ended female and use a ratchet drive. >> A socket will fit over the square shaft, and then you can use a standard >> setup to crank the boom. >> >> Who is the manufacturer of the furling boom? >> Picture or two of the interface in question? >> >> >> On Wed, Sep 22, 2021 at 9:57 PM Dennis C. via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> Go to mcmaster.com and order a piece of square tubing the correct >>> size. When you get it, drill holes through one end and put a screwdriver >>> or long bolt through it. Use it to square up the boom. >>> >>> https://www.mcmaster.com/square-tubing/ >>> >>> -- >>> Dennis C. >>> Touche' 35-1 #83 >>> Mandeville, LA >>> >>> On Wed, Sep 22, 2021 at 6:29 PM andrew_m--- via CnC-List < >>> cnc-list@cnc-list.com> wrote: >>> >>> We recently purchased a 1974 C&C 30 mk1. Our boat has a roller furling >>> boom, but didn?t come with the crank handle. Does anyone know where I can a >>> get a crank handle for the roller furling boom on a 1974 C&C 30 mk1? have >>> one I can borrow (we're near Victoria BC)? or know of another tool that'll >>> work in place of the original crank handle? Our boom's stuck at about 30 >>> degrees from where it should be and I'd love to turn it back. >>> Thanks to all of the subscribers that contributed to the list to help >>> with the costs involved. If you want to show your support to the list - >>> use PayPal to send contribution -- https://www.paypal.me/stumurray >>> Thanks - Stu >>> >>> >>> >>> -- >>> Dennis C. >>> Touche' 35-1 #83 >>> Mandeville, LA >>> Thanks to all of the subscribers that contributed to the list to help >>> with the costs involved. If you want to show your support to the list - use >>> PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - >>> Stu >> >> -- >> Regards, >> >> Bob Tallman >> 631.387.6748 >> Thanks to all of the subscribers that contributed to the list to help >> with the costs involved. If you want to show your support to the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> Thanks - Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu