Mike, I have 37 and I share your pain in getting to the stuffing box area; I
went with the PYI and have been happy with it; there are other brands which
seem to do well also; I just didn't want to crawl down in there on a frequent
basis, and bit the bullet on the new shaft...; best of luck with your 36!
Richard
1986 C&C 37 CB; Ohio River, Mile 596;
Richard N. Bush Law Offices2950 Breckenridge Lane, Suite NineLouisville,
Kentucky 40220(502) 584-7255
On Thursday, April 4, 2024 at 10:33:40 PM EDT, Mike Nicholls via CnC-List
<cnc-list@cnc-list.com> wrote:
John,
I replaced my flax packing with Tefpak along with Teflon lubricant. I am
continually adjusting the stuffing box to get an appropriate drip rate of 1-2
drops/min with the shaft rotating. The drip continues when the engine is not
running. Fortunately my boat is a 35 Mark III with easy access to the stuffing
box. (Only minimal boat yoga needed to access the stuffing box). If your
access is poor my recommendation is to continue with flax.
Mike Nicholls
From: John McCrea via CnC-List [mailto:cnc-list@cnc-list.com]
Sent: April 4, 2024 4:08 PM
To: 'Stus-List'
Cc: johnmcc...@comcast.net
Subject: Stus-List Re: 36-1 Stuffing Box Access.
Thanks John.
From: John Read via CnC-List <cnc-list@cnc-list.com>
Sent: Thursday, April 4, 2024 7:06 PM
To: Stus-List <cnc-list@cnc-list.com>
Cc: John Read <johnprea...@gmail.com>
Subject: Stus-List Re: 36-1 Stuffing Box Access.
Hi John. Teflon packing works great. Check with Brer Rabbit. Their 33-1
engine is mounted backwards with a v drive so the stuffing box is under the
engine so limited access. Hope this helps John of the 34 aforementioned.
On Thu, Apr 4, 2024, 7:00 PM John McCrea via CnC-List <cnc-list@cnc-list.com>
wrote:
36-1 Owners,
Hello. I am looking for any insight into how any 36 owners have managed the
lack of access to the stuffing box. Each time I want to get it, we have to pull
the muffler, and then the access is still very limited. On the other 3 boats I
have owned, it was a piece of cake. I'm not sure what they were thinking.
I looked into the PYI system, but my yard wanted to cut the shaft and put in a
new one. It is less than 10 years old, so that is a no-go. We are going to pack
with Teflon instead of the old-style flax that was in there and hope for better
results. But having to adjust it once it is in the water is a real challenge. I
have seen the access on the later model 34, and I am very jealous. Thanks.
John McCrea
Talisman
1979 36-1
Mystic, CT
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu
