Thanks for the suggestions guys, but I'm still not having any luck. I can't connect to the Qube at all - I tried to connect using the serial port, but I don't see anything - I did confirm that the CONSOLE ON was set at powerup, and I read the manual for the terminal settings required.
I tried choosing 'reset network' from the LCD Panel, then powered down (I had to do this manually, as reset network didn't power down automatically). When I booted the Qube3, it prompts me to Auto Configure. If I chose Yes - it hangs. If I choose No, it hangs... It won't let me do anything - and I have to hit the power switch... :-( At this point, I don't care about what's on the Qube3, I just need to bring it back up - I'll do an OS Restore, whatever, I just don't know how to do an OS Restore if I can't connect to the Qube3... I'm at a loss. Does anyone have any other suggestions? Thanks, E -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of William L. Thomson Jr. Sent: Thursday, June 20, 2002 07:29 PM To: Cobalt Developers Group Subject: Re: [cobalt-developers] Applied patch to Qube3, and now I can'taccess it... Have you tried to ping the machine to see if it can see and talk to the network? If you can ping, you may want to port scan to see if telnet and ftp are up. If you cannot ping then that will explain why everything else does not work. You could try the console suggestion, but I would assume at that point you may be beyond a point that you can fix it yourself. For the sake of time and speed I would recommend doing and OS restore and then proceeding as you did before. You may want to also install SSH from http://www.pkgmaster.com before any other packages. That way as you upgrade the rest you can also log in via a resource that will not be modified by the upgrades. For example if the upgrade is upgrading telnet and it fails you can't get it. If you had SSH then you could. So install what ever in order to install SSH first, you may not need to upgrade anything before installing SSH. Then once SSH is up and running, then begin to update the rest in order. On Thu, 2002-06-20 at 16:21, Earl wrote: > I started applying the Qube patches to my Qube3 in the order as per > KB011003-000006 Update Order for the Qube3. > > I installed the first 2 patches, and it worked fine. When I installed > Cobalt OS 6.1, it said it would reboot, which it did, and I could > access the Qube. > > When I installed Cobalt OS 6.2, it again, said it would reboot. > > After rebooting, I can no longer access the Qube. It just doesn't > respond. > > I tried using the panel at the back to verify Network Settings, but > when I select Network settings, it acts as if I chose cancel - just > returning to the status display, which indicates my domain and ip. > > I tried rebooting - this menu option worked, but no change. > > I did a shutdown, then turned off the Qube3 and restarted it - with > the same result. > > I have tried to access my Qube using telnet and FTP, with no luck. > > Does anyone have any suggestions? > > Thanks, > > Earl > > _______________________________________________ > cobalt-developers mailing list [EMAIL PROTECTED] > http://list.cobalt.com/mailman/listinfo/cobalt-developers > -- Sincerely, William L. Thomson Jr. Obsidian-Studios, Inc. 439 Amber Way Petaluma, Ca. 94952 Phone 707.766.9509 Fax 707.766.8989 http://www.obsidian-studios.com _______________________________________________ cobalt-developers mailing list [EMAIL PROTECTED] http://list.cobalt.com/mailman/listinfo/cobalt-developers _______________________________________________ cobalt-developers mailing list [EMAIL PROTECTED] http://list.cobalt.com/mailman/listinfo/cobalt-developers
