I've been experiencing a fairly severe problem with one of my newer RaQ 550's ( I have a number of them), and am looking for feedback to indicate whether this is an isolated issue, or a wider problem.
After running perfectly for a month or so, the machine began to exhibit a symptom where it would take an extremely long time to respond to updates made in the admin desktop, i.e. adding a user, or new virtual site, and act generally lethargic from the command line. After issuing a reboot command, the machine will not come back up, and displays a kernel panic on the front panel LCD, and then cycles for another attempt at a reboot. Swapping the hard drives into another chassis, the problem will follow the drives. Re-building the install from the original CD will cure the problem, but at the expense of dumping all the old data. One may conclude that this may indicate a problem with the drive(s), but I've had the same machine exhibit this behavior 3 time over a 3 month period with 3 different sets of drives installed, while the original drives continue to work flawlessly in different RaQ 550 chassis. Do I ship this machine back?? I'm at a loss to explain this bizarre behavior. John Kraft CIO / Wild Promotions, Inc. _______________________________________________ cobalt-developers mailing list [EMAIL PROTECTED] http://list.cobalt.com/mailman/listinfo/cobalt-developers
