Jasper Capel wrote:
> You'll want to set your eth0 and eth1 to bonding "slave", and create a
> new interface "bond0", which you set to master, and set your bonding
> options on. You should then be good to go.
>
>
not quite ....
usr/lib/python2.4/site-packages/pykickstart/parser.py", line 1124, in
readKickstart
self.readKickstart (args[1])
<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next
screen File
"/usr/lib/python2.4/site-packages/pykickstart/parser.py", line 1071, in
readKickstart
fh = open(file)
IOError: [Errno 2] No such file or directory:
'/tmp/pre_install_network_config'
install exited
abnormally [1/1]
sending termination signals...done
sending kill signals...done
disabling swap...
unmounting filesystems...
/mnt/runtime
done
disabling /dev/loop0
/proc done
/dev/pts done
/sys done
/tmp/ramfs done
/selinux done
you may safely reboot your system
thats the traceback from the console
and this is the system report for the network on that box
interface : bond0
mac address :
bonding : master
bonding_master :
bonding_opts : mode=1 primary=eth0 arp_interval=60
arp_ip_target=192.168.11.1
is static? : True
ip address : 192.168.11.4
subnet : 255.255.255.0
static routes : []
dns name :
dhcp tag :
virt bridge : xenbr0
interface : eth0
mac address : 00:16:3E:59:16:91
bonding : slave
bonding_master :
bonding_opts :
is static? : True
ip address :
subnet :
static routes : []
dns name :
dhcp tag :
virt bridge : xenbr0
interface : eth1
mac address : 00:16:3e:5b:bb:05
bonding : slave
bonding_master : eth0
bonding_opts :
is static? : True
ip address :
subnet :
static routes : []
dns name :
dhcp tag :
virt bridge : xenbr0
which looks OK i think
_______________________________________________
cobbler mailing list
[email protected]
https://fedorahosted.org/mailman/listinfo/cobbler
