Dear Shai, I tried everything ... double checking for identical customizations, removing customization (all of them on MultiButton) etc. nothing helped. After removing piece by piece of changes that I made to the form (in code) I think I found the culprit. The problem is caused by the call of the hideTabs() function. As soon as I removed this call everything worked as expected (no more double sized elements). I would really like to have Tabs element without tab "buttons". Is this something you can easily fix on your part? Or do you know for a good workaround?
While testing swiping on iOS I noticed an "ugly" feature. If I pull down the content of the tab (like pull for refresh) and at the same time swipe to the next tab, when I go back to the tab, the content stays at the same position as it was during previous swipe from the pull (but it should go up). The same can be observed on simulator also. On Android is ok, since I cannot pull down the content. Can I prevent this behaviour on iOS also (pull down, since I do not need it)? Thank you. Best regards, CS -- You received this message because you are subscribed to the Google Groups "CodenameOne Discussions" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/codenameone-discussions. To view this discussion on the web visit https://groups.google.com/d/msgid/codenameone-discussions/fe787589-85dc-4666-97d6-d1b608352424%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
