Send commitlog mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.openmoko.org/mailman/listinfo/commitlog
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reach the person managing the list at
[EMAIL PROTECTED]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of commitlog digest..."
Today's Topics:
1. r2350 - trunk/src/target/kernel/patches
([EMAIL PROTECTED])
--- Begin Message ---
Author: laforge
Date: 2007-06-27 18:12:31 +0200 (Wed, 27 Jun 2007)
New Revision: 2350
Modified:
trunk/src/target/kernel/patches/gta02-core.patch
Log:
GTA02: use GLAMO GPIO SPI bit-banging
Modified: trunk/src/target/kernel/patches/gta02-core.patch
===================================================================
--- trunk/src/target/kernel/patches/gta02-core.patch 2007-06-27 16:11:38 UTC
(rev 2349)
+++ trunk/src/target/kernel/patches/gta02-core.patch 2007-06-27 16:12:31 UTC
(rev 2350)
@@ -2,7 +2,7 @@
===================================================================
--- /dev/null
+++ linux-2.6.21.3-moko/arch/arm/mach-s3c2440/mach-gta02.c
-@@ -0,0 +1,610 @@
+@@ -0,0 +1,625 @@
+/*
+ * linux/arch/arm/mach-s3c2440/mach-gta02.c
+ *
@@ -72,6 +72,7 @@
+#include <asm/arch/spi-gpio.h>
+#include <asm/arch/usb-control.h>
+
++#include <asm/arch/gta01.h>
+#include <asm/arch/gta02.h>
+
+#include <asm/plat-s3c24xx/devs.h>
@@ -406,6 +407,15 @@
+ .board_info = gta02_spi_board_info,
+};
+
++static struct glamo_spigpio_info glamo_spigpio_cfg = {
++ .pin_clk = GLAMO_GPIO10_OUTPUT,
++ .pin_mosi = GLAMO_GPIO11_OUTPUT,
++ .pin_cs = GLAMO_GPIO12_OUTPUT,
++ .pin_miso = 0,
++ .board_size = ARRAY_SIZE(gta02_spi_board_info),
++ .board_info = gta02_spi_board_info,
++};
++
+#if 0
+#ifdef SPI_HARD
+static struct s3c2410_spi_info spi_cfg = {
@@ -535,7 +545,8 @@
+ .max = 16,
+ .defval = 16,
+ },
-+ .spi_info = &glamo_spi_cfg,
++ //.spi_info = &glamo_spi_cfg,
++ .spigpio_info = &glamo_spigpio_cfg,
+};
+
+static struct resource gta02_glamo_resources[] = {
@@ -598,6 +609,10 @@
+
+ s3c2410_pm_init();
+
++ /* Set LCD_RESET / XRES to high */
++ s3c2410_gpio_cfgpin(GTA01_GPIO_LCD_RESET, S3C2410_GPIO_OUTPUT);
++ s3c2410_gpio_setpin(GTA01_GPIO_LCD_RESET, 1);
++
+ set_irq_type(GTA02_IRQ_MODEM, IRQT_RISING);
+ request_irq(GTA02_IRQ_MODEM, gta02_modem_irq,
+ SA_INTERRUPT, "modem", NULL);
--- End Message ---
_______________________________________________
commitlog mailing list
[email protected]
http://lists.openmoko.org/mailman/listinfo/commitlog
