http://git-wip-us.apache.org/repos/asf/ambari/blob/e7d07030/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/nagios.cfg.j2 ---------------------------------------------------------------------- diff --git a/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/nagios.cfg.j2 b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/nagios.cfg.j2 new file mode 100644 index 0000000..bcff8ac --- /dev/null +++ b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/nagios.cfg.j2 @@ -0,0 +1,1365 @@ +{# +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +#} + +############################################################################## +# +# NAGIOS.CFG - Sample Main Config File for Nagios 3.2.3 +# +# Read the documentation for more information on this configuration +# file. I've provided some comments here, but things may not be so +# clear without further explanation. +# +# Last Modified: 12-14-2008 +# +############################################################################## + +# +# +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +# KIND, either express or implied. See the License for the +# specific language governing permissions and limitations +# under the License. +# +# + +# LOG FILE +# This is the main log file where service and host events are logged +# for historical purposes. This should be the first option specified +# in the config file!!! + +log_file=/var/log/nagios/nagios.log + + +# OBJECT CONFIGURATION FILE(S) +# These are the object configuration files in which you define hosts, +# host groups, contacts, contact groups, services, etc. +# You can split your object definitions across several config files +# if you wish (as shown below), or keep them all in a single config file. + +{% for cfg_file in cfg_files %} +cfg_file={{cfg_file}} +{% endfor %} + +# Definitions for monitoring the local (Linux) host +#cfg_file={{conf_dir}}/objects/localhost.cfg + +# Definitions for monitoring a Windows machine +#cfg_file={{conf_dir}}/objects/windows.cfg + +# Definitions for monitoring a router/switch +#cfg_file={{conf_dir}}/objects/switch.cfg + +# Definitions for monitoring a network printer +#cfg_file={{conf_dir}}/objects/printer.cfg + +# Definitions for hadoop servers +cfg_file={{nagios_host_cfg}} +cfg_file={{nagios_hostgroup_cfg}} +cfg_file={{nagios_servicegroup_cfg}} +cfg_file={{nagios_service_cfg}} +cfg_file={{nagios_command_cfg}} + + +# You can also tell Nagios to process all config files (with a .cfg +# extension) in a particular directory by using the cfg_dir +# directive as shown below: + +#cfg_dir={{conf_dir}}/servers +#cfg_dir={{conf_dir}}/printers +#cfg_dir={{conf_dir}}/switches +#cfg_dir={{conf_dir}}/routers + + + + +# OBJECT CACHE FILE +# This option determines where object definitions are cached when +# Nagios starts/restarts. The CGIs read object definitions from +# this cache file (rather than looking at the object config files +# directly) in order to prevent inconsistencies that can occur +# when the config files are modified after Nagios starts. + +object_cache_file=/var/nagios/objects.cache + + + +# PRE-CACHED OBJECT FILE +# This options determines the location of the precached object file. +# If you run Nagios with the -p command line option, it will preprocess +# your object configuration file(s) and write the cached config to this +# file. You can then start Nagios with the -u option to have it read +# object definitions from this precached file, rather than the standard +# object configuration files (see the cfg_file and cfg_dir options above). +# Using a precached object file can speed up the time needed to (re)start +# the Nagios process if you've got a large and/or complex configuration. +# Read the documentation section on optimizing Nagios to find our more +# about how this feature works. + +precached_object_file=/var/nagios/objects.precache + + + +# RESOURCE FILE +# This is an optional resource file that contains $USERx$ macro +# definitions. Multiple resource files can be specified by using +# multiple resource_file definitions. The CGIs will not attempt to +# read the contents of resource files, so information that is +# considered to be sensitive (usernames, passwords, etc) can be +# defined as macros in this file and restrictive permissions (600) +# can be placed on this file. + +resource_file={{nagios_resource_cfg}} + + + +# STATUS FILE +# This is where the current status of all monitored services and +# hosts is stored. Its contents are read and processed by the CGIs. +# The contents of the status file are deleted every time Nagios +# restarts. + +status_file=/var/nagios/status.dat + + + +# STATUS FILE UPDATE INTERVAL +# This option determines the frequency (in seconds) that +# Nagios will periodically dump program, host, and +# service status data. + +status_update_interval=10 + + + +# NAGIOS USER +# This determines the effective user that Nagios should run as. +# You can either supply a username or a UID. + +nagios_user={{nagios_user}} + + + +# NAGIOS GROUP +# This determines the effective group that Nagios should run as. +# You can either supply a group name or a GID. + +nagios_group={{nagios_group}} + + + +# EXTERNAL COMMAND OPTION +# This option allows you to specify whether or not Nagios should check +# for external commands (in the command file defined below). By default +# Nagios will *not* check for external commands, just to be on the +# cautious side. If you want to be able to use the CGI command interface +# you will have to enable this. +# Values: 0 = disable commands, 1 = enable commands + +check_external_commands=1 + + + +# EXTERNAL COMMAND CHECK INTERVAL +# This is the interval at which Nagios should check for external commands. +# This value works of the interval_length you specify later. If you leave +# that at its default value of 60 (seconds), a value of 1 here will cause +# Nagios to check for external commands every minute. If you specify a +# number followed by an "s" (i.e. 15s), this will be interpreted to mean +# actual seconds rather than a multiple of the interval_length variable. +# Note: In addition to reading the external command file at regularly +# scheduled intervals, Nagios will also check for external commands after +# event handlers are executed. +# NOTE: Setting this value to -1 causes Nagios to check the external +# command file as often as possible. + +#command_check_interval=15s +command_check_interval=-1 + + + +# EXTERNAL COMMAND FILE +# This is the file that Nagios checks for external command requests. +# It is also where the command CGI will write commands that are submitted +# by users, so it must be writeable by the user that the web server +# is running as (usually 'nobody'). Permissions should be set at the +# directory level instead of on the file, as the file is deleted every +# time its contents are processed. + +command_file=/var/nagios/rw/nagios.cmd + + + +# EXTERNAL COMMAND BUFFER SLOTS +# This settings is used to tweak the number of items or "slots" that +# the Nagios daemon should allocate to the buffer that holds incoming +# external commands before they are processed. As external commands +# are processed by the daemon, they are removed from the buffer. + +external_command_buffer_slots=4096 + + + +# LOCK FILE +# This is the lockfile that Nagios will use to store its PID number +# in when it is running in daemon mode. + +lock_file={{nagios_pid_file}} + + + +# TEMP FILE +# This is a temporary file that is used as scratch space when Nagios +# updates the status log, cleans the comment file, etc. This file +# is created, used, and deleted throughout the time that Nagios is +# running. + +temp_file=/var/nagios/nagios.tmp + + + +# TEMP PATH +# This is path where Nagios can create temp files for service and +# host check results, etc. + +temp_path=/tmp + + + +# EVENT BROKER OPTIONS +# Controls what (if any) data gets sent to the event broker. +# Values: 0 = Broker nothing +# -1 = Broker everything +# <other> = See documentation + +event_broker_options=-1 + + + +# EVENT BROKER MODULE(S) +# This directive is used to specify an event broker module that should +# by loaded by Nagios at startup. Use multiple directives if you want +# to load more than one module. Arguments that should be passed to +# the module at startup are seperated from the module path by a space. +# +#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +# WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING +#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +# +# Do NOT overwrite modules while they are being used by Nagios or Nagios +# will crash in a fiery display of SEGFAULT glory. This is a bug/limitation +# either in dlopen(), the kernel, and/or the filesystem. And maybe Nagios... +# +# The correct/safe way of updating a module is by using one of these methods: +# 1. Shutdown Nagios, replace the module file, restart Nagios +# 2. Delete the original module file, move the new module file into place, restart Nagios +# +# Example: +# +# broker_module=<modulepath> [moduleargs] + +#broker_module=/somewhere/module1.o +#broker_module=/somewhere/module2.o arg1 arg2=3 debug=0 + + + +# LOG ROTATION METHOD +# This is the log rotation method that Nagios should use to rotate +# the main log file. Values are as follows.. +# n = None - don't rotate the log +# h = Hourly rotation (top of the hour) +# d = Daily rotation (midnight every day) +# w = Weekly rotation (midnight on Saturday evening) +# m = Monthly rotation (midnight last day of month) + +log_rotation_method=d + + + +# LOG ARCHIVE PATH +# This is the directory where archived (rotated) log files should be +# placed (assuming you've chosen to do log rotation). + +log_archive_path=/var/log/nagios/archives + + + +# LOGGING OPTIONS +# If you want messages logged to the syslog facility, as well as the +# Nagios log file set this option to 1. If not, set it to 0. + +use_syslog=1 + + + +# NOTIFICATION LOGGING OPTION +# If you don't want notifications to be logged, set this value to 0. +# If notifications should be logged, set the value to 1. + +log_notifications=1 + + + +# SERVICE RETRY LOGGING OPTION +# If you don't want service check retries to be logged, set this value +# to 0. If retries should be logged, set the value to 1. + +log_service_retries=1 + + + +# HOST RETRY LOGGING OPTION +# If you don't want host check retries to be logged, set this value to +# 0. If retries should be logged, set the value to 1. + +log_host_retries=1 + + + +# EVENT HANDLER LOGGING OPTION +# If you don't want host and service event handlers to be logged, set +# this value to 0. If event handlers should be logged, set the value +# to 1. + +log_event_handlers=1 + + + +# INITIAL STATES LOGGING OPTION +# If you want Nagios to log all initial host and service states to +# the main log file (the first time the service or host is checked) +# you can enable this option by setting this value to 1. If you +# are not using an external application that does long term state +# statistics reporting, you do not need to enable this option. In +# this case, set the value to 0. + +log_initial_states=0 + + + +# EXTERNAL COMMANDS LOGGING OPTION +# If you don't want Nagios to log external commands, set this value +# to 0. If external commands should be logged, set this value to 1. +# Note: This option does not include logging of passive service +# checks - see the option below for controlling whether or not +# passive checks are logged. + +log_external_commands=1 + + + +# PASSIVE CHECKS LOGGING OPTION +# If you don't want Nagios to log passive host and service checks, set +# this value to 0. If passive checks should be logged, set +# this value to 1. + +log_passive_checks=1 + + + +# GLOBAL HOST AND SERVICE EVENT HANDLERS +# These options allow you to specify a host and service event handler +# command that is to be run for every host or service state change. +# The global event handler is executed immediately prior to the event +# handler that you have optionally specified in each host or +# service definition. The command argument is the short name of a +# command definition that you define in your host configuration file. +# Read the HTML docs for more information. + +#global_host_event_handler=somecommand +#global_service_event_handler=somecommand + + + +# SERVICE INTER-CHECK DELAY METHOD +# This is the method that Nagios should use when initially +# "spreading out" service checks when it starts monitoring. The +# default is to use smart delay calculation, which will try to +# space all service checks out evenly to minimize CPU load. +# Using the dumb setting will cause all checks to be scheduled +# at the same time (with no delay between them)! This is not a +# good thing for production, but is useful when testing the +# parallelization functionality. +# n = None - don't use any delay between checks +# d = Use a "dumb" delay of 1 second between checks +# s = Use "smart" inter-check delay calculation +# x.xx = Use an inter-check delay of x.xx seconds + +service_inter_check_delay_method=s + + + +# MAXIMUM SERVICE CHECK SPREAD +# This variable determines the timeframe (in minutes) from the +# program start time that an initial check of all services should +# be completed. Default is 30 minutes. + +max_service_check_spread=30 + + + +# SERVICE CHECK INTERLEAVE FACTOR +# This variable determines how service checks are interleaved. +# Interleaving the service checks allows for a more even +# distribution of service checks and reduced load on remote +# hosts. Setting this value to 1 is equivalent to how versions +# of Nagios previous to 0.0.5 did service checks. Set this +# value to s (smart) for automatic calculation of the interleave +# factor unless you have a specific reason to change it. +# s = Use "smart" interleave factor calculation +# x = Use an interleave factor of x, where x is a +# number greater than or equal to 1. + +service_interleave_factor=s + + + +# HOST INTER-CHECK DELAY METHOD +# This is the method that Nagios should use when initially +# "spreading out" host checks when it starts monitoring. The +# default is to use smart delay calculation, which will try to +# space all host checks out evenly to minimize CPU load. +# Using the dumb setting will cause all checks to be scheduled +# at the same time (with no delay between them)! +# n = None - don't use any delay between checks +# d = Use a "dumb" delay of 1 second between checks +# s = Use "smart" inter-check delay calculation +# x.xx = Use an inter-check delay of x.xx seconds + +host_inter_check_delay_method=s + + + +# MAXIMUM HOST CHECK SPREAD +# This variable determines the timeframe (in minutes) from the +# program start time that an initial check of all hosts should +# be completed. Default is 30 minutes. + +max_host_check_spread=30 + + + +# MAXIMUM CONCURRENT SERVICE CHECKS +# This option allows you to specify the maximum number of +# service checks that can be run in parallel at any given time. +# Specifying a value of 1 for this variable essentially prevents +# any service checks from being parallelized. A value of 0 +# will not restrict the number of concurrent checks that are +# being executed. + +max_concurrent_checks=0 + + + +# HOST AND SERVICE CHECK REAPER FREQUENCY +# This is the frequency (in seconds!) that Nagios will process +# the results of host and service checks. + +check_result_reaper_frequency=10 + + + + +# MAX CHECK RESULT REAPER TIME +# This is the max amount of time (in seconds) that a single +# check result reaper event will be allowed to run before +# returning control back to Nagios so it can perform other +# duties. + +max_check_result_reaper_time=30 + + + + +# CHECK RESULT PATH +# This is directory where Nagios stores the results of host and +# service checks that have not yet been processed. +# +# Note: Make sure that only one instance of Nagios has access +# to this directory! + +check_result_path=/var/nagios/spool/checkresults + + + + +# MAX CHECK RESULT FILE AGE +# This option determines the maximum age (in seconds) which check +# result files are considered to be valid. Files older than this +# threshold will be mercilessly deleted without further processing. + +max_check_result_file_age=3600 + + + + +# CACHED HOST CHECK HORIZON +# This option determines the maximum amount of time (in seconds) +# that the state of a previous host check is considered current. +# Cached host states (from host checks that were performed more +# recently that the timeframe specified by this value) can immensely +# improve performance in regards to the host check logic. +# Too high of a value for this option may result in inaccurate host +# states being used by Nagios, while a lower value may result in a +# performance hit for host checks. Use a value of 0 to disable host +# check caching. + +cached_host_check_horizon=15 + + + +# CACHED SERVICE CHECK HORIZON +# This option determines the maximum amount of time (in seconds) +# that the state of a previous service check is considered current. +# Cached service states (from service checks that were performed more +# recently that the timeframe specified by this value) can immensely +# improve performance in regards to predictive dependency checks. +# Use a value of 0 to disable service check caching. + +cached_service_check_horizon=15 + + + +# ENABLE PREDICTIVE HOST DEPENDENCY CHECKS +# This option determines whether or not Nagios will attempt to execute +# checks of hosts when it predicts that future dependency logic test +# may be needed. These predictive checks can help ensure that your +# host dependency logic works well. +# Values: +# 0 = Disable predictive checks +# 1 = Enable predictive checks (default) + +enable_predictive_host_dependency_checks=1 + + + +# ENABLE PREDICTIVE SERVICE DEPENDENCY CHECKS +# This option determines whether or not Nagios will attempt to execute +# checks of service when it predicts that future dependency logic test +# may be needed. These predictive checks can help ensure that your +# service dependency logic works well. +# Values: +# 0 = Disable predictive checks +# 1 = Enable predictive checks (default) + +enable_predictive_service_dependency_checks=1 + + + +# SOFT STATE DEPENDENCIES +# This option determines whether or not Nagios will use soft state +# information when checking host and service dependencies. Normally +# Nagios will only use the latest hard host or service state when +# checking dependencies. If you want it to use the latest state (regardless +# of whether its a soft or hard state type), enable this option. +# Values: +# 0 = Don't use soft state dependencies (default) +# 1 = Use soft state dependencies + +soft_state_dependencies=0 + + + +# TIME CHANGE ADJUSTMENT THRESHOLDS +# These options determine when Nagios will react to detected changes +# in system time (either forward or backwards). + +#time_change_threshold=900 + + + +# AUTO-RESCHEDULING OPTION +# This option determines whether or not Nagios will attempt to +# automatically reschedule active host and service checks to +# "smooth" them out over time. This can help balance the load on +# the monitoring server. +# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE +# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY + +auto_reschedule_checks=0 + + + +# AUTO-RESCHEDULING INTERVAL +# This option determines how often (in seconds) Nagios will +# attempt to automatically reschedule checks. This option only +# has an effect if the auto_reschedule_checks option is enabled. +# Default is 30 seconds. +# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE +# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY + +auto_rescheduling_interval=30 + + + +# AUTO-RESCHEDULING WINDOW +# This option determines the "window" of time (in seconds) that +# Nagios will look at when automatically rescheduling checks. +# Only host and service checks that occur in the next X seconds +# (determined by this variable) will be rescheduled. This option +# only has an effect if the auto_reschedule_checks option is +# enabled. Default is 180 seconds (3 minutes). +# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE +# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY + +auto_rescheduling_window=180 + + + +# SLEEP TIME +# This is the number of seconds to sleep between checking for system +# events and service checks that need to be run. + +sleep_time=0.25 + + + +# TIMEOUT VALUES +# These options control how much time Nagios will allow various +# types of commands to execute before killing them off. Options +# are available for controlling maximum time allotted for +# service checks, host checks, event handlers, notifications, the +# ocsp command, and performance data commands. All values are in +# seconds. + +service_check_timeout=60 +host_check_timeout=30 +event_handler_timeout=30 +notification_timeout=30 +ocsp_timeout=5 +perfdata_timeout=5 + + + +# RETAIN STATE INFORMATION +# This setting determines whether or not Nagios will save state +# information for services and hosts before it shuts down. Upon +# startup Nagios will reload all saved service and host state +# information before starting to monitor. This is useful for +# maintaining long-term data on state statistics, etc, but will +# slow Nagios down a bit when it (re)starts. Since its only +# a one-time penalty, I think its well worth the additional +# startup delay. + +retain_state_information=1 + + + +# STATE RETENTION FILE +# This is the file that Nagios should use to store host and +# service state information before it shuts down. The state +# information in this file is also read immediately prior to +# starting to monitor the network when Nagios is restarted. +# This file is used only if the retain_state_information +# variable is set to 1. + +state_retention_file=/var/nagios/retention.dat + + + +# RETENTION DATA UPDATE INTERVAL +# This setting determines how often (in minutes) that Nagios +# will automatically save retention data during normal operation. +# If you set this value to 0, Nagios will not save retention +# data at regular interval, but it will still save retention +# data before shutting down or restarting. If you have disabled +# state retention, this option has no effect. + +retention_update_interval=60 + + + +# USE RETAINED PROGRAM STATE +# This setting determines whether or not Nagios will set +# program status variables based on the values saved in the +# retention file. If you want to use retained program status +# information, set this value to 1. If not, set this value +# to 0. + +use_retained_program_state=1 + + + +# USE RETAINED SCHEDULING INFO +# This setting determines whether or not Nagios will retain +# the scheduling info (next check time) for hosts and services +# based on the values saved in the retention file. If you +# If you want to use retained scheduling info, set this +# value to 1. If not, set this value to 0. + +use_retained_scheduling_info=1 + + + +# RETAINED ATTRIBUTE MASKS (ADVANCED FEATURE) +# The following variables are used to specify specific host and +# service attributes that should *not* be retained by Nagios during +# program restarts. +# +# The values of the masks are bitwise ANDs of values specified +# by the "MODATTR_" definitions found in include/common.h. +# For example, if you do not want the current enabled/disabled state +# of flap detection and event handlers for hosts to be retained, you +# would use a value of 24 for the host attribute mask... +# MODATTR_EVENT_HANDLER_ENABLED (8) + MODATTR_FLAP_DETECTION_ENABLED (16) = 24 + +# This mask determines what host attributes are not retained +retained_host_attribute_mask=0 + +# This mask determines what service attributes are not retained +retained_service_attribute_mask=0 + +# These two masks determine what process attributes are not retained. +# There are two masks, because some process attributes have host and service +# options. For example, you can disable active host checks, but leave active +# service checks enabled. +retained_process_host_attribute_mask=0 +retained_process_service_attribute_mask=0 + +# These two masks determine what contact attributes are not retained. +# There are two masks, because some contact attributes have host and +# service options. For example, you can disable host notifications for +# a contact, but leave service notifications enabled for them. +retained_contact_host_attribute_mask=0 +retained_contact_service_attribute_mask=0 + + + +# INTERVAL LENGTH +# This is the seconds per unit interval as used in the +# host/contact/service configuration files. Setting this to 60 means +# that each interval is one minute long (60 seconds). Other settings +# have not been tested much, so your mileage is likely to vary... + +interval_length=60 + + + +# CHECK FOR UPDATES +# This option determines whether Nagios will automatically check to +# see if new updates (releases) are available. It is recommend that you +# enable this option to ensure that you stay on top of the latest critical +# patches to Nagios. Nagios is critical to you - make sure you keep it in +# good shape. Nagios will check once a day for new updates. Data collected +# by Nagios Enterprises from the update check is processed in accordance +# with our privacy policy - see http://api.nagios.org for details. + +check_for_updates=1 + + + +# BARE UPDATE CHECK +# This option deterines what data Nagios will send to api.nagios.org when +# it checks for updates. By default, Nagios will send information on the +# current version of Nagios you have installed, as well as an indicator as +# to whether this was a new installation or not. Nagios Enterprises uses +# this data to determine the number of users running specific version of +# Nagios. Enable this option if you do not want this information to be sent. + +bare_update_check=0 + + + +# AGGRESSIVE HOST CHECKING OPTION +# If you don't want to turn on aggressive host checking features, set +# this value to 0 (the default). Otherwise set this value to 1 to +# enable the aggressive check option. Read the docs for more info +# on what aggressive host check is or check out the source code in +# base/checks.c + +use_aggressive_host_checking=0 + + + +# SERVICE CHECK EXECUTION OPTION +# This determines whether or not Nagios will actively execute +# service checks when it initially starts. If this option is +# disabled, checks are not actively made, but Nagios can still +# receive and process passive check results that come in. Unless +# you're implementing redundant hosts or have a special need for +# disabling the execution of service checks, leave this enabled! +# Values: 1 = enable checks, 0 = disable checks + +execute_service_checks=1 + + + +# PASSIVE SERVICE CHECK ACCEPTANCE OPTION +# This determines whether or not Nagios will accept passive +# service checks results when it initially (re)starts. +# Values: 1 = accept passive checks, 0 = reject passive checks + +accept_passive_service_checks=1 + + + +# HOST CHECK EXECUTION OPTION +# This determines whether or not Nagios will actively execute +# host checks when it initially starts. If this option is +# disabled, checks are not actively made, but Nagios can still +# receive and process passive check results that come in. Unless +# you're implementing redundant hosts or have a special need for +# disabling the execution of host checks, leave this enabled! +# Values: 1 = enable checks, 0 = disable checks + +execute_host_checks=1 + + + +# PASSIVE HOST CHECK ACCEPTANCE OPTION +# This determines whether or not Nagios will accept passive +# host checks results when it initially (re)starts. +# Values: 1 = accept passive checks, 0 = reject passive checks + +accept_passive_host_checks=1 + + + +# NOTIFICATIONS OPTION +# This determines whether or not Nagios will sent out any host or +# service notifications when it is initially (re)started. +# Values: 1 = enable notifications, 0 = disable notifications + +enable_notifications=1 + + + +# EVENT HANDLER USE OPTION +# This determines whether or not Nagios will run any host or +# service event handlers when it is initially (re)started. Unless +# you're implementing redundant hosts, leave this option enabled. +# Values: 1 = enable event handlers, 0 = disable event handlers + +enable_event_handlers=1 + + + +# PROCESS PERFORMANCE DATA OPTION +# This determines whether or not Nagios will process performance +# data returned from service and host checks. If this option is +# enabled, host performance data will be processed using the +# host_perfdata_command (defined below) and service performance +# data will be processed using the service_perfdata_command (also +# defined below). Read the HTML docs for more information on +# performance data. +# Values: 1 = process performance data, 0 = do not process performance data + +process_performance_data=0 + + + +# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS +# These commands are run after every host and service check is +# performed. These commands are executed only if the +# enable_performance_data option (above) is set to 1. The command +# argument is the short name of a command definition that you +# define in your host configuration file. Read the HTML docs for +# more information on performance data. + +#host_perfdata_command=process-host-perfdata +#service_perfdata_command=process-service-perfdata + + + +# HOST AND SERVICE PERFORMANCE DATA FILES +# These files are used to store host and service performance data. +# Performance data is only written to these files if the +# enable_performance_data option (above) is set to 1. + +#host_perfdata_file=/tmp/host-perfdata +#service_perfdata_file=/tmp/service-perfdata + + + +# HOST AND SERVICE PERFORMANCE DATA FILE TEMPLATES +# These options determine what data is written (and how) to the +# performance data files. The templates may contain macros, special +# characters (\t for tab, \r for carriage return, \n for newline) +# and plain text. A newline is automatically added after each write +# to the performance data file. Some examples of what you can do are +# shown below. + +#host_perfdata_file_template=[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$ +#service_perfdata_file_template=[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$ + + + +# HOST AND SERVICE PERFORMANCE DATA FILE MODES +# This option determines whether or not the host and service +# performance data files are opened in write ("w") or append ("a") +# mode. If you want to use named pipes, you should use the special +# pipe ("p") mode which avoid blocking at startup, otherwise you will +# likely want the defult append ("a") mode. + +#host_perfdata_file_mode=a +#service_perfdata_file_mode=a + + + +# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING INTERVAL +# These options determine how often (in seconds) the host and service +# performance data files are processed using the commands defined +# below. A value of 0 indicates the files should not be periodically +# processed. + +#host_perfdata_file_processing_interval=0 +#service_perfdata_file_processing_interval=0 + + + +# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING COMMANDS +# These commands are used to periodically process the host and +# service performance data files. The interval at which the +# processing occurs is determined by the options above. + +#host_perfdata_file_processing_command=process-host-perfdata-file +#service_perfdata_file_processing_command=process-service-perfdata-file + + + +# OBSESS OVER SERVICE CHECKS OPTION +# This determines whether or not Nagios will obsess over service +# checks and run the ocsp_command defined below. Unless you're +# planning on implementing distributed monitoring, do not enable +# this option. Read the HTML docs for more information on +# implementing distributed monitoring. +# Values: 1 = obsess over services, 0 = do not obsess (default) + +obsess_over_services=0 + + + +# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND +# This is the command that is run for every service check that is +# processed by Nagios. This command is executed only if the +# obsess_over_services option (above) is set to 1. The command +# argument is the short name of a command definition that you +# define in your host configuration file. Read the HTML docs for +# more information on implementing distributed monitoring. + +#ocsp_command=somecommand + + + +# OBSESS OVER HOST CHECKS OPTION +# This determines whether or not Nagios will obsess over host +# checks and run the ochp_command defined below. Unless you're +# planning on implementing distributed monitoring, do not enable +# this option. Read the HTML docs for more information on +# implementing distributed monitoring. +# Values: 1 = obsess over hosts, 0 = do not obsess (default) + +obsess_over_hosts=0 + + + +# OBSESSIVE COMPULSIVE HOST PROCESSOR COMMAND +# This is the command that is run for every host check that is +# processed by Nagios. This command is executed only if the +# obsess_over_hosts option (above) is set to 1. The command +# argument is the short name of a command definition that you +# define in your host configuration file. Read the HTML docs for +# more information on implementing distributed monitoring. + +#ochp_command=somecommand + + + +# TRANSLATE PASSIVE HOST CHECKS OPTION +# This determines whether or not Nagios will translate +# DOWN/UNREACHABLE passive host check results into their proper +# state for this instance of Nagios. This option is useful +# if you have distributed or failover monitoring setup. In +# these cases your other Nagios servers probably have a different +# "view" of the network, with regards to the parent/child relationship +# of hosts. If a distributed monitoring server thinks a host +# is DOWN, it may actually be UNREACHABLE from the point of +# this Nagios instance. Enabling this option will tell Nagios +# to translate any DOWN or UNREACHABLE host states it receives +# passively into the correct state from the view of this server. +# Values: 1 = perform translation, 0 = do not translate (default) + +translate_passive_host_checks=0 + + + +# PASSIVE HOST CHECKS ARE SOFT OPTION +# This determines whether or not Nagios will treat passive host +# checks as being HARD or SOFT. By default, a passive host check +# result will put a host into a HARD state type. This can be changed +# by enabling this option. +# Values: 0 = passive checks are HARD, 1 = passive checks are SOFT + +passive_host_checks_are_soft=0 + + + +# ORPHANED HOST/SERVICE CHECK OPTIONS +# These options determine whether or not Nagios will periodically +# check for orphaned host service checks. Since service checks are +# not rescheduled until the results of their previous execution +# instance are processed, there exists a possibility that some +# checks may never get rescheduled. A similar situation exists for +# host checks, although the exact scheduling details differ a bit +# from service checks. Orphaned checks seem to be a rare +# problem and should not happen under normal circumstances. +# If you have problems with service checks never getting +# rescheduled, make sure you have orphaned service checks enabled. +# Values: 1 = enable checks, 0 = disable checks + +check_for_orphaned_services=1 +check_for_orphaned_hosts=1 + + + +# SERVICE FRESHNESS CHECK OPTION +# This option determines whether or not Nagios will periodically +# check the "freshness" of service results. Enabling this option +# is useful for ensuring passive checks are received in a timely +# manner. +# Values: 1 = enabled freshness checking, 0 = disable freshness checking + +check_service_freshness=0 + + + +# SERVICE FRESHNESS CHECK INTERVAL +# This setting determines how often (in seconds) Nagios will +# check the "freshness" of service check results. If you have +# disabled service freshness checking, this option has no effect. + +service_freshness_check_interval=60 + + + +# HOST FRESHNESS CHECK OPTION +# This option determines whether or not Nagios will periodically +# check the "freshness" of host results. Enabling this option +# is useful for ensuring passive checks are received in a timely +# manner. +# Values: 1 = enabled freshness checking, 0 = disable freshness checking + +check_host_freshness=0 + + + +# HOST FRESHNESS CHECK INTERVAL +# This setting determines how often (in seconds) Nagios will +# check the "freshness" of host check results. If you have +# disabled host freshness checking, this option has no effect. + +host_freshness_check_interval=60 + + + + +# ADDITIONAL FRESHNESS THRESHOLD LATENCY +# This setting determines the number of seconds that Nagios +# will add to any host and service freshness thresholds that +# it calculates (those not explicitly specified by the user). + +additional_freshness_latency=15 + + + + +# FLAP DETECTION OPTION +# This option determines whether or not Nagios will try +# and detect hosts and services that are "flapping". +# Flapping occurs when a host or service changes between +# states too frequently. When Nagios detects that a +# host or service is flapping, it will temporarily suppress +# notifications for that host/service until it stops +# flapping. Flap detection is very experimental, so read +# the HTML documentation before enabling this feature! +# Values: 1 = enable flap detection +# 0 = disable flap detection (default) + +enable_flap_detection=1 + + + +# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES +# Read the HTML documentation on flap detection for +# an explanation of what this option does. This option +# has no effect if flap detection is disabled. + +low_service_flap_threshold=5.0 +high_service_flap_threshold=20.0 +low_host_flap_threshold=5.0 +high_host_flap_threshold=20.0 + + + +# DATE FORMAT OPTION +# This option determines how short dates are displayed. Valid options +# include: +# us (MM-DD-YYYY HH:MM:SS) +# euro (DD-MM-YYYY HH:MM:SS) +# iso8601 (YYYY-MM-DD HH:MM:SS) +# strict-iso8601 (YYYY-MM-DDTHH:MM:SS) +# + +date_format=us + + + + +# TIMEZONE OFFSET +# This option is used to override the default timezone that this +# instance of Nagios runs in. If not specified, Nagios will use +# the system configured timezone. +# +# NOTE: In order to display the correct timezone in the CGIs, you +# will also need to alter the Apache directives for the CGI path +# to include your timezone. Example: +# +# <Directory "/usr/local/nagios/sbin/"> +# SetEnv TZ "Australia/Brisbane" +# ... +# </Directory> + +#use_timezone=US/Mountain +#use_timezone=Australia/Brisbane + + + + +# P1.PL FILE LOCATION +# This value determines where the p1.pl perl script (used by the +# embedded Perl interpreter) is located. If you didn't compile +# Nagios with embedded Perl support, this option has no effect. + +p1_file = {{nagios_p1_pl}} + + + +# EMBEDDED PERL INTERPRETER OPTION +# This option determines whether or not the embedded Perl interpreter +# will be enabled during runtime. This option has no effect if Nagios +# has not been compiled with support for embedded Perl. +# Values: 0 = disable interpreter, 1 = enable interpreter + +enable_embedded_perl=1 + + + +# EMBEDDED PERL USAGE OPTION +# This option determines whether or not Nagios will process Perl plugins +# and scripts with the embedded Perl interpreter if the plugins/scripts +# do not explicitly indicate whether or not it is okay to do so. Read +# the HTML documentation on the embedded Perl interpreter for more +# information on how this option works. + +use_embedded_perl_implicitly=1 + + + +# ILLEGAL OBJECT NAME CHARACTERS +# This option allows you to specify illegal characters that cannot +# be used in host names, service descriptions, or names of other +# object types. + +illegal_object_name_chars=`~!$%^&*|'"<>?,()= + + + +# ILLEGAL MACRO OUTPUT CHARACTERS +# This option allows you to specify illegal characters that are +# stripped from macros before being used in notifications, event +# handlers, etc. This DOES NOT affect macros used in service or +# host check commands. +# The following macros are stripped of the characters you specify: +# $HOSTOUTPUT$ +# $HOSTPERFDATA$ +# $HOSTACKAUTHOR$ +# $HOSTACKCOMMENT$ +# $SERVICEOUTPUT$ +# $SERVICEPERFDATA$ +# $SERVICEACKAUTHOR$ +# $SERVICEACKCOMMENT$ + +illegal_macro_output_chars=`~$&|'"<> + + + +# REGULAR EXPRESSION MATCHING +# This option controls whether or not regular expression matching +# takes place in the object config files. Regular expression +# matching is used to match host, hostgroup, service, and service +# group names/descriptions in some fields of various object types. +# Values: 1 = enable regexp matching, 0 = disable regexp matching + +use_regexp_matching=0 + + + +# "TRUE" REGULAR EXPRESSION MATCHING +# This option controls whether or not "true" regular expression +# matching takes place in the object config files. This option +# only has an effect if regular expression matching is enabled +# (see above). If this option is DISABLED, regular expression +# matching only occurs if a string contains wildcard characters +# (* and ?). If the option is ENABLED, regexp matching occurs +# all the time (which can be annoying). +# Values: 1 = enable true matching, 0 = disable true matching + +use_true_regexp_matching=0 + + + +# ADMINISTRATOR EMAIL/PAGER ADDRESSES +# The email and pager address of a global administrator (likely you). +# Nagios never uses these values itself, but you can access them by +# using the $ADMINEMAIL$ and $ADMINPAGER$ macros in your notification +# commands. + +admin_email=nagios@localhost +admin_pager=pagenagios@localhost + + + +# DAEMON CORE DUMP OPTION +# This option determines whether or not Nagios is allowed to create +# a core dump when it runs as a daemon. Note that it is generally +# considered bad form to allow this, but it may be useful for +# debugging purposes. Enabling this option doesn't guarantee that +# a core file will be produced, but that's just life... +# Values: 1 - Allow core dumps +# 0 - Do not allow core dumps (default) + +daemon_dumps_core=0 + + + +# LARGE INSTALLATION TWEAKS OPTION +# This option determines whether or not Nagios will take some shortcuts +# which can save on memory and CPU usage in large Nagios installations. +# Read the documentation for more information on the benefits/tradeoffs +# of enabling this option. +# Values: 1 - Enabled tweaks +# 0 - Disable tweaks (default) + +use_large_installation_tweaks=1 + + + +# ENABLE ENVIRONMENT MACROS +# This option determines whether or not Nagios will make all standard +# macros available as environment variables when host/service checks +# and system commands (event handlers, notifications, etc.) are +# executed. Enabling this option can cause performance issues in +# large installations, as it will consume a bit more memory and (more +# importantly) consume more CPU. +# Values: 1 - Enable environment variable macros (default) +# 0 - Disable environment variable macros + +# NAGIOS_* macros are required for Ambari Maintenance Mode (mm_wrapper.py) +enable_environment_macros=1 + + + +# CHILD PROCESS MEMORY OPTION +# This option determines whether or not Nagios will free memory in +# child processes (processed used to execute system commands and host/ +# service checks). If you specify a value here, it will override +# program defaults. +# Value: 1 - Free memory in child processes +# 0 - Do not free memory in child processes + +#free_child_process_memory=1 + + + +# CHILD PROCESS FORKING BEHAVIOR +# This option determines how Nagios will fork child processes +# (used to execute system commands and host/service checks). Normally +# child processes are fork()ed twice, which provides a very high level +# of isolation from problems. Fork()ing once is probably enough and will +# save a great deal on CPU usage (in large installs), so you might +# want to consider using this. If you specify a value here, it will +# program defaults. +# Value: 1 - Child processes fork() twice +# 0 - Child processes fork() just once + +#child_processes_fork_twice=1 + + + +# DEBUG LEVEL +# This option determines how much (if any) debugging information will +# be written to the debug file. OR values together to log multiple +# types of information. +# Values: +# -1 = Everything +# 0 = Nothing +# 1 = Functions +# 2 = Configuration +# 4 = Process information +# 8 = Scheduled events +# 16 = Host/service checks +# 32 = Notifications +# 64 = Event broker +# 128 = External commands +# 256 = Commands +# 512 = Scheduled downtime +# 1024 = Comments +# 2048 = Macros + +debug_level=0 + + + +# DEBUG VERBOSITY +# This option determines how verbose the debug log out will be. +# Values: 0 = Brief output +# 1 = More detailed +# 2 = Very detailed + +debug_verbosity=1 + + + +# DEBUG FILE +# This option determines where Nagios should write debugging information. + +debug_file=/var/log/nagios/nagios.debug + + + +# MAX DEBUG FILE SIZE +# This option determines the maximum size (in bytes) of the debug file. If +# the file grows larger than this size, it will be renamed with a .old +# extension. If a file already exists with a .old extension it will +# automatically be deleted. This helps ensure your disk space usage doesn't +# get out of control when debugging Nagios. + +max_debug_file_size=1000000 + +
http://git-wip-us.apache.org/repos/asf/ambari/blob/e7d07030/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/nagios.conf.j2 ---------------------------------------------------------------------- diff --git a/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/nagios.conf.j2 b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/nagios.conf.j2 new file mode 100644 index 0000000..f415e65 --- /dev/null +++ b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/nagios.conf.j2 @@ -0,0 +1,84 @@ +{# +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +#} + +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +# KIND, either express or implied. See the License for the +# specific language governing permissions and limitations +# under the License. +# + +# +# SAMPLE CONFIG SNIPPETS FOR APACHE WEB SERVER +# Last Modified: 11-26-2005 +# +# This file contains examples of entries that need +# to be incorporated into your Apache web server +# configuration file. Customize the paths, etc. as +# needed to fit your system. +# + +ScriptAlias {{cgi_weblink}} "{{cgi_dir}}" + +<Directory "{{cgi_dir}}"> +# SSLRequireSSL + Options ExecCGI + AllowOverride None + Order allow,deny + Allow from all +# Order deny,allow +# Deny from all +# Allow from 127.0.0.1 + AuthName "Nagios Access" + AuthType Basic + AuthUserFile {{conf_dir}}/htpasswd.users + Require valid-user +</Directory> + +Alias /nagios "{{nagios_web_dir}}" +{# Ubuntu has different nagios url #} +{% if os_family == "ubuntu" %} +Alias /nagios3 "{{nagios_web_dir}}" +{% endif %} + +<Directory "{{nagios_web_dir}}"> +# SSLRequireSSL + Options FollowSymLinks + AllowOverride None + Order allow,deny + Allow from all +# Order deny,allow +# Deny from all +# Allow from 127.0.0.1 + AuthName "Nagios Access" + AuthType Basic + AuthUserFile {{conf_dir}}/htpasswd.users + Require valid-user +</Directory> + http://git-wip-us.apache.org/repos/asf/ambari/blob/e7d07030/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/nagios.j2 ---------------------------------------------------------------------- diff --git a/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/nagios.j2 b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/nagios.j2 new file mode 100644 index 0000000..0927915 --- /dev/null +++ b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/nagios.j2 @@ -0,0 +1,164 @@ +{# +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +#} + +#!/bin/sh +# $Id$ +# Nagios Startup script for the Nagios monitoring daemon +# +# chkconfig: - 85 15 +# description: Nagios is a service monitoring system +# processname: nagios +# config: /etc/nagios/nagios.cfg +# pidfile: /var/nagios/nagios.pid +# +### BEGIN INIT INFO +# Provides: nagios +# Required-Start: $local_fs $syslog $network +# Required-Stop: $local_fs $syslog $network +# Short-Description: start and stop Nagios monitoring server +# Description: Nagios is is a service monitoring system +### END INIT INFO + +# +# +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +# KIND, either express or implied. See the License for the +# specific language governing permissions and limitations +# under the License. +# +# +# + +# Source function library. +. /etc/rc.d/init.d/functions + +prefix="/usr" +exec_prefix="/usr" +exec="/usr/sbin/nagios" +prog="nagios" +config="{{conf_dir}}/nagios.cfg" +pidfile="{{nagios_pid_file}}" +user="{{nagios_user}}" + +[ -e /etc/sysconfig/$prog ] && . /etc/sysconfig/$prog + +lockfile=/var/lock/subsys/$prog + +start() { + [ -x $exec ] || exit 5 + [ -f $config ] || exit 6 + echo -n $"Starting $prog: " + daemon --user=$user $exec -d $config + retval=$? + echo + [ $retval -eq 0 ] && touch $lockfile + return $retval +} + +stop() { + echo -n $"Stopping $prog: " + killproc -d 10 $exec + retval=$? + echo + [ $retval -eq 0 ] && rm -f $lockfile + return $retval +} + + +restart() { + stop + start +} + +reload() { + echo -n $"Reloading $prog: " + killproc $exec -HUP + RETVAL=$? + echo +} + +force_reload() { + restart +} + +check_config() { + $nice runuser -s /bin/bash - $user -c "$corelimit >/dev/null 2>&1 ; $exec -v $config > /dev/null 2>&1" + RETVAL=$? + if [ $RETVAL -ne 0 ] ; then + echo -n $"Configuration validation failed" + failure + echo + exit 1 + + fi +} + + +case "$1" in + start) + status $prog && exit 0 + check_config + $1 + ;; + stop) + status $prog|| exit 0 + $1 + ;; + restart) + check_config + $1 + ;; + reload) + status $prog || exit 7 + check_config + $1 + ;; + force-reload) + check_config + force_reload + ;; + status) + status $prog + ;; + condrestart|try-restart) + status $prog|| exit 0 + check_config + restart + ;; + configtest) + echo -n $"Checking config for $prog: " + check_config && success + echo + ;; + *) + echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload|configtest}" + exit 2 +esac +exit $? http://git-wip-us.apache.org/repos/asf/ambari/blob/e7d07030/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/resource.cfg.j2 ---------------------------------------------------------------------- diff --git a/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/resource.cfg.j2 b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/resource.cfg.j2 new file mode 100644 index 0000000..291d90f --- /dev/null +++ b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/NAGIOS/package/templates/resource.cfg.j2 @@ -0,0 +1,51 @@ +{# + Licensed to the Apache Software Foundation (ASF) under one + or more contributor license agreements. See the NOTICE file + distributed with this work for additional information + regarding copyright ownership. The ASF licenses this file + to you under the Apache License, Version 2.0 (the + "License"); you may not use this file except in compliance + with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +#} + +########################################################################### +# +# RESOURCE.CFG - Sample Resource File for Nagios 3.2.3 +# +# Last Modified: 09-10-2003 +# +# You can define $USERx$ macros in this file, which can in turn be used +# in command definitions in your host config file(s). $USERx$ macros are +# useful for storing sensitive information such as usernames, passwords, +# etc. They are also handy for specifying the path to plugins and +# event handlers - if you decide to move the plugins or event handlers to +# a different directory in the future, you can just update one or two +# $USERx$ macros, instead of modifying a lot of command definitions. +# +# The CGIs will not attempt to read the contents of resource files, so +# you can set restrictive permissions (600 or 660) on them. +# +# Nagios supports up to 32 $USERx$ macros ($USER1$ through $USER32$) +# +# Resource files may also be used to store configuration directives for +# external data sources like MySQL... +# +########################################################################### + +# Sets $USER1$ to be the path to the plugins +$USER1$={{plugins_dir}} + +# Sets $USER2$ to be the path to event handlers +#$USER2$={{eventhandlers_dir}} + +# Store some usernames and passwords (hidden from the CGIs) +#$USER3$=someuser +#$USER4$=somepassword \ No newline at end of file http://git-wip-us.apache.org/repos/asf/ambari/blob/e7d07030/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/configuration/oozie-env.xml ---------------------------------------------------------------------- diff --git a/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/configuration/oozie-env.xml b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/configuration/oozie-env.xml new file mode 100644 index 0000000..88f5a1b --- /dev/null +++ b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/configuration/oozie-env.xml @@ -0,0 +1,129 @@ +<?xml version="1.0"?> +<?xml-stylesheet type="text/xsl" href="configuration.xsl"?> +<!-- +/** + * Licensed to the Apache Software Foundation (ASF) under one + * or more contributor license agreements. See the NOTICE file + * distributed with this work for additional information + * regarding copyright ownership. The ASF licenses this file + * to you under the Apache License, Version 2.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +--> + +<configuration> + <property> + <name>oozie_user</name> + <value>oozie</value> + <property-type>USER</property-type> + <description>Oozie User.</description> + </property> + <property> + <name>oozie_database</name> + <value>New Derby Database</value> + <description>Oozie Server Database.</description> + </property> + <property> + <name>oozie_derby_database</name> + <value>Derby</value> + <description>Oozie Derby Database</description> + </property> + <property> + <name>oozie_data_dir</name> + <value>/hadoop/oozie/data</value> + <description>Data directory in which the Oozie DB exists</description> + </property> + <property> + <name>oozie_log_dir</name> + <value>/var/log/oozie</value> + <description>Directory for oozie logs</description> + </property> + <property> + <name>oozie_pid_dir</name> + <value>/var/run/oozie</value> + <description>Directory in which the pid files for oozie reside.</description> + </property> + <property> + <name>oozie_admin_port</name> + <value>11001</value> + <description>The admin port Oozie server runs.</description> + </property> + + <!-- oozie-env.sh --> + <property> + <name>content</name> + <description>This is the jinja template for oozie-env.sh file</description> + <value> +#!/bin/bash + +if [ -d "/usr/lib/phd-tomcat" ]; then + export OOZIE_CONFIG=${OOZIE_CONFIG:-/etc/oozie/conf} + export CATALINA_BASE=${CATALINA_BASE:-{{oozie_server_dir}}} + export CATALINA_TMPDIR=${CATALINA_TMPDIR:-/var/tmp/oozie} + export OOZIE_CATALINA_HOME=/usr/lib/phd-tomcat +fi + +#Set JAVA HOME +export JAVA_HOME={{java_home}} + +export JRE_HOME=${JAVA_HOME} + +# Set Oozie specific environment variables here. + +# Settings for the Embedded Tomcat that runs Oozie +# Java System properties for Oozie should be specified in this variable +# +# export CATALINA_OPTS= + +# Oozie configuration file to load from Oozie configuration directory +# +# export OOZIE_CONFIG_FILE=oozie-site.xml + +# Oozie logs directory +# +export OOZIE_LOG={{oozie_log_dir}} + +# Oozie pid directory +# +export CATALINA_PID={{pid_file}} + +#Location of the data for oozie +export OOZIE_DATA={{oozie_data_dir}} + +# Oozie Log4J configuration file to load from Oozie configuration directory +# +# export OOZIE_LOG4J_FILE=oozie-log4j.properties + +# Reload interval of the Log4J configuration file, in seconds +# +# export OOZIE_LOG4J_RELOAD=10 + +# The port Oozie server runs +# +export OOZIE_HTTP_PORT={{oozie_server_port}} + +# The admin port Oozie server runs +# +export OOZIE_ADMIN_PORT={{oozie_server_admin_port}} + +# The host name Oozie server runs on +# +# export OOZIE_HTTP_HOSTNAME=`hostname -f` + +# The base URL for callback URLs to Oozie +# +# export OOZIE_BASE_URL="http://${OOZIE_HTTP_HOSTNAME}:${OOZIE_HTTP_PORT}/oozie"; +export JAVA_LIBRARY_PATH={{hadoop_lib_home}}/native/Linux-amd64-64 + </value> + </property> + +</configuration> http://git-wip-us.apache.org/repos/asf/ambari/blob/e7d07030/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/configuration/oozie-log4j.xml ---------------------------------------------------------------------- diff --git a/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/configuration/oozie-log4j.xml b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/configuration/oozie-log4j.xml new file mode 100644 index 0000000..7f7158f --- /dev/null +++ b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/configuration/oozie-log4j.xml @@ -0,0 +1,97 @@ +<?xml version="1.0"?> +<?xml-stylesheet type="text/xsl" href="configuration.xsl"?> +<!-- +/** + * Licensed to the Apache Software Foundation (ASF) under one + * or more contributor license agreements. See the NOTICE file + * distributed with this work for additional information + * regarding copyright ownership. The ASF licenses this file + * to you under the Apache License, Version 2.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +--> + +<configuration supports_final="false"> + + <property> + <name>content</name> + <description>Custom log4j.properties</description> + <value> +# +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. See accompanying LICENSE file. +# + +# If the Java System property 'oozie.log.dir' is not defined at Oozie start up time +# XLogService sets its value to '${oozie.home}/logs' + +log4j.appender.oozie=org.apache.log4j.DailyRollingFileAppender +log4j.appender.oozie.DatePattern='.'yyyy-MM-dd-HH +log4j.appender.oozie.File=${oozie.log.dir}/oozie.log +log4j.appender.oozie.Append=true +log4j.appender.oozie.layout=org.apache.log4j.PatternLayout +log4j.appender.oozie.layout.ConversionPattern=%d{ISO8601} %5p %c{1}:%L - SERVER[${oozie.instance.id}] %m%n + +log4j.appender.oozieops=org.apache.log4j.DailyRollingFileAppender +log4j.appender.oozieops.DatePattern='.'yyyy-MM-dd +log4j.appender.oozieops.File=${oozie.log.dir}/oozie-ops.log +log4j.appender.oozieops.Append=true +log4j.appender.oozieops.layout=org.apache.log4j.PatternLayout +log4j.appender.oozieops.layout.ConversionPattern=%d{ISO8601} %5p %c{1}:%L - %m%n + +log4j.appender.oozieinstrumentation=org.apache.log4j.DailyRollingFileAppender +log4j.appender.oozieinstrumentation.DatePattern='.'yyyy-MM-dd +log4j.appender.oozieinstrumentation.File=${oozie.log.dir}/oozie-instrumentation.log +log4j.appender.oozieinstrumentation.Append=true +log4j.appender.oozieinstrumentation.layout=org.apache.log4j.PatternLayout +log4j.appender.oozieinstrumentation.layout.ConversionPattern=%d{ISO8601} %5p %c{1}:%L - %m%n + +log4j.appender.oozieaudit=org.apache.log4j.DailyRollingFileAppender +log4j.appender.oozieaudit.DatePattern='.'yyyy-MM-dd +log4j.appender.oozieaudit.File=${oozie.log.dir}/oozie-audit.log +log4j.appender.oozieaudit.Append=true +log4j.appender.oozieaudit.layout=org.apache.log4j.PatternLayout +log4j.appender.oozieaudit.layout.ConversionPattern=%d{ISO8601} %5p %c{1}:%L - %m%n + +log4j.appender.openjpa=org.apache.log4j.DailyRollingFileAppender +log4j.appender.openjpa.DatePattern='.'yyyy-MM-dd +log4j.appender.openjpa.File=${oozie.log.dir}/oozie-jpa.log +log4j.appender.openjpa.Append=true +log4j.appender.openjpa.layout=org.apache.log4j.PatternLayout +log4j.appender.openjpa.layout.ConversionPattern=%d{ISO8601} %5p %c{1}:%L - %m%n + +log4j.logger.openjpa=INFO, openjpa +log4j.logger.oozieops=INFO, oozieops +log4j.logger.oozieinstrumentation=ALL, oozieinstrumentation +log4j.logger.oozieaudit=ALL, oozieaudit +log4j.logger.org.apache.oozie=INFO, oozie +log4j.logger.org.apache.hadoop=WARN, oozie +log4j.logger.org.mortbay=WARN, oozie +log4j.logger.org.hsqldb=WARN, oozie +log4j.logger.org.apache.hadoop.security.authentication.server=INFO, oozie + </value> + </property> + +</configuration> http://git-wip-us.apache.org/repos/asf/ambari/blob/e7d07030/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/configuration/oozie-site.xml ---------------------------------------------------------------------- diff --git a/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/configuration/oozie-site.xml b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/configuration/oozie-site.xml new file mode 100644 index 0000000..e72a8be --- /dev/null +++ b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/configuration/oozie-site.xml @@ -0,0 +1,312 @@ +<?xml version="1.0"?> +<!-- + Licensed to the Apache Software Foundation (ASF) under one + or more contributor license agreements. See the NOTICE file + distributed with this work for additional information + regarding copyright ownership. The ASF licenses this file + to you under the Apache License, Version 2.0 (the + "License"); you may not use this file except in compliance + with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +--> + +<configuration supports_final="true"> + + <!-- + Refer to the oozie-default.xml file for the complete list of + Oozie configuration properties and their default values. + --> + <property> + <name>oozie.base.url</name> + <value>http://localhost:11000/oozie</value> + <description>Base Oozie URL.</description> + </property> + + <property> + <name>oozie.system.id</name> + <value>oozie-${user.name}</value> + <description> + The Oozie system ID. + </description> + </property> + + <property> + <name>oozie.systemmode</name> + <value>NORMAL</value> + <description> + System mode for Oozie at startup. + </description> + </property> + + <property> + <name>oozie.service.AuthorizationService.security.enabled</name> + <value>true</value> + <description> + Specifies whether security (user name/admin role) is enabled or not. + If disabled any user can manage Oozie system and manage any job. + </description> + </property> + + <property> + <name>oozie.service.PurgeService.older.than</name> + <value>30</value> + <description> + Jobs older than this value, in days, will be purged by the PurgeService. + </description> + </property> + + <property> + <name>oozie.service.PurgeService.purge.interval</name> + <value>3600</value> + <description> + Interval at which the purge service will run, in seconds. + </description> + </property> + + <property> + <name>oozie.service.CallableQueueService.queue.size</name> + <value>1000</value> + <description>Max callable queue size</description> + </property> + + <property> + <name>oozie.service.CallableQueueService.threads</name> + <value>10</value> + <description>Number of threads used for executing callables</description> + </property> + + <property> + <name>oozie.service.CallableQueueService.callable.concurrency</name> + <value>3</value> + <description> + Maximum concurrency for a given callable type. + Each command is a callable type (submit, start, run, signal, job, jobs, suspend,resume, etc). + Each action type is a callable type (Map-Reduce, Pig, SSH, FS, sub-workflow, etc). + All commands that use action executors (action-start, action-end, action-kill and action-check) use + the action type as the callable type. + </description> + </property> + + <property> + <name>oozie.service.coord.normal.default.timeout</name> + <value>120</value> + <description>Default timeout for a coordinator action input check (in minutes) for normal job. + -1 means infinite timeout + </description> + </property> + + <property> + <name>oozie.db.schema.name</name> + <value>oozie</value> + <description> + Oozie DataBase Name + </description> + </property> + + <property> + <name>oozie.authentication.type</name> + <value>simple</value> + <description> + Authentication used for Oozie HTTP endpoint, the supported values are: simple | kerberos | + #AUTHENTICATION_HANDLER_CLASSNAME#. + </description> + </property> + + <property> + <name>oozie.service.WorkflowAppService.system.libpath</name> + <value>/user/${user.name}/share/lib</value> + <description> + System library path to use for workflow applications. + This path is added to workflow application if their job properties sets + the property 'oozie.use.system.libpath' to true. + </description> + </property> + + <property> + <name>use.system.libpath.for.mapreduce.and.pig.jobs</name> + <value>false</value> + <description> + If set to true, submissions of MapReduce and Pig jobs will include + automatically the system library path, thus not requiring users to + specify where the Pig JAR files are. Instead, the ones from the system + library path are used. + </description> + </property> + <property> + <name>oozie.authentication.kerberos.name.rules</name> + <value> + RULE:[2:$1@$0]([jt]t@.*TODO-KERBEROS-DOMAIN)s/.*/TODO-MAPREDUSER/ + RULE:[2:$1@$0]([nd]n@.*TODO-KERBEROS-DOMAIN)s/.*/TODO-HDFSUSER/ + RULE:[2:$1@$0](hm@.*TODO-KERBEROS-DOMAIN)s/.*/TODO-HBASE-USER/ + RULE:[2:$1@$0](rs@.*TODO-KERBEROS-DOMAIN)s/.*/TODO-HBASE-USER/ + DEFAULT + </value> + <description>The mapping from kerberos principal names to local OS user names.</description> + </property> + <property> + <name>oozie.service.HadoopAccessorService.hadoop.configurations</name> + <value>*=/etc/hadoop/conf</value> + <description> + Comma separated AUTHORITY=HADOOP_CONF_DIR, where AUTHORITY is the HOST:PORT of + the Hadoop service (JobTracker, HDFS). The wildcard '*' configuration is + used when there is no exact match for an authority. The HADOOP_CONF_DIR contains + the relevant Hadoop *-site.xml files. If the path is relative is looked within + the Oozie configuration directory; though the path can be absolute (i.e. to point + to Hadoop client conf/ directories in the local filesystem. + </description> + </property> + <property> + <name>oozie.service.ActionService.executor.ext.classes</name> + <value> + org.apache.oozie.action.email.EmailActionExecutor, + org.apache.oozie.action.hadoop.HiveActionExecutor, + org.apache.oozie.action.hadoop.ShellActionExecutor, + org.apache.oozie.action.hadoop.SqoopActionExecutor, + org.apache.oozie.action.hadoop.DistcpActionExecutor + </value> + <description> + List of ActionExecutors extension classes (separated by commas). Only action types with associated executors can + be used in workflows. This property is a convenience property to add extensions to the built in executors without + having to include all the built in ones. + </description> + </property> + + <property> + <name>oozie.service.SchemaService.wf.ext.schemas</name> + <value>shell-action-0.1.xsd,email-action-0.1.xsd,hive-action-0.2.xsd,sqoop-action-0.2.xsd,ssh-action-0.1.xsd,distcp-action-0.1.xsd,shell-action-0.2.xsd,oozie-sla-0.1.xsd,oozie-sla-0.2.xsd,hive-action-0.3.xsd</value> + <description> + Schemas for additional actions types. IMPORTANT: if there are no schemas leave a 1 space string, the service + trims the value, if empty Configuration assumes it is NULL. + </description> + </property> + <property> + <name>oozie.service.JPAService.create.db.schema</name> + <value>false</value> + <description> + Creates Oozie DB. + + If set to true, it creates the DB schema if it does not exist. If the DB schema exists is a NOP. + If set to false, it does not create the DB schema. If the DB schema does not exist it fails start up. + </description> + </property> + + <property> + <name>oozie.service.JPAService.jdbc.driver</name> + <value>org.apache.derby.jdbc.EmbeddedDriver</value> + <description> + JDBC driver class. + </description> + </property> + + <property> + <name>oozie.service.JPAService.jdbc.url</name> + <value>jdbc:derby:${oozie.data.dir}/${oozie.db.schema.name}-db;create=true</value> + <description> + JDBC URL. + </description> + </property> + + <property> + <name>oozie.service.JPAService.jdbc.username</name> + <value>oozie</value> + <description> + Database user name to use to connect to the database + </description> + </property> + + <property require-input = "true"> + <name>oozie.service.JPAService.jdbc.password</name> + <value> </value> + <property-type>PASSWORD</property-type> + <description> + DB user password. + + IMPORTANT: if password is emtpy leave a 1 space string, the service trims the value, + if empty Configuration assumes it is NULL. + </description> + </property> + + <property> + <name>oozie.service.JPAService.pool.max.active.conn</name> + <value>10</value> + <description> + Max number of connections. + </description> + </property> + + <property> + <name>oozie.services</name> + <value> + org.apache.oozie.service.SchedulerService, + org.apache.oozie.service.InstrumentationService, + org.apache.oozie.service.CallableQueueService, + org.apache.oozie.service.UUIDService, + org.apache.oozie.service.ELService, + org.apache.oozie.service.AuthorizationService, + org.apache.oozie.service.UserGroupInformationService, + org.apache.oozie.service.HadoopAccessorService, + org.apache.oozie.service.URIHandlerService, + org.apache.oozie.service.MemoryLocksService, + org.apache.oozie.service.DagXLogInfoService, + org.apache.oozie.service.SchemaService, + org.apache.oozie.service.LiteWorkflowAppService, + org.apache.oozie.service.JPAService, + org.apache.oozie.service.StoreService, + org.apache.oozie.service.CoordinatorStoreService, + org.apache.oozie.service.SLAStoreService, + org.apache.oozie.service.DBLiteWorkflowStoreService, + org.apache.oozie.service.CallbackService, + org.apache.oozie.service.ActionService, + org.apache.oozie.service.ActionCheckerService, + org.apache.oozie.service.RecoveryService, + org.apache.oozie.service.PurgeService, + org.apache.oozie.service.CoordinatorEngineService, + org.apache.oozie.service.BundleEngineService, + org.apache.oozie.service.DagEngineService, + org.apache.oozie.service.CoordMaterializeTriggerService, + org.apache.oozie.service.StatusTransitService, + org.apache.oozie.service.PauseTransitService, + org.apache.oozie.service.GroupsService, + org.apache.oozie.service.ProxyUserService + </value> + <description>List of Oozie services</description> + </property> + <property> + <name>oozie.service.URIHandlerService.uri.handlers</name> + <value>org.apache.oozie.dependency.FSURIHandler,org.apache.oozie.dependency.HCatURIHandler</value> + <description> + Enlist the different uri handlers supported for data availability checks. + </description> + </property> + <property> + <name>oozie.services.ext</name> + <value>org.apache.oozie.service.PartitionDependencyManagerService,org.apache.oozie.service.HCatAccessorService + </value> + <description> + To add/replace services defined in 'oozie.services' with custom implementations. + Class names must be separated by commas. + </description> + </property> + <property> + <name>oozie.service.coord.push.check.requeue.interval</name> + <value>30000</value> + <description> + Command re-queue interval for push dependencies (in millisecond). + </description> + </property> + <property> + <name>oozie.credentials.credentialclasses</name> + <value>hcat=org.apache.oozie.action.hadoop.HCatCredentials</value> + <description> + Credential Class to be used for HCat. + </description> + </property> + +</configuration> http://git-wip-us.apache.org/repos/asf/ambari/blob/e7d07030/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/metainfo.xml ---------------------------------------------------------------------- diff --git a/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/metainfo.xml b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/metainfo.xml new file mode 100644 index 0000000..7239383 --- /dev/null +++ b/ambari-server/src/main/resources/stacks/PHD/3.0.0.0/services/OOZIE/metainfo.xml @@ -0,0 +1,153 @@ +<?xml version="1.0"?> +<!-- + Licensed to the Apache Software Foundation (ASF) under one or more + contributor license agreements. See the NOTICE file distributed with + this work for additional information regarding copyright ownership. + The ASF licenses this file to You under the Apache License, Version 2.0 + (the "License"); you may not use this file except in compliance with + the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +--> +<metainfo> + <schemaVersion>2.0</schemaVersion> + <services> + <service> + <name>OOZIE</name> + <displayName>Oozie</displayName> + <comment>System for workflow coordination and execution of Apache Hadoop jobs. This also includes the installation of the optional Oozie Web Console which relies on and will install the <a target="_blank" href="http://www.sencha.com/legal/open-source-faq/">ExtJS</a> Library. + </comment> + <version>4.0.1.phd.3.0.0.0</version> + <components> + <component> + <name>OOZIE_SERVER</name> + <displayName>Oozie Server</displayName> + <category>MASTER</category> + <cardinality>1</cardinality> + <dependencies> + <dependency> + <name>HDFS/HDFS_CLIENT</name> + <scope>host</scope> + <auto-deploy> + <enabled>true</enabled> + </auto-deploy> + </dependency> + <dependency> + <name>MAPREDUCE2/MAPREDUCE2_CLIENT</name> + <scope>host</scope> + <auto-deploy> + <enabled>true</enabled> + </auto-deploy> + </dependency> + <dependency> + <name>YARN/YARN_CLIENT</name> + <scope>host</scope> + <auto-deploy> + <enabled>true</enabled> + </auto-deploy> + </dependency> + </dependencies> + <commandScript> + <script>scripts/oozie_server.py</script> + <scriptType>PYTHON</scriptType> + <timeout>600</timeout> + </commandScript> + </component> + + <component> + <name>OOZIE_CLIENT</name> + <displayName>Oozie Client</displayName> + <category>CLIENT</category> + <cardinality>1+</cardinality> + <dependencies> + <dependency> + <name>HDFS/HDFS_CLIENT</name> + <scope>host</scope> + <auto-deploy> + <enabled>true</enabled> + </auto-deploy> + </dependency> + <dependency> + <name>MAPREDUCE2/MAPREDUCE2_CLIENT</name> + <scope>host</scope> + <auto-deploy> + <enabled>true</enabled> + </auto-deploy> + </dependency> + </dependencies> + <commandScript> + <script>scripts/oozie_client.py</script> + <scriptType>PYTHON</scriptType> + </commandScript> + <configFiles> + <configFile> + <type>xml</type> + <fileName>oozie-site.xml</fileName> + <dictionaryName>oozie-site</dictionaryName> + </configFile> + <configFile> + <type>env</type> + <fileName>oozie-env.sh</fileName> + <dictionaryName>oozie-env</dictionaryName> + </configFile> + <configFile> + <type>env</type> + <fileName>oozie-log4j.properties</fileName> + <dictionaryName>oozie-log4j</dictionaryName> + </configFile> + </configFiles> + </component> + </components> + + <osSpecifics> + <osSpecific> + <osFamily>any</osFamily> + <packages> + <package> + <name>oozie</name> + </package> + <package> + <name>oozie-client</name> + </package> + <package> + <name>mysql-connector-java</name> + </package> + </packages> + </osSpecific> + + <osSpecific> + <osFamily>ubuntu12</osFamily> + <packages> + <package> + <name>libxml2-utils</name> + </package> + </packages> + </osSpecific> + + </osSpecifics> + + <commandScript> + <script>scripts/service_check.py</script> + <scriptType>PYTHON</scriptType> + <timeout>300</timeout> + </commandScript> + + <requiredServices> + <service>YARN</service> + </requiredServices> + + <configuration-dependencies> + <config-type>oozie-site</config-type> + <config-type>oozie-env</config-type> + <config-type>oozie-log4j</config-type> + <config-type>yarn-site</config-type> + </configuration-dependencies> + </service> + </services> +</metainfo>
