This is an automated email from the ASF dual-hosted git repository.
squakez pushed a commit to branch main
in repository https://gitbox.apache.org/repos/asf/camel-k.git
The following commit(s) were added to refs/heads/main by this push:
new 9257fa38e fix(ci): trait regen
9257fa38e is described below
commit 9257fa38efe0b9add5fa8f9a56b468350c4539ce
Author: Pasquale Congiusti <[email protected]>
AuthorDate: Tue May 12 16:41:00 2026 +0200
fix(ci): trait regen
---
cmd/util/doc-gen/generators/traitdocgen.go | 3 +-
docs/modules/traits/pages/affinity.adoc | 17 +---------
docs/modules/traits/pages/builder.adoc | 17 +---------
docs/modules/traits/pages/camel.adoc | 16 +--------
docs/modules/traits/pages/container.adoc | 16 +--------
docs/modules/traits/pages/cron.adoc | 16 +--------
docs/modules/traits/pages/deployer.adoc | 16 +--------
docs/modules/traits/pages/deployment.adoc | 16 +--------
docs/modules/traits/pages/environment.adoc | 16 +--------
docs/modules/traits/pages/gateway.adoc | 16 +--------
docs/modules/traits/pages/gitops.adoc | 16 +--------
docs/modules/traits/pages/health.adoc | 16 +--------
docs/modules/traits/pages/ingress.adoc | 16 +--------
docs/modules/traits/pages/init-containers.adoc | 17 +---------
docs/modules/traits/pages/istio.adoc | 16 +--------
docs/modules/traits/pages/jolokia.adoc | 16 +--------
docs/modules/traits/pages/jvm.adoc | 17 +---------
docs/modules/traits/pages/kamelets.adoc | 16 +--------
docs/modules/traits/pages/keda.adoc | 16 +--------
docs/modules/traits/pages/knative-service.adoc | 16 +--------
docs/modules/traits/pages/knative.adoc | 16 +--------
docs/modules/traits/pages/logging.adoc | 17 +---------
docs/modules/traits/pages/master.adoc | 17 +---------
docs/modules/traits/pages/mount.adoc | 17 +---------
docs/modules/traits/pages/openapi.adoc | 43 -------------------------
docs/modules/traits/pages/owner.adoc | 16 +--------
docs/modules/traits/pages/pdb.adoc | 16 +--------
docs/modules/traits/pages/pod.adoc | 17 +---------
docs/modules/traits/pages/prometheus.adoc | 16 +--------
docs/modules/traits/pages/pull-secret.adoc | 16 +--------
docs/modules/traits/pages/quarkus.adoc | 16 +--------
docs/modules/traits/pages/route.adoc | 17 +---------
docs/modules/traits/pages/security-context.adoc | 16 +--------
docs/modules/traits/pages/service.adoc | 17 +---------
docs/modules/traits/pages/telemetry.adoc | 25 +++-----------
docs/modules/traits/pages/toleration.adoc | 17 +---------
helm/camel-k/templates/rbacs-common.yaml | 1 +
pkg/resources/config/rbac/builder-role.yaml | 2 ++
38 files changed, 43 insertions(+), 570 deletions(-)
diff --git a/cmd/util/doc-gen/generators/traitdocgen.go
b/cmd/util/doc-gen/generators/traitdocgen.go
index 846cf2588..f15436bb0 100644
--- a/cmd/util/doc-gen/generators/traitdocgen.go
+++ b/cmd/util/doc-gen/generators/traitdocgen.go
@@ -229,10 +229,11 @@ func writeFields(t *types.Type, traitID string, content
*[]string) {
res = append(res, "[cols=\"2m,1m,5a\"]", "|===")
res = append(res, "|Property | Type | Description", "")
writeMembers(t, traitID, &res)
- res = append(res, "|===", "", adocConfigurationMarkerEnd)
+ res = append(res, "|===")
res = append(res, "")
res = append(res, "NOTE: the variable names are \"snake case\" if
you're using in `kamel` CLI, for example `trait.myParam` has to be translated
as `-t trait.my-param`")
res = append(res, "")
+ res = append(res, "", adocConfigurationMarkerEnd)
res = append(res, post...)
*content = res
}
diff --git a/docs/modules/traits/pages/affinity.adoc
b/docs/modules/traits/pages/affinity.adoc
index 8e66034a0..c32543468 100755
--- a/docs/modules/traits/pages/affinity.adoc
+++ b/docs/modules/traits/pages/affinity.adoc
@@ -54,25 +54,10 @@ integration pod(s) should not be co-located with.
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
+// End of autogenerated code - DO NOT EDIT! (configuration)
== Examples
diff --git a/docs/modules/traits/pages/builder.adoc
b/docs/modules/traits/pages/builder.adoc
index ffc185d18..ae4f23471 100755
--- a/docs/modules/traits/pages/builder.adoc
+++ b/docs/modules/traits/pages/builder.adoc
@@ -128,25 +128,10 @@ if you need to execute them. Useful only with `pod`
strategy.
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
+// End of autogenerated code - DO NOT EDIT! (configuration)
== Node Selectors
diff --git a/docs/modules/traits/pages/camel.adoc
b/docs/modules/traits/pages/camel.adoc
index 17aaff208..1f82067aa 100755
--- a/docs/modules/traits/pages/camel.adoc
+++ b/docs/modules/traits/pages/camel.adoc
@@ -45,21 +45,7 @@ to the best matching Catalog existing on the cluster
(Default, the one provided
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/container.adoc
b/docs/modules/traits/pages/container.adoc
index 6758062ba..ed2ba4847 100755
--- a/docs/modules/traits/pages/container.adoc
+++ b/docs/modules/traits/pages/container.adoc
@@ -119,21 +119,7 @@ Integration `.spec.integrationKit` parameter. If you're
moving the Integration a
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/cron.adoc
b/docs/modules/traits/pages/cron.adoc
index a3bd0fc2e..1153c04f9 100755
--- a/docs/modules/traits/pages/cron.adoc
+++ b/docs/modules/traits/pages/cron.adoc
@@ -97,21 +97,7 @@ It defaults to 2.
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/deployer.adoc
b/docs/modules/traits/pages/deployer.adoc
index 40f41e625..47a9c2287 100644
--- a/docs/modules/traits/pages/deployer.adoc
+++ b/docs/modules/traits/pages/deployer.adoc
@@ -43,21 +43,7 @@ Deprecated: this feature will be removed in future releases.
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/deployment.adoc
b/docs/modules/traits/pages/deployment.adoc
index 9c716fca0..e0565cb20 100644
--- a/docs/modules/traits/pages/deployment.adoc
+++ b/docs/modules/traits/pages/deployment.adoc
@@ -58,21 +58,7 @@ Defaults to `25%`.
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/environment.adoc
b/docs/modules/traits/pages/environment.adoc
index d6b55b384..52e1dbdd9 100755
--- a/docs/modules/traits/pages/environment.adoc
+++ b/docs/modules/traits/pages/environment.adoc
@@ -47,21 +47,7 @@ These take precedence over any previously defined
environment variables.
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/gateway.adoc
b/docs/modules/traits/pages/gateway.adoc
index a3c34d79a..61e66cc8b 100644
--- a/docs/modules/traits/pages/gateway.adoc
+++ b/docs/modules/traits/pages/gateway.adoc
@@ -41,21 +41,7 @@ The following configuration options are available:
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/gitops.adoc
b/docs/modules/traits/pages/gitops.adoc
index 0fd046978..2f46a5ba5 100644
--- a/docs/modules/traits/pages/gitops.adoc
+++ b/docs/modules/traits/pages/gitops.adoc
@@ -75,21 +75,7 @@ The following configuration options are available:
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/health.adoc
b/docs/modules/traits/pages/health.adoc
index 3243669b7..ff5558b09 100755
--- a/docs/modules/traits/pages/health.adoc
+++ b/docs/modules/traits/pages/health.adoc
@@ -139,21 +139,7 @@ The following configuration options are available:
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/ingress.adoc
b/docs/modules/traits/pages/ingress.adoc
index 1a64fabf0..86ffa8e10 100755
--- a/docs/modules/traits/pages/ingress.adoc
+++ b/docs/modules/traits/pages/ingress.adoc
@@ -74,21 +74,7 @@ One of `Exact`, `Prefix`, `ImplementationSpecific` (default
to `Prefix`).
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/init-containers.adoc
b/docs/modules/traits/pages/init-containers.adoc
index bb9d82e18..e825bce93 100644
--- a/docs/modules/traits/pages/init-containers.adoc
+++ b/docs/modules/traits/pages/init-containers.adoc
@@ -37,25 +37,10 @@ The following configuration options are available:
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
+// End of autogenerated code - DO NOT EDIT! (configuration)
== An example init container
diff --git a/docs/modules/traits/pages/istio.adoc
b/docs/modules/traits/pages/istio.adoc
index f7f3ba50e..378e97e1d 100755
--- a/docs/modules/traits/pages/istio.adoc
+++ b/docs/modules/traits/pages/istio.adoc
@@ -38,21 +38,7 @@ The following configuration options are available:
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/jolokia.adoc
b/docs/modules/traits/pages/jolokia.adoc
index 956e357b0..11a50594c 100755
--- a/docs/modules/traits/pages/jolokia.adoc
+++ b/docs/modules/traits/pages/jolokia.adoc
@@ -90,21 +90,7 @@ in
https://jolokia.org/reference/html/agents.html#agent-jvm-config[JVM agent con
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/jvm.adoc
b/docs/modules/traits/pages/jvm.adoc
index f592dcaa8..13fde3b0d 100755
--- a/docs/modules/traits/pages/jvm.adoc
+++ b/docs/modules/traits/pages/jvm.adoc
@@ -89,25 +89,10 @@ Deprecated: no longer in use.
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
+// End of autogenerated code - DO NOT EDIT! (configuration)
== Usage of jar parameters
diff --git a/docs/modules/traits/pages/kamelets.adoc
b/docs/modules/traits/pages/kamelets.adoc
index 0dbb987c9..3883c6b99 100755
--- a/docs/modules/traits/pages/kamelets.adoc
+++ b/docs/modules/traits/pages/kamelets.adoc
@@ -41,21 +41,7 @@ The following configuration options are available:
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/keda.adoc
b/docs/modules/traits/pages/keda.adoc
index 0356b2791..5f01467ce 100644
--- a/docs/modules/traits/pages/keda.adoc
+++ b/docs/modules/traits/pages/keda.adoc
@@ -64,21 +64,7 @@ values are maps of metadata key-value pairs to merge (e.g.,
{"lagThreshold": "10
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/knative-service.adoc
b/docs/modules/traits/pages/knative-service.adoc
index 4dc0e34b1..1cab0d1c6 100755
--- a/docs/modules/traits/pages/knative-service.adoc
+++ b/docs/modules/traits/pages/knative-service.adoc
@@ -98,21 +98,7 @@ Refer to the Knative documentation for more information.
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/knative.adoc
b/docs/modules/traits/pages/knative.adoc
index fe5ba2157..b9b6e8e32 100755
--- a/docs/modules/traits/pages/knative.adoc
+++ b/docs/modules/traits/pages/knative.adoc
@@ -101,21 +101,7 @@ If this is true, the created Knative trigger uses the
event type as a filter on
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/logging.adoc
b/docs/modules/traits/pages/logging.adoc
index 4ffa29719..b184472e4 100755
--- a/docs/modules/traits/pages/logging.adoc
+++ b/docs/modules/traits/pages/logging.adoc
@@ -68,25 +68,10 @@ The following configuration options are available:
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
+// End of autogenerated code - DO NOT EDIT! (configuration)
[[migration-guide]]
== Migration Guide
diff --git a/docs/modules/traits/pages/master.adoc
b/docs/modules/traits/pages/master.adoc
index a4abbe4f9..b04a43d4b 100755
--- a/docs/modules/traits/pages/master.adoc
+++ b/docs/modules/traits/pages/master.adoc
@@ -73,25 +73,10 @@ Name of the configmap/lease resource that will be used to
store the lock. Defaul
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
+// End of autogenerated code - DO NOT EDIT! (configuration)
== Migration Guide
diff --git a/docs/modules/traits/pages/mount.adoc
b/docs/modules/traits/pages/mount.adoc
index de0091f83..ad693f56e 100644
--- a/docs/modules/traits/pages/mount.adoc
+++ b/docs/modules/traits/pages/mount.adoc
@@ -66,25 +66,10 @@ changes in metadata.
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
+// End of autogenerated code - DO NOT EDIT! (configuration)
== Dynamic creation of PersistentVolumeClaims
diff --git a/docs/modules/traits/pages/openapi.adoc
b/docs/modules/traits/pages/openapi.adoc
deleted file mode 100755
index 1a06aed4a..000000000
--- a/docs/modules/traits/pages/openapi.adoc
+++ /dev/null
@@ -1,43 +0,0 @@
-= Openapi Trait
-
-// Start of autogenerated code - DO NOT EDIT! (badges)
-[.badges]
-[.badge-key]##Deprecated since##[.badge-unsupported]##2.5.0##
-// End of autogenerated code - DO NOT EDIT! (badges)
-// Start of autogenerated code - DO NOT EDIT! (description)
-The OpenAPI DSL trait is internally used to allow creating integrations from a
OpenAPI specs.
-
-WARNING: The Openapi trait is **deprecated** and will removed in future
release versions:
-use Camel REST contract first instead (see Camel core documentation).
-
-
-This trait is available in the following profiles: **Kubernetes, Knative,
OpenShift**.
-
-NOTE: The openapi trait is a *platform trait* and cannot be disabled by the
user.
-
-// End of autogenerated code - DO NOT EDIT! (description)
-// Start of autogenerated code - DO NOT EDIT! (configuration)
-== Configuration
-
-Trait properties can be specified when running any integration with the CLI:
-[source,console]
-----
-$ kamel run --trait openapi.[key]=[value] --trait openapi.[key2]=[value2]
integration.yaml
-----
-The following configuration options are available:
-
-[cols="2m,1m,5a"]
-|===
-|Property | Type | Description
-
-| openapi.enabled
-| bool
-| Deprecated: no longer in use.
-
-| openapi.configmaps
-| []string
-| The configmaps holding the spec of the OpenAPI (compatible with > 3.0 spec
only).
-
-|===
-
-// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/owner.adoc
b/docs/modules/traits/pages/owner.adoc
index a5451a762..01cc735f3 100755
--- a/docs/modules/traits/pages/owner.adoc
+++ b/docs/modules/traits/pages/owner.adoc
@@ -40,21 +40,7 @@ The following configuration options are available:
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/pdb.adoc
b/docs/modules/traits/pages/pdb.adoc
index 504667ecc..73c6f18a0 100755
--- a/docs/modules/traits/pages/pdb.adoc
+++ b/docs/modules/traits/pages/pdb.adoc
@@ -41,21 +41,7 @@ Only one of `max-unavailable` and `min-available` can be
specified.
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/pod.adoc
b/docs/modules/traits/pages/pod.adoc
index 0ee47a3a4..3d5c5d391 100755
--- a/docs/modules/traits/pages/pod.adoc
+++ b/docs/modules/traits/pages/pod.adoc
@@ -51,25 +51,10 @@ The following configuration options are available:
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
+// End of autogenerated code - DO NOT EDIT! (configuration)
== Sidecar containers
diff --git a/docs/modules/traits/pages/prometheus.adoc
b/docs/modules/traits/pages/prometheus.adoc
index 4418e59e2..b3fbc66e3 100755
--- a/docs/modules/traits/pages/prometheus.adoc
+++ b/docs/modules/traits/pages/prometheus.adoc
@@ -48,24 +48,10 @@ The following configuration options are available:
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
== Examples
diff --git a/docs/modules/traits/pages/pull-secret.adoc
b/docs/modules/traits/pages/pull-secret.adoc
index bd7f10738..9790dbb39 100755
--- a/docs/modules/traits/pages/pull-secret.adoc
+++ b/docs/modules/traits/pages/pull-secret.adoc
@@ -50,21 +50,7 @@ Deprecated: may be removed in future releases.
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/quarkus.adoc
b/docs/modules/traits/pages/quarkus.adoc
index 9341958d3..09a13a653 100755
--- a/docs/modules/traits/pages/quarkus.adoc
+++ b/docs/modules/traits/pages/quarkus.adoc
@@ -62,21 +62,7 @@ with the `native` kit having precedence over the `jvm` one
once ready.
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/route.adoc
b/docs/modules/traits/pages/route.adoc
index dddf173b8..758833a1c 100755
--- a/docs/modules/traits/pages/route.adoc
+++ b/docs/modules/traits/pages/route.adoc
@@ -116,25 +116,10 @@ Refer to the OpenShift route documentation for additional
information.
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
+// End of autogenerated code - DO NOT EDIT! (configuration)
== Examples
diff --git a/docs/modules/traits/pages/security-context.adoc
b/docs/modules/traits/pages/security-context.adoc
index 058b602ba..f24436897 100644
--- a/docs/modules/traits/pages/security-context.adoc
+++ b/docs/modules/traits/pages/security-context.adoc
@@ -43,21 +43,7 @@ The following configuration options are available:
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
+// End of autogenerated code - DO NOT EDIT! (configuration)
diff --git a/docs/modules/traits/pages/service.adoc
b/docs/modules/traits/pages/service.adoc
index 9fd262e33..0bdc83e48 100755
--- a/docs/modules/traits/pages/service.adoc
+++ b/docs/modules/traits/pages/service.adoc
@@ -64,25 +64,10 @@ Don't use in Knative based environments.
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
+// End of autogenerated code - DO NOT EDIT! (configuration)
== Examples
diff --git a/docs/modules/traits/pages/telemetry.adoc
b/docs/modules/traits/pages/telemetry.adoc
index 104826fe6..f7feae05c 100644
--- a/docs/modules/traits/pages/telemetry.adoc
+++ b/docs/modules/traits/pages/telemetry.adoc
@@ -77,44 +77,29 @@ The following configuration options are available:
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
+// End of autogenerated code - DO NOT EDIT! (configuration)
== Examples
-* To activate tracing to a deployed OTLP API Jaeger through discovery:
+* To activate tracing to a deployed OTLP API Jaeger through discovery:
+
[source,console]
$ kamel run -t telemetry.enable=true ...
-* To define a specific deployed OTLP gRPC reciever:
+* To define a specific deployed OTLP gRPC reciever:
+
[source,console]
$ kamel run -t telemetry.enable=true -t
telemetry.endpoint=http://instance-collector:4317 ...
-* To define another sampler service name:
+* To define another sampler service name:
+
[source,console]
$ kamel run -t telemetry.enable=true -t
telemetry.service-name=tracer_myintegration ...
-* To use a ratio sampler with a sampling ratio of 1 to every 1,000 :
+* To use a ratio sampler with a sampling ratio of 1 to every 1,000 :
+
[source,console]
$ kamel run -t telemetry.enable=true -t telemetry.sampler=ratio -t
telemetry.sampler-ratio=0.001 ...
diff --git a/docs/modules/traits/pages/toleration.adoc
b/docs/modules/traits/pages/toleration.adoc
index 83084f650..b6f1eb38f 100755
--- a/docs/modules/traits/pages/toleration.adoc
+++ b/docs/modules/traits/pages/toleration.adoc
@@ -44,25 +44,10 @@ The following configuration options are available:
|===
-// End of autogenerated code - DO NOT EDIT! (configuration)
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variable names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
-
-NOTE: the variables names are "snake case" if you're using in `kamel` CLI, for
example `trait.myParam` has to be translated as `-t trait.my-param`
-
+// End of autogenerated code - DO NOT EDIT! (configuration)
== Examples
diff --git a/helm/camel-k/templates/rbacs-common.yaml
b/helm/camel-k/templates/rbacs-common.yaml
index d433d5e84..e4a784657 100644
--- a/helm/camel-k/templates/rbacs-common.yaml
+++ b/helm/camel-k/templates/rbacs-common.yaml
@@ -49,6 +49,7 @@ rules:
- watch
- apiGroups:
- ""
+ - events.k8s.io
resources:
- events
verbs:
diff --git a/pkg/resources/config/rbac/builder-role.yaml
b/pkg/resources/config/rbac/builder-role.yaml
index e3642eb9c..301714e59 100644
--- a/pkg/resources/config/rbac/builder-role.yaml
+++ b/pkg/resources/config/rbac/builder-role.yaml
@@ -49,7 +49,9 @@ rules:
- list
- watch
- apiGroups:
+ # Deprecated: this legacy group is replaced by events.k8s.io from version
2.10.0 onward
- ""
+ - "events.k8s.io"
resources:
- events
verbs:
