http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/site/markdown/tutorial_rebalance.md ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/site/markdown/tutorial_rebalance.md b/website/0.6.6/src/site/markdown/tutorial_rebalance.md new file mode 100644 index 0000000..2e1a79b --- /dev/null +++ b/website/0.6.6/src/site/markdown/tutorial_rebalance.md @@ -0,0 +1,181 @@ +<!--- +Licensed to the Apache Software Foundation (ASF) under one +or more contributor license agreements. See the NOTICE file +distributed with this work for additional information +regarding copyright ownership. The ASF licenses this file +to you under the Apache License, Version 2.0 (the +"License"); you may not use this file except in compliance +with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, +software distributed under the License is distributed on an +"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied. See the License for the +specific language governing permissions and limitations +under the License. +--> + +<head> + <title>Tutorial - Rebalancing Algorithms</title> +</head> + +## [Helix Tutorial](./Tutorial.html): Rebalancing Algorithms + +The placement of partitions in a distributed system is essential for the reliability and scalability of the system. For example, when a node fails, it is important that the partitions hosted on that node are reallocated evenly among the remaining nodes. Consistent hashing is one such algorithm that can satisfy this guarantee. Helix provides a variant of consistent hashing based on the RUSH algorithm, among others. + +This means given a number of partitions, replicas and number of nodes, Helix does the automatic assignment of partition to nodes such that: + +* Each node has the same number of partitions +* Replicas of the same partition do not stay on the same node +* When a node fails, the partitions will be equally distributed among the remaining nodes +* When new nodes are added, the number of partitions moved will be minimized along with satisfying the above criteria + +Helix employs a rebalancing algorithm to compute the _ideal state_ of the system. When the _current state_ differs from the _ideal state_, Helix uses it as the target state of the system and computes the appropriate transitions needed to bring it to the _ideal state_. + +Helix makes it easy to perform this operation, while giving you control over the algorithm. In this section, we\'ll see how to implement the desired behavior. + +Helix has four options for rebalancing, in increasing order of customization by the system builder: + +* FULL_AUTO +* SEMI_AUTO +* CUSTOMIZED +* USER_DEFINED + +``` + |FULL_AUTO | SEMI_AUTO | CUSTOMIZED| USER_DEFINED | + ---------------------------------------------------------| + LOCATION | HELIX | APP | APP | APP | + ---------------------------------------------------------| + STATE | HELIX | HELIX | APP | APP | + ---------------------------------------------------------- +``` + + +### FULL_AUTO + +When the rebalance mode is set to FULL_AUTO, Helix controls both the location of the replica along with the state. This option is useful for applications where creation of a replica is not expensive. + +For example, consider this system that uses a MasterSlave state model, with 3 partitions and 2 replicas in the ideal state. + +``` +{ + "id" : "MyResource", + "simpleFields" : { + "REBALANCE_MODE" : "FULL_AUTO", + "NUM_PARTITIONS" : "3", + "REPLICAS" : "2", + "STATE_MODEL_DEF_REF" : "MasterSlave", + } + "listFields" : { + "MyResource_0" : [], + "MyResource_1" : [], + "MyResource_2" : [] + }, + "mapFields" : { + } +} +``` + +If there are 3 nodes in the cluster, then Helix will balance the masters and slaves equally. The ideal state is therefore: + +``` +{ + "id" : "MyResource", + "simpleFields" : { + "NUM_PARTITIONS" : "3", + "REPLICAS" : "2", + "STATE_MODEL_DEF_REF" : "MasterSlave", + }, + "mapFields" : { + "MyResource_0" : { + "N1" : "MASTER", + "N2" : "SLAVE", + }, + "MyResource_1" : { + "N2" : "MASTER", + "N3" : "SLAVE", + }, + "MyResource_2" : { + "N3" : "MASTER", + "N1" : "SLAVE", + } + } +} +``` + +Another typical example is evenly distributing a group of tasks among the currently healthy processes. For example, if there are 60 tasks and 4 nodes, Helix assigns 15 tasks to each node. +When one node fails, Helix redistributes its 15 tasks to the remaining 3 nodes, resulting in a balanced 20 tasks per node. Similarly, if a node is added, Helix re-allocates 3 tasks from each of the 4 nodes to the 5th node, resulting in a balanced distribution of 12 tasks per node.. + +### SEMI_AUTO + +When the application needs to control the placement of the replicas, use the SEMI_AUTO rebalance mode. + +Example: In the ideal state below, the partition \'MyResource_0\' is constrained to be placed only on node1 or node2. The choice of _state_ is still controlled by Helix. That means MyResource_0.MASTER could be on node1 and MyResource_0.SLAVE on node2, or vice-versa but neither would be placed on node3. + +``` +{ + "id" : "MyResource", + "simpleFields" : { + "REBALANCE_MODE" : "SEMI_AUTO", + "NUM_PARTITIONS" : "3", + "REPLICAS" : "2", + "STATE_MODEL_DEF_REF" : "MasterSlave", + } + "listFields" : { + "MyResource_0" : [node1, node2], + "MyResource_1" : [node2, node3], + "MyResource_2" : [node3, node1] + }, + "mapFields" : { + } +} +``` + +The MasterSlave state model requires that a partition has exactly one MASTER at all times, and the other replicas should be SLAVEs. In this simple example with 2 replicas per partition, there would be one MASTER and one SLAVE. Upon failover, a SLAVE has to assume mastership, and a new SLAVE will be generated. + +In this mode when node1 fails, unlike in FULL_AUTO mode the partition is _not_ moved from node1 to node3. Instead, Helix will decide to change the state of MyResource_0 on node2 from SLAVE to MASTER, based on the system constraints. + +### CUSTOMIZED + +Helix offers a third mode called CUSTOMIZED, in which the application controls the placement _and_ state of each replica. The application needs to implement a callback interface that Helix invokes when the cluster state changes. +Within this callback, the application can recompute the idealstate. Helix will then issue appropriate transitions such that _Idealstate_ and _Currentstate_ converges. + +Here\'s an example, again with 3 partitions, 2 replicas per partition, and the MasterSlave state model: + +``` +{ + "id" : "MyResource", + "simpleFields" : { + "REBALANCE_MODE" : "CUSTOMIZED", + "NUM_PARTITIONS" : "3", + "REPLICAS" : "2", + "STATE_MODEL_DEF_REF" : "MasterSlave", + }, + "mapFields" : { + "MyResource_0" : { + "N1" : "MASTER", + "N2" : "SLAVE", + }, + "MyResource_1" : { + "N2" : "MASTER", + "N3" : "SLAVE", + }, + "MyResource_2" : { + "N3" : "MASTER", + "N1" : "SLAVE", + } + } +} +``` + +Suppose the current state of the system is 'MyResource_0' \-\> {N1:MASTER, N2:SLAVE} and the application changes the ideal state to 'MyResource_0' \-\> {N1:SLAVE,N2:MASTER}. While the application decides which node is MASTER and which is SLAVE, Helix will not blindly issue MASTER\-\-\>SLAVE to N1 and SLAVE\-\-\>MASTER to N2 in parallel, since that might result in a transient state where both N1 and N2 are masters, which violates the MasterSlave constraint that there is exactly one MASTER at a time. Helix will first issue MASTER\-\-\>SLAVE to N1 and after it is completed, it will issue SLAVE\-\-\>MASTER to N2. + +### USER_DEFINED + +For maximum flexibility, Helix exposes an interface that can allow applications to plug in custom rebalancing logic. By providing the name of a class that implements the Rebalancer interface, Helix will automatically call the contained method whenever there is a change to the live participants in the cluster. For more, see [User-Defined Rebalancer](./tutorial_user_def_rebalancer.html). + +### Backwards Compatibility + +In previous versions, FULL_AUTO was called AUTO_REBALANCE and SEMI_AUTO was called AUTO. Furthermore, they were presented as the IDEAL_STATE_MODE. Helix supports both IDEAL_STATE_MODE and REBALANCE_MODE, but IDEAL_STATE_MODE is now deprecated and may be phased out in future versions.
http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/site/markdown/tutorial_spectator.md ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/site/markdown/tutorial_spectator.md b/website/0.6.6/src/site/markdown/tutorial_spectator.md new file mode 100644 index 0000000..e43cd6b --- /dev/null +++ b/website/0.6.6/src/site/markdown/tutorial_spectator.md @@ -0,0 +1,75 @@ +<!--- +Licensed to the Apache Software Foundation (ASF) under one +or more contributor license agreements. See the NOTICE file +distributed with this work for additional information +regarding copyright ownership. The ASF licenses this file +to you under the Apache License, Version 2.0 (the +"License"); you may not use this file except in compliance +with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, +software distributed under the License is distributed on an +"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied. See the License for the +specific language governing permissions and limitations +under the License. +--> + +<head> + <title>Tutorial - Spectator</title> +</head> + +## [Helix Tutorial](./Tutorial.html): Spectator + +Next, we\'ll learn how to implement a __spectator__. Typically, a spectator needs to react to changes within the distributed system. Examples: a client that needs to know where to send a request, a topic consumer in a consumer group. The spectator is automatically informed of changes in the _external state_ of the cluster, but it does not have to add any code to keep track of other components in the system. + +### Start a Connection + +Same as for a participant, The Helix manager is the common component that connects each system component with the cluster. + +It requires the following parameters: + +* clusterName: A logical name to represent the group of nodes +* instanceName: A logical name of the process creating the manager instance. Generally this is host:port +* instanceType: Type of the process. This can be one of the following types, in this case, use SPECTATOR: + * CONTROLLER: Process that controls the cluster, any number of controllers can be started but only one will be active at any given time + * PARTICIPANT: Process that performs the actual task in the distributed system + * SPECTATOR: Process that observes the changes in the cluster + * ADMIN: To carry out system admin actions +* zkConnectString: Connection string to ZooKeeper. This is of the form host1:port1,host2:port2,host3:port3 + +After the Helix manager instance is created, the only thing that needs to be registered is the listener. When the ExternalView changes, the listener is notified. + +A spectator observes the cluster and is notified when the state of the system changes. Helix consolidates the state of entire cluster in one Znode called ExternalView. +Helix provides a default implementation RoutingTableProvider that caches the cluster state and updates it when there is a change in the cluster. + +``` +manager = HelixManagerFactory.getZKHelixManager(clusterName, + instanceName, + InstanceType.SPECTATOR, + zkConnectString); +manager.connect(); +RoutingTableProvider routingTableProvider = new RoutingTableProvider(); +manager.addExternalViewChangeListener(routingTableProvider); +``` + +### Spectator Code + +In the following code snippet, the application sends the request to a valid instance by interrogating the external view. Suppose the desired resource for this request is in the partition myDB_1. + +``` +// instances = routingTableProvider.getInstances(, "PARTITION_NAME", "PARTITION_STATE"); +instances = routingTableProvider.getInstances("myDB", "myDB_1", "ONLINE"); + +//////////////////////////////////////////////////////////////////////////////////////////////// +// Application-specific code to send a request to one of the instances // +//////////////////////////////////////////////////////////////////////////////////////////////// + +theInstance = instances.get(0); // should choose an instance and throw an exception if none are available +result = theInstance.sendRequest(yourApplicationRequest, responseObject); + +``` + +When the external view changes, the application needs to react by sending requests to a different instance. http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/site/markdown/tutorial_state.md ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/site/markdown/tutorial_state.md b/website/0.6.6/src/site/markdown/tutorial_state.md new file mode 100644 index 0000000..856b8b3 --- /dev/null +++ b/website/0.6.6/src/site/markdown/tutorial_state.md @@ -0,0 +1,131 @@ +<!--- +Licensed to the Apache Software Foundation (ASF) under one +or more contributor license agreements. See the NOTICE file +distributed with this work for additional information +regarding copyright ownership. The ASF licenses this file +to you under the Apache License, Version 2.0 (the +"License"); you may not use this file except in compliance +with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, +software distributed under the License is distributed on an +"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied. See the License for the +specific language governing permissions and limitations +under the License. +--> + +<head> + <title>Tutorial - State Machine Configuration</title> +</head> + +## [Helix Tutorial](./Tutorial.html): State Machine Configuration + +In this chapter, we\'ll learn about the state models provided by Helix, and how to create your own custom state model. + +### State Models + +Helix comes with 3 default state models that are commonly used. It is possible to have multiple state models in a cluster. +Every resource that is added should be configured to use a state model that govern its _ideal state_. + +#### MASTER-SLAVE + +* 3 states: OFFLINE, SLAVE, MASTER +* Maximum number of masters: 1 +* Slaves are based on the replication factor. The replication factor can be specified while adding the resource. + + +#### ONLINE-OFFLINE + +* Has 2 states: OFFLINE and ONLINE. This simple state model is a good starting point for most applications. + +#### LEADER-STANDBY + +* 1 Leader and multiple stand-bys. The idea is that exactly one leader accomplishes a designated task, the stand-bys are ready to take over if the leader fails. + +### Constraints + +In addition to the state machine configuration, one can specify the constraints of states and transitions. + +For example, one can say: + +* MASTER:1 +<br/>Maximum number of replicas in MASTER state at any time is 1 + +* OFFLINE-SLAVE:5 +<br/>Maximum number of OFFLINE-SLAVE transitions that can happen concurrently in the system is 5 in this example. + +#### Dynamic State Constraints + +We also support two dynamic upper bounds for the number of replicas in each state: + +* N: The number of replicas in the state is at most the number of live participants in the cluster +* R: The number of replicas in the state is at most the specified replica count for the partition + +#### State Priority + +Helix uses a greedy approach to satisfy the state constraints. For example, if the state machine configuration says it needs 1 MASTER and 2 SLAVES, but only 1 node is active, Helix must promote it to MASTER. This behavior is achieved by providing the state priority list as \[MASTER, SLAVE\]. + +#### State Transition Priority + +Helix tries to fire as many transitions as possible in parallel to reach the stable state without violating constraints. By default, Helix simply sorts the transitions alphabetically and fires as many as it can without violating the constraints. You can control this by overriding the priority order. + +### Special States + +There are a few Helix-defined states that are important to be aware of. + +#### DROPPED + +The DROPPED state is used to signify a replica that was served by a given participant, but is no longer served. This allows Helix and its participants to effectively clean up. There are two requirements that every new state model should follow with respect to the DROPPED state: + +* The DROPPED state must be defined +* There must be a path to DROPPED for every state in the model + +#### ERROR + +The ERROR state is used whenever the participant serving a partition encountered an error and cannot continue to serve the partition. HelixAdmin has \"reset\" functionality to allow for participants to recover from the ERROR state. + +### Annotated Example + +Below is a complete definition of a Master-Slave state model. Notice the fields marked REQUIRED; these are essential for any state model definition. + +``` +StateModelDefinition stateModel = new StateModelDefinition.Builder("MasterSlave") + // OFFLINE is the state that the system starts in (initial state is REQUIRED) + .initialState("OFFLINE") + + // Lowest number here indicates highest priority, no value indicates lowest priority + .addState("MASTER", 1) + .addState("SLAVE", 2) + .addState("OFFLINE") + + // Note the special inclusion of the DROPPED state (REQUIRED) + .addState(HelixDefinedState.DROPPED.toString()) + + // No more than one master allowed + .upperBound("MASTER", 1) + + // R indicates an upper bound of number of replicas for each partition + .dynamicUpperBound("SLAVE", "R") + + // Add some high-priority transitions + .addTransition("SLAVE", "MASTER", 1) + .addTransition("OFFLINE", "SLAVE", 2) + + // Using the same priority value indicates that these transitions can fire in any order + .addTransition("MASTER", "SLAVE", 3) + .addTransition("SLAVE", "OFFLINE", 3) + + // Not specifying a value defaults to lowest priority + // Notice the inclusion of the OFFLINE to DROPPED transition + // Since every state has a path to OFFLINE, they each now have a path to DROPPED (REQUIRED) + .addTransition("OFFLINE", HelixDefinedState.DROPPED.toString()) + + // Create the StateModelDefinition instance + .build(); + + // Use the isValid() function to make sure the StateModelDefinition will work without issues + Assert.assertTrue(stateModel.isValid()); +``` http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/site/markdown/tutorial_task_framework.md ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/site/markdown/tutorial_task_framework.md b/website/0.6.6/src/site/markdown/tutorial_task_framework.md new file mode 100644 index 0000000..2415a95 --- /dev/null +++ b/website/0.6.6/src/site/markdown/tutorial_task_framework.md @@ -0,0 +1,359 @@ +<!--- +Licensed to the Apache Software Foundation (ASF) under one +or more contributor license agreements. See the NOTICE file +distributed with this work for additional information +regarding copyright ownership. The ASF licenses this file +to you under the Apache License, Version 2.0 (the +"License"); you may not use this file except in compliance +with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, +software distributed under the License is distributed on an +"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied. See the License for the +specific language governing permissions and limitations +under the License. +--> + +<head> + <title>Tutorial - Task Framework</title> +</head> + +## [Helix Tutorial](./Tutorial.html): Task Framework + +Task framework, in Helix, provides executable task scheduling and workflow management. In Helix, three layers of task abstraction have been offered to user for defining their logics of dependencies. The graph shows the relationships between three layers. Workflow can contain multiple jobs. One job can depend on other one. Multiple tasks, including same task different partition and different task different partition, can be added in one job. +Task framework not only can abstract three layers task logics but also helps doing task assignment and rebalancing. User can create a workflow (or a job queue) at first beginning. Then jobs can be added into workflow. Those jobs contain the executable tasks implemented by user. Once workflow is completed, Helix will schedule the works based on the condition user provided. + + + +### Key Concepts +* Task is the basic unit in Helix task framework. It can represents the a single runnable logics that user prefer to execute for each partition (distributed units). +* Job defines one time operation across all the partitions. It contains multiple Tasks and configuration of tasks, such as how many tasks, timeout per task and so on. +* Workflow is directed acyclic graph represents the relationships and running orders of Jobs. In addition, a workflow can also provide customized configuration, for example, Job dependencies. +* JobQueue is another type of Workflow. Different from normal one, JobQueue is not terminated until user kill it. Also JobQueue can keep accepting newly coming jobs. + +### Implement Your Task + +#### [Task Interface](https://github.com/apache/helix/blob/helix-0.6.x/helix-core/src/main/java/org/apache/helix/task/Task.java) + +The task interface contains two methods: run and cancel. User can implement his or her own logic in run function and cancel / roll back logic in cancel function. + +``` +public class MyTask implements Task { + @Override + TaskResult run() { + // Task logic + } + + @Override + void cancel() { + // Cancel logic + } +} +``` + +#### [TaskConfig](https://github.com/apache/helix/blob/helix-0.6.x/helix-core/src/main/java/org/apache/helix/task/TaskConfig.java) + +In helix, usually an object config represents the abstraction of that object, such as TaskConfig, JobConfig and WorkflowConfig. TaskConfig contains configurable task conditions. TaskConfig does not require to have any input to create a new object: + +``` +TaskConfig taskConfig = new TaskConfig(null, null, null, null); +``` + +For these four fields: +* Command: The task command, will use Job command if this is null +* ID: Task unique id, will generate a new ID for this task if input is null +* TaskTargetPartition: Target partition of a target. Could be null +* ConfigMap: Task property key-value map containing all other property stated above, such as command, ID. + +#### Share Content Across Tasks and Jobs + +Task framework also provides a feature that user can store the key-value data per task, job and workflow. The content stored at workflow layer can shared by different jobs belong to this workflow. Similarly content persisted at job layer can shared by different tasks nested in this job. Currently, user can extend the abstract class [UserContentStore](https://github.com/apache/helix/blob/helix-0.6.x/helix-core/src/main/java/org/apache/helix/task/UserContentStore.java) and use two methods putUserContent and getUserContent. It will similar to hash map put and get method except a Scope. The Scope will define which layer this key-value pair to be persisted. + +``` +public class MyTask extends UserContentStore implements Task { + @Override + TaskResult run() { + putUserContent("KEY", "WORKFLOWVALUE", SCOPE.WORKFLOW); + putUserContent("KEY", "JOBVALUE", SCOPE.JOB); + putUserContent("KEY", "TASKVALUE", SCOPE.TASK); + String taskValue = getUserContent("KEY", SCOPE.TASK); + } + ... +} +``` + +#### Return [Task Results](https://github.com/apache/helix/blob/helix-0.6.x/helix-core/src/main/java/org/apache/helix/task/TaskResult.java) + +User can define the TaskResult for a task once it is at final stage (complete or failed). The TaskResult contains two fields: status and info. Status is current Task Status including COMPLETED, CANCELLED, FAILED and FATAL_FAILED. The difference between FAILED and FATAL_FAILED is that once the task defined as FATAL_FAILED, helix will not do the retry for this task and abort it. The other field is information, which is a String type. User can pass any information including error message, description and so on. + +``` +TaskResult run() { + .... + return new TaskResult(TaskResult.Status.FAILED, "ERROR MESSAGE OR OTHER INFORMATION"); +} +``` + +#### Task Retry and Abort + +Helix provides retry logics to users. User can specify the how many times allowed to tolerant failure of tasks under a job. It is a method will be introduced in Following Job Section. Another choice offered to user that if user thinks a task is very critical and do not want to do the retry once it is failed, user can return a TaskResult stated above with FATAL_FAILED status. Then Helix will not do the retry for that task. + +``` +return new TaskResult(TaskResult.Status.FATAL_FAILED, "DO NOT WANT TO RETRY, ERROR MESSAGE"); +``` + +#### [TaskDriver](https://github.com/apache/helix/blob/helix-0.6.x/helix-core/src/main/java/org/apache/helix/task/TaskDriver.java) + +All the control operation related to workflow and job are based on TaskDriver object. TaskDriver offers several APIs to controller, modify and track the tasks. Those APIs will be introduced in each section when they are necessary. TaskDriver object can be created either by [HelixManager](https://github.com/apache/helix/blob/helix-0.6.x/helix-core/src/main/java/org/apache/helix/HelixManager.java) or [ZkClient](https://github.com/apache/helix/blob/helix-0.6.x/helix-core/src/main/java/org/apache/helix/manager/zk/ZkClient.java) with cluster name: + +``` +HelixManager manager = new ZKHelixManager(CLUSTER_NAME, INSTANCE_NAME, InstanceType.PARTICIPANT, ZK_ADDRESS); +TaskDriver taskDriver1 = new TaskDriver(manager); + +TaskDriver taskDriver2 = new TaskDriver(zkclient, CLUSTER_NAME); +``` + +#### Propagate Task Error Message to Helix + +When task encounter an error, it could be returned by TaskResult. Unfortunately, user can not get this TaskResult object directly. But Helix provides error messages persistent. Thus user can fetch the error messages from Helix via TaskDriver, which introduced above. The error messages will be stored in Info field per Job. Thus user have to get JobContext, which is the job status and result object. + +``` +taskDriver.getJobContext("JOBNAME").getInfo(); +``` + +### Creating a Workflow + +#### One-time Workflow + +As common use, one-time workflow will be the default workflow as user created. The first step is to create a WorkflowConfig.Builder object with workflow name. Then all configs can be set in WorkflowConfig.Builder. Once the configuration is done, [WorkflowConfig](https://github.com/apache/helix/blob/helix-0.6.x/helix-core/src/main/java/org/apache/helix/task/WorkflowConfig.java) object can be got from WorkflowConfig.Builder object. +We have two rules to validate the Workflow configuration: +* Expiry time should not be less than 0 +* Schedule config should be valid either one-time or a positive interval magnitude (Recurrent workflow) +Example: + +``` +Workflow.Builder myWorkflowBuilder = new Workflow.Builder("MyWorkflow"); +myWorkflowBuilder.setExpiry(5000L); +Workflow myWorkflow = myWorkflowBuilder.build(); +``` + +#### Recurrent Workflow + +Recurrent workflow is the workflow scheduled periodically. The only config different from One-time workflow is to set a recurrent [ScheduleConfig](https://github.com/apache/helix/blob/helix-0.6.x/helix-core/src/main/java/org/apache/helix/task/ScheduleConfig.java). There two methods in ScheduleConfig can help you to create a ScheduleConfig object: recurringFromNow and recurringFromDate. Both of them needs recurUnit (time unit for recurrent) and recurInteval (magnitude of recurrent interval). Here's the example: + +``` +ScheduleConfig myConfig1 = ScheduleConfig.recurringFFromNow(TimeUnit.MINUTES, 5L); +ScheduleConfig myConfig2 = ScheduleConfig.recurringFFromDate(Calendar.getInstance.getTime, TimeUnit.HOURS, 10L); +``` + +Once this schedule config is created. It could be set in the workflow config: + +``` +Workflow.Builder myWorkflowBuilder = new Workflow.Builder("MyWorkflow"); +myWorkflowBuilder.setExpiry(2000L) + .setScheduleConfig(ScheduleConfig.recurringFromNow(TimeUnit.DAYS, 5)); +Workflow myWorkflow = myWorkflowBuilder.build(); +``` + +#### Start a Workflow + +Start a workflow is just using taskdrive to start it. Since this is an async call, after start the workflow, user can keep doing actions. + +``` +taskDriver.start(myWorkflow); +``` + +#### Stop a Workflow + +Stop workflow can be executed via TaskDriver: + +``` +taskDriver.stop(myWorkflow); +``` + +#### Resume a Workflow + +Once the workflow is stopped, it does not mean the workflow is gone. Thus user can resume the workflow that has been stopped. Using TaskDriver resume the workflow: + +``` +taskDriver.resume(myWorkflow); +``` + +#### Delete a Workflow + +Simliar to start, stop and resume, delete operation is supported by TaskDriver. + +``` +taskDriver.delete(myWorkflow); +``` + +#### Add a Job + +WARNING: Job can only be added to WorkflowConfig.Builder. Once WorkflowConfig built, no job can be added! For creating a Job, please refering following section (Create a Job) + +``` +myWorkflowBuilder.addJob("JobName", jobConfigBuilder); +``` + +#### Add a Job dependency + +Jobs can have dependencies. If one job2 depends job1, job2 will not be scheduled until job1 finished. + +``` +myWorkflowBuilder.addParentChildDependency(ParentJobName, ChildJobName); +``` + +#### Additional Workflow Options + +| Additional Config Options | Detail | +| ------------------------- | ------ | +| _setJobDag(JobDag v)_ | If user already defined the job DAG, it could be set with this method. | +| _setExpiry(long v, TimeUnit unit)_ | Set the expiration time for this workflow. | +| _setFailureThreshold(int failureThreshold)_ | Set the failure threshold for this workflow, once job failures reach this number, the workflow will be failed. | +| _setWorkflowType(String workflowType)_ | Set the user defined workflowType for this workflow. | +| _setTerminable(boolean isTerminable)_ | Set the whether this workflow is terminable or not. | +| _setCapacity(int capacity)_ | Set the number of jobs that workflow can hold before reject further jobs. Only used when workflow is not terminable. | +| _setTargetState(TargetState v)_ | Set the final state of this workflow. | + +### Creating a Queue + +[Job queue](https://github.com/apache/helix/blob/helix-0.6.x/helix-core/src/main/java/org/apache/helix/task/JobQueue.java) is another shape of workflow. Here listed different between a job queue and workflow: + +| Property | Workflow | Job Queue | +| -------- | -------- | --------- | +| Existing time | Workflow will be deleted after it is done. | Job queue will be there until user delete it. | +| Add jobs | Once workflow is build, no job can be added. | Job queue can keep accepting jobs. | +| Parallel run | Allows parallel run for jobs without dependencies | No parallel run allowed except setting _ParallelJobs_ | + +For creating a job queue, user have to provide queue name and workflow config (please refer above Create a Workflow). Similar to other task object, create a JobQueue.Builder first. Then JobQueue can be validated and generated via build function. + +``` +WorkflowConfig.Builder myWorkflowCfgBuilder = new WorkflowConfig.Builder().setWorkFlowType("MyType"); +JobQueue jobQueue = new JobQueue.Builder("MyQueueName").setWorkflowConfig(myWorkflowCfgBuilder.build()).build(); +``` + +####Append Job to Queue + +WARNING:Different from normal workflow, job for JobQueue can be append even in anytime. Similar to workflow add a job, job can be appended via enqueueJob function via TaskDriver. + +``` +jobQueueBuilder.enqueueJob("JobName", jobConfigBuilder); +``` + +####Delete Job from Queue + +Helix allowed user to delete a job from existing queue. We offers delete API in TaskDriver to do this. Delete job from queue and this queue has to be stopped. Then user can resume the job once delete success. + +``` +taskDriver.stop("QueueName"); +taskDriver.deleteJob("QueueName", "JobName"); +taskDriver.resume("QueueName"); +``` + +####Additional Option for JobQueue + +_setParallelJobs(int parallelJobs)_ : Set the how many jobs can parallel running, except there is any dependencies. + +###Create a Job + +Before generate a [JobConfig](https://github.com/apache/helix/blob/helix-0.6.x/helix-core/src/main/java/org/apache/helix/task/JobConfig.java) object, user still have to use JobConfig.Builder to build JobConfig. + +``` +JobConfig.Builder myJobCfgBuilder = new JobConfig.Builder(); +JobConfig myJobCfg = myJobCfgBuilder.build(); +``` + +Helix has couple rules to validate a job: +* Each job must at least have one task to execute. For adding tasks and task rules please refer following section Add Tasks. +* Task timeout should not less than zero. +* Number of concurrent tasks per instances should not less than one. +* Maximum attempts per task should not less than one +* There must be a workflow name + +#### Add Tasks + +There are two ways of adding tasks: +* Add by TaskConfig. Tasks can be added via adding TaskConfigs. User can create a List of TaskConfigs or add TaskConfigMap, which is a task id to TaskConfig mapping. + +``` +TaskConfig taskCfg = new TaskConfig(null, null, null, null); +List<TaskConfig> taskCfgs = new ArrayList<TaskConfig>(); +myJobCfg.addTaskConfigs(taskCfgs); + +Map<String, TaskConfig> taskCfgMap = new HashMap<String, TaskConfig>(); +taskCfgMap.put(taskCfg.getId(), taskCfg); +myJobCfg.addTaskConfigMap(taskCfgMap); +``` + +* Add by Job command. If user does not want to specify each TaskConfig, we can create identical tasks based on Job command with number of tasks. + +``` +myJobCfg.setCommand("JobCommand").setNumberOfTasks(10); +``` +WARNING: Either user provides TaskConfigs / TaskConfigMap or both of Job command and number tasks (except Targeted Job, refer following section) . Otherwise, validation will be failed. + +#### Generic Job + +Generic Job is the default job created. It does not have targeted resource. Thus this generic job could be assigned to one of eligble instances. + +#### Targeted Job + +Targeted Job has set up the target resource. For this kind of job, Job command is necessary, but number of tasks is not. The tasks will depends on the partion number of targeted resource. To set target resource, just put target resource name to JobConfig.Builder. + +``` +myJobCfgBuilder.setTargetResource("TargetResourceName"); +``` + +In addition, user can specify the instance target state. For example, if user want to run the Task on "Master" state instance, setTargetPartitionState method can help to set the partition to assign to specific instance. + +``` +myJobCfgBuilder.setTargetPartitionState(Arrays.asList(new String[]{"Master", "Slave"})); +``` + +#### Instance Group + +Grouping jobs with targeted group of instances feature has been supported. User firstly have to define the instance group tag for instances, which means label some instances with specific tag. Then user can put those tags to a job that only would like to assigned to those instances. For example, customer data only available on instance 1, 2, 3. These three instances can be tagged as "CUSTOMER" and customer data related jobs can set the instance group tag "CUSTOMER". Thus customer data related jobs will only assign to instance 1, 2, 3. +To add instance group tag, just set it in JobConfig.Builder: + +``` +jobCfg.setInstanceGroupTag("INSTANCEGROUPTAG"); +``` + +#### Additional Job Options + +| Operation | Detail | +| --------- | ------ | +| _setWorkflow(String workflowName)_ | Set the workflow that this job belongs to | +| _setTargetPartions(List\<String\> targetPartionNames)_ | Set list of partition names | +| _setTargetPartionStates(Set\<String\>)_ | Set the partition states | +| _setCommand(String command)_ | Set the job command | +| _setJobCommandConfigMap(Map\<String, String\> v)_ | Set the job command config maps | +| _setTimeoutPerTask(long v)_ | Set the timeout for each task | +| _setNumConcurrentTasksPerInstance(int v)_ | Set number of tasks can concurrent run on same instance | +| _setMaxAttemptsPerTask(int v)_ | Set times of retry for a task | +| _setFailureThreshold(int v)_ | Set failure tolerance of tasks for this job | +| _setTaskRetryDelay(long v)_ | Set the delay time before a task retry | +| _setIgnoreDependentJobFailure(boolean ignoreDependentJobFailure)_ | Set whether ignore the job failure of parent job of this job | +| _setJobType(String jobType)_ | Set the job type of this job | + +### Monitor the status of your job +As we introduced the excellent util TaskDriver in Workflow Section, we have extra more functionality that provided to user. The user can synchronized wait Job or Workflow until it reaches certain STATES. The function Helix have API pollForJobState and pollForWorkflowState. For pollForJobState, it accepts arguments: +* Workflow name, required +* Job name, required +* Timeout, not required, will be three minutes if user choose function without timeout argument. Time unit is milisecond. +* TaskStates, at least one state. This function can accept multiple TaskState, will end function until one of those TaskState reaches. +For example: + +``` +taskDriver.pollForJobState("MyWorkflowName", "MyJobName", 180000L, TaskState.FAILED, TaskState.FATAL_FAILED); +taskDriver.pollForJobState("MyWorkflowName", "MyJobName", TaskState.COMPLETED); +``` + +For pollForWorkflowState, it accepts similar arguments except Job name. For example: + +``` +taskDriver.pollForWorkflowState("MyWorkflowName", 180000L, TaskState.FAILED, TaskState.FATAL_FAILED); +taskDriver.pollForWorkflowState("MyWorkflowName", TaskState.COMPLETED); +``` http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/site/markdown/tutorial_throttling.md ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/site/markdown/tutorial_throttling.md b/website/0.6.6/src/site/markdown/tutorial_throttling.md new file mode 100644 index 0000000..16a6f81 --- /dev/null +++ b/website/0.6.6/src/site/markdown/tutorial_throttling.md @@ -0,0 +1,39 @@ +<!--- +Licensed to the Apache Software Foundation (ASF) under one +or more contributor license agreements. See the NOTICE file +distributed with this work for additional information +regarding copyright ownership. The ASF licenses this file +to you under the Apache License, Version 2.0 (the +"License"); you may not use this file except in compliance +with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, +software distributed under the License is distributed on an +"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied. See the License for the +specific language governing permissions and limitations +under the License. +--> + +<head> + <title>Tutorial - Throttling</title> +</head> + +## [Helix Tutorial](./Tutorial.html): Throttling + +In this chapter, we\'ll learn how to control the parallel execution of cluster tasks. Only a centralized cluster manager with global knowledge (i.e. Helix) is capable of coordinating this decision. + +### Throttling + +Since all state changes in the system are triggered through transitions, Helix can control the number of transitions that can happen in parallel. Some of the transitions may be lightweight, but some might involve moving data, which is quite expensive from a network and IOPS perspective. + +Helix allows applications to set a threshold on transitions. The threshold can be set at multiple scopes: + +* MessageType e.g STATE_TRANSITION +* TransitionType e.g SLAVE-MASTER +* Resource e.g database +* Node i.e per-node maximum transitions in parallel + + http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/site/markdown/tutorial_user_def_rebalancer.md ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/site/markdown/tutorial_user_def_rebalancer.md b/website/0.6.6/src/site/markdown/tutorial_user_def_rebalancer.md new file mode 100644 index 0000000..2149739 --- /dev/null +++ b/website/0.6.6/src/site/markdown/tutorial_user_def_rebalancer.md @@ -0,0 +1,172 @@ +<!--- +Licensed to the Apache Software Foundation (ASF) under one +or more contributor license agreements. See the NOTICE file +distributed with this work for additional information +regarding copyright ownership. The ASF licenses this file +to you under the Apache License, Version 2.0 (the +"License"); you may not use this file except in compliance +with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, +software distributed under the License is distributed on an +"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied. See the License for the +specific language governing permissions and limitations +under the License. +--> + +<head> + <title>Tutorial - User-Defined Rebalancing</title> +</head> + +## [Helix Tutorial](./Tutorial.html): User-Defined Rebalancing + +Even though Helix can compute both the location and the state of replicas internally using a default fully-automatic rebalancer, specific applications may require rebalancing strategies that optimize for different requirements. Thus, Helix allows applications to plug in arbitrary rebalancer algorithms that implement a provided interface. One of the main design goals of Helix is to provide maximum flexibility to any distributed application. Thus, it allows applications to fully implement the rebalancer, which is the core constraint solver in the system, if the application developer so chooses. + +Whenever the state of the cluster changes, as is the case when participants join or leave the cluster, Helix automatically calls the rebalancer to compute a new mapping of all the replicas in the resource. When using a pluggable rebalancer, the only required step is to register it with Helix. Subsequently, no additional bootstrapping steps are necessary. Helix uses reflection to look up and load the class dynamically at runtime. As a result, it is also technically possible to change the rebalancing strategy used at any time. + +The Rebalancer interface is as follows: + +``` +void init(HelixManager manager); + +IdealState computeNewIdealState(String resourceName, IdealState currentIdealState, + final CurrentStateOutput currentStateOutput, final ClusterDataCache clusterData); +``` +The first parameter is the resource to rebalance, the second is pre-existing ideal mappings, the third is a snapshot of the actual placements and state assignments, and the fourth is a full cache of all of the cluster data available to Helix. Internally, Helix implements the same interface for its own rebalancing routines, so a user-defined rebalancer will be cognizant of the same information about the cluster as an internal implementation. Helix strives to provide applications the ability to implement algorithms that may require a large portion of the entire state of the cluster to make the best placement and state assignment decisions possible. + +An IdealState is a full representation of the location of each replica of each partition of a given resource. This is a simple representation of the placement that the algorithm believes is the best possible. If the placement meets all defined constraints, this is what will become the actual state of the distributed system. + +### Specifying a Rebalancer +For implementations that set up the cluster through existing code, the following HelixAdmin calls will update the Rebalancer class: + +``` +IdealState idealState = helixAdmin.getResourceIdealState(clusterName, resourceName); +idealState.setRebalanceMode(RebalanceMode.USER_DEFINED); +idealState.setRebalancerClassName(className); +helixAdmin.setResourceIdealState(clusterName, resourceName, idealState); +``` + +There are two key fields to set to specify that a pluggable rebalancer should be used. First, the rebalance mode should be set to USER_DEFINED, and second the rebalancer class name should be set to a class that implements Rebalancer and is within the scope of the project. The class name is a fully-qualified class name consisting of its package and its name. Without specification of the USER_DEFINED mode, the user-defined rebalancer class will not be used even if specified. Furthermore, Helix will not attempt to rebalance the resources through its standard routines if its mode is USER_DEFINED, regardless of whether or not a rebalancer class is registered. + +### Example + +In the next release (0.7.0), we will provide a full recipe of a user-defined rebalancer in action. + +Consider the case where partitions are locks in a lock manager and 6 locks are to be distributed evenly to a set of participants, and only one participant can hold each lock. We can define a rebalancing algorithm that simply takes the modulus of the lock number and the number of participants to evenly distribute the locks across participants. Helix allows capping the number of partitions a participant can accept, but since locks are lightweight, we do not need to define a restriction in this case. The following is a succinct implementation of this algorithm. + +``` +@Override +IdealState computeNewIdealState(String resourceName, IdealState currentIdealState, + final CurrentStateOutput currentStateOutput, final ClusterDataCache clusterData) { + // Get the list of live participants in the cluster + List<String> liveParticipants = new ArrayList<String>(clusterData.getLiveInstances().keySet()); + + // Count the number of participants allowed to lock each lock (in this example, this is 1) + int lockHolders = Integer.parseInt(currentIdealState.getReplicas()); + + // Fairly assign the lock state to the participants using a simple mod-based sequential + // assignment. For instance, if each lock can be held by 3 participants, lock 0 would be held + // by participants (0, 1, 2), lock 1 would be held by (1, 2, 3), and so on, wrapping around the + // number of participants as necessary. + int i = 0; + for (String partition : currentIdealState.getPartitionSet()) { + List<String> preferenceList = new ArrayList<String>(); + for (int j = i; j < i + lockHolders; j++) { + int participantIndex = j % liveParticipants.size(); + String participant = liveParticipants.get(participantIndex); + // enforce that a participant can only have one instance of a given lock + if (!preferenceList.contains(participant)) { + preferenceList.add(participant); + } + } + currentIdealState.setPreferenceList(partition, preferenceList); + i++; + } + return assignment; +} +``` + +Here are the IdealState preference lists emitted by the user-defined rebalancer for a 3-participant system whenever there is a change to the set of participants. + +* Participant_A joins + +``` +{ + "lock_0": ["Participant_A"], + "lock_1": ["Participant_A"], + "lock_2": ["Participant_A"], + "lock_3": ["Participant_A"], + "lock_4": ["Participant_A"], + "lock_5": ["Participant_A"], +} +``` + +A preference list is a mapping for each resource of partition to the participants serving each replica. The state model is a simple LOCKED/RELEASED model, so participant A holds all lock partitions in the LOCKED state. + +* Participant_B joins + +``` +{ + "lock_0": ["Participant_A"], + "lock_1": ["Participant_B"], + "lock_2": ["Participant_A"], + "lock_3": ["Participant_B"], + "lock_4": ["Participant_A"], + "lock_5": ["Participant_B"], +} +``` + +Now that there are two participants, the simple mod-based function assigns every other lock to the second participant. On any system change, the rebalancer is invoked so that the application can define how to redistribute its resources. + +* Participant_C joins (steady state) + +``` +{ + "lock_0": ["Participant_A"], + "lock_1": ["Participant_B"], + "lock_2": ["Participant_C"], + "lock_3": ["Participant_A"], + "lock_4": ["Participant_B"], + "lock_5": ["Participant_C"], +} +``` + +This is the steady state of the system. Notice that four of the six locks now have a different owner. That is because of the naïve modulus-based assignmemt approach used by the user-defined rebalancer. However, the interface is flexible enough to allow you to employ consistent hashing or any other scheme if minimal movement is a system requirement. + +* Participant_B fails + +``` +{ + "lock_0": ["Participant_A"], + "lock_1": ["Participant_C"], + "lock_2": ["Participant_A"], + "lock_3": ["Participant_C"], + "lock_4": ["Participant_A"], + "lock_5": ["Participant_C"], +} +``` + +On any node failure, as in the case of node addition, the rebalancer is invoked automatically so that it can generate a new mapping as a response to the change. Helix ensures that the Rebalancer has the opportunity to reassign locks as required by the application. + +* Participant_B (or the replacement for the original Participant_B) rejoins + +``` +{ + "lock_0": ["Participant_A"], + "lock_1": ["Participant_B"], + "lock_2": ["Participant_C"], + "lock_3": ["Participant_A"], + "lock_4": ["Participant_B"], + "lock_5": ["Participant_C"], +} +``` + +The rebalancer was invoked once again and the resulting IdealState preference lists reflect the steady state. + +### Caveats +- The rebalancer class must be available at runtime, or else Helix will not attempt to rebalance at all +- The Helix controller will only take into account the preference lists in the new IdealState for this release. In 0.7.0, Helix rebalancers will be able to compute the full resource assignment, including the states. +- Helix does not currently persist the new IdealState computed by the user-defined rebalancer. However, the Helix property store is available for saving any computed state. In 0.7.0, Helix will persist the result of running the rebalancer. http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/site/markdown/tutorial_yaml.md ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/site/markdown/tutorial_yaml.md b/website/0.6.6/src/site/markdown/tutorial_yaml.md new file mode 100644 index 0000000..1e4772e --- /dev/null +++ b/website/0.6.6/src/site/markdown/tutorial_yaml.md @@ -0,0 +1,102 @@ +<!--- +Licensed to the Apache Software Foundation (ASF) under one +or more contributor license agreements. See the NOTICE file +distributed with this work for additional information +regarding copyright ownership. The ASF licenses this file +to you under the Apache License, Version 2.0 (the +"License"); you may not use this file except in compliance +with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, +software distributed under the License is distributed on an +"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied. See the License for the +specific language governing permissions and limitations +under the License. +--> + +<head> + <title>Tutorial - YAML Cluster Setup</title> +</head> + +## [Helix Tutorial](./Tutorial.html): YAML Cluster Setup + +As an alternative to using Helix Admin to set up the cluster, its resources, constraints, and the state model, Helix supports bootstrapping a cluster configuration based on a YAML file. Below is an annotated example of such a file for a simple distributed lock manager where a lock can only be LOCKED or RELEASED, and each lock only allows a single participant to hold it in the LOCKED state. + +``` +clusterName: lock-manager-custom-rebalancer # unique name for the cluster (required) +resources: + - name: lock-group # unique resource name (required) + rebalancer: # required + mode: USER_DEFINED # required - USER_DEFINED means we will provide our own rebalancer + class: org.apache.helix.userdefinedrebalancer.LockManagerRebalancer # required for USER_DEFINED + partitions: + count: 12 # number of partitions for the resource (default is 1) + replicas: 1 # number of replicas per partition (default is 1) + stateModel: + name: lock-unlock # model name (required) + states: [LOCKED, RELEASED, DROPPED] # the list of possible states (required if model not built-in) + transitions: # the list of possible transitions (required if model not built-in) + - name: Unlock + from: LOCKED + to: RELEASED + - name: Lock + from: RELEASED + to: LOCKED + - name: DropLock + from: LOCKED + to: DROPPED + - name: DropUnlock + from: RELEASED + to: DROPPED + - name: Undrop + from: DROPPED + to: RELEASED + initialState: RELEASED # (required if model not built-in) + constraints: + state: + counts: # maximum number of replicas of a partition that can be in each state (required if model not built-in) + - name: LOCKED + count: "1" + - name: RELEASED + count: "-1" + - name: DROPPED + count: "-1" + priorityList: [LOCKED, RELEASED, DROPPED] # states in order of priority (all priorities equal if not specified) + transition: # transitions priority to enforce order that transitions occur + priorityList: [Unlock, Lock, Undrop, DropUnlock, DropLock] # all priorities equal if not specified +participants: # list of nodes that can serve replicas (optional if dynamic joining is active, required otherwise) + - name: localhost_12001 + host: localhost + port: 12001 + - name: localhost_12002 + host: localhost + port: 12002 + - name: localhost_12003 + host: localhost + port: 12003 +``` + +Using a file like the one above, the cluster can be set up either with the command line: + +``` +helix/helix-core/target/helix-core/pkg/bin/YAMLClusterSetup.sh localhost:2199 lock-manager-config.yaml +``` + +or with code: + +``` +YAMLClusterSetup setup = new YAMLClusterSetup(zkAddress); +InputStream input = + Thread.currentThread().getContextClassLoader() + .getResourceAsStream("lock-manager-config.yaml"); +YAMLClusterSetup.YAMLClusterConfig config = setup.setupCluster(input); +``` + +Some notes: + +- A rebalancer class is only required for the USER_DEFINED mode. It is ignored otherwise. + +- Built-in state models, like OnlineOffline, LeaderStandby, and MasterSlave, or state models that have already been added only require a name for stateModel. If partition and/or replica counts are not provided, a value of 1 is assumed. http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/site/resources/.htaccess ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/site/resources/.htaccess b/website/0.6.6/src/site/resources/.htaccess new file mode 100644 index 0000000..d5c7bf3 --- /dev/null +++ b/website/0.6.6/src/site/resources/.htaccess @@ -0,0 +1,20 @@ +# +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +# KIND, either express or implied. See the License for the +# specific language governing permissions and limitations +# under the License. +# + +Redirect /download.html /download.cgi http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/site/resources/download.cgi ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/site/resources/download.cgi b/website/0.6.6/src/site/resources/download.cgi new file mode 100755 index 0000000..f9a0e30 --- /dev/null +++ b/website/0.6.6/src/site/resources/download.cgi @@ -0,0 +1,22 @@ +#!/bin/sh +# Just call the standard mirrors.cgi script. It will use download.html +# as the input template. +# +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +# KIND, either express or implied. See the License for the +# specific language governing permissions and limitations +# under the License. +# +exec /www/www.apache.org/dyn/mirrors/mirrors.cgi $* http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/site/resources/images/PFS-Generic.png ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/site/resources/images/PFS-Generic.png b/website/0.6.6/src/site/resources/images/PFS-Generic.png new file mode 100644 index 0000000..7eea3a0 Binary files /dev/null and b/website/0.6.6/src/site/resources/images/PFS-Generic.png differ http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/site/resources/images/RSYNC_BASED_PFS.png ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/site/resources/images/RSYNC_BASED_PFS.png b/website/0.6.6/src/site/resources/images/RSYNC_BASED_PFS.png new file mode 100644 index 0000000..0cc55ae Binary files /dev/null and b/website/0.6.6/src/site/resources/images/RSYNC_BASED_PFS.png differ http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/site/resources/images/TaskFrameworkLayers.png ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/site/resources/images/TaskFrameworkLayers.png b/website/0.6.6/src/site/resources/images/TaskFrameworkLayers.png new file mode 100644 index 0000000..4ee24a8 Binary files /dev/null and b/website/0.6.6/src/site/resources/images/TaskFrameworkLayers.png differ http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/site/site.xml ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/site/site.xml b/website/0.6.6/src/site/site.xml new file mode 100644 index 0000000..6340995 --- /dev/null +++ b/website/0.6.6/src/site/site.xml @@ -0,0 +1,140 @@ +<?xml version="1.0" encoding="ISO-8859-1"?> +<!-- + Licensed to the Apache Software Foundation (ASF) under one or more + contributor license agreements. See the NOTICE file distributed with + this work for additional information regarding copyright ownership. + The ASF licenses this file to You under the Apache License, Version 2.0 + (the "License"); you may not use this file except in compliance with + the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +--> +<project name="Apache Helix"> + <bannerLeft> + <src>../images/helix-logo.jpg</src> + <href>http://helix.apache.org/</href> + </bannerLeft> + <bannerRight> + <src>../images/feather_small.gif</src> + <href>http://www.apache.org/</href> + </bannerRight> + <version position="none"/> + + <publishDate position="right"/> + + <skin> + <groupId>lt.velykis.maven.skins</groupId> + <artifactId>reflow-maven-skin</artifactId> + <version>1.0.0</version> + </skin> + + <body> + + <head> + <script type="text/javascript"> + + var _gaq = _gaq || []; + _gaq.push(['_setAccount', 'UA-3211522-12']); + _gaq.push(['_trackPageview']); + + (function() { + var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; + ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; + var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); + })(); + + </script> + + </head> + + <breadcrumbs position="left"> + <item name="Apache Helix" href="http://helix.apache.org/"/> + <item name="Release 0.6.6" href="http://helix.apache.org/0.6.6-docs/"/> + </breadcrumbs> + + <links> + <item name="Helix 0.6.6" href="./index.html"/> + </links> + + <menu name="Get Helix"> + <item name="Download" href="./download.html"/> + <item name="Building" href="./Building.html"/> + <item name="Release Notes" href="./releasenotes/release-0.6.6.html"/> + </menu> + + <menu name="Hands-On"> + <item name="Quick Start" href="./Quickstart.html"/> + <item name="Tutorial" href="./Tutorial.html"/> + <item name="Javadocs" href="http://helix.apache.org/javadocs/0.6.6"/> + </menu> + + <menu name="Recipes"> + <item name="Distributed lock manager" href="./recipes/lock_manager.html"/> + <item name="Rabbit MQ consumer group" href="./recipes/rabbitmq_consumer_group.html"/> + <item name="Rsync replicated file store" href="./recipes/rsync_replicated_file_store.html"/> + <item name="Service discovery" href="./recipes/service_discovery.html"/> + <item name="Distributed task DAG execution" href="./recipes/task_dag_execution.html"/> + </menu> +<!-- + <menu ref="reports" inherit="bottom"/> + <menu ref="modules" inherit="bottom"/> + + + <menu name="ASF"> + <item name="How Apache Works" href="http://www.apache.org/foundation/how-it-works.html"/> + <item name="Foundation" href="http://www.apache.org/foundation/"/> + <item name="Sponsoring Apache" href="http://www.apache.org/foundation/sponsorship.html"/> + <item name="Thanks" href="http://www.apache.org/foundation/thanks.html"/> + </menu> +--> + <footer> + <div class="row span16"><div>Apache Helix, Apache, the Apache feather logo, and the Apache Helix project logos are trademarks of The Apache Software Foundation. + All other marks mentioned may be trademarks or registered trademarks of their respective owners.</div> + <a href="${project.url}/privacy-policy.html">Privacy Policy</a> + </div> + </footer> + + + </body> + + <custom> + <reflowSkin> + <theme>default</theme> + <highlightJs>false</highlightJs> + <brand> + <name>Apache Helix</name> + <href>http://helix.apache.org</href> + </brand> + <slogan>A cluster management framework for partitioned and replicated distributed resources</slogan> + <bottomNav> + <column>Get Helix</column> + <column>Hands-On</column> + <column>Recipes</column> + </bottomNav> + <pages> + <index> + <sections> + <columns>3</columns> + </sections> + </index> + </pages> + </reflowSkin> + <!--fluidoSkin> + <topBarEnabled>true</topBarEnabled> + <sideBarEnabled>true</sideBarEnabled> + <googleSearch></googleSearch> + <twitter> + <user>ApacheHelix</user> + <showUser>true</showUser> + <showFollowers>false</showFollowers> + </twitter> + </fluidoSkin--> + </custom> + +</project> http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/site/xdoc/download.xml.vm ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/site/xdoc/download.xml.vm b/website/0.6.6/src/site/xdoc/download.xml.vm new file mode 100644 index 0000000..e5666c2 --- /dev/null +++ b/website/0.6.6/src/site/xdoc/download.xml.vm @@ -0,0 +1,214 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- +Licensed to the Apache Software Foundation (ASF) under one +or more contributor license agreements. See the NOTICE file +distributed with this work for additional information +regarding copyright ownership. The ASF licenses this file +to you under the Apache License, Version 2.0 (the +"License"); you may not use this file except in compliance +with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, +software distributed under the License is distributed on an +"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied. See the License for the +specific language governing permissions and limitations +under the License. + +--> +#set( $releaseName = "0.6.6" ) +#set( $releaseDate = "11/02/2016" ) +<document xmlns="http://maven.apache.org/XDOC/2.0"; xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; + xsi:schemaLocation="http://maven.apache.org/XDOC/2.0 http://maven.apache.org/xsd/xdoc-2.0.xsd";> + + <properties> + <title>Apache Helix Downloads</title> + <author email="[email protected]">Apache Helix Documentation Team</author> + </properties> + + <body> + <div class="toc_container"> + <macro name="toc"> + <param name="class" value="toc"/> + </macro> + </div> + + <section name="Introduction"> + <p>Apache Helix artifacts are distributed in source and binary form under the terms of the + <a href="http://www.apache.org/licenses/LICENSE-2.0";>Apache License, Version 2.0</a>. + See the included <tt>LICENSE</tt> and <tt>NOTICE</tt> files included in each artifact for additional license + information. + </p> + <p>Use the links below to download a source distribution of Apache Helix. + It is good practice to <a href="#Verifying_Releases">verify the integrity</a> of the distribution files.</p> + </section> + + <section name="Release"> + <p>Release date: ${releaseDate} </p> + <p><a href="releasenotes/release-${releaseName}.html">${releaseName} Release notes</a></p> + <a name="mirror"/> + <subsection name="Mirror"> + + <p> + [if-any logo] + <a href="[link]"> + <img align="right" src="[logo]" border="0" + alt="logo"/> + </a> + [end] + The currently selected mirror is + <b>[preferred]</b>. + If you encounter a problem with this mirror, + please select another mirror. + If all mirrors are failing, there are + <i>backup</i> + mirrors + (at the end of the mirrors list) that should be available. + </p> + + <form action="[location]" method="get" id="SelectMirror" class="form-inline"> + Other mirrors: + <select name="Preferred" class="input-xlarge"> + [if-any http] + [for http] + <option value="[http]">[http]</option> + [end] + [end] + [if-any ftp] + [for ftp] + <option value="[ftp]">[ftp]</option> + [end] + [end] + [if-any backup] + [for backup] + <option value="[backup]">[backup] (backup)</option> + [end] + [end] + </select> + <input type="submit" value="Change" class="btn"/> + </form> + + <p> + You may also consult the + <a href="http://www.apache.org/mirrors/";>complete list of mirrors.</a> + </p> + + </subsection> + <subsection name="${releaseName} Sources"> + <table> + <thead> + <tr> + <th>Artifact</th> + <th>Signatures</th> + <th>Hashes</th> + </tr> + </thead> + <tbody> + <tr> + <td> + <a href="[preferred]helix/${releaseName}/src/helix-${releaseName}-src.zip">helix-${releaseName}-src.zip</a> + </td> + <td> + <a href="http://www.apache.org/dist/helix/${releaseName}/src/helix-${releaseName}-src.zip.asc";>asc</a> + </td> + <td> + <a href="http://www.apache.org/dist/helix/${releaseName}/src/helix-${releaseName}-src.zip.md5";>md5</a> + <a href="http://www.apache.org/dist/helix/${releaseName}/src/helix-${releaseName}-src.zip.sha1";>sha1</a> + </td> + </tr> + </tbody> + </table> + </subsection> + <subsection name="${releaseName} Binaries"> + <table> + <thead> + <tr> + <th>Artifact</th> + <th>Signatures</th> + <th>Hashes</th> + </tr> + </thead> + <tbody> + <tr> + <td> + <a href="[preferred]helix/${releaseName}/binaries/helix-core-${releaseName}-pkg.tar">helix-core-${releaseName}-pkg.tar</a> + </td> + <td> + <a href="http://www.apache.org/dist/helix/${releaseName}/binaries/helix-core-${releaseName}-pkg.tar.asc";>asc</a> + </td> + <td> + <a href="http://www.apache.org/dist/helix/${releaseName}/binaries/helix-core-${releaseName}-pkg.tar.md5";>md5</a> + <a href="http://www.apache.org/dist/helix/${releaseName}/binaries/helix-core-${releaseName}-pkg.tar.sha1";>sha1</a> + </td> + </tr> + <tr> + <td> + <a href="[preferred]helix/${releaseName}/binaries/helix-admin-webapp-${releaseName}-pkg.tar">helix-admin-webapp-${releaseName}-pkg.tar</a> + </td> + <td> + <a href="http://www.apache.org/dist/helix/${releaseName}/binaries/helix-admin-webapp-${releaseName}-pkg.tar.asc";>asc</a> + </td> + <td> + <a href="http://www.apache.org/dist/helix/${releaseName}/binaries/helix-admin-webapp-${releaseName}-pkg.tar.md5";>md5</a> + <a href="http://www.apache.org/dist/helix/${releaseName}/binaries/helix-admin-webapp-${releaseName}-pkg.tar.sha1";>sha1</a> + </td> + </tr> + <tr> + <td> + <a href="[preferred]helix/${releaseName}/binaries/helix-agent-${releaseName}-pkg.tar">helix-agent-${releaseName}-pkg.tar</a> + </td> + <td> + <a href="http://www.apache.org/dist/helix/${releaseName}/binaries/helix-agent-${releaseName}-pkg.tar.asc";>asc</a> + </td> + <td> + <a href="http://www.apache.org/dist/helix/${releaseName}/binaries/helix-agent-${releaseName}-pkg.tar.md5";>md5</a> + <a href="http://www.apache.org/dist/helix/${releaseName}/binaries/helix-agent-${releaseName}-pkg.tar.sha1";>sha1</a> + </td> + </tr> + </tbody> + </table> + </subsection> + </section> + +<!-- <section name="Older Releases"> + </section>--> + + <section name="Verifying Releases"> + <p>It is essential that you verify the integrity of the downloaded file using the PGP signature (<tt>.asc</tt> file) or a hash (<tt>.md5</tt> or <tt>.sha1</tt> file). Please read <a href="http://www.apache.org/info/verification.html";>Verifying Apache Software Foundation Releases</a> for more information on why you should verify our releases.</p> + <p>The PGP signature can be verified using <a href="http://www.pgpi.org/";>PGP</a> or <a href="http://www.gnupg.org/";>GPG</a>. First download the <a href="http://www.apache.org/dist/helix/KEYS";>KEYS</a> as well as the <tt>*.asc</tt> signature files for the relevant distribution. Make sure you get these files from the main distribution site, rather than from a mirror. Then verify the signatures using one of the following sets of commands: + + <source>% pgpk -a KEYS +% pgpv downloaded_file.asc</source> + + or<br/> + + <source>% pgp -ka KEYS +% pgp downloaded_file.asc</source> + + or<br/> + + <source>% gpg --import KEYS +% gpg --verify downloaded_file.asc</source> + </p> + <p>Alternatively, you can verify the MD5 signature on the files. A Unix/Linux program called + <code>md5</code> or + <code>md5sum</code> is included in most distributions. It is also available as part of + <a href="http://www.gnu.org/software/textutils/textutils.html";>GNU Textutils</a>. + Windows users can get binary md5 programs from these (and likely other) places: + <ul> + <li> + <a href="http://www.md5summer.org/";>http://www.md5summer.org/</a> + </li> + <li> + <a href="http://www.fourmilab.ch/md5/";>http://www.fourmilab.ch/md5/</a> + </li> + <li> + <a href="http://www.pc-tools.net/win32/md5sums/";>http://www.pc-tools.net/win32/md5sums/</a> + </li> + </ul> + </p> + </section> + </body> +</document> http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.6/src/test/conf/testng.xml ---------------------------------------------------------------------- diff --git a/website/0.6.6/src/test/conf/testng.xml b/website/0.6.6/src/test/conf/testng.xml new file mode 100644 index 0000000..58f0803 --- /dev/null +++ b/website/0.6.6/src/test/conf/testng.xml @@ -0,0 +1,27 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- +Licensed to the Apache Software Foundation (ASF) under one +or more contributor license agreements. See the NOTICE file +distributed with this work for additional information +regarding copyright ownership. The ASF licenses this file +to you under the Apache License, Version 2.0 (the +"License"); you may not use this file except in compliance +with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, +software distributed under the License is distributed on an +"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied. See the License for the +specific language governing permissions and limitations +under the License. +--> +<!DOCTYPE suite SYSTEM "http://testng.org/testng-1.0.dtd";> +<suite name="Suite" parallel="none"> + <test name="Test" preserve-order="false"> + <packages> + <package name="org.apache.helix"/> + </packages> + </test> +</suite> http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.7/pom.xml ---------------------------------------------------------------------- diff --git a/website/0.6.7/pom.xml b/website/0.6.7/pom.xml new file mode 100644 index 0000000..c0654dc --- /dev/null +++ b/website/0.6.7/pom.xml @@ -0,0 +1,51 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<!-- +Licensed to the Apache Software Foundation (ASF) under one +or more contributor license agreements. See the NOTICE file +distributed with this work for additional information +regarding copyright ownership. The ASF licenses this file +to you under the Apache License, Version 2.0 (the +"License"); you may not use this file except in compliance +with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, +software distributed under the License is distributed on an +"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied. See the License for the +specific language governing permissions and limitations +under the License. +--> +<project xmlns="http://maven.apache.org/POM/4.0.0"; xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd";> + <modelVersion>4.0.0</modelVersion> + + <parent> + <groupId>org.apache.helix</groupId> + <artifactId>website</artifactId> + <version>0.7.2-SNAPSHOT</version> + </parent> + + <artifactId>0.6.7-docs</artifactId> + <packaging>bundle</packaging> + <name>Apache Helix :: Website :: 0.6.7</name> + + <properties> + </properties> + + <dependencies> + <dependency> + <groupId>org.testng</groupId> + <artifactId>testng</artifactId> + <version>6.0.1</version> + </dependency> + </dependencies> + <build> + <pluginManagement> + <plugins> + </plugins> + </pluginManagement> + <plugins> + </plugins> + </build> +</project> http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.7/src/site/apt/privacy-policy.apt ---------------------------------------------------------------------- diff --git a/website/0.6.7/src/site/apt/privacy-policy.apt b/website/0.6.7/src/site/apt/privacy-policy.apt new file mode 100644 index 0000000..ada9363 --- /dev/null +++ b/website/0.6.7/src/site/apt/privacy-policy.apt @@ -0,0 +1,52 @@ + ---- + Privacy Policy + ----- + Olivier Lamy + ----- + 2013-02-04 + ----- + +~~ Licensed to the Apache Software Foundation (ASF) under one +~~ or more contributor license agreements. See the NOTICE file +~~ distributed with this work for additional information +~~ regarding copyright ownership. The ASF licenses this file +~~ to you under the Apache License, Version 2.0 (the +~~ "License"); you may not use this file except in compliance +~~ with the License. You may obtain a copy of the License at +~~ +~~ http://www.apache.org/licenses/LICENSE-2.0 +~~ +~~ Unless required by applicable law or agreed to in writing, +~~ software distributed under the License is distributed on an +~~ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +~~ KIND, either express or implied. See the License for the +~~ specific language governing permissions and limitations +~~ under the License. + +Privacy Policy + + Information about your use of this website is collected using server access logs and a tracking cookie. The + collected information consists of the following: + + [[1]] The IP address from which you access the website; + + [[2]] The type of browser and operating system you use to access our site; + + [[3]] The date and time you access our site; + + [[4]] The pages you visit; and + + [[5]] The addresses of pages from where you followed a link to our site. + + [] + + Part of this information is gathered using a tracking cookie set by the + {{{http://www.google.com/analytics/}Google Analytics}} service and handled by Google as described in their + {{{http://www.google.com/privacy.html}privacy policy}}. See your browser documentation for instructions on how to + disable the cookie if you prefer not to share this data with Google. + + We use the gathered information to help us make our site more useful to visitors and to better understand how and + when our site is used. We do not track or collect personally identifiable information or associate gathered data + with any personally identifying information from other sources. + + By using this website, you consent to the collection of this data in the manner and for the purpose described above. http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.7/src/site/apt/releasenotes/release-0.6.7.apt ---------------------------------------------------------------------- diff --git a/website/0.6.7/src/site/apt/releasenotes/release-0.6.7.apt b/website/0.6.7/src/site/apt/releasenotes/release-0.6.7.apt new file mode 100644 index 0000000..f6e9d06 --- /dev/null +++ b/website/0.6.7/src/site/apt/releasenotes/release-0.6.7.apt @@ -0,0 +1,76 @@ + ----- + Release Notes for Apache Helix 0.6.7 + ----- + +~~ Licensed to the Apache Software Foundation (ASF) under one +~~ or more contributor license agreements. See the NOTICE file +~~ distributed with this work for additional information +~~ regarding copyright ownership. The ASF licenses this file +~~ to you under the Apache License, Version 2.0 (the +~~ "License"); you may not use this file except in compliance +~~ with the License. You may obtain a copy of the License at +~~ +~~ http://www.apache.org/licenses/LICENSE-2.0 +~~ +~~ Unless required by applicable law or agreed to in writing, +~~ software distributed under the License is distributed on an +~~ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +~~ KIND, either express or implied. See the License for the +~~ specific language governing permissions and limitations +~~ under the License. + +~~ NOTE: For help with the syntax of this file, see: +~~ http://maven.apache.org/guides/mini/guide-apt-format.html + +Release Notes for Apache Helix 0.6.7 + + The Apache Helix team would like to announce the release of Apache Helix 0.6.7. + + This is the tenth release under the Apache umbrella, and the sixth as a top-level project. + + Helix is a generic cluster management framework used for the automatic management of partitioned, replicated and distributed resources hosted on a cluster of nodes. Helix provides the following features: + + * Automatic assignment of resource/partition to nodes + + * Node failure detection and recovery + + * Dynamic addition of Resources + + * Dynamic addition of nodes to the cluster + + * Pluggable distributed state machine to manage the state of a resource via state transitions + + * Automatic load balancing and throttling of transitions + +[] + +* Detailed Changes + +** Bug + + * [HELIX-649] Fix StateModelDef name is not consistent. + + * [HELIX-646] DeleteJob from a recurrent job queue should not throw exception if last scheduled queue not exist. + + * [HELIX-645] Fix Task State Model INIT priority number. + + * [HELIX-642] Disable the participant instance once it disconnected due to unstable ZK. + + +** Improvement + + * [HELIX-651] Add a method in HelixAdmin to set the InstanceConfig of an existing instance. + + * [HELIX-650] Add StateTransitionConfig and Expose API add state transition timeout. + + * [HELIX-648] Extend WorkflowConfig and JobConfig to ResourceConfig. + + * [HELIX-644] Add accessor method for getting zkSerializer from ZkClient. + + * [HELIX-641] Add total message recevied for each instance + +[] + +Cheers, +-- +The Apache Helix Team http://git-wip-us.apache.org/repos/asf/helix/blob/39e0d3fb/website/0.6.7/src/site/markdown/Building.md ---------------------------------------------------------------------- diff --git a/website/0.6.7/src/site/markdown/Building.md b/website/0.6.7/src/site/markdown/Building.md new file mode 100644 index 0000000..af4f3fc --- /dev/null +++ b/website/0.6.7/src/site/markdown/Building.md @@ -0,0 +1,42 @@ +<!--- +Licensed to the Apache Software Foundation (ASF) under one +or more contributor license agreements. See the NOTICE file +distributed with this work for additional information +regarding copyright ownership. The ASF licenses this file +to you under the Apache License, Version 2.0 (the +"License"); you may not use this file except in compliance +with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, +software distributed under the License is distributed on an +"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied. See the License for the +specific language governing permissions and limitations +under the License. +--> + +Build Instructions +------------------ + +### From Source + +Requirements: JDK 1.6+, Maven 2.0.8+ + +``` +git clone https://git-wip-us.apache.org/repos/asf/helix.git +cd helix +git checkout tags/helix-0.6.7 +mvn install package -DskipTests +``` + +### Maven Dependency + +``` +<dependency> + <groupId>org.apache.helix</groupId> + <artifactId>helix-core</artifactId> + <version>0.6.7</version> +</dependency> +```
