rlevano77 opened a new issue, #29:
URL: https://github.com/apache/mynewt-mcumgr-cli/issues/29
I am trying to setup the zephyr samples/subsys/mgmt/mcumgr/smp_svr using UDP
I am using Windows 11 and Golang v1.18.4
After I added mcuboot to my atsame54_xpro board.
I built the smp_svr with UDP support using :
`west build -p auto -b myboard -d build-signed --
-DCONFIG_MCUBOOT_SIGNATURE_KEY_FILE=\"bootloader/mcuboot/root-rsa-2048.pem\"
-DOVERLAY_CONFIG=overlay-udp.conf`
mcuboot reconigze the image :
Booting Zephyr OS build zephyr-v3.1.0-812-g88ca3aca98c0
I: Starting bootloader
I: Primary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
I: Scratch: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
I: Boot source: primary slot
I: Swap type: none
I: Bootloader chainload address offset: 0x10000
I: Jumping to the first image slot
[00:00:00.255,000] <err> mdio_sam: transfer timedout MDIO
[00:00:00.510,000] <err> mdio_sam: transfer timedout MDIO
[00:00:00.765,000] <err> mdio_sam: transfer timedout MDIO
Booting Zephyr OS build zephyr-v3.1.0-812-g88ca3aca98c0
[00:00:01.020,000] <err> mdio_sam: transfer timedout MDIO
[00:00:01.020,000] <inf> eth_sam: MAC: 02:04:25:4b:d0:b9
[00:00:01.020,000] <inf> eth_sam: Queue 0 activated
[00:00:06.069,000] <inf> phy_mii: PHY (0) Link speed 100 Mb, full duplex
[00:00:06.069,000] <inf> eth_sam: Link up
[00:00:06.070,000] <inf> smp_udp_sample: Network connected
[00:00:06.070,000] <inf> smp_sample: build time: Jul 20 2022 06:19:25
[00:00:06.070,000] <inf> smp_udp: Started (IPv4)
I tested the udp connection and works ok :
`$ mcumgr --conntype udp --connstring=[192.168.1.71]:1337 echo hello
hello
$ mcumgr --conntype udp --connstring=[192.168.1.71]:1337 image list
Images:
image=0 slot=0
version: 0.0.0
bootable: true
flags: active confirmed
hash: 5fbc81f7d0f5e5de22f254746bc977ce8836bf364e576f4f03c418bd1451679c
Split status: N/A (0)`
But when I try to upload an image I only see
$ mcumgr --conntype udp --connstring=[192.168.1.71]:1337 image upload
build-signed/zephyr/zephyr.signed.bin
0 B / 71.88 KiB
[------------------------------------------------------------------------------------------------------------------------------------------------------------]
0.00%
and nothing uploads.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: commits-unsubscr...@mynewt.apache.org.apache.org
For queries about this service, please contact Infrastructure at:
us...@infra.apache.org
