http://git-wip-us.apache.org/repos/asf/incubator-mynewt-larva/blob/826d3a57/hw/mcu/nordic/nrf51xxx/include/mcu/nrf51_bitfields.h ---------------------------------------------------------------------- diff --git a/hw/mcu/nordic/nrf51xxx/include/mcu/nrf51_bitfields.h b/hw/mcu/nordic/nrf51xxx/include/mcu/nrf51_bitfields.h new file mode 100755 index 0000000..677b7b1 --- /dev/null +++ b/hw/mcu/nordic/nrf51xxx/include/mcu/nrf51_bitfields.h @@ -0,0 +1,6894 @@ +/** + * Copyright (c) 2016 Runtime Inc. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/* Copyright (c) 2015, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * * Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef __NRF51_BITS_H +#define __NRF51_BITS_H + +/*lint ++flb "Enter library region" */ + +/* Peripheral: AAR */ +/* Description: Accelerated Address Resolver. */ + +/* Register: AAR_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on NOTRESOLVED event. */ +#define AAR_INTENSET_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ +#define AAR_INTENSET_NOTRESOLVED_Msk (0x1UL << AAR_INTENSET_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ +#define AAR_INTENSET_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_NOTRESOLVED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on RESOLVED event. */ +#define AAR_INTENSET_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ +#define AAR_INTENSET_RESOLVED_Msk (0x1UL << AAR_INTENSET_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ +#define AAR_INTENSET_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_RESOLVED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on END event. */ +#define AAR_INTENSET_END_Pos (0UL) /*!< Position of END field. */ +#define AAR_INTENSET_END_Msk (0x1UL << AAR_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define AAR_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: AAR_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on NOTRESOLVED event. */ +#define AAR_INTENCLR_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ +#define AAR_INTENCLR_NOTRESOLVED_Msk (0x1UL << AAR_INTENCLR_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ +#define AAR_INTENCLR_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_NOTRESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on RESOLVED event. */ +#define AAR_INTENCLR_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ +#define AAR_INTENCLR_RESOLVED_Msk (0x1UL << AAR_INTENCLR_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ +#define AAR_INTENCLR_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_RESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDKSGEN event. */ +#define AAR_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ +#define AAR_INTENCLR_END_Msk (0x1UL << AAR_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define AAR_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: AAR_STATUS */ +/* Description: Resolution status. */ + +/* Bits 3..0 : The IRK used last time an address was resolved. */ +#define AAR_STATUS_STATUS_Pos (0UL) /*!< Position of STATUS field. */ +#define AAR_STATUS_STATUS_Msk (0xFUL << AAR_STATUS_STATUS_Pos) /*!< Bit mask of STATUS field. */ + +/* Register: AAR_ENABLE */ +/* Description: Enable AAR. */ + +/* Bits 1..0 : Enable AAR. */ +#define AAR_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define AAR_ENABLE_ENABLE_Msk (0x3UL << AAR_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define AAR_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled AAR. */ +#define AAR_ENABLE_ENABLE_Enabled (0x03UL) /*!< Enable AAR. */ + +/* Register: AAR_NIRK */ +/* Description: Number of Identity root Keys in the IRK data structure. */ + +/* Bits 4..0 : Number of Identity root Keys in the IRK data structure. */ +#define AAR_NIRK_NIRK_Pos (0UL) /*!< Position of NIRK field. */ +#define AAR_NIRK_NIRK_Msk (0x1FUL << AAR_NIRK_NIRK_Pos) /*!< Bit mask of NIRK field. */ + +/* Register: AAR_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define AAR_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define AAR_POWER_POWER_Msk (0x1UL << AAR_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define AAR_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define AAR_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: ADC */ +/* Description: Analog to digital converter. */ + +/* Register: ADC_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 0 : Enable interrupt on END event. */ +#define ADC_INTENSET_END_Pos (0UL) /*!< Position of END field. */ +#define ADC_INTENSET_END_Msk (0x1UL << ADC_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define ADC_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define ADC_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define ADC_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: ADC_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 0 : Disable interrupt on END event. */ +#define ADC_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ +#define ADC_INTENCLR_END_Msk (0x1UL << ADC_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define ADC_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define ADC_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define ADC_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: ADC_BUSY */ +/* Description: ADC busy register. */ + +/* Bit 0 : ADC busy register. */ +#define ADC_BUSY_BUSY_Pos (0UL) /*!< Position of BUSY field. */ +#define ADC_BUSY_BUSY_Msk (0x1UL << ADC_BUSY_BUSY_Pos) /*!< Bit mask of BUSY field. */ +#define ADC_BUSY_BUSY_Ready (0UL) /*!< No ongoing ADC conversion is taking place. ADC is ready. */ +#define ADC_BUSY_BUSY_Busy (1UL) /*!< An ADC conversion is taking place. ADC is busy. */ + +/* Register: ADC_ENABLE */ +/* Description: ADC enable. */ + +/* Bits 1..0 : ADC enable. */ +#define ADC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define ADC_ENABLE_ENABLE_Msk (0x3UL << ADC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define ADC_ENABLE_ENABLE_Disabled (0x00UL) /*!< ADC is disabled. */ +#define ADC_ENABLE_ENABLE_Enabled (0x01UL) /*!< ADC is enabled. If an analog input pin is selected as source of the conversion, the selected pin is configured as an analog input. */ + +/* Register: ADC_CONFIG */ +/* Description: ADC configuration register. */ + +/* Bits 17..16 : ADC external reference pin selection. */ +#define ADC_CONFIG_EXTREFSEL_Pos (16UL) /*!< Position of EXTREFSEL field. */ +#define ADC_CONFIG_EXTREFSEL_Msk (0x3UL << ADC_CONFIG_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ +#define ADC_CONFIG_EXTREFSEL_None (0UL) /*!< Analog external reference inputs disabled. */ +#define ADC_CONFIG_EXTREFSEL_AnalogReference0 (1UL) /*!< Use analog reference 0 as reference. */ +#define ADC_CONFIG_EXTREFSEL_AnalogReference1 (2UL) /*!< Use analog reference 1 as reference. */ + +/* Bits 15..8 : ADC analog pin selection. */ +#define ADC_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ +#define ADC_CONFIG_PSEL_Msk (0xFFUL << ADC_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ +#define ADC_CONFIG_PSEL_Disabled (0UL) /*!< Analog input pins disabled. */ +#define ADC_CONFIG_PSEL_AnalogInput0 (1UL) /*!< Use analog input 0 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput1 (2UL) /*!< Use analog input 1 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput2 (4UL) /*!< Use analog input 2 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput3 (8UL) /*!< Use analog input 3 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput4 (16UL) /*!< Use analog input 4 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput5 (32UL) /*!< Use analog input 5 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput6 (64UL) /*!< Use analog input 6 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput7 (128UL) /*!< Use analog input 7 as analog input. */ + +/* Bits 6..5 : ADC reference selection. */ +#define ADC_CONFIG_REFSEL_Pos (5UL) /*!< Position of REFSEL field. */ +#define ADC_CONFIG_REFSEL_Msk (0x3UL << ADC_CONFIG_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ +#define ADC_CONFIG_REFSEL_VBG (0x00UL) /*!< Use internal 1.2V bandgap voltage as reference for conversion. */ +#define ADC_CONFIG_REFSEL_External (0x01UL) /*!< Use external source configured by EXTREFSEL as reference for conversion. */ +#define ADC_CONFIG_REFSEL_SupplyOneHalfPrescaling (0x02UL) /*!< Use supply voltage with 1/2 prescaling as reference for conversion. Only usable when supply voltage is between 1.7V and 2.6V. */ +#define ADC_CONFIG_REFSEL_SupplyOneThirdPrescaling (0x03UL) /*!< Use supply voltage with 1/3 prescaling as reference for conversion. Only usable when supply voltage is between 2.5V and 3.6V. */ + +/* Bits 4..2 : ADC input selection. */ +#define ADC_CONFIG_INPSEL_Pos (2UL) /*!< Position of INPSEL field. */ +#define ADC_CONFIG_INPSEL_Msk (0x7UL << ADC_CONFIG_INPSEL_Pos) /*!< Bit mask of INPSEL field. */ +#define ADC_CONFIG_INPSEL_AnalogInputNoPrescaling (0x00UL) /*!< Analog input specified by PSEL with no prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_AnalogInputTwoThirdsPrescaling (0x01UL) /*!< Analog input specified by PSEL with 2/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling (0x02UL) /*!< Analog input specified by PSEL with 1/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_SupplyTwoThirdsPrescaling (0x05UL) /*!< Supply voltage with 2/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_SupplyOneThirdPrescaling (0x06UL) /*!< Supply voltage with 1/3 prescaling used as input for the conversion. */ + +/* Bits 1..0 : ADC resolution. */ +#define ADC_CONFIG_RES_Pos (0UL) /*!< Position of RES field. */ +#define ADC_CONFIG_RES_Msk (0x3UL << ADC_CONFIG_RES_Pos) /*!< Bit mask of RES field. */ +#define ADC_CONFIG_RES_8bit (0x00UL) /*!< 8bit ADC resolution. */ +#define ADC_CONFIG_RES_9bit (0x01UL) /*!< 9bit ADC resolution. */ +#define ADC_CONFIG_RES_10bit (0x02UL) /*!< 10bit ADC resolution. */ + +/* Register: ADC_RESULT */ +/* Description: Result of ADC conversion. */ + +/* Bits 9..0 : Result of ADC conversion. */ +#define ADC_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ +#define ADC_RESULT_RESULT_Msk (0x3FFUL << ADC_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ + +/* Register: ADC_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define ADC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define ADC_POWER_POWER_Msk (0x1UL << ADC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define ADC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define ADC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: AMLI */ +/* Description: AHB Multi-Layer Interface. */ + +/* Register: AMLI_RAMPRI_CPU0 */ +/* Description: Configurable priority configuration register for CPU0. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_CPU0_RAM7_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_CPU0_RAM6_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_CPU0_RAM5_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_CPU0_RAM4_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_CPU0_RAM3_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_CPU0_RAM2_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_CPU0_RAM1_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_CPU0_RAM0_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_SPIS1 */ +/* Description: Configurable priority configuration register for SPIS1. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_RADIO */ +/* Description: Configurable priority configuration register for RADIO. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_RADIO_RAM7_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_RADIO_RAM6_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_RADIO_RAM5_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_RADIO_RAM4_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_RADIO_RAM3_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_RADIO_RAM2_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_RADIO_RAM1_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_RADIO_RAM0_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_ECB */ +/* Description: Configurable priority configuration register for ECB. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_ECB_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_ECB_RAM7_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_ECB_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_ECB_RAM6_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_ECB_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_ECB_RAM5_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_ECB_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_ECB_RAM4_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_ECB_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_ECB_RAM3_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_ECB_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_ECB_RAM2_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_ECB_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_ECB_RAM1_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_ECB_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_ECB_RAM0_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_CCM */ +/* Description: Configurable priority configuration register for CCM. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_CCM_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_CCM_RAM7_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_CCM_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_CCM_RAM6_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_CCM_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_CCM_RAM5_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_CCM_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_CCM_RAM4_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_CCM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_CCM_RAM3_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_CCM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_CCM_RAM2_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_CCM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_CCM_RAM1_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_CCM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_CCM_RAM0_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_AAR */ +/* Description: Configurable priority configuration register for AAR. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_AAR_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_AAR_RAM7_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_AAR_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_AAR_RAM6_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_AAR_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_AAR_RAM5_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_AAR_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_AAR_RAM4_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_AAR_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_AAR_RAM3_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_AAR_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_AAR_RAM2_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_AAR_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_AAR_RAM1_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_AAR_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_AAR_RAM0_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + + +/* Peripheral: CCM */ +/* Description: AES CCM Mode Encryption. */ + +/* Register: CCM_SHORTS */ +/* Description: Shortcuts for the CCM. */ + +/* Bit 0 : Shortcut between ENDKSGEN event and CRYPT task. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Pos (0UL) /*!< Position of ENDKSGEN_CRYPT field. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Msk (0x1UL << CCM_SHORTS_ENDKSGEN_CRYPT_Pos) /*!< Bit mask of ENDKSGEN_CRYPT field. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Disabled (0UL) /*!< Shortcut disabled. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: CCM_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on ERROR event. */ +#define CCM_INTENSET_ERROR_Pos (2UL) /*!< Position of ERROR field. */ +#define CCM_INTENSET_ERROR_Msk (0x1UL << CCM_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define CCM_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on ENDCRYPT event. */ +#define CCM_INTENSET_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ +#define CCM_INTENSET_ENDCRYPT_Msk (0x1UL << CCM_INTENSET_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ +#define CCM_INTENSET_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ENDCRYPT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on ENDKSGEN event. */ +#define CCM_INTENSET_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ +#define CCM_INTENSET_ENDKSGEN_Msk (0x1UL << CCM_INTENSET_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ +#define CCM_INTENSET_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ENDKSGEN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: CCM_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on ERROR event. */ +#define CCM_INTENCLR_ERROR_Pos (2UL) /*!< Position of ERROR field. */ +#define CCM_INTENCLR_ERROR_Msk (0x1UL << CCM_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define CCM_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on ENDCRYPT event. */ +#define CCM_INTENCLR_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ +#define CCM_INTENCLR_ENDCRYPT_Msk (0x1UL << CCM_INTENCLR_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ +#define CCM_INTENCLR_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ENDCRYPT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDKSGEN event. */ +#define CCM_INTENCLR_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ +#define CCM_INTENCLR_ENDKSGEN_Msk (0x1UL << CCM_INTENCLR_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ +#define CCM_INTENCLR_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ENDKSGEN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: CCM_MICSTATUS */ +/* Description: CCM RX MIC check result. */ + +/* Bit 0 : Result of the MIC check performed during the previous CCM RX STARTCRYPT */ +#define CCM_MICSTATUS_MICSTATUS_Pos (0UL) /*!< Position of MICSTATUS field. */ +#define CCM_MICSTATUS_MICSTATUS_Msk (0x1UL << CCM_MICSTATUS_MICSTATUS_Pos) /*!< Bit mask of MICSTATUS field. */ +#define CCM_MICSTATUS_MICSTATUS_CheckFailed (0UL) /*!< MIC check failed. */ +#define CCM_MICSTATUS_MICSTATUS_CheckPassed (1UL) /*!< MIC check passed. */ + +/* Register: CCM_ENABLE */ +/* Description: CCM enable. */ + +/* Bits 1..0 : CCM enable. */ +#define CCM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define CCM_ENABLE_ENABLE_Msk (0x3UL << CCM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define CCM_ENABLE_ENABLE_Disabled (0x00UL) /*!< CCM is disabled. */ +#define CCM_ENABLE_ENABLE_Enabled (0x02UL) /*!< CCM is enabled. */ + +/* Register: CCM_MODE */ +/* Description: Operation mode. */ + +/* Bit 0 : CCM mode operation. */ +#define CCM_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define CCM_MODE_MODE_Msk (0x1UL << CCM_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ +#define CCM_MODE_MODE_Encryption (0UL) /*!< CCM mode TX */ +#define CCM_MODE_MODE_Decryption (1UL) /*!< CCM mode TX */ + +/* Register: CCM_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define CCM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define CCM_POWER_POWER_Msk (0x1UL << CCM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define CCM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define CCM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: CLOCK */ +/* Description: Clock control. */ + +/* Register: CLOCK_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 4 : Enable interrupt on CTTO event. */ +#define CLOCK_INTENSET_CTTO_Pos (4UL) /*!< Position of CTTO field. */ +#define CLOCK_INTENSET_CTTO_Msk (0x1UL << CLOCK_INTENSET_CTTO_Pos) /*!< Bit mask of CTTO field. */ +#define CLOCK_INTENSET_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_CTTO_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 3 : Enable interrupt on DONE event. */ +#define CLOCK_INTENSET_DONE_Pos (3UL) /*!< Position of DONE field. */ +#define CLOCK_INTENSET_DONE_Msk (0x1UL << CLOCK_INTENSET_DONE_Pos) /*!< Bit mask of DONE field. */ +#define CLOCK_INTENSET_DONE_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_DONE_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_DONE_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on LFCLKSTARTED event. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on HFCLKSTARTED event. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: CLOCK_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 4 : Disable interrupt on CTTO event. */ +#define CLOCK_INTENCLR_CTTO_Pos (4UL) /*!< Position of CTTO field. */ +#define CLOCK_INTENCLR_CTTO_Msk (0x1UL << CLOCK_INTENCLR_CTTO_Pos) /*!< Bit mask of CTTO field. */ +#define CLOCK_INTENCLR_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_CTTO_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 3 : Disable interrupt on DONE event. */ +#define CLOCK_INTENCLR_DONE_Pos (3UL) /*!< Position of DONE field. */ +#define CLOCK_INTENCLR_DONE_Msk (0x1UL << CLOCK_INTENCLR_DONE_Pos) /*!< Bit mask of DONE field. */ +#define CLOCK_INTENCLR_DONE_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_DONE_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_DONE_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on LFCLKSTARTED event. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on HFCLKSTARTED event. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: CLOCK_HFCLKRUN */ +/* Description: Task HFCLKSTART trigger status. */ + +/* Bit 0 : Task HFCLKSTART trigger status. */ +#define CLOCK_HFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */ +#define CLOCK_HFCLKRUN_STATUS_Msk (0x1UL << CLOCK_HFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */ +#define CLOCK_HFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task HFCLKSTART has not been triggered. */ +#define CLOCK_HFCLKRUN_STATUS_Triggered (1UL) /*!< Task HFCLKSTART has been triggered. */ + +/* Register: CLOCK_HFCLKSTAT */ +/* Description: High frequency clock status. */ + +/* Bit 16 : State for the HFCLK. */ +#define CLOCK_HFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ +#define CLOCK_HFCLKSTAT_STATE_Msk (0x1UL << CLOCK_HFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ +#define CLOCK_HFCLKSTAT_STATE_NotRunning (0UL) /*!< HFCLK clock not running. */ +#define CLOCK_HFCLKSTAT_STATE_Running (1UL) /*!< HFCLK clock running. */ + +/* Bit 0 : Active clock source for the HF clock. */ +#define CLOCK_HFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_HFCLKSTAT_SRC_Msk (0x1UL << CLOCK_HFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_HFCLKSTAT_SRC_RC (0UL) /*!< Internal 16MHz RC oscillator running and generating the HFCLK clock. */ +#define CLOCK_HFCLKSTAT_SRC_Xtal (1UL) /*!< External 16MHz/32MHz crystal oscillator running and generating the HFCLK clock. */ + +/* Register: CLOCK_LFCLKRUN */ +/* Description: Task LFCLKSTART triggered status. */ + +/* Bit 0 : Task LFCLKSTART triggered status. */ +#define CLOCK_LFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */ +#define CLOCK_LFCLKRUN_STATUS_Msk (0x1UL << CLOCK_LFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */ +#define CLOCK_LFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task LFCLKSTART has not been triggered. */ +#define CLOCK_LFCLKRUN_STATUS_Triggered (1UL) /*!< Task LFCLKSTART has been triggered. */ + +/* Register: CLOCK_LFCLKSTAT */ +/* Description: Low frequency clock status. */ + +/* Bit 16 : State for the LF clock. */ +#define CLOCK_LFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ +#define CLOCK_LFCLKSTAT_STATE_Msk (0x1UL << CLOCK_LFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ +#define CLOCK_LFCLKSTAT_STATE_NotRunning (0UL) /*!< LFCLK clock not running. */ +#define CLOCK_LFCLKSTAT_STATE_Running (1UL) /*!< LFCLK clock running. */ + +/* Bits 1..0 : Active clock source for the LF clock. */ +#define CLOCK_LFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_LFCLKSTAT_SRC_Msk (0x3UL << CLOCK_LFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_LFCLKSTAT_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator running and generating the LFCLK clock. */ +#define CLOCK_LFCLKSTAT_SRC_Xtal (1UL) /*!< External 32KiHz crystal oscillator running and generating the LFCLK clock. */ +#define CLOCK_LFCLKSTAT_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from the HFCLK running and generating the LFCLK clock. */ + +/* Register: CLOCK_LFCLKSRCCOPY */ +/* Description: Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ + +/* Bits 1..0 : Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ +#define CLOCK_LFCLKSRCCOPY_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_LFCLKSRCCOPY_SRC_Msk (0x3UL << CLOCK_LFCLKSRCCOPY_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_LFCLKSRCCOPY_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ +#define CLOCK_LFCLKSRCCOPY_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ +#define CLOCK_LFCLKSRCCOPY_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ + +/* Register: CLOCK_LFCLKSRC */ +/* Description: Clock source for the LFCLK clock. */ + +/* Bits 1..0 : Clock source. */ +#define CLOCK_LFCLKSRC_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_LFCLKSRC_SRC_Msk (0x3UL << CLOCK_LFCLKSRC_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_LFCLKSRC_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ +#define CLOCK_LFCLKSRC_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ +#define CLOCK_LFCLKSRC_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ + +/* Register: CLOCK_CTIV */ +/* Description: Calibration timer interval. */ + +/* Bits 6..0 : Calibration timer interval in 0.25s resolution. */ +#define CLOCK_CTIV_CTIV_Pos (0UL) /*!< Position of CTIV field. */ +#define CLOCK_CTIV_CTIV_Msk (0x7FUL << CLOCK_CTIV_CTIV_Pos) /*!< Bit mask of CTIV field. */ + +/* Register: CLOCK_XTALFREQ */ +/* Description: Crystal frequency. */ + +/* Bits 7..0 : External Xtal frequency selection. */ +#define CLOCK_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ +#define CLOCK_XTALFREQ_XTALFREQ_Msk (0xFFUL << CLOCK_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ +#define CLOCK_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz xtal is used as source for the HFCLK oscillator. */ +#define CLOCK_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz xtal is used as source for the HFCLK oscillator. */ + + +/* Peripheral: ECB */ +/* Description: AES ECB Mode Encryption. */ + +/* Register: ECB_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 1 : Enable interrupt on ERRORECB event. */ +#define ECB_INTENSET_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ +#define ECB_INTENSET_ERRORECB_Msk (0x1UL << ECB_INTENSET_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ +#define ECB_INTENSET_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENSET_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENSET_ERRORECB_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on ENDECB event. */ +#define ECB_INTENSET_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ +#define ECB_INTENSET_ENDECB_Msk (0x1UL << ECB_INTENSET_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ +#define ECB_INTENSET_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENSET_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENSET_ENDECB_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: ECB_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 1 : Disable interrupt on ERRORECB event. */ +#define ECB_INTENCLR_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ +#define ECB_INTENCLR_ERRORECB_Msk (0x1UL << ECB_INTENCLR_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ +#define ECB_INTENCLR_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENCLR_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENCLR_ERRORECB_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDECB event. */ +#define ECB_INTENCLR_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ +#define ECB_INTENCLR_ENDECB_Msk (0x1UL << ECB_INTENCLR_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ +#define ECB_INTENCLR_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENCLR_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENCLR_ENDECB_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: ECB_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define ECB_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define ECB_POWER_POWER_Msk (0x1UL << ECB_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define ECB_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define ECB_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: FICR */ +/* Description: Factory Information Configuration. */ + +/* Register: FICR_PPFC */ +/* Description: Pre-programmed factory code present. */ + +/* Bits 7..0 : Pre-programmed factory code present. */ +#define FICR_PPFC_PPFC_Pos (0UL) /*!< Position of PPFC field. */ +#define FICR_PPFC_PPFC_Msk (0xFFUL << FICR_PPFC_PPFC_Pos) /*!< Bit mask of PPFC field. */ +#define FICR_PPFC_PPFC_Present (0x00UL) /*!< Present. */ +#define FICR_PPFC_PPFC_NotPresent (0xFFUL) /*!< Not present. */ + +/* Register: FICR_CONFIGID */ +/* Description: Configuration identifier. */ + +/* Bits 31..16 : Firmware Identification Number pre-loaded into the flash. */ +#define FICR_CONFIGID_FWID_Pos (16UL) /*!< Position of FWID field. */ +#define FICR_CONFIGID_FWID_Msk (0xFFFFUL << FICR_CONFIGID_FWID_Pos) /*!< Bit mask of FWID field. */ + +/* Bits 15..0 : Hardware Identification Number. */ +#define FICR_CONFIGID_HWID_Pos (0UL) /*!< Position of HWID field. */ +#define FICR_CONFIGID_HWID_Msk (0xFFFFUL << FICR_CONFIGID_HWID_Pos) /*!< Bit mask of HWID field. */ + +/* Register: FICR_DEVICEADDRTYPE */ +/* Description: Device address type. */ + +/* Bit 0 : Device address type. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos (0UL) /*!< Position of DEVICEADDRTYPE field. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Msk (0x1UL << FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos) /*!< Bit mask of DEVICEADDRTYPE field. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Public (0UL) /*!< Public address. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Random (1UL) /*!< Random address. */ + +/* Register: FICR_OVERRIDEEN */ +/* Description: Radio calibration override enable. */ + +/* Bit 3 : Override default values for BLE_1Mbit mode. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Pos (3UL) /*!< Position of BLE_1MBIT field. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_BLE_1MBIT_Pos) /*!< Bit mask of BLE_1MBIT field. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Override (0UL) /*!< Override the default values for BLE_1Mbit mode. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_NotOverride (1UL) /*!< Do not override the default values for BLE_1Mbit mode. */ + +/* Bit 0 : Override default values for NRF_1Mbit mode. */ +#define FICR_OVERRIDEEN_NRF_1MBIT_Pos (0UL) /*!< Position of NRF_1MBIT field. */ +#define FICR_OVERRIDEEN_NRF_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_NRF_1MBIT_Pos) /*!< Bit mask of NRF_1MBIT field. */ +#define FICR_OVERRIDEEN_NRF_1MBIT_Override (0UL) /*!< Override the default values for NRF_1Mbit mode. */ +#define FICR_OVERRIDEEN_NRF_1MBIT_NotOverride (1UL) /*!< Do not override the default values for NRF_1Mbit mode. */ + + +/* Peripheral: GPIO */ +/* Description: General purpose input and output. */ + +/* Register: GPIO_OUT */ +/* Description: Write GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_OUT_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_OUT_PIN31_Msk (0x1UL << GPIO_OUT_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_OUT_PIN31_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_OUT_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_OUT_PIN30_Msk (0x1UL << GPIO_OUT_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_OUT_PIN30_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_OUT_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_OUT_PIN29_Msk (0x1UL << GPIO_OUT_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_OUT_PIN29_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_OUT_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_OUT_PIN28_Msk (0x1UL << GPIO_OUT_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_OUT_PIN28_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_OUT_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_OUT_PIN27_Msk (0x1UL << GPIO_OUT_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_OUT_PIN27_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_OUT_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_OUT_PIN26_Msk (0x1UL << GPIO_OUT_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_OUT_PIN26_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_OUT_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_OUT_PIN25_Msk (0x1UL << GPIO_OUT_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_OUT_PIN25_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_OUT_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_OUT_PIN24_Msk (0x1UL << GPIO_OUT_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_OUT_PIN24_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_OUT_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_OUT_PIN23_Msk (0x1UL << GPIO_OUT_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_OUT_PIN23_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_OUT_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_OUT_PIN22_Msk (0x1UL << GPIO_OUT_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_OUT_PIN22_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_OUT_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_OUT_PIN21_Msk (0x1UL << GPIO_OUT_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_OUT_PIN21_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_OUT_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_OUT_PIN20_Msk (0x1UL << GPIO_OUT_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_OUT_PIN20_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_OUT_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_OUT_PIN19_Msk (0x1UL << GPIO_OUT_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_OUT_PIN19_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_OUT_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_OUT_PIN18_Msk (0x1UL << GPIO_OUT_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_OUT_PIN18_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_OUT_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_OUT_PIN17_Msk (0x1UL << GPIO_OUT_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_OUT_PIN17_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_OUT_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_OUT_PIN16_Msk (0x1UL << GPIO_OUT_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_OUT_PIN16_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_OUT_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_OUT_PIN15_Msk (0x1UL << GPIO_OUT_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_OUT_PIN15_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_OUT_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_OUT_PIN14_Msk (0x1UL << GPIO_OUT_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_OUT_PIN14_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_OUT_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_OUT_PIN13_Msk (0x1UL << GPIO_OUT_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_OUT_PIN13_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_OUT_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_OUT_PIN12_Msk (0x1UL << GPIO_OUT_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_OUT_PIN12_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_OUT_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_OUT_PIN11_Msk (0x1UL << GPIO_OUT_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_OUT_PIN11_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_OUT_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_OUT_PIN10_Msk (0x1UL << GPIO_OUT_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_OUT_PIN10_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_OUT_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_OUT_PIN9_Msk (0x1UL << GPIO_OUT_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_OUT_PIN9_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_OUT_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_OUT_PIN8_Msk (0x1UL << GPIO_OUT_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_OUT_PIN8_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_OUT_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_OUT_PIN7_Msk (0x1UL << GPIO_OUT_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_OUT_PIN7_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_OUT_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_OUT_PIN6_Msk (0x1UL << GPIO_OUT_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_OUT_PIN6_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_OUT_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_OUT_PIN5_Msk (0x1UL << GPIO_OUT_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_OUT_PIN5_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_OUT_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_OUT_PIN4_Msk (0x1UL << GPIO_OUT_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_OUT_PIN4_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_OUT_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_OUT_PIN3_Msk (0x1UL << GPIO_OUT_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_OUT_PIN3_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_OUT_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_OUT_PIN2_Msk (0x1UL << GPIO_OUT_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_OUT_PIN2_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_OUT_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_OUT_PIN1_Msk (0x1UL << GPIO_OUT_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_OUT_PIN1_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_OUT_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_OUT_PIN0_Msk (0x1UL << GPIO_OUT_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_OUT_PIN0_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high. */ + +/* Register: GPIO_OUTSET */ +/* Description: Set individual bits in GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_OUTSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_OUTSET_PIN31_Msk (0x1UL << GPIO_OUTSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_OUTSET_PIN31_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN31_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN31_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_OUTSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_OUTSET_PIN30_Msk (0x1UL << GPIO_OUTSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_OUTSET_PIN30_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN30_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN30_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_OUTSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_OUTSET_PIN29_Msk (0x1UL << GPIO_OUTSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_OUTSET_PIN29_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN29_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN29_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_OUTSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_OUTSET_PIN28_Msk (0x1UL << GPIO_OUTSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_OUTSET_PIN28_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN28_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN28_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_OUTSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_OUTSET_PIN27_Msk (0x1UL << GPIO_OUTSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_OUTSET_PIN27_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN27_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN27_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_OUTSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_OUTSET_PIN26_Msk (0x1UL << GPIO_OUTSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_OUTSET_PIN26_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN26_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN26_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_OUTSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_OUTSET_PIN25_Msk (0x1UL << GPIO_OUTSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_OUTSET_PIN25_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN25_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN25_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_OUTSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_OUTSET_PIN24_Msk (0x1UL << GPIO_OUTSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_OUTSET_PIN24_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN24_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN24_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_OUTSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_OUTSET_PIN23_Msk (0x1UL << GPIO_OUTSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_OUTSET_PIN23_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN23_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN23_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_OUTSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_OUTSET_PIN22_Msk (0x1UL << GPIO_OUTSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_OUTSET_PIN22_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN22_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN22_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_OUTSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_OUTSET_PIN21_Msk (0x1UL << GPIO_OUTSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_OUTSET_PIN21_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN21_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN21_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_OUTSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_OUTSET_PIN20_Msk (0x1UL << GPIO_OUTSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_OUTSET_PIN20_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN20_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN20_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_OUTSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_OUTSET_PIN19_Msk (0x1UL << GPIO_OUTSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_OUTSET_PIN19_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN19_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN19_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_OUTSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_OUTSET_PIN18_Msk (0x1UL << GPIO_OUTSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_OUTSET_PIN18_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN18_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN18_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_OUTSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_OUTSET_PIN17_Msk (0x1UL << GPIO_OUTSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_OUTSET_PIN17_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN17_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN17_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_OUTSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_OUTSET_PIN16_Msk (0x1UL << GPIO_OUTSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_OUTSET_PIN16_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN16_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN16_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_OUTSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_OUTSET_PIN15_Msk (0x1UL << GPIO_OUTSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_OUTSET_PIN15_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN15_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN15_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_OUTSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_OUTSET_PIN14_Msk (0x1UL << GPIO_OUTSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_OUTSET_PIN14_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN14_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN14_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_OUTSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_OUTSET_PIN13_Msk (0x1UL << GPIO_OUTSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_OUTSET_PIN13_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN13_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN13_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_OUTSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_OUTSET_PIN12_Msk (0x1UL << GPIO_OUTSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_OUTSET_PIN12_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN12_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN12_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_OUTSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_OUT
<TRUNCATED>
