http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/35529b95/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_mdios.h ---------------------------------------------------------------------- diff --git a/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_mdios.h b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_mdios.h new file mode 100644 index 0000000..071b033 --- /dev/null +++ b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_mdios.h @@ -0,0 +1,537 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_mdios.h + * @author MCD Application Team + * @version V1.2.0 + * @date 30-December-2016 + * @brief Header file of MDIOS HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_MDIOS_H +#define __STM32F7xx_HAL_MDIOS_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f7xx_hal_def.h" + +#if defined (MDIOS) + +/** @addtogroup STM32F7xx_HAL_Driver + * @{ + */ + +/** @addtogroup MDIOS + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup MDIOS_Exported_Types MDIOS Exported Types + * @{ + */ + +/** @defgroup MDIOS_Exported_Types_Group1 MDIOS State structures definition + * @{ + */ + +typedef enum +{ + HAL_MDIOS_STATE_RESET = 0x00U, /*!< Peripheral not yet Initialized or disabled */ + HAL_MDIOS_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_MDIOS_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ + HAL_MDIOS_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +}HAL_MDIOS_StateTypeDef; + +/** + * @} + */ + +/** @defgroup MDIOS_Exported_Types_Group2 MDIOS Init Structure definition + * @{ + */ + +typedef struct +{ + uint32_t PortAddress; /*!< Specifies the MDIOS port address. + This parameter can be a value from 0 to 31 */ + uint32_t PreambleCheck; /*!< Specifies whether the preamble check is enabled or disabled. + This parameter can be a value of @ref MDIOS_Preamble_Check */ +}MDIOS_InitTypeDef; + +/** + * @} + */ + +/** @defgroup MDIOS_Exported_Types_Group4 MDIOS handle Structure definition + * @{ + */ + +typedef struct +{ + MDIOS_TypeDef *Instance; /*!< Register base address */ + + MDIOS_InitTypeDef Init; /*!< MDIOS Init Structure */ + + __IO HAL_MDIOS_StateTypeDef State; /*!< MDIOS communication state */ + + HAL_LockTypeDef Lock; /*!< MDIOS Lock */ +}MDIOS_HandleTypeDef; + +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup MDIOS_Exported_Constants MDIOS Exported Constants + * @{ + */ + +/** @defgroup MDIOS_Preamble_Check MDIOS Preamble Check + * @{ + */ +#define MDIOS_PREAMBLE_CHECK_ENABLE ((uint32_t)0x00000000U) +#define MDIOS_PREAMBLE_CHECK_DISABLE MDIOS_CR_DPC +/** + * @} + */ + +/** @defgroup MDIOS_Input_Output_Registers_Definitions MDIOS Input Output Registers Definitions + * @{ + */ +#define MDIOS_REG0 ((uint32_t)0x00000000U) +#define MDIOS_REG1 ((uint32_t)0x00000001U) +#define MDIOS_REG2 ((uint32_t)0x00000002U) +#define MDIOS_REG3 ((uint32_t)0x00000003U) +#define MDIOS_REG4 ((uint32_t)0x00000004U) +#define MDIOS_REG5 ((uint32_t)0x00000005U) +#define MDIOS_REG6 ((uint32_t)0x00000006U) +#define MDIOS_REG7 ((uint32_t)0x00000007U) +#define MDIOS_REG8 ((uint32_t)0x00000008U) +#define MDIOS_REG9 ((uint32_t)0x00000009U) +#define MDIOS_REG10 ((uint32_t)0x0000000AU) +#define MDIOS_REG11 ((uint32_t)0x0000000BU) +#define MDIOS_REG12 ((uint32_t)0x0000000CU) +#define MDIOS_REG13 ((uint32_t)0x0000000DU) +#define MDIOS_REG14 ((uint32_t)0x0000000EU) +#define MDIOS_REG15 ((uint32_t)0x0000000FU) +#define MDIOS_REG16 ((uint32_t)0x00000010U) +#define MDIOS_REG17 ((uint32_t)0x00000011U) +#define MDIOS_REG18 ((uint32_t)0x00000012U) +#define MDIOS_REG19 ((uint32_t)0x00000013U) +#define MDIOS_REG20 ((uint32_t)0x00000014U) +#define MDIOS_REG21 ((uint32_t)0x00000015U) +#define MDIOS_REG22 ((uint32_t)0x00000016U) +#define MDIOS_REG23 ((uint32_t)0x00000017U) +#define MDIOS_REG24 ((uint32_t)0x00000018U) +#define MDIOS_REG25 ((uint32_t)0x00000019U) +#define MDIOS_REG26 ((uint32_t)0x0000001AU) +#define MDIOS_REG27 ((uint32_t)0x0000001BU) +#define MDIOS_REG28 ((uint32_t)0x0000001CU) +#define MDIOS_REG29 ((uint32_t)0x0000001DU) +#define MDIOS_REG30 ((uint32_t)0x0000001EU) +#define MDIOS_REG31 ((uint32_t)0x0000001FU) +/** + * @} + */ + +/** @defgroup MDIOS_Registers_Flags MDIOS Registers Flags + * @{ + */ +#define MDIOS_REG0_FLAG ((uint32_t)0x00000001U) +#define MDIOS_REG1_FLAG ((uint32_t)0x00000002U) +#define MDIOS_REG2_FLAG ((uint32_t)0x00000004U) +#define MDIOS_REG3_FLAG ((uint32_t)0x00000008U) +#define MDIOS_REG4_FLAG ((uint32_t)0x00000010U) +#define MDIOS_REG5_FLAG ((uint32_t)0x00000020U) +#define MDIOS_REG6_FLAG ((uint32_t)0x00000040U) +#define MDIOS_REG7_FLAG ((uint32_t)0x00000080U) +#define MDIOS_REG8_FLAG ((uint32_t)0x00000100U) +#define MDIOS_REG9_FLAG ((uint32_t)0x00000200U) +#define MDIOS_REG10_FLAG ((uint32_t)0x00000400U) +#define MDIOS_REG11_FLAG ((uint32_t)0x00000800U) +#define MDIOS_REG12_FLAG ((uint32_t)0x00001000U) +#define MDIOS_REG13_FLAG ((uint32_t)0x00002000U) +#define MDIOS_REG14_FLAG ((uint32_t)0x00004000U) +#define MDIOS_REG15_FLAG ((uint32_t)0x00008000U) +#define MDIOS_REG16_FLAG ((uint32_t)0x00010000U) +#define MDIOS_REG17_FLAG ((uint32_t)0x00020000U) +#define MDIOS_REG18_FLAG ((uint32_t)0x00040000U) +#define MDIOS_REG19_FLAG ((uint32_t)0x00080000U) +#define MDIOS_REG20_FLAG ((uint32_t)0x00100000U) +#define MDIOS_REG21_FLAG ((uint32_t)0x00200000U) +#define MDIOS_REG22_FLAG ((uint32_t)0x00400000U) +#define MDIOS_REG23_FLAG ((uint32_t)0x00800000U) +#define MDIOS_REG24_FLAG ((uint32_t)0x01000000U) +#define MDIOS_REG25_FLAG ((uint32_t)0x02000000U) +#define MDIOS_REG26_FLAG ((uint32_t)0x04000000U) +#define MDIOS_REG27_FLAG ((uint32_t)0x08000000U) +#define MDIOS_REG28_FLAG ((uint32_t)0x10000000U) +#define MDIOS_REG29_FLAG ((uint32_t)0x20000000U) +#define MDIOS_REG30_FLAG ((uint32_t)0x40000000U) +#define MDIOS_REG31_FLAG ((uint32_t)0x80000000U) +#define MDIOS_ALLREG_FLAG ((uint32_t)0xFFFFFFFFU) +/** + * @} + */ + +/** @defgroup MDIOS_Interrupt_sources Interrupt Sources + * @{ + */ +#define MDIOS_IT_WRITE MDIOS_CR_WRIE +#define MDIOS_IT_READ MDIOS_CR_RDIE +#define MDIOS_IT_ERROR MDIOS_CR_EIE +/** + * @} + */ + +/** @defgroup MDIOS_Interrupt_Flags MDIOS Interrupt Flags + * @{ + */ +#define MDIOS_TURNAROUND_ERROR_FLAG MDIOS_SR_TERF +#define MDIOS_START_ERROR_FLAG MDIOS_SR_SERF +#define MDIOS_PREAMBLE_ERROR_FLAG MDIOS_SR_PERF +/** + * @} + */ + + /** @defgroup MDIOS_Wakeup_Line MDIOS Wakeup Line + * @{ + */ +#define MDIOS_WAKEUP_EXTI_LINE ((uint32_t)0x01000000) /* !< EXTI Line 24 */ +/** + * @} + */ + +/** + * @} + */ +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup MDIOS_Exported_Macros MDIOS Exported Macros + * @{ + */ + +/** @brief Reset MDIOS handle state + * @param __HANDLE__: MDIOS handle. + * @retval None + */ +#define __HAL_MDIOS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_MDIOS_STATE_RESET) + +/** + * @brief Enable/Disable the MDIOS peripheral. + * @param __HANDLE__: specifies the MDIOS handle. + * @retval None + */ +#define __HAL_MDIOS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= MDIOS_CR_EN) +#define __HAL_MDIOS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~MDIOS_CR_EN) + + +/** + * @brief Enable the MDIOS device interrupt. + * @param __HANDLE__: specifies the MDIOS handle. + * @param __INTERRUPT__ : specifies the MDIOS interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg MDIOS_IT_WRITE: Register write interrupt + * @arg MDIOS_IT_READ: Register read interrupt + * @arg MDIOS_IT_ERROR: Error interrupt + * @retval None + */ +#define __HAL_MDIOS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the MDIOS device interrupt. + * @param __HANDLE__: specifies the MDIOS handle. + * @param __INTERRUPT__ : specifies the MDIOS interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg MDIOS_IT_WRITE: Register write interrupt + * @arg MDIOS_IT_READ: Register read interrupt + * @arg MDIOS_IT_ERROR: Error interrupt + * @retval None + */ +#define __HAL_MDIOS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** @brief Set MDIOS slave get write register flag + * @param __HANDLE__: specifies the MDIOS handle. + * @param __FLAG__: specifies the write register flag + * @retval The state of write flag + */ +#define __HAL_MDIOS_GET_WRITE_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->WRFR & (__FLAG__)) + +/** @brief MDIOS slave get read register flag + * @param __HANDLE__: specifies the MDIOS handle. + * @param __FLAG__: specifies the read register flag + * @retval The state of read flag + */ +#define __HAL_MDIOS_GET_READ_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->RDFR & (__FLAG__)) + +/** @brief MDIOS slave get interrupt + * @param __HANDLE__: specifies the MDIOS handle. + * @param __FLAG__ : specifies the Error flag. + * This parameter can be one or a combination of the following values: + * @arg MDIOS_TURNARROUND_ERROR_FLAG: Register write interrupt + * @arg MDIOS_START_ERROR_FLAG: Register read interrupt + * @arg MDIOS_PREAMBLE_ERROR_FLAG: Error interrupt + * @retval The state of the error flag + */ +#define __HAL_MDIOS_GET_ERROR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR & (__FLAG__)) + +/** @brief MDIOS slave clear interrupt + * @param __HANDLE__: specifies the MDIOS handle. + * @param __FLAG__ : specifies the Error flag. + * This parameter can be one or a combination of the following values: + * @arg MDIOS_TURNARROUND_ERROR_FLAG: Register write interrupt + * @arg MDIOS_START_ERROR_FLAG: Register read interrupt + * @arg MDIOS_PREAMBLE_ERROR_FLAG: Error interrupt + * @retval none + */ +#define __HAL_MDIOS_CLEAR_ERROR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLRFR) |= (__FLAG__) + +/** + * @brief Checks whether the specified MDIOS interrupt is set or not. + * @param __HANDLE__: specifies the MDIOS handle. + * @param __INTERRUPT__ : specifies the MDIOS interrupt sources + * This parameter can be one or a combination of the following values: + * @arg MDIOS_IT_WRITE: Register write interrupt + * @arg MDIOS_IT_READ: Register read interrupt + * @arg MDIOS_IT_ERROR: Error interrupt + * @retval The state of the interrupt source + */ +#define __HAL_MDIOS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) + +/** + * @brief Enable the MDIOS WAKEUP Exti Line. + * @retval None. + */ +#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_IT() (EXTI->IMR |= (MDIOS_WAKEUP_EXTI_LINE)) + +/** + * @brief Disable the MDIOS WAKEUP Exti Line. + * @retval None. + */ +#define __HAL_MDIOS_WAKEUP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(MDIOS_WAKEUP_EXTI_LINE)) + +/** + * @brief Enable event on MDIOS WAKEUP Exti Line. + * @retval None. + */ +#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_EVENT() (EXTI->EMR |= (MDIOS_WAKEUP_EXTI_LINE)) + +/** + * @brief Disable event on MDIOS WAKEUP Exti Line. + * @retval None. + */ +#define __HAL_MDIOS_WAKEUP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(MDIOS_WAKEUP_EXTI_LINE)) + +/** + * @brief checks whether the specified MDIOS WAKEUP Exti interrupt flag is set or not. + * @retval EXTI MDIOS WAKEUP Line Status. + */ +#define __HAL_MDIOS_WAKEUP_EXTI_GET_FLAG() (EXTI->PR & (MDIOS_WAKEUP_EXTI_LINE)) + +/** + * @brief Clear the MDIOS WAKEUP Exti flag. + * @retval None. + */ +#define __HAL_MDIOS_WAKEUP_EXTI_CLEAR_FLAG() (EXTI->PR = (MDIOS_WAKEUP_EXTI_LINE)) + +/** + * @brief Enables rising edge trigger to the MDIOS External interrupt line. + * @retval None + */ +#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER() EXTI->RTSR |= MDIOS_WAKEUP_EXTI_LINE + +/** + * @brief Disables the rising edge trigger to the MDIOS External interrupt line. + * @retval None + */ +#define __HAL_MDIOS_WAKEUP_EXTI_DISABLE_RISING_EDGE_TRIGGER() EXTI->RTSR &= ~(MDIOS_WAKEUP_EXTI_LINE) + +/** + * @brief Enables falling edge trigger to the MDIOS External interrupt line. + * @retval None + */ +#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER() EXTI->FTSR |= (MDIOS_WAKEUP_EXTI_LINE) + +/** + * @brief Disables falling edge trigger to the MDIOS External interrupt line. + * @retval None + */ +#define __HAL_MDIOS_WAKEUP_EXTI_DISABLE_FALLING_EDGE_TRIGGER() EXTI->FTSR &= ~(MDIOS_WAKEUP_EXTI_LINE) + +/** + * @brief Enables rising/falling edge trigger to the MDIOS External interrupt line. + * @retval None + */ +#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER() EXTI->RTSR |= MDIOS_WAKEUP_EXTI_LINE;\ + EXTI->FTSR |= MDIOS_WAKEUP_EXTI_LINE + +/** + * @brief Disables rising/falling edge trigger to the MDIOS External interrupt line. + * @retval None + */ +#define __HAL_MDIOS_WAKEUP_EXTI_DISABLE_FALLINGRISING_TRIGGER() EXTI->RTSR &= ~(MDIOS_WAKEUP_EXTI_LINE);\ + EXTI->FTSR &= ~(MDIOS_WAKEUP_EXTI_LINE) +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_MDIOS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (MDIOS_WAKEUP_EXTI_LINE)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup MDIOS_Exported_Functions MDIOS Exported Functions + * @{ + */ + +/** @addtogroup MDIOS_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_MDIOS_Init(MDIOS_HandleTypeDef *hmdios); +HAL_StatusTypeDef HAL_MDIOS_DeInit(MDIOS_HandleTypeDef *hmdios); +void HAL_MDIOS_MspInit(MDIOS_HandleTypeDef *hmdios); +void HAL_MDIOS_MspDeInit(MDIOS_HandleTypeDef *hmdios); +/** + * @} + */ + +/** @addtogroup MDIOS_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_MDIOS_WriteReg(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum, uint16_t Data); +HAL_StatusTypeDef HAL_MDIOS_ReadReg(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum, uint16_t *pData); + +uint32_t HAL_MDIOS_GetWrittenRegAddress(MDIOS_HandleTypeDef *hmdios); +uint32_t HAL_MDIOS_GetReadRegAddress(MDIOS_HandleTypeDef *hmdios); +HAL_StatusTypeDef HAL_MDIOS_ClearWriteRegAddress(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum); +HAL_StatusTypeDef HAL_MDIOS_ClearReadRegAddress(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum); + +HAL_StatusTypeDef HAL_MDIOS_EnableEvents(MDIOS_HandleTypeDef *hmdios); +void HAL_MDIOS_IRQHandler(MDIOS_HandleTypeDef *hmdios); +void HAL_MDIOS_WriteCpltCallback(MDIOS_HandleTypeDef *hmdios); +void HAL_MDIOS_ReadCpltCallback(MDIOS_HandleTypeDef *hmdios); +void HAL_MDIOS_ErrorCallback(MDIOS_HandleTypeDef *hmdios); +void HAL_MDIOS_WakeUpCallback(MDIOS_HandleTypeDef *hmdios); +/** + * @} + */ + +/** @addtogroup MDIOS_Exported_Functions_Group3 + * @{ + */ +uint32_t HAL_MDIOS_GetError(MDIOS_HandleTypeDef *hmdios); +HAL_MDIOS_StateTypeDef HAL_MDIOS_GetState(MDIOS_HandleTypeDef *hmdios); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup MDIOS_Private_Types MDIOS Private Types + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup MDIOS_Private_Variables MDIOS Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup MDIOS_Private_Constants MDIOS Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup MDIOS_Private_Macros MDIOS Private Macros + * @{ + */ + +#define IS_MDIOS_PORTADDRESS(__ADDR__) ((__ADDR__) < 32) + +#define IS_MDIOS_REGISTER(__REGISTER__) ((__REGISTER__) < 32) + +#define IS_MDIOS_PREAMBLECHECK(__PREAMBLECHECK__) (((__PREAMBLECHECK__) == MDIOS_PREAMBLE_CHECK_ENABLE) || \ + ((__PREAMBLECHECK__) == MDIOS_PREAMBLE_CHECK_DISABLE)) + + /** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup MDIOS_Private_Functions MDIOS Private Functions + * @{ + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* MDIOS */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_MDIOS_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/35529b95/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_mmc.h ---------------------------------------------------------------------- diff --git a/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_mmc.h b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_mmc.h new file mode 100644 index 0000000..4b9f664 --- /dev/null +++ b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_mmc.h @@ -0,0 +1,695 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_mmc.h + * @author MCD Application Team + * @version V1.2.0 + * @date 30-December-2016 + * @brief Header file of MMC HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_MMC_H +#define __STM32F7xx_HAL_MMC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f7xx_ll_sdmmc.h" + +/** @addtogroup STM32F7xx_HAL_Driver + * @{ + */ + +/** @addtogroup MMC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup MMC_Exported_Types MMC Exported Types + * @{ + */ + +/** @defgroup MMC_Exported_Types_Group1 MMC State enumeration structure + * @{ + */ +typedef enum +{ + HAL_MMC_STATE_RESET = ((uint32_t)0x00000000U), /*!< MMC not yet initialized or disabled */ + HAL_MMC_STATE_READY = ((uint32_t)0x00000001U), /*!< MMC initialized and ready for use */ + HAL_MMC_STATE_TIMEOUT = ((uint32_t)0x00000002U), /*!< MMC Timeout state */ + HAL_MMC_STATE_BUSY = ((uint32_t)0x00000003U), /*!< MMC process ongoing */ + HAL_MMC_STATE_PROGRAMMING = ((uint32_t)0x00000004U), /*!< MMC Programming State */ + HAL_MMC_STATE_RECEIVING = ((uint32_t)0x00000005U), /*!< MMC Receinving State */ + HAL_MMC_STATE_TRANSFER = ((uint32_t)0x00000006U), /*!< MMC Transfert State */ + HAL_MMC_STATE_ERROR = ((uint32_t)0x0000000FU) /*!< MMC is in error state */ +}HAL_MMC_StateTypeDef; +/** + * @} + */ + +/** @defgroup MMC_Exported_Types_Group2 MMC Card State enumeration structure + * @{ + */ +typedef enum +{ + HAL_MMC_CARD_READY = ((uint32_t)0x00000001U), /*!< Card state is ready */ + HAL_MMC_CARD_IDENTIFICATION = ((uint32_t)0x00000002U), /*!< Card is in identification state */ + HAL_MMC_CARD_STANDBY = ((uint32_t)0x00000003U), /*!< Card is in standby state */ + HAL_MMC_CARD_TRANSFER = ((uint32_t)0x00000004U), /*!< Card is in transfer state */ + HAL_MMC_CARD_SENDING = ((uint32_t)0x00000005U), /*!< Card is sending an operation */ + HAL_MMC_CARD_RECEIVING = ((uint32_t)0x00000006U), /*!< Card is receiving operation information */ + HAL_MMC_CARD_PROGRAMMING = ((uint32_t)0x00000007U), /*!< Card is in programming state */ + HAL_MMC_CARD_DISCONNECTED = ((uint32_t)0x00000008U), /*!< Card is disconnected */ + HAL_MMC_CARD_ERROR = ((uint32_t)0x000000FFU) /*!< Card response Error */ +}HAL_MMC_CardStateTypeDef; +/** + * @} + */ + +/** @defgroup MMC_Exported_Types_Group3 MMC Handle Structure definition + * @{ + */ +#define MMC_InitTypeDef SDMMC_InitTypeDef +#define MMC_TypeDef SDMMC_TypeDef + +/** + * @brief MMC Card Information Structure definition + */ +typedef struct +{ + uint32_t CardType; /*!< Specifies the card Type */ + + uint32_t Class; /*!< Specifies the class of the card class */ + + uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */ + + uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */ + + uint32_t BlockSize; /*!< Specifies one block size in bytes */ + + uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */ + + uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */ + +}HAL_MMC_CardInfoTypeDef; + +/** + * @brief MMC handle Structure definition + */ +typedef struct +{ + MMC_TypeDef *Instance; /*!< MMC registers base address */ + + MMC_InitTypeDef Init; /*!< MMC required parameters */ + + HAL_LockTypeDef Lock; /*!< MMC locking object */ + + uint32_t *pTxBuffPtr; /*!< Pointer to MMC Tx transfer Buffer */ + + uint32_t TxXferSize; /*!< MMC Tx Transfer size */ + + uint32_t *pRxBuffPtr; /*!< Pointer to MMC Rx transfer Buffer */ + + uint32_t RxXferSize; /*!< MMC Rx Transfer size */ + + __IO uint32_t Context; /*!< MMC transfer context */ + + __IO HAL_MMC_StateTypeDef State; /*!< MMC card State */ + + __IO uint32_t ErrorCode; /*!< MMC Card Error codes */ + + DMA_HandleTypeDef *hdmarx; /*!< MMC Rx DMA handle parameters */ + + DMA_HandleTypeDef *hdmatx; /*!< MMC Tx DMA handle parameters */ + + HAL_MMC_CardInfoTypeDef MmcCard; /*!< MMC Card information */ + + uint32_t CSD[4]; /*!< MMC card specific data table */ + + uint32_t CID[4]; /*!< MMC card identification number table */ + +}MMC_HandleTypeDef; + +/** + * @} + */ + +/** @defgroup MMC_Exported_Types_Group4 Card Specific Data: CSD Register + * @{ + */ +typedef struct +{ + __IO uint8_t CSDStruct; /*!< CSD structure */ + __IO uint8_t SysSpecVersion; /*!< System specification version */ + __IO uint8_t Reserved1; /*!< Reserved */ + __IO uint8_t TAAC; /*!< Data read access time 1 */ + __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ + __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ + __IO uint16_t CardComdClasses; /*!< Card command classes */ + __IO uint8_t RdBlockLen; /*!< Max. read data block length */ + __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ + __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ + __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ + __IO uint8_t DSRImpl; /*!< DSR implemented */ + __IO uint8_t Reserved2; /*!< Reserved */ + __IO uint32_t DeviceSize; /*!< Device Size */ + __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ + __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ + __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ + __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ + __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ + __IO uint8_t EraseGrSize; /*!< Erase group size */ + __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ + __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ + __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ + __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ + __IO uint8_t WrSpeedFact; /*!< Write speed factor */ + __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ + __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ + __IO uint8_t Reserved3; /*!< Reserved */ + __IO uint8_t ContentProtectAppli; /*!< Content protection application */ + __IO uint8_t FileFormatGrouop; /*!< File format group */ + __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ + __IO uint8_t PermWrProtect; /*!< Permanent write protection */ + __IO uint8_t TempWrProtect; /*!< Temporary write protection */ + __IO uint8_t FileFormat; /*!< File format */ + __IO uint8_t ECC; /*!< ECC code */ + __IO uint8_t CSD_CRC; /*!< CSD CRC */ + __IO uint8_t Reserved4; /*!< Always 1 */ + +}HAL_MMC_CardCSDTypeDef; +/** + * @} + */ + +/** @defgroup MMC_Exported_Types_Group5 Card Identification Data: CID Register + * @{ + */ +typedef struct +{ + __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ + __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ + __IO uint32_t ProdName1; /*!< Product Name part1 */ + __IO uint8_t ProdName2; /*!< Product Name part2 */ + __IO uint8_t ProdRev; /*!< Product Revision */ + __IO uint32_t ProdSN; /*!< Product Serial Number */ + __IO uint8_t Reserved1; /*!< Reserved1 */ + __IO uint16_t ManufactDate; /*!< Manufacturing Date */ + __IO uint8_t CID_CRC; /*!< CID CRC */ + __IO uint8_t Reserved2; /*!< Always 1 */ + +}HAL_MMC_CardCIDTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup MMC_Exported_Constants Exported Constants + * @{ + */ + +#define BLOCKSIZE ((uint32_t)512U) /*!< Block size is 512 bytes */ +#define CAPACITY ((uint32_t)0x80000000U) /*!< 2 G bytes constant */ + +/** @defgroup MMC_Exported_Constansts_Group1 MMC Error status enumeration Structure definition + * @{ + */ +#define HAL_MMC_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */ +#define HAL_MMC_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */ +#define HAL_MMC_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */ +#define HAL_MMC_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */ +#define HAL_MMC_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */ +#define HAL_MMC_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */ +#define HAL_MMC_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */ +#define HAL_MMC_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */ +#define HAL_MMC_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the + number of transferred bytes does not match the block length */ +#define HAL_MMC_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */ +#define HAL_MMC_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */ +#define HAL_MMC_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */ +#define HAL_MMC_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock + command or if there was an attempt to access a locked card */ +#define HAL_MMC_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */ +#define HAL_MMC_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */ +#define HAL_MMC_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */ +#define HAL_MMC_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */ +#define HAL_MMC_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */ +#define HAL_MMC_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */ +#define HAL_MMC_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */ +#define HAL_MMC_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */ +#define HAL_MMC_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */ +#define HAL_MMC_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */ +#define HAL_MMC_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out + of erase sequence command was received */ +#define HAL_MMC_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */ +#define HAL_MMC_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */ +#define HAL_MMC_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */ +#define HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */ +#define HAL_MMC_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */ +#define HAL_MMC_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */ +#define HAL_MMC_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */ +#define HAL_MMC_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */ +#define HAL_MMC_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */ + +/** + * @} + */ + +/** @defgroup MMC_Exported_Constansts_Group2 MMC context enumeration + * @{ + */ +#define MMC_CONTEXT_NONE ((uint32_t)0x00000000U) /*!< None */ +#define MMC_CONTEXT_READ_SINGLE_BLOCK ((uint32_t)0x00000001U) /*!< Read single block operation */ +#define MMC_CONTEXT_READ_MULTIPLE_BLOCK ((uint32_t)0x00000002U) /*!< Read multiple blocks operation */ +#define MMC_CONTEXT_WRITE_SINGLE_BLOCK ((uint32_t)0x00000010U) /*!< Write single block operation */ +#define MMC_CONTEXT_WRITE_MULTIPLE_BLOCK ((uint32_t)0x00000020U) /*!< Write multiple blocks operation */ +#define MMC_CONTEXT_IT ((uint32_t)0x00000008U) /*!< Process in Interrupt mode */ +#define MMC_CONTEXT_DMA ((uint32_t)0x00000080U) /*!< Process in DMA mode */ + +/** + * @} + */ + +/** @defgroup MMC_Exported_Constansts_Group3 MMC Voltage mode + * @{ + */ +/** + * @brief + */ +#define MMC_HIGH_VOLTAGE_RANGE 0x80FF8000U /*!< VALUE OF ARGUMENT */ +#define MMC_DUAL_VOLTAGE_RANGE 0x80FF8080U /*!< VALUE OF ARGUMENT */ +#define eMMC_HIGH_VOLTAGE_RANGE 0xC0FF8000U /*!< for eMMC > 2Gb sector mode */ +#define eMMC_DUAL_VOLTAGE_RANGE 0xC0FF8080U /*!< for eMMC > 2Gb sector mode */ +#define MMC_INVALID_VOLTAGE_RANGE 0x0001FF01U +/** + * @} + */ + +/** @defgroup MMC_Exported_Constansts_Group4 MMC Memory Cards + * @{ + */ +#define MMC_HIGH_VOLTAGE_CARD ((uint32_t)0x00000000U) +#define MMC_DUAL_VOLTAGE_CARD ((uint32_t)0x00000001U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup MMC_Exported_macros MMC Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ + +/** + * @brief Enable the MMC device. + * @retval None + */ +#define __HAL_MMC_ENABLE(__HANDLE__) __SDMMC_ENABLE((__HANDLE__)->Instance) + +/** + * @brief Disable the MMC device. + * @retval None + */ +#define __HAL_MMC_DISABLE(__HANDLE__) __SDMMC_DISABLE((__HANDLE__)->Instance) + +/** + * @brief Enable the SDMMC DMA transfer. + * @retval None + */ +#define __HAL_MMC_DMA_ENABLE(__HANDLE__) __SDMMC_DMA_ENABLE((__HANDLE__)->Instance) + +/** + * @brief Disable the SDMMC DMA transfer. + * @retval None + */ +#define __HAL_MMC_DMA_DISABLE(__HANDLE__) __SDMMC_DMA_DISABLE((__HANDLE__)->Instance) + +/** + * @brief Enable the MMC device interrupt. + * @param __HANDLE__: MMC Handle + * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDACT: Command transfer in progress interrupt + * @arg SDMMC_IT_TXACT: Data transmit in progress interrupt + * @arg SDMMC_IT_RXACT: Data receive in progress interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDMMC_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDMMC_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt + * @retval None + */ +#define __HAL_MMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Disable the MMC device interrupt. + * @param __HANDLE__: MMC Handle + * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDACT: Command transfer in progress interrupt + * @arg SDMMC_IT_TXACT: Data transmit in progress interrupt + * @arg SDMMC_IT_RXACT: Data receive in progress interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDMMC_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDMMC_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt + * @retval None + */ +#define __HAL_MMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Check whether the specified MMC flag is set or not. + * @param __HANDLE__: MMC Handle + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_CMDACT: Command transfer in progress + * @arg SDMMC_FLAG_TXACT: Data transmit in progress + * @arg SDMMC_FLAG_RXACT: Data receive in progress + * @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDMMC_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDMMC_FLAG_RXFIFOF: Receive FIFO full + * @arg SDMMC_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDMMC_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDMMC_FLAG_TXDAVL: Data available in transmit FIFO + * @arg SDMMC_FLAG_RXDAVL: Data available in receive FIFO + * @arg SDMMC_FLAG_SDIOIT: SD I/O interrupt received + * @retval The new state of MMC FLAG (SET or RESET). + */ +#define __HAL_MMC_GET_FLAG(__HANDLE__, __FLAG__) __SDMMC_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Clear the MMC's pending flags. + * @param __HANDLE__: MMC Handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_SDIOIT: SD I/O interrupt received + * @retval None + */ +#define __HAL_MMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDMMC_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Check whether the specified MMC interrupt has occurred or not. + * @param __HANDLE__: MMC Handle + * @param __INTERRUPT__: specifies the SDMMC interrupt source to check. + * This parameter can be one of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDACT: Command transfer in progress interrupt + * @arg SDMMC_IT_TXACT: Data transmit in progress interrupt + * @arg SDMMC_IT_RXACT: Data receive in progress interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDMMC_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDMMC_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt + * @retval The new state of SD IT (SET or RESET). + */ +#define __HAL_MMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDMMC_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Clear the MMC's interrupt pending bits. + * @param __HANDLE__: MMC Handle + * @param __INTERRUPT__: specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, SDMMC_DCOUNT, is zero) interrupt + * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt + * @retval None + */ +#define __HAL_MMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDMMC_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup MMC_Exported_Functions MMC Exported Functions + * @{ + */ + +/** @defgroup MMC_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc); +HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc); +HAL_StatusTypeDef HAL_MMC_DeInit (MMC_HandleTypeDef *hmmc); +void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc); +void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc); +/** + * @} + */ + +/** @defgroup MMC_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); +HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); +HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd); +/* Non-Blocking mode: IT */ +HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); + +void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc); + +/* Callback in non blocking modes (DMA) */ +void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc); +void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc); +void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc); +void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc); +/** + * @} + */ + +/** @defgroup MMC_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode); +/** + * @} + */ + +/** @defgroup MMC_Exported_Functions_Group4 MMC card related functions + * @{ + */ +HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc); +HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID); +HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD); +HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo); +/** + * @} + */ + +/** @defgroup MMC_Exported_Functions_Group5 Peripheral State and Errors functions + * @{ + */ +HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc); +uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc); +/** + * @} + */ + +/** @defgroup MMC_Exported_Functions_Group6 Perioheral Abort management + * @{ + */ +HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc); +HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc); +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup MMC_Private_Types MMC Private Types + * @{ + */ + +/** + * @} + */ + +/* Private defines -----------------------------------------------------------*/ +/** @defgroup MMC_Private_Defines MMC Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup MMC_Private_Variables MMC Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup MMC_Private_Constants MMC Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup MMC_Private_Macros MMC Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup MMC_Private_Functions_Prototypes MMC Private Functions Prototypes + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup MMC_Private_Functions MMC Private Functions + * @{ + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F7xx_HAL_MMC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/35529b95/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_nand.h ---------------------------------------------------------------------- diff --git a/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_nand.h b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_nand.h new file mode 100644 index 0000000..500594d --- /dev/null +++ b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_nand.h @@ -0,0 +1,336 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_nand.h + * @author MCD Application Team + * @version V1.2.0 + * @date 30-December-2016 + * @brief Header file of NAND HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_NAND_H +#define __STM32F7xx_HAL_NAND_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f7xx_ll_fmc.h" + +/** @addtogroup STM32F7xx_HAL_Driver + * @{ + */ + +/** @addtogroup NAND + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup NAND_Exported_Types NAND Exported Types + * @{ + */ + +/** + * @brief HAL NAND State structures definition + */ +typedef enum +{ + HAL_NAND_STATE_RESET = 0x00U, /*!< NAND not yet initialized or disabled */ + HAL_NAND_STATE_READY = 0x01U, /*!< NAND initialized and ready for use */ + HAL_NAND_STATE_BUSY = 0x02U, /*!< NAND internal process is ongoing */ + HAL_NAND_STATE_ERROR = 0x03U /*!< NAND error state */ +}HAL_NAND_StateTypeDef; + +/** + * @brief NAND Memory electronic signature Structure definition + */ +typedef struct +{ + /*<! NAND memory electronic signature maker and device IDs */ + + uint8_t Maker_Id; + + uint8_t Device_Id; + + uint8_t Third_Id; + + uint8_t Fourth_Id; +}NAND_IDTypeDef; + +/** + * @brief NAND Memory address Structure definition + */ +typedef struct +{ + uint16_t Page; /*!< NAND memory Page address */ + + uint16_t Plane; /*!< NAND memory Zone address */ + + uint16_t Block; /*!< NAND memory Block address */ + +}NAND_AddressTypeDef; + +/** + * @brief NAND Memory info Structure definition + */ +typedef struct +{ + uint32_t PageSize; /*!< NAND memory page (without spare area) size measured in bytes + for 8 bits adressing or words for 16 bits addressing */ + + uint32_t SpareAreaSize; /*!< NAND memory spare area size measured in bytes + for 8 bits adressing or words for 16 bits addressing */ + + uint32_t BlockSize; /*!< NAND memory block size measured in number of pages */ + + uint32_t BlockNbr; /*!< NAND memory number of total blocks */ + + uint32_t PlaneNbr; /*!< NAND memory number of planes */ + + uint32_t PlaneSize; /*!< NAND memory zone size measured in number of blocks */ + + FunctionalState ExtraCommandEnable; /*!< NAND extra command needed for Page reading mode. This + parameter is mandatory for some NAND parts after the read + command (NAND_CMD_AREA_TRUE1) and before DATA reading sequence. + Example: Toshiba THTH58BYG3S0HBAI6. + This parameter could be ENABLE or DISABLE + Please check the Read Mode sequnece in the NAND device datasheet */ +}NAND_DeviceConfigTypeDef; + +/** + * @brief NAND handle Structure definition + */ +typedef struct +{ + FMC_NAND_TypeDef *Instance; /*!< Register base address */ + + FMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */ + + HAL_LockTypeDef Lock; /*!< NAND locking object */ + + __IO HAL_NAND_StateTypeDef State; /*!< NAND device access state */ + + NAND_DeviceConfigTypeDef Config; /*!< NAND phusical characteristic information structure */ + +}NAND_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup NAND_Exported_Macros NAND Exported Macros + * @{ + */ + +/** @brief Reset NAND handle state + * @param __HANDLE__: specifies the NAND handle. + * @retval None + */ +#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup NAND_Exported_Functions NAND Exported Functions + * @{ + */ + +/** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing); +HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand); + +HAL_StatusTypeDef HAL_NAND_ConfigDevice(NAND_HandleTypeDef *hnand, NAND_DeviceConfigTypeDef *pDeviceConfig); + +HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID); + +void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand); +void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand); +void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand); +void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand); + +/** + * @} + */ + +/** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions + * @{ + */ + +/* IO operation functions ****************************************************/ + +HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand); + +HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead); +HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite); +HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead); +HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite); + +HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumPageToRead); +HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumPageToWrite); +HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumSpareAreaToRead); +HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumSpareAreaTowrite); + +HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress); + +uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress); + +/** + * @} + */ + +/** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* NAND Control functions ****************************************************/ +HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand); +HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand); +HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout); + +/** + * @} + */ + +/** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +/* NAND State functions *******************************************************/ +HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand); +uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand); +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup NAND_Private_Constants NAND Private Constants + * @{ + */ +#define NAND_DEVICE ((uint32_t)0x80000000U) +#define NAND_WRITE_TIMEOUT ((uint32_t)0x01000000U) + +#define CMD_AREA ((uint32_t)(1<<16)) /* A16 = CLE high */ +#define ADDR_AREA ((uint32_t)(1<<17)) /* A17 = ALE high */ + +#define NAND_CMD_AREA_A ((uint8_t)0x00U) +#define NAND_CMD_AREA_B ((uint8_t)0x01U) +#define NAND_CMD_AREA_C ((uint8_t)0x50U) +#define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30U) + +#define NAND_CMD_WRITE0 ((uint8_t)0x80U) +#define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10U) +#define NAND_CMD_ERASE0 ((uint8_t)0x60U) +#define NAND_CMD_ERASE1 ((uint8_t)0xD0U) +#define NAND_CMD_READID ((uint8_t)0x90U) +#define NAND_CMD_STATUS ((uint8_t)0x70U) +#define NAND_CMD_LOCK_STATUS ((uint8_t)0x7AU) +#define NAND_CMD_RESET ((uint8_t)0xFFU) + +/* NAND memory status */ +#define NAND_VALID_ADDRESS ((uint32_t)0x00000100U) +#define NAND_INVALID_ADDRESS ((uint32_t)0x00000200U) +#define NAND_TIMEOUT_ERROR ((uint32_t)0x00000400U) +#define NAND_BUSY ((uint32_t)0x00000000U) +#define NAND_ERROR ((uint32_t)0x00000001U) +#define NAND_READY ((uint32_t)0x00000040U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup NAND_Private_Macros NAND Private Macros + * @{ + */ + +/** + * @brief NAND memory address computation. + * @param __ADDRESS__: NAND memory address. + * @param __HANDLE__ : NAND handle. + * @retval NAND Raw address value + */ +#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \ + (((__ADDRESS__)->Block + (((__ADDRESS__)->Plane) * ((__HANDLE__)->Config.PlaneSize)))* ((__HANDLE__)->Config.BlockSize))) + +#define COLUMN_ADDRESS( __HANDLE__) ((__HANDLE__)->Config.PageSize) + +/** + * @brief NAND memory address cycling. + * @param __ADDRESS__: NAND memory address. + * @retval NAND address cycling value. + */ +#define ADDR_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */ +#define ADDR_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd addressing cycle */ +#define ADDR_3RD_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16) /* 3rd addressing cycle */ +#define ADDR_4TH_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24) /* 4th addressing cycle */ + +/** + * @brief NAND memory Columns cycling. + * @param __ADDRESS__: NAND memory address. + * @retval NAND Column address cycling value. + */ +#define COLUMN_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st Column addressing cycle */ +#define COLUMN_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd Column addressing cycle */ + +/** + * @} + */ + +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_NAND_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/35529b95/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_nor.h ---------------------------------------------------------------------- diff --git a/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_nor.h b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_nor.h new file mode 100644 index 0000000..e2cf980 --- /dev/null +++ b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_nor.h @@ -0,0 +1,299 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_nor.h + * @author MCD Application Team + * @version V1.2.0 + * @date 30-December-2016 + * @brief Header file of NOR HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_NOR_H +#define __STM32F7xx_HAL_NOR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f7xx_ll_fmc.h" + + +/** @addtogroup STM32F7xx_HAL_Driver + * @{ + */ + +/** @addtogroup NOR + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ +/** @defgroup NOR_Exported_Types NOR Exported Types + * @{ + */ + +/** + * @brief HAL SRAM State structures definition + */ +typedef enum +{ + HAL_NOR_STATE_RESET = 0x00U, /*!< NOR not yet initialized or disabled */ + HAL_NOR_STATE_READY = 0x01U, /*!< NOR initialized and ready for use */ + HAL_NOR_STATE_BUSY = 0x02U, /*!< NOR internal processing is ongoing */ + HAL_NOR_STATE_ERROR = 0x03U, /*!< NOR error state */ + HAL_NOR_STATE_PROTECTED = 0x04U /*!< NOR NORSRAM device write protected */ +}HAL_NOR_StateTypeDef; + +/** + * @brief FMC NOR Status typedef + */ +typedef enum +{ + HAL_NOR_STATUS_SUCCESS = 0U, + HAL_NOR_STATUS_ONGOING, + HAL_NOR_STATUS_ERROR, + HAL_NOR_STATUS_TIMEOUT +}HAL_NOR_StatusTypeDef; + +/** + * @brief FMC NOR ID typedef + */ +typedef struct +{ + uint16_t Manufacturer_Code; /*!< Defines the device's manufacturer code used to identify the memory */ + + uint16_t Device_Code1; + + uint16_t Device_Code2; + + uint16_t Device_Code3; /*!< Defines the device's codes used to identify the memory. + These codes can be accessed by performing read operations with specific + control signals and addresses set.They can also be accessed by issuing + an Auto Select command */ +}NOR_IDTypeDef; + +/** + * @brief FMC NOR CFI typedef + */ +typedef struct +{ + /*!< Defines the information stored in the memory's Common flash interface + which contains a description of various electrical and timing parameters, + density information and functions supported by the memory */ + + uint16_t CFI_1; + + uint16_t CFI_2; + + uint16_t CFI_3; + + uint16_t CFI_4; +}NOR_CFITypeDef; + +/** + * @brief NOR handle Structure definition + */ +typedef struct +{ + FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ + + FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ + + FMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */ + + HAL_LockTypeDef Lock; /*!< NOR locking object */ + + __IO HAL_NOR_StateTypeDef State; /*!< NOR device access state */ + +}NOR_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup NOR_Exported_Macros NOR Exported Macros + * @{ + */ +/** @brief Reset NOR handle state + * @param __HANDLE__: specifies the NOR handle. + * @retval None + */ +#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup NOR_Exported_Functions NOR Exported Functions + * @{ + */ + +/** @addtogroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming); +HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout); +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group2 Input and Output functions + * @{ + */ + +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID); +HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor); +HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData); +HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData); + +HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize); +HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize); + +HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address); +HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address); +HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI); +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group3 NOR Control functions + * @{ + */ + +/* NOR Control functions *****************************************************/ +HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor); +HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor); +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group4 NOR State functions + * @{ + */ + +/* NOR State functions ********************************************************/ +HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor); +HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup NOR_Private_Constants NOR Private Constants + * @{ + */ +/* NOR device IDs addresses */ +#define MC_ADDRESS ((uint16_t)0x0000U) +#define DEVICE_CODE1_ADDR ((uint16_t)0x0001U) +#define DEVICE_CODE2_ADDR ((uint16_t)0x000EU) +#define DEVICE_CODE3_ADDR ((uint16_t)0x000FU) + +/* NOR CFI IDs addresses */ +#define CFI1_ADDRESS ((uint16_t)0x61U) +#define CFI2_ADDRESS ((uint16_t)0x62U) +#define CFI3_ADDRESS ((uint16_t)0x63U) +#define CFI4_ADDRESS ((uint16_t)0x64U) + +/* NOR operation wait timeout */ +#define NOR_TMEOUT ((uint16_t)0xFFFFU) + +/* NOR memory data width */ +#define NOR_MEMORY_8B ((uint8_t)0x0U) +#define NOR_MEMORY_16B ((uint8_t)0x1U) + +/* NOR memory device read/write start address */ +#define NOR_MEMORY_ADRESS1 ((uint32_t)0x60000000U) +#define NOR_MEMORY_ADRESS2 ((uint32_t)0x64000000U) +#define NOR_MEMORY_ADRESS3 ((uint32_t)0x68000000U) +#define NOR_MEMORY_ADRESS4 ((uint32_t)0x6C000000U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup NOR_Private_Macros NOR Private Macros + * @{ + */ +/** + * @brief NOR memory address shifting. + * @param __NOR_ADDRESS: NOR base address + * @param __NOR_MEMORY_WIDTH_: NOR memory width + * @param __ADDRESS__: NOR memory address + * @retval NOR shifted address value + */ +#define NOR_ADDR_SHIFT(__NOR_ADDRESS, __NOR_MEMORY_WIDTH_, __ADDRESS__) \ + ((uint32_t)(((__NOR_MEMORY_WIDTH_) == NOR_MEMORY_16B)? \ + ((uint32_t)((__NOR_ADDRESS) + (2 * (__ADDRESS__)))): \ + ((uint32_t)((__NOR_ADDRESS) + (__ADDRESS__))))) + +/** + * @brief NOR memory write data to specified address. + * @param __ADDRESS__: NOR memory address + * @param __DATA__: Data to write + * @retval None + */ +#define NOR_WRITE(__ADDRESS__, __DATA__) do{ \ + (*(__IO uint16_t *)((uint32_t)(__ADDRESS__)) = (__DATA__)); \ + __DSB(); \ + } while(0) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_NOR_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
