Repository: incubator-mynewt-core Updated Branches: refs/heads/develop ea988a0cf -> eed3250d1
Delete unused openocd script files. Project: http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/repo Commit: http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/commit/eed3250d Tree: http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/tree/eed3250d Diff: http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/diff/eed3250d Branch: refs/heads/develop Commit: eed3250d190fc03d49fe27fe899ce49ef7bdef59 Parents: ea988a0 Author: Marko Kiiskila <ma...@runtime.io> Authored: Thu Mar 23 15:09:09 2017 -0700 Committer: Marko Kiiskila <ma...@runtime.io> Committed: Thu Mar 23 15:09:09 2017 -0700 ---------------------------------------------------------------------- hw/bsp/sensorhub/f407.cfg | 82 ------------------------ hw/bsp/stm32f429discovery/f429.cfg | 82 ------------------------ hw/bsp/stm32f429discovery/f429discovery.cfg | 22 ------- hw/bsp/stm32f767-nucleo/_f407.cfg | 82 ------------------------ 4 files changed, 268 deletions(-) ---------------------------------------------------------------------- http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/eed3250d/hw/bsp/sensorhub/f407.cfg ---------------------------------------------------------------------- diff --git a/hw/bsp/sensorhub/f407.cfg b/hw/bsp/sensorhub/f407.cfg deleted file mode 100644 index 7c46d8b..0000000 --- a/hw/bsp/sensorhub/f407.cfg +++ /dev/null @@ -1,82 +0,0 @@ -# -# Licensed to the Apache Software Foundation (ASF) under one -# or more contributor license agreements. See the NOTICE file -# distributed with this work for additional information -# regarding copyright ownership. The ASF licenses this file -# to you under the Apache License, Version 2.0 (the -# "License"); you may not use this file except in compliance -# with the License. You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, -# software distributed under the License is distributed on an -# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY -# KIND, either express or implied. See the License for the -# specific language governing permissions and limitations -# under the License. -# - -# script for stm32f4x family - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME stm32f4x -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -# Work-area is a space in RAM used for flash programming -# By default use 64kB -if { [info exists WORKAREASIZE] } { - set _WORKAREASIZE $WORKAREASIZE -} else { - set _WORKAREASIZE 0x10000 -} - -# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz -# -# Since we may be running of an RC oscilator, we crank down the speed a -# bit more to be on the safe side. Perhaps superstition, but if are -# running off a crystal, we can run closer to the limit. Note -# that there can be a pretty wide band where things are more or less stable. -adapter_khz 1000 - -adapter_nsrst_delay 100 -jtag_ntrst_delay 100 - -#jtag scan chain -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - # See STM Document RM0090 - # Section 32.6.2 - corresponds to Cortex-M4 r0p1 - set _CPUTAPID 0x4ba00477 -} -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -if { [info exists BSTAPID] } { - set _BSTAPID $BSTAPID -} else { - # See STM Document RM0090 - # Section 32.6.3 - set _BSTAPID 0x06413041 -} -jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME - -$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 - -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME - -# if srst is not fitted use SYSRESETREQ to -# perform a soft reset -cortex_m3 reset_config sysresetreq http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/eed3250d/hw/bsp/stm32f429discovery/f429.cfg ---------------------------------------------------------------------- diff --git a/hw/bsp/stm32f429discovery/f429.cfg b/hw/bsp/stm32f429discovery/f429.cfg deleted file mode 100644 index cecf912..0000000 --- a/hw/bsp/stm32f429discovery/f429.cfg +++ /dev/null @@ -1,82 +0,0 @@ -# -# Licensed to the Apache Software Foundation (ASF) under one -# or more contributor license agreements. See the NOTICE file -# distributed with this work for additional information -# regarding copyright ownership. The ASF licenses this file -# to you under the Apache License, Version 2.0 (the -# "License"); you may not use this file except in compliance -# with the License. You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, -# software distributed under the License is distributed on an -# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY -# KIND, either express or implied. See the License for the -# specific language governing permissions and limitations -# under the License. -# - -# script for stm32f4x family - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME stm32f429x -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -# Work-area is a space in RAM used for flash programming -# By default use 64kB -if { [info exists WORKAREASIZE] } { - set _WORKAREASIZE $WORKAREASIZE -} else { - set _WORKAREASIZE 0x10000 -} - -# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz -# -# Since we may be running of an RC oscilator, we crank down the speed a -# bit more to be on the safe side. Perhaps superstition, but if are -# running off a crystal, we can run closer to the limit. Note -# that there can be a pretty wide band where things are more or less stable. -adapter_khz 1000 - -adapter_nsrst_delay 100 -jtag_ntrst_delay 100 - -#jtag scan chain -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - # See STM Document RM0090 - # Section 32.6.2 - corresponds to Cortex-M4 r0p1 - set _CPUTAPID 0x4ba00477 -} -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -if { [info exists BSTAPID] } { - set _BSTAPID $BSTAPID -} else { - # See STM Document RM0090 - # Section 32.6.3 - set _BSTAPID 0x06413041 -} -jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME - -$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 - -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME - -# if srst is not fitted use SYSRESETREQ to -# perform a soft reset -cortex_m3 reset_config sysresetreq http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/eed3250d/hw/bsp/stm32f429discovery/f429discovery.cfg ---------------------------------------------------------------------- diff --git a/hw/bsp/stm32f429discovery/f429discovery.cfg b/hw/bsp/stm32f429discovery/f429discovery.cfg deleted file mode 100644 index ac77b34..0000000 --- a/hw/bsp/stm32f429discovery/f429discovery.cfg +++ /dev/null @@ -1,22 +0,0 @@ -#!/bin/sh -# Licensed to the Apache Software Foundation (ASF) under one -# or more contributor license agreements. See the NOTICE file -# distributed with this work for additional information -# regarding copyright ownership. The ASF licenses this file -# to you under the Apache License, Version 2.0 (the -# "License"); you may not use this file except in compliance -# with the License. You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, -# software distributed under the License is distributed on an -# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY -# KIND, either express or implied. See the License for the -# specific language governing permissions and limitations -# under the License. - -# New version of St-link -source [find interface/stlink-v2-1.cfg] -transport select hla_swd -source [find target/stm32f4x.cfg] http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/eed3250d/hw/bsp/stm32f767-nucleo/_f407.cfg ---------------------------------------------------------------------- diff --git a/hw/bsp/stm32f767-nucleo/_f407.cfg b/hw/bsp/stm32f767-nucleo/_f407.cfg deleted file mode 100644 index 7c46d8b..0000000 --- a/hw/bsp/stm32f767-nucleo/_f407.cfg +++ /dev/null @@ -1,82 +0,0 @@ -# -# Licensed to the Apache Software Foundation (ASF) under one -# or more contributor license agreements. See the NOTICE file -# distributed with this work for additional information -# regarding copyright ownership. The ASF licenses this file -# to you under the Apache License, Version 2.0 (the -# "License"); you may not use this file except in compliance -# with the License. You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, -# software distributed under the License is distributed on an -# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY -# KIND, either express or implied. See the License for the -# specific language governing permissions and limitations -# under the License. -# - -# script for stm32f4x family - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME stm32f4x -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -# Work-area is a space in RAM used for flash programming -# By default use 64kB -if { [info exists WORKAREASIZE] } { - set _WORKAREASIZE $WORKAREASIZE -} else { - set _WORKAREASIZE 0x10000 -} - -# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz -# -# Since we may be running of an RC oscilator, we crank down the speed a -# bit more to be on the safe side. Perhaps superstition, but if are -# running off a crystal, we can run closer to the limit. Note -# that there can be a pretty wide band where things are more or less stable. -adapter_khz 1000 - -adapter_nsrst_delay 100 -jtag_ntrst_delay 100 - -#jtag scan chain -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - # See STM Document RM0090 - # Section 32.6.2 - corresponds to Cortex-M4 r0p1 - set _CPUTAPID 0x4ba00477 -} -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -if { [info exists BSTAPID] } { - set _BSTAPID $BSTAPID -} else { - # See STM Document RM0090 - # Section 32.6.3 - set _BSTAPID 0x06413041 -} -jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME - -$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 - -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME - -# if srst is not fitted use SYSRESETREQ to -# perform a soft reset -cortex_m3 reset_config sysresetreq
