acassis commented on code in PR #16168: URL: https://github.com/apache/nuttx/pull/16168#discussion_r2036775055
########## Documentation/platforms/arm/stm32c0/boards/nucleo-c092rc/index.rst: ########## @@ -0,0 +1,37 @@ +================ +ST Nucleo C092RC +================ + +The Nucleo C092RC is a member of the Nucleo-64 board family. + +CANFD not supported yet. + +Buttons +======= + +B1 USER: the user button is connected to the I/O PC13 of the STM32 +microcontroller. + +Serial Console +============== + +At default USART2 connected to "Virtual COM Port" is used as serial console. + +Configurations +============== + +jumbo +----- Review Comment: @raiden00pl I agree with you that a nsh is not so useful, but it was using as a minimum prove to show that the port worked and it is a good starting point to user create new configs. I like the idea of having a "demo" that does something interesting in the board without user typing commands, similar to graphic demos on boards with LCD. But in a board without "useful" peripheral like nucleo boards and bluepill it is difficult to create a nice demo. -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
