This is an automated email from the ASF dual-hosted git repository.
xiaoxiang pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/nuttx.git
The following commit(s) were added to refs/heads/master by this push:
new 9520f5bfc8e [nxstyle]: fix Inconsistency in function headers style
9520f5bfc8e is described below
commit 9520f5bfc8e09d8fac1659591978af88987d255b
Author: simbit18 <[email protected]>
AuthorDate: Mon May 19 11:28:11 2025 +0200
[nxstyle]: fix Inconsistency in function headers style
added to the end of the header a new line *
added space
Doc Function Headers
https://nuttx.apache.org/docs/latest/contributing/coding_style.html#function-headers
Signed-off-by: simbit18 <[email protected]>
---
arch/arm/src/cxd56xx/cxd56_i2c.c | 10 +++++----
arch/arm/src/efm32/efm32_flash.c | 1 +
arch/arm/src/gd32f4/gd32f4xx_gpio.c | 4 +++-
arch/arm/src/gd32f4/gd32f4xx_gpio.h | 1 +
arch/arm/src/gd32f4/gd32f4xx_rcu.c | 1 +
arch/arm/src/gd32f4/gd32f4xx_rcu.h | 2 ++
arch/arm/src/lc823450/lc823450_mtd.c | 2 ++
arch/arm/src/lc823450/lc823450_usbdev.c | 1 +
arch/arm/src/rp2040/rp2040_adc.c | 17 ++++++++++-----
arch/arm/src/rp2040/rp2040_cyw43439.c | 6 ++++--
arch/arm/src/rp2040/rp2040_flash_mtd.c | 6 ++++--
arch/arm/src/rp2040/rp2040_i2c.c | 7 +++---
arch/arm/src/rp23xx/rp23xx_adc.c | 36 +++++++++++++++++++------------
arch/arm/src/rp23xx/rp23xx_i2c.c | 5 +++--
arch/arm/src/s32k1xx/s32k1xx_flexio_i2c.c | 5 +++--
arch/arm/src/samv7/sam_timerisr.c | 1 +
arch/arm/src/stm32/stm32_eth.c | 5 +++--
arch/arm/src/stm32/stm32g4xxxx_rcc.c | 1 +
arch/arm/src/stm32f0l0g0/stm32g0_flash.c | 2 ++
arch/arm/src/stm32l5/stm32l5_pwr.h | 1 +
arch/arm/src/tiva/common/tiva_can.c | 13 +++++------
21 files changed, 84 insertions(+), 43 deletions(-)
diff --git a/arch/arm/src/cxd56xx/cxd56_i2c.c b/arch/arm/src/cxd56xx/cxd56_i2c.c
index 3ee00268897..eb5f233dda8 100644
--- a/arch/arm/src/cxd56xx/cxd56_i2c.c
+++ b/arch/arm/src/cxd56xx/cxd56_i2c.c
@@ -484,7 +484,8 @@ static int cxd56_i2c_interrupt(int irq, void *context, void
*arg)
* if the interrupt occurs when the writing request.
* Actual receiving data is in RX_FULL interrupt handler.
*
- * TODO : The argument "last" is not used.
+ * TODO : The argument "last" is not used.
+ *
****************************************************************************/
static int cxd56_i2c_receive(struct cxd56_i2cdev_s *priv, int last)
@@ -588,8 +589,9 @@ static int cxd56_i2c_send(struct cxd56_i2cdev_s *priv, int
last)
* Description:
* Perform a sequence of I2C transfers
*
- * TODO: Multiple i2c_msg_s read operations with the same address are not
- * currently guaranteed.
+ * TODO: Multiple i2c_msg_s read operations with the same address are not
+ * currently guaranteed.
+ *
****************************************************************************/
static int cxd56_i2c_transfer(struct i2c_master_s *dev,
@@ -833,7 +835,7 @@ out:
cxd56_i2c_clock_gate_enable(priv->port);
- /* Release the port for re-use by other clients */
+ /* Release the port for reuse by other clients */
nxmutex_unlock(&priv->lock);
return ret;
diff --git a/arch/arm/src/efm32/efm32_flash.c b/arch/arm/src/efm32/efm32_flash.c
index 30ef1fe92c1..9500c0078e7 100644
--- a/arch/arm/src/efm32/efm32_flash.c
+++ b/arch/arm/src/efm32/efm32_flash.c
@@ -209,6 +209,7 @@ void efm32_flash_unlock(void)
* -EBUSY - Busy timeout.
* -EINVAL - Operation tried to access a non-flash area.
* -EACCES - Operation tried to access a locked area of the flash.
+ *
****************************************************************************/
int __ramfunc__ msc_load_verify_address(uint32_t *address)
diff --git a/arch/arm/src/gd32f4/gd32f4xx_gpio.c
b/arch/arm/src/gd32f4/gd32f4xx_gpio.c
index 25dacdb35fd..4e981d05710 100644
--- a/arch/arm/src/gd32f4/gd32f4xx_gpio.c
+++ b/arch/arm/src/gd32f4/gd32f4xx_gpio.c
@@ -149,7 +149,7 @@ static void gd32_gpio_clock_enable(uint32_t port_base)
regaddr = GD32_RCU_AHB1EN;
- /* Check clock if alreay enable. */
+ /* Check clock if already enable. */
if (rcu_en != (rcu_en & getreg32(regaddr)))
{
@@ -213,6 +213,7 @@ static inline bool gd32_gpio_input_get(uint32_t port_base,
uint32_t pin)
*
* Description:
* Configure a GPIO pin as the Alternative function.
+ *
****************************************************************************/
static void gd32_gpio_af_config(uint32_t cfgset, uint32_t port_base,
@@ -246,6 +247,7 @@ static void gd32_gpio_af_config(uint32_t cfgset, uint32_t
port_base,
*
* Description:
* Configure a GPIO pin's Alternative function as reset value.
+ *
****************************************************************************/
static void gd32_gpio_af_unconfig(uint32_t cfgset, uint32_t port_base,
diff --git a/arch/arm/src/gd32f4/gd32f4xx_gpio.h
b/arch/arm/src/gd32f4/gd32f4xx_gpio.h
index 803ed1b0297..73d3e1cd145 100644
--- a/arch/arm/src/gd32f4/gd32f4xx_gpio.h
+++ b/arch/arm/src/gd32f4/gd32f4xx_gpio.h
@@ -252,6 +252,7 @@ EXTERN const uint32_t g_gpio_base[GD32_NGPIO_PORTS];
* Return value:
* OK on success
* A negated errno value on invalid port or mode.
+ *
****************************************************************************/
int gd32_gpio_config(uint32_t cfgset);
diff --git a/arch/arm/src/gd32f4/gd32f4xx_rcu.c
b/arch/arm/src/gd32f4/gd32f4xx_rcu.c
index 1b26c9a7667..434b6de017d 100644
--- a/arch/arm/src/gd32f4/gd32f4xx_rcu.c
+++ b/arch/arm/src/gd32f4/gd32f4xx_rcu.c
@@ -652,6 +652,7 @@ void gd32_rcu_ckout0_config(uint32_t src, uint32_t div)
* Description:
* Configure the CK_OUT0 clock source and divider. CK_OUT0 is connected
* to PC9. PC9 should be configured in alternate function mode.
+ *
****************************************************************************/
void gd32_rcu_ckout1_config(uint32_t src, uint32_t div)
diff --git a/arch/arm/src/gd32f4/gd32f4xx_rcu.h
b/arch/arm/src/gd32f4/gd32f4xx_rcu.h
index c6278389f7f..0064d91f98d 100644
--- a/arch/arm/src/gd32f4/gd32f4xx_rcu.h
+++ b/arch/arm/src/gd32f4/gd32f4xx_rcu.h
@@ -81,6 +81,7 @@ void gd32_clockconfig(void);
* Description:
* Configure the CK_OUT0 clock source and divider. CK_OUT0 is connected
* to PA8. PA8 should be configured in alternate function mode.
+ *
****************************************************************************/
void gd32_rcu_ckout0_config(uint32_t src, uint32_t div);
@@ -91,6 +92,7 @@ void gd32_rcu_ckout0_config(uint32_t src, uint32_t div);
* Description:
* Configure the CK_OUT0 clock source and divider. CK_OUT0 is connected
* to PC9. PC9 should be configured in alternate function mode.
+ *
****************************************************************************/
void gd32_rcu_ckout1_config(uint32_t src, uint32_t div);
diff --git a/arch/arm/src/lc823450/lc823450_mtd.c
b/arch/arm/src/lc823450/lc823450_mtd.c
index 28ac1c659ca..dc4be1b2c65 100644
--- a/arch/arm/src/lc823450/lc823450_mtd.c
+++ b/arch/arm/src/lc823450/lc823450_mtd.c
@@ -395,6 +395,7 @@ static int lc823450_ioctl(struct mtd_dev_s *dev, int cmd,
*
* Precondition:
* Semaphore has been taken.
+ *
****************************************************************************/
static int mtd_mediainitialize(struct lc823450_mtd_dev_s *dev)
@@ -504,6 +505,7 @@ exit_with_error:
*
* Precondition:
* Semaphore has been taken.
+ *
****************************************************************************/
static struct mtd_dev_s *lc823450_mtd_allocdev(uint32_t channel)
diff --git a/arch/arm/src/lc823450/lc823450_usbdev.c
b/arch/arm/src/lc823450/lc823450_usbdev.c
index 37c8746d44e..2dbb89da22d 100644
--- a/arch/arm/src/lc823450/lc823450_usbdev.c
+++ b/arch/arm/src/lc823450/lc823450_usbdev.c
@@ -1923,6 +1923,7 @@ void usbdev_msc_stop(void)
*
* return value : 0 : charger was not detected.
* !0 : charger was detected.
+ *
****************************************************************************/
int usbdev_is_usbcharger(void)
diff --git a/arch/arm/src/rp2040/rp2040_adc.c b/arch/arm/src/rp2040/rp2040_adc.c
index 67bf171e8fb..8531ae01cbc 100644
--- a/arch/arm/src/rp2040/rp2040_adc.c
+++ b/arch/arm/src/rp2040/rp2040_adc.c
@@ -42,7 +42,7 @@
*
* This lower-half supports multiple drivers (/dev/adc0, /dev/adc1, etc.)
* that each may read data from any of the ADC ports. The driver reads
- * whichever ADC ports are needed by ANY of ther drivers in strict
+ * whichever ADC ports are needed by ANY of the drivers in strict
* round-robin fashion, passing the converted values to the drivers that
* needed it. Data is only passed if the driver is open.
*
@@ -50,7 +50,7 @@
*
* This code reads the ADC ports at full speed. At the time this comment
* was written, the upper-half will throw away any converted values it
- * receives when the buffer is full; therefor, if the data is not read
+ * receives when the buffer is full; therefore, if the data is not read
* for a while, the returned values may be stale when finally read. You
* can use the ANIOC_RESET_FIFO ioctl call to flush this stale data.
****************************************************************************/
@@ -130,7 +130,7 @@ static int my_ioctl(struct adc_dev_s *dev, int cmd,
unsigned long arg);
static const struct adc_ops_s g_adcops =
{
.ao_bind = my_bind, /* Called first during initialization. */
- .ao_reset = my_reset, /* Called second during intialization. */
+ .ao_reset = my_reset, /* Called second during initialization. */
.ao_setup = my_setup, /* Called during first open. */
.ao_shutdown = my_shutdown, /* Called during last close. */
.ao_rxint = my_rxint, /* Called to enable/disable interrupts. */
@@ -159,6 +159,7 @@ static uint8_t g_active_count = 0;
* all ADC devices.
*
* Note: This is called from inside an interrupt service routine.
+ *
****************************************************************************/
static int interrupt_handler(int irq, void *context, void *arg)
@@ -239,6 +240,7 @@ static int interrupt_handler(int irq, void *context, void
*arg)
* the conversion.
*
* Note: This is called from inside a critical section.
+ *
****************************************************************************/
static void get_next_channel(void)
@@ -321,6 +323,7 @@ static void get_next_channel(void)
* It also makes sure ADC reads are taking place
*
* Note: This is called from inside a critical section.
+ *
****************************************************************************/
static void add_device(struct adc_dev_s *dev)
@@ -378,6 +381,7 @@ static void add_device(struct adc_dev_s *dev)
* This function is called to unlink the device from the device list.
*
* Note: This is called from inside a critical section.
+ *
****************************************************************************/
void remove_device(struct adc_dev_s *dev)
@@ -483,6 +487,7 @@ static void my_reset(struct adc_dev_s *dev)
* We don't do anything here.
*
* Note: This is called from inside a critical section.
+ *
****************************************************************************/
static int my_setup(struct adc_dev_s *dev)
@@ -517,6 +522,7 @@ static int my_setup(struct adc_dev_s *dev)
* more devices are active.
*
* Note: This is called from inside a critical section.
+ *
****************************************************************************/
static void my_shutdown(struct adc_dev_s *dev)
@@ -534,7 +540,8 @@ static void my_shutdown(struct adc_dev_s *dev)
* Description:
* Call to enable or disable ADC RX interrupts
*
- * Note: This is called from inside a critical section.
+ * Note: This is called from inside a critical section.
+ *
****************************************************************************/
static void my_rxint(struct adc_dev_s *dev, bool enable)
@@ -557,7 +564,7 @@ static void my_rxint(struct adc_dev_s *dev, bool enable)
* Name: my_ioctl
*
* Description:
- * All ioctl calls will be routed through this method
+ * All ioctl calls will be routed through this method
*
****************************************************************************/
diff --git a/arch/arm/src/rp2040/rp2040_cyw43439.c
b/arch/arm/src/rp2040/rp2040_cyw43439.c
index 3d91b0c06d6..f32d04f5187 100644
--- a/arch/arm/src/rp2040/rp2040_cyw43439.c
+++ b/arch/arm/src/rp2040/rp2040_cyw43439.c
@@ -78,7 +78,7 @@ typedef struct dma_info_s
* to one less than the total number of BITS to be transmitted.
*
* The Y register is the input bit count register. It too must be set
- * to one less thant the total number of bits to be read.
+ * to one less than the total number of bits to be read.
*
* The PIO's state machine is set up to auto-pull data from the input
* fifo whenever the output shift register is empty. This happens at
@@ -640,7 +640,7 @@ static int my_read(struct gspi_dev_s *gspi,
* word we set X to 31.
*
* We load Y with the number of bits to read. This is based on the
- * byte count in "length" which we round up to a 32-bit boundry so the
+ * byte count in "length" which we round up to a 32-bit boundary so the
* pio program will be sure to autopush the final data to the output fifo.
*
* This is slightly magical. The way we load the X is to first
@@ -775,6 +775,7 @@ static int my_read(struct gspi_dev_s *gspi,
*
* Description:
* Initialize the cyw43439 private data and PIO communication.
+ *
****************************************************************************/
gspi_dev_t *rp2040_cyw_setup(uint8_t gpio_on,
@@ -853,6 +854,7 @@ gspi_dev_t *rp2040_cyw_setup(uint8_t gpio_on,
*
* Description:
* Deinitialize the cyw43439 PIO communication.
+ *
****************************************************************************/
void rp2040_cyw_remove(gspi_dev_t *gspi)
diff --git a/arch/arm/src/rp2040/rp2040_flash_mtd.c
b/arch/arm/src/rp2040/rp2040_flash_mtd.c
index ba134a56d2e..6cced7f272e 100644
--- a/arch/arm/src/rp2040/rp2040_flash_mtd.c
+++ b/arch/arm/src/rp2040/rp2040_flash_mtd.c
@@ -496,8 +496,10 @@ static int rp2040_flash_ioctl(struct mtd_dev_s *dev,
/****************************************************************************
* Name: rp2040_flash_initialize
*
- * Description: Bind a block mode driver that uses the built-in rp2040
- * flash programming commands for read/write access to unused flash.
+ * Description:
+ * Bind a block mode driver that uses the built-in rp2040
+ * flash programming commands for read/write access to unused flash.
+ *
****************************************************************************/
struct mtd_dev_s *rp2040_flash_mtd_initialize(void)
diff --git a/arch/arm/src/rp2040/rp2040_i2c.c b/arch/arm/src/rp2040/rp2040_i2c.c
index 54a680297e7..60c4da2bf5f 100644
--- a/arch/arm/src/rp2040/rp2040_i2c.c
+++ b/arch/arm/src/rp2040/rp2040_i2c.c
@@ -513,8 +513,9 @@ static int rp2040_i2c_send(struct rp2040_i2cdev_s *priv,
int last)
* Description:
* Perform a sequence of I2C transfers
*
- * TODO: Multiple i2c_msg_s read operations with the same address are not
- * currently guaranteed.
+ * TODO: Multiple i2c_msg_s read operations with the same address are not
+ * currently guaranteed.
+ *
****************************************************************************/
static int rp2040_i2c_transfer(struct i2c_master_s *dev,
@@ -756,7 +757,7 @@ out:
out_without_reinit:
- /* Release the port for re-use by other clients */
+ /* Release the port for reuse by other clients */
nxmutex_unlock(&priv->lock);
return ret;
diff --git a/arch/arm/src/rp23xx/rp23xx_adc.c b/arch/arm/src/rp23xx/rp23xx_adc.c
index f7914c7b2cd..b3d694ec731 100644
--- a/arch/arm/src/rp23xx/rp23xx_adc.c
+++ b/arch/arm/src/rp23xx/rp23xx_adc.c
@@ -42,7 +42,7 @@
*
* This lower-half supports multiple drivers (/dev/adc0, /dav/dca1, etc.)
* that each may read data from any of the ADC ports. The driver reads
- * whichever ADC ports are needed by ANY of ther drivers in strict
+ * whichever ADC ports are needed by ANY of the drivers in strict
* round-robin fashion, passing the converted values to the drivers that
* needed it. Data is only passed if the driver is open.
*
@@ -50,7 +50,7 @@
*
* This code reads the ADC ports at full speed. At the time this comment
* was written, the upper-half will throw away any converted values it
- * receives when the buffer is full; therefor, if the data is not read
+ * receives when the buffer is full; therefore, if the data is not read
* for a while, the returned values may be stale when finally read. You
* can use the ANIOC_RESET_FIFO ioctl call to flush this stale data.
****************************************************************************/
@@ -134,7 +134,7 @@ static int my_ioctl(struct adc_dev_s *dev, int cmd,
unsigned long arg);
static const struct adc_ops_s g_adcops =
{
.ao_bind = my_bind, /* Called first during initialization. */
- .ao_reset = my_reset, /* Called second during intialization. */
+ .ao_reset = my_reset, /* Called second during initialization. */
.ao_setup = my_setup, /* Called during first open. */
.ao_shutdown = my_shutdown, /* Called during last close. */
.ao_rxint = my_rxint, /* Called to enable/disable interrupts. */
@@ -162,7 +162,8 @@ static uint8_t g_active_count = 0;
* ADC interrupt handler. Note that this one handler is shared between
* all ADC devices.
*
- * Note: This is called from inside an interrupt service routine.
+ * Note: This is called from inside an interrupt service routine.
+ *
****************************************************************************/
static int interrupt_handler(int irq, void *context, void *arg)
@@ -242,7 +243,8 @@ static int interrupt_handler(int irq, void *context, void
*arg)
* Update g_current_channel to point to next channel in use and start
* the conversion.
*
- * Note: This is called from inside a critical section.
+ * Note: This is called from inside a critical section.
+ *
****************************************************************************/
static void get_next_channel(void)
@@ -324,7 +326,8 @@ static void get_next_channel(void)
* This function is called to link the device int the device list.
* It also makes sure ADC reads are taking place
*
- * Note: This is called from inside a critical section.
+ * Note: This is called from inside a critical section.
+ *
****************************************************************************/
static void add_device(struct adc_dev_s *dev)
@@ -381,7 +384,8 @@ static void add_device(struct adc_dev_s *dev)
* Description:
* This function is called to unlink the device from the device list.
*
- * Note: This is called from inside a critical section.
+ * Note: This is called from inside a critical section.
+ *
****************************************************************************/
void remove_device(struct adc_dev_s *dev)
@@ -486,7 +490,8 @@ static void my_reset(struct adc_dev_s *dev)
*
* We don't do anything here.
*
- * Note: This is called from inside a critical section.
+ * Note: This is called from inside a critical section.
+ *
****************************************************************************/
static int my_setup(struct adc_dev_s *dev)
@@ -516,11 +521,12 @@ static int my_setup(struct adc_dev_s *dev)
* Name: my_shutdown
*
* Description:
- * This is called to shutdown an ADC device. It unlinks the
- * device from out local chain and turns off ADC interrupts if no
- * more devices are active.
+ * This is called to shutdown an ADC device. It unlinks the
+ * device from out local chain and turns off ADC interrupts if no
+ * more devices are active.
+ *
+ * Note: This is called from inside a critical section.
*
- * Note: This is called from inside a critical section.
****************************************************************************/
static void my_shutdown(struct adc_dev_s *dev)
@@ -538,7 +544,8 @@ static void my_shutdown(struct adc_dev_s *dev)
* Description:
* Call to enable or disable ADC RX interrupts
*
- * Note: This is called from inside a critical section.
+ * Note: This is called from inside a critical section.
+ *
****************************************************************************/
static void my_rxint(struct adc_dev_s *dev, bool enable)
@@ -561,7 +568,7 @@ static void my_rxint(struct adc_dev_s *dev, bool enable)
* Name: my_ioctl
*
* Description:
- * All ioctl calls will be routed through this method
+ * All ioctl calls will be routed through this method
*
****************************************************************************/
@@ -599,6 +606,7 @@ static int my_ioctl(struct adc_dev_s *dev,
* Returned Value:
* An opaque pointer that can be passed to rp23xx_adc_release on
* success or NULL (with errno set) on failure
+ *
****************************************************************************/
int rp23xx_adc_setup(const char *path,
diff --git a/arch/arm/src/rp23xx/rp23xx_i2c.c b/arch/arm/src/rp23xx/rp23xx_i2c.c
index 276c518c909..65573624ca8 100644
--- a/arch/arm/src/rp23xx/rp23xx_i2c.c
+++ b/arch/arm/src/rp23xx/rp23xx_i2c.c
@@ -396,7 +396,8 @@ static int rp23xx_i2c_interrupt(int irq, void *context,
void *arg)
* if the interrupt occurs when the writing request.
* Actual receiving data is in RX_FULL interrupt handler.
*
- * TODO : The argument "last" is not used.
+ * TODO : The argument "last" is not used.
+ *
****************************************************************************/
static int rp23xx_i2c_receive(struct rp23xx_i2cdev_s *priv, int last)
@@ -757,7 +758,7 @@ out:
out_without_reinit:
- /* Release the port for re-use by other clients */
+ /* Release the port for reuse by other clients */
nxmutex_unlock(&priv->lock);
return ret;
diff --git a/arch/arm/src/s32k1xx/s32k1xx_flexio_i2c.c
b/arch/arm/src/s32k1xx/s32k1xx_flexio_i2c.c
index 35070dba105..daffa1f64d6 100644
--- a/arch/arm/src/s32k1xx/s32k1xx_flexio_i2c.c
+++ b/arch/arm/src/s32k1xx/s32k1xx_flexio_i2c.c
@@ -661,8 +661,9 @@ int s32k1xx_flexio_i2cbus_uninitialize(struct i2c_master_s
*dev)
* Description:
* Perform a sequence of I2C transfers
*
- * TODO: Multiple i2c_msg_s read operations with the same address are not
- * currently guaranteed.
+ * TODO: Multiple i2c_msg_s read operations with the same address are not
+ * currently guaranteed.
+ *
****************************************************************************/
static int s32k1xx_flexio_i2c_transfer(struct i2c_master_s *dev,
diff --git a/arch/arm/src/samv7/sam_timerisr.c
b/arch/arm/src/samv7/sam_timerisr.c
index 5d8705b1dd3..6e0f0dfa6e4 100644
--- a/arch/arm/src/samv7/sam_timerisr.c
+++ b/arch/arm/src/samv7/sam_timerisr.c
@@ -110,6 +110,7 @@ static int sam_timerisr(int irq, uint32_t *regs, void *arg)
*
* Assumptions:
* Called from within critical section or interrupt context.
+ *
****************************************************************************/
#ifdef CONFIG_CLOCK_ADJTIME
diff --git a/arch/arm/src/stm32/stm32_eth.c b/arch/arm/src/stm32/stm32_eth.c
index 591b84cb406..a38d0408f73 100644
--- a/arch/arm/src/stm32/stm32_eth.c
+++ b/arch/arm/src/stm32/stm32_eth.c
@@ -1546,7 +1546,7 @@ static int stm32_recvframe(struct stm32_ethmac_s *priv)
* 3) All of the TX descriptors are in flight.
*
* This last case is obscure. It is due to that fact that each packet
- * that we receive can generate an unstoppable transmisson. So we have
+ * that we receive can generate an unstoppable transmission. So we have
* to stop receiving when we can not longer transmit. In this case, the
* transmit logic should also have disabled further RX interrupts.
*/
@@ -1814,7 +1814,7 @@ static void stm32_receive(struct stm32_ethmac_s *priv)
}
/* We are finished with the RX buffer. NOTE: If the buffer is
- * re-used for transmission, the dev->d_buf field will have been
+ * reused for transmission, the dev->d_buf field will have been
* nullified.
*/
@@ -4398,6 +4398,7 @@ int up_rtc_settime(const struct timespec *tp)
*
* Assumptions:
* Called from within a critical section.
+ *
****************************************************************************/
int up_rtc_adjtime(long ppb)
diff --git a/arch/arm/src/stm32/stm32g4xxxx_rcc.c
b/arch/arm/src/stm32/stm32g4xxxx_rcc.c
index ed213cb0c1f..3c760114d35 100644
--- a/arch/arm/src/stm32/stm32g4xxxx_rcc.c
+++ b/arch/arm/src/stm32/stm32g4xxxx_rcc.c
@@ -753,6 +753,7 @@ static inline bool stm32_rcc_enablepll(void)
* Pre-conditions:
* rcc_reset() and rcc_resetbkp() have been called and the HSI is
* the MCU's SYSCLK.
+ *
****************************************************************************/
static void stm32_stdclockconfig(void)
diff --git a/arch/arm/src/stm32f0l0g0/stm32g0_flash.c
b/arch/arm/src/stm32f0l0g0/stm32g0_flash.c
index c99b7df949b..e32010190dd 100644
--- a/arch/arm/src/stm32f0l0g0/stm32g0_flash.c
+++ b/arch/arm/src/stm32f0l0g0/stm32g0_flash.c
@@ -410,6 +410,7 @@ static void flash_lock_opt(void)
*
* -EFAULT: Block number provided falls outside of the ranges specified in
* reference manual.
+ *
****************************************************************************/
static int flash_verify_blocknum(size_t block)
@@ -451,6 +452,7 @@ static int flash_verify_blocknum(size_t block)
* This function assumes the block number has already been verified. Take
* care to make sure the block number is valid for the specific chip using
* flash_verify_blocknum() first.
+ *
****************************************************************************/
static uint32_t flash_block_address(size_t block)
diff --git a/arch/arm/src/stm32l5/stm32l5_pwr.h
b/arch/arm/src/stm32l5/stm32l5_pwr.h
index 304c7389d98..611eaf8e001 100644
--- a/arch/arm/src/stm32l5/stm32l5_pwr.h
+++ b/arch/arm/src/stm32l5/stm32l5_pwr.h
@@ -120,6 +120,7 @@ bool stm32l5_pwr_enableusv(bool set);
*
* Returned Value:
* True: The bit was previously set.
+ *
****************************************************************************/
bool stm32l5_pwr_vddio2_valid(bool set);
diff --git a/arch/arm/src/tiva/common/tiva_can.c
b/arch/arm/src/tiva/common/tiva_can.c
index 581c3fa3735..a61897d48f8 100644
--- a/arch/arm/src/tiva/common/tiva_can.c
+++ b/arch/arm/src/tiva/common/tiva_can.c
@@ -79,7 +79,7 @@
* not by the mailbox used to send the remote frame. (The Tiva hardware uses
* the mailbox with the lowest number first.)
*
- * This number is zero-indexed, althought the Command Request Register isn't.
+ * This number is zero-indexed, although the Command Request Register isn't.
*/
#define TIVA_CAN_TX_FIFO_START (TIVA_CAN_NUM_MBOXES -
CONFIG_TIVA_CAN_TX_FIFO_DEPTH)
@@ -355,7 +355,7 @@ static void tivacan_reset(struct can_dev_s *dev)
#endif
if (modnum > 1)
{
- canerr("ERROR: tried to reset nonexistant module CAN%d\n",
+ canerr("ERROR: tried to reset nonexistent module CAN%d\n",
canmod->modnum);
}
@@ -390,6 +390,7 @@ static void tivacan_reset(struct can_dev_s *dev)
*
* Returned value:
* Zero on success, or a negated errno on failure.
+ *
****************************************************************************/
static int tivacan_setup(struct can_dev_s *dev)
@@ -952,14 +953,14 @@ static int tivacan_ioctl(struct can_dev_s *dev, int cmd,
case CANIOC_SET_BITTIMING:
{
- /* REVIST: This is VERY crude--there's no guarantees that rounding
+ /* REVISIT: This is VERY crude-there's no guarantees that rounding
* won't cause problems with the prescaler selection.
- * However, NuttX's interface here is kinda sub-optimal anyway--
+ * However, NuttX's interface here is kinda sub-optimal anyway
* the choice of TSEG1, TSEG2, and SJW depend on the system clock
* and the prescaler value, so there should be an ioctl for
* the driver to take physical parameters like delay time and
* crystal frequency tolerances into account and calculate the
- * timing parameters automagically... This could be implemented
+ * timing parameters automagically. This could be implemented
* in the upper half driver.
*/
@@ -1082,7 +1083,7 @@ static int tivacan_ioctl(struct can_dev_s *dev, int cmd,
{
/* RX default fifo pointer removed when a filter is added. Do not
* allow filters to be "removed" before they're added. Also do not
- * allow unusued filter FIFOs to be added.
+ * allow unused filter FIFOs to be added.
*/
if (arg < 0
