This is an automated email from the ASF dual-hosted git repository.
linguini pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/nuttx.git
The following commit(s) were added to refs/heads/master by this push:
new 0a76e9fe8a1 arch\xtensa: Fix Kconfig style
0a76e9fe8a1 is described below
commit 0a76e9fe8a1400e80149de0ff27c7dd80bcb193c
Author: simbit18 <[email protected]>
AuthorDate: Thu Mar 26 13:17:00 2026 +0100
arch\xtensa: Fix Kconfig style
- Remove spaces from Kconfig
- Add TABs
- Add comments
Signed-off-by: simbit18 <[email protected]>
---
arch/xtensa/src/esp32s3/Kconfig | 71 +++++++++++++++++++++--------------------
1 file changed, 36 insertions(+), 35 deletions(-)
diff --git a/arch/xtensa/src/esp32s3/Kconfig b/arch/xtensa/src/esp32s3/Kconfig
index 3906fd80cb6..d6679ffed8b 100644
--- a/arch/xtensa/src/esp32s3/Kconfig
+++ b/arch/xtensa/src/esp32s3/Kconfig
@@ -2344,7 +2344,7 @@ config ESPRESSIF_ADC_1_ATTEN_6
config ESPRESSIF_ADC_1_ATTEN_12
bool "12 dB (4.4 V)"
-endchoice # ESPRESSIF_ADC_1_ATTENUATION
+endchoice # ESPRESSIF_ADC_1_ATTENUATION
config ESPRESSIF_ADC_1_ATTENUATION
int
@@ -2365,7 +2365,7 @@ config ESPRESSIF_ADC_1_MODE_ONE_SHOT
config ESPRESSIF_ADC_1_MODE_CONTINUOUS
bool "Continuous Mode"
-endchoice # ESPRESSIF_ADC_1_MODE
+endchoice # ESPRESSIF_ADC_1_MODE
menu "ADC 1 Channel Selection"
@@ -2506,9 +2506,9 @@ config ESPRESSIF_ADC_2_CH9
endmenu # ADC 2 Channel Selection
-endif # ESPRESSIF_ADC_2
+endif # ESPRESSIF_ADC_2
-endmenu # ADC Configuration
+endmenu # ADC Configuration
menu "USB OTG Configuration"
depends on ESP32S3_OTG
@@ -2626,7 +2626,7 @@ config ESP32S3_LCD_DATA15_PIN
int "LCD Parallel Output Data Bit-15 Pin"
default 1
-endmenu
+endmenu # LCD Pin Configuration
menu "LCD Display Configuration"
depends on ESP32S3_LCD
@@ -2687,66 +2687,66 @@ config ESP32S3_LCD_DATA_16BIT
endchoice # LCD Data Width
-endmenu
+endmenu # LCD Display Configuration
config ESP32S3_LCD_REGDEBUG
bool "LCD Debug Registers"
default n
-endmenu
+endmenu # LCD Controller Configuration
menu "Camera (DVP) Configuration"
- depends on ESP32S3_CAM
+ depends on ESP32S3_CAM
config ESP32S3_CAM_XCLK_PIN
- int "CAM XCLK Output Pin"
- default 5
+ int "CAM XCLK Output Pin"
+ default 5
config ESP32S3_CAM_PCLK_PIN
- int "CAM PCLK Input Pin"
- default 7
+ int "CAM PCLK Input Pin"
+ default 7
config ESP32S3_CAM_VSYNC_PIN
- int "CAM VSYNC Input Pin"
- default 3
+ int "CAM VSYNC Input Pin"
+ default 3
config ESP32S3_CAM_HREF_PIN
- int "CAM HREF Input Pin"
- default 46
+ int "CAM HREF Input Pin"
+ default 46
config ESP32S3_CAM_D0_PIN
- int "CAM Data Bit-0 Pin"
- default 16
+ int "CAM Data Bit-0 Pin"
+ default 16
config ESP32S3_CAM_D1_PIN
- int "CAM Data Bit-1 Pin"
- default 18
+ int "CAM Data Bit-1 Pin"
+ default 18
config ESP32S3_CAM_D2_PIN
- int "CAM Data Bit-2 Pin"
- default 8
+ int "CAM Data Bit-2 Pin"
+ default 8
config ESP32S3_CAM_D3_PIN
- int "CAM Data Bit-3 Pin"
- default 17
+ int "CAM Data Bit-3 Pin"
+ default 17
config ESP32S3_CAM_D4_PIN
- int "CAM Data Bit-4 Pin"
- default 15
+ int "CAM Data Bit-4 Pin"
+ default 15
config ESP32S3_CAM_D5_PIN
- int "CAM Data Bit-5 Pin"
- default 6
+ int "CAM Data Bit-5 Pin"
+ default 6
config ESP32S3_CAM_D6_PIN
- int "CAM Data Bit-6 Pin"
- default 4
+ int "CAM Data Bit-6 Pin"
+ default 4
config ESP32S3_CAM_D7_PIN
- int "CAM Data Bit-7 Pin"
- default 9
+ int "CAM Data Bit-7 Pin"
+ default 9
-endmenu
+endmenu # Camera (DVP) Configuration
menu "SD/MMC Configuration"
@@ -2799,7 +2799,8 @@ config ESP32S3_SDMMC_D3
depends on ESP32S3_SDMMC
depends on !SDIO_WIDTH_D1_ONLY
default 42
-endmenu
+
+endmenu # SD/MMC Configuration
menu "Bootloader and Image Configuration"
@@ -2849,7 +2850,7 @@ config ESP32S3_ESPTOOL_TARGET_SECONDARY
This is the choice most suitable for the development and
verification
of a secure firmware update workflow.
-endchoice
+endchoice # Target slot for image flashing
config ESP32S3_MCUBOOT_VERSION
string "MCUboot version"
