v01d commented on a change in pull request #1675: URL: https://github.com/apache/incubator-nuttx/pull/1675#discussion_r483828605
########## File path: Documentation/quickstart/quickstart.rst ########## @@ -0,0 +1,110 @@ +.. include:: /substitutions.rst +.. _quickstart: + +Quickstart +========== + +Here's the quick version of getting started with NuttX. This is a bare-bones outline for experienced developers– if it's +going too quickly, dive into the following sections. This Quickstart guide assumes you're on a Linux +computer, you're using an ARM microcontroller on your embedded board, and you're familiar with using the command line. + +#. Install a Cross-Compiler Toolchain + + With NuttX, you compile the operating system and your application on your desktop or laptop computer, then install the + binary file on your embedded computer. This guide assumes your computer is an + `ARM <https://en.wikipedia.org/wiki/ARM_architecture>`_ CPU. If it isn't, you'll need a different tool chain. + + You can download a toolchain from + `ARM Embedded Gnu Toolchain <https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm>`_ + for your embedded processor's CPU. You can also use a toolchain shipped with your OS for the `none-eabi` target, such as `gcc-arm-none-eabi` in Linux. + + +In the following example, we download ``gcc-arm-none-eabi`` version 9.0 and unpack it into ``/opt/gcc`: + + .. code-block:: console + + $ sudo mkdir /opt/gcc + $ sudo chgrp -R users /opt/gcc + $ cd /opt/gcc + $ wget https://developer.arm.com/-/media/Files/downloads/gnu-rm/9-2019q4/gcc-arm-none-eabi-9-2019-q4-major-x86_64-linux.tar.bz2 + $ tar xf gcc-arm-none-eabi-9-2019-q4-major-x86_64-linux.tar.bz2 + +Then, add the toolchain ``bin/`` directory to your path: + +.. code-block:: console + + $ echo "export PATH=/opt/gcc/gcc-arm-none-eabi-9-2019-q4-major/bin:$PATH" >> ~/.bashrc + +If you are using any other shell, the procedure is similar by editing the corresponding rc file. + +#. Download Apache NuttX +The next step is to download NuttX main repository along the application repository. The latter is technically optional in a very minimal configurations but should be included in normal configuration since it includes the NuttX shell. + .. code-block:: console + + $ mkdir nuttx + $ cd nuttx + $ git clone https://github.com/apache/incubator-nuttx.git nuttx Review comment: Ok, we'll deal with this later. I'll resolve this conversation. ---------------------------------------------------------------- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. For queries about this service, please contact Infrastructure at: [email protected]
