This is an automated email from the ASF dual-hosted git repository. xiaoxiang781216 pushed a commit to branch master in repository https://gitbox.apache.org/repos/asf/nuttx-apps.git
commit b62cec9eb1d698004c1bd191202d3e7d49254baf Author: Jorge Guzman <[email protected]> AuthorDate: Thu Jul 30 18:46:11 2026 -0300 system/kbd: inject keys into a uinput keyboard Somebody porting a board has to work on the application side before the keyboard driver exists, and somebody reviewing that work often does not have the board at hand at all. With -i the tool goes the other way and writes into a uinput keyboard, either what it reads from its own stdin or every key of another keyboard. So an application reading /dev/ukeyboard is driven from the serial console, or from whatever is on the far end of it, and a real keyboard and an injected one can drive it at the same time, which neither can do on its own since an application opens a single device. Nothing in the application changes: it is reading a keyboard like any other, which is the point. Validated on a Linum STM32H753BI, forwarding a USB HID keyboard and the serial console into the same virtual keyboard, with the LVGL terminal reading it. 24 press and release pairs survived the crossing with no duplicate, no orphan and three keys held at once. Signed-off-by: Jorge Guzman <[email protected]> --- system/kbd/kbd_main.c | 221 ++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 216 insertions(+), 5 deletions(-) diff --git a/system/kbd/kbd_main.c b/system/kbd/kbd_main.c index a736dd85c..20851077b 100644 --- a/system/kbd/kbd_main.c +++ b/system/kbd/kbd_main.c @@ -31,6 +31,13 @@ * built with INPUT_KEYBOARD_BYTESTREAM, in which case it delivers the byte * stream that the keyboard codec defines. This follows that setting rather * than having a switch of its own. + * + * With -i it goes the other way and injects into a uinput keyboard, either + * what it reads from its own stdin or every key of another keyboard. So an + * application can be driven from a serial console with no keyboard hardware + * at all, and a real keyboard and an injected one can drive it at the same + * time, which neither can do on its own since an application opens a single + * device. */ /**************************************************************************** @@ -45,6 +52,7 @@ #include <errno.h> #include <fcntl.h> #include <inttypes.h> +#include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <string.h> @@ -178,6 +186,157 @@ static size_t kbd_dump(FAR char *buffer, size_t nbytes) } #endif +/**************************************************************************** + * Name: kbd_inject + * + * Description: + * Turn each byte read from stdin into a key press and release on the + * given device. The device has to be a uinput keyboard: a real one has + * nothing to inject into. + * + * Note that this always writes struct keyboard_event_s. Injection goes + * through the lower half write method, which is not affected by + * INPUT_KEYBOARD_BYTESTREAM. + * + * Returned Value: + * The number of keys injected. + * + ****************************************************************************/ + +static bool kbd_emit(int fd, uint32_t code, uint32_t type) +{ + struct keyboard_event_s key; + + key.code = code; + key.type = type; + + if (write(fd, &key, sizeof(key)) != (ssize_t)sizeof(key)) + { + fprintf(stderr, "kbd: inject failed: %d\n", errno); + return false; + } + + return true; +} + +static size_t kbd_inject(int fd) +{ + unsigned char buf[KBD_READ_SIZE]; + uint32_t code; + ssize_t nread; + ssize_t i; + size_t nkeys = 0; + + for (; ; ) + { + nread = read(STDIN_FILENO, buf, sizeof(buf)); + if (nread <= 0) + { + break; + } + + for (i = 0; i < nread; i++) + { + /* A terminal sends a carriage return where a keyboard would + * send a line feed. + */ + + code = (buf[i] == '\r') ? '\n' : buf[i]; + + if (!kbd_emit(fd, code, KEYBOARD_PRESS)) + { + return nkeys; + } + + kbd_emit(fd, code, KEYBOARD_RELEASE); + nkeys++; + } + } + + return nkeys; +} + +/**************************************************************************** + * Name: kbd_forward + * + * Description: + * Copy every key from one keyboard onto another. Pointing an + * application at the destination lets a real keyboard and an injected one + * drive it at the same time, which neither can do on its own since an + * application opens a single device. + * + * Returned Value: + * The number of keys forwarded. + * + ****************************************************************************/ + +static size_t kbd_forward(int fd, int srcfd) +{ + char buf[KBD_READ_SIZE]; + ssize_t nread; + size_t nkeys = 0; +#ifdef CONFIG_INPUT_KEYBOARD_BYTESTREAM + struct lib_meminstream_s stream; + struct kbd_getstate_s state; + uint8_t ch; + int ret; +#else + FAR struct keyboard_event_s *key; +#endif + + for (; ; ) + { + nread = read(srcfd, buf, sizeof(buf)); + if (nread <= 0) + { + break; + } + +#ifdef CONFIG_INPUT_KEYBOARD_BYTESTREAM + + /* The source speaks the byte stream and the destination only takes + * events, so this decodes rather than copies. The decoder returns + * the event type directly. + */ + + memset(&state, 0, sizeof(state)); + lib_meminstream(&stream, buf, nread); + + for (; ; ) + { + ret = kbd_decode(&stream.common, &state, &ch); + if (ret == KBD_ERROR) + { + break; + } + + if (!kbd_emit(fd, ch, ret)) + { + return nkeys; + } + + nkeys++; + } +#else + key = (FAR struct keyboard_event_s *)buf; + + while (nread >= (ssize_t)sizeof(struct keyboard_event_s)) + { + if (!kbd_emit(fd, key->code, key->type)) + { + return nkeys; + } + + nread -= sizeof(struct keyboard_event_s); + key++; + nkeys++; + } +#endif + } + + return nkeys; +} + /**************************************************************************** * Public Functions ****************************************************************************/ @@ -189,20 +348,41 @@ static size_t kbd_dump(FAR char *buffer, size_t nbytes) int main(int argc, FAR char *argv[]) { FAR const char *devpath = CONFIG_SYSTEM_KBD_DEVPATH; + FAR const char *srcpath = NULL; char buffer[KBD_READ_SIZE]; + bool inject = false; size_t nkeys = 0; size_t limit = 0; ssize_t nbytes; + int argi = 1; + int srcfd; int fd; - if (argc > 1) + if (argi < argc && strcmp(argv[argi], "-i") == 0) + { + inject = true; + argi++; + } + + if (argi < argc) { - devpath = argv[1]; + devpath = argv[argi++]; } - if (argc > 2) + if (argi < argc) { - limit = strtoul(argv[2], NULL, 10); + /* When injecting, the extra argument is the keyboard to forward from + * rather than a count: there is nothing to count. + */ + + if (inject) + { + srcpath = argv[argi]; + } + else + { + limit = strtoul(argv[argi], NULL, 10); + } } /* Wait for the device. A USB keyboard appears when it is plugged in, so @@ -211,7 +391,7 @@ int main(int argc, FAR char *argv[]) for (; ; ) { - fd = open(devpath, O_RDONLY); + fd = open(devpath, (inject ? O_WRONLY : O_RDONLY) | O_CLOEXEC); if (fd >= 0) { break; @@ -222,6 +402,36 @@ int main(int argc, FAR char *argv[]) sleep(3); } + if (inject) + { + if (srcpath == NULL) + { + printf("kbd: injecting into %s, type to send, Ctrl-D to stop\n", + devpath); + fflush(stdout); + + nkeys = kbd_inject(fd); + } + else + { + srcfd = open(srcpath, O_RDONLY | O_CLOEXEC); + if (srcfd < 0) + { + fprintf(stderr, "kbd: open %s failed: %d\n", srcpath, errno); + close(fd); + return EXIT_FAILURE; + } + + printf("kbd: forwarding %s into %s\n", srcpath, devpath); + fflush(stdout); + + nkeys = kbd_forward(fd, srcfd); + close(srcfd); + } + + goto done; + } + printf("kbd: reading %s, %s\n", devpath, #ifdef CONFIG_INPUT_KEYBOARD_BYTESTREAM "byte stream" @@ -259,6 +469,7 @@ int main(int argc, FAR char *argv[]) } } +done: close(fd); printf("kbd: %zu keys\n", nkeys); return EXIT_SUCCESS;
