JorgeGzm opened a new pull request, #20767: URL: https://github.com/apache/nuttx/pull/20767
## Summary The GD32VW553K-START LEDs are on PB0 (red), PA12 (green) and PB4 (blue), not PC0-PC2. PB0 was also the I2C0 fallback SCL used when SPI is on, so that fallback moves to PB15 (SCL) / PA8 (SDA). ADC_IN8 (PB0) is now routed only when the LEDs are not in use. The board documentation is updated to match. ## Impact Only the `gd32vw553k-start` board changes. In `periph`, I2C0 moves from PB0/PB1 to PB15/PA8. No Kconfig or defconfig changes. ## Testing Build and flash (`periph`, J-Link over JTAG): ``` $ ./tools/configure.sh -l gd32vw553k-start:periph $ make -j ``` On the board, the `leds` example cycles the three LEDs (red, green, blue): ``` nsh> leds & led_daemon: Opening /dev/userleds led_daemon: Supported LEDs 0x07 ... led_daemon: LED set 0x05 led_daemon: LED set 0x04 led_daemon: LED set 0x03 led_daemon: LED set 0x02 led_daemon: LED set 0x01 led_daemon: LED set 0x00 led_daemon: LED set 0x01 led_daemon: LED set 0x02 led_daemon: LED set 0x03 led_daemon: LED set 0x04 ``` -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
