This is an automated email from the ASF dual-hosted git repository.

xiaoxiang781216 pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/nuttx.git

commit 6ded4d2bc78f695710486b5c74462d6c599c9dcd
Author: Hoa Bui <[email protected]>
AuthorDate: Wed Nov 11 09:45:01 2026 +0000

    boards/arm/rzv2h: Add Renesas RZV2H-EVK and RZV2H-RDK board support
    
    Add board support for the Renesas RZV2H-EVK and RZV2H-RDK boards
    
    Signed-off-by: Hoa Bui <[email protected]>
    Signed-off-by: Binh Nguyen <[email protected]>
---
 boards/Kconfig                                     |  22 ++
 boards/arm/rzv2h/rzv2h-evk/CMakeLists.txt          |  23 ++
 boards/arm/rzv2h/rzv2h-evk/Kconfig                 |  22 ++
 .../arm/rzv2h/rzv2h-evk/configs/nsh-leds/defconfig |  52 ++++
 boards/arm/rzv2h/rzv2h-evk/configs/nsh/defconfig   |  52 ++++
 boards/arm/rzv2h/rzv2h-evk/include/board.h         | 151 +++++++++
 boards/arm/rzv2h/rzv2h-evk/scripts/Make.defs       |  98 ++++++
 .../arm/rzv2h/rzv2h-evk/scripts/rzv2h-evk_cr8_0.ld | 224 ++++++++++++++
 boards/arm/rzv2h/rzv2h-evk/src/CMakeLists.txt      |  58 ++++
 boards/arm/rzv2h/rzv2h-evk/src/Makefile            |  69 +++++
 boards/arm/rzv2h/rzv2h-evk/src/rzv2h-evk.h         | 113 +++++++
 boards/arm/rzv2h/rzv2h-evk/src/rzv2h_appexamples.c |  47 +++
 boards/arm/rzv2h/rzv2h-evk/src/rzv2h_appinit.c     |  72 +++++
 boards/arm/rzv2h/rzv2h-evk/src/rzv2h_autoleds.c    | 172 +++++++++++
 boards/arm/rzv2h/rzv2h-evk/src/rzv2h_boot.c        | 145 +++++++++
 boards/arm/rzv2h/rzv2h-evk/src/rzv2h_bringup.c     |  91 ++++++
 boards/arm/rzv2h/rzv2h-evk/src/rzv2h_gpio.c        | 337 +++++++++++++++++++++
 boards/arm/rzv2h/rzv2h-evk/src/rzv2h_userleds.c    | 103 +++++++
 boards/arm/rzv2h/rzv2h-rdk/CMakeLists.txt          |  23 ++
 boards/arm/rzv2h/rzv2h-rdk/Kconfig                 |  22 ++
 .../arm/rzv2h/rzv2h-rdk/configs/nsh-leds/defconfig |  52 ++++
 boards/arm/rzv2h/rzv2h-rdk/configs/nsh/defconfig   |  52 ++++
 boards/arm/rzv2h/rzv2h-rdk/include/board.h         | 151 +++++++++
 boards/arm/rzv2h/rzv2h-rdk/scripts/Make.defs       |  98 ++++++
 .../arm/rzv2h/rzv2h-rdk/scripts/rzv2h-rdk_cr8_0.ld | 224 ++++++++++++++
 boards/arm/rzv2h/rzv2h-rdk/src/CMakeLists.txt      |  58 ++++
 boards/arm/rzv2h/rzv2h-rdk/src/Makefile            |  69 +++++
 boards/arm/rzv2h/rzv2h-rdk/src/rzv2h-rdk.h         | 113 +++++++
 boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_appexamples.c |  47 +++
 boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_appinit.c     |  72 +++++
 boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_autoleds.c    | 172 +++++++++++
 boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_boot.c        | 145 +++++++++
 boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_bringup.c     |  87 ++++++
 boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_gpio.c        | 337 +++++++++++++++++++++
 boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_userleds.c    | 103 +++++++
 35 files changed, 3676 insertions(+)

diff --git a/boards/Kconfig b/boards/Kconfig
index cc419463550..6ce1b23620d 100644
--- a/boards/Kconfig
+++ b/boards/Kconfig
@@ -3839,6 +3839,20 @@ config ARCH_BOARD_TMS570LS31X_USB_KIT
                TI Hercules TMS570LS31xx Evaluation Kit (TMDS570ls31xx USB Kit)
                featuring the Hercules TMS570LS3137ZWT chip.
 
+config ARCH_BOARD_RZV2H_EVK
+       bool "Renesas RZV2H-EVK"
+       depends on ARCH_CHIP_R9A09G057
+       select ARCH_HAVE_LEDS
+       ---help---
+               Renesas RZV2H Evaluation Kit featuring the R9A09G057 
(Cortex-R8) chip.
+
+config ARCH_BOARD_RZV2H_RDK
+       bool "Renesas RZV2H-RDK"
+       depends on ARCH_CHIP_R9A09G057
+       select ARCH_HAVE_LEDS
+       ---help---
+               Renesas RZV2H Development Kit featuring the R9A09G057 
(Cortex-R8) chip.
+
 config ARCH_BOARD_TWR_K60N512
        bool "FreeScale TWR-K60N512 development board"
        depends on ARCH_CHIP_MK60N512VMD100
@@ -4543,6 +4557,8 @@ config ARCH_BOARD
        default "tm4c1294-launchpad"           if ARCH_BOARD_TM4C1294_LAUNCHPAD
        default "tm4c129e-launchpad"           if ARCH_BOARD_TM4C129E_LAUNCHPAD
        default "tms570ls31x-usb-kit"          if ARCH_BOARD_TMS570LS31X_USB_KIT
+       default "rzv2h-evk"                    if ARCH_BOARD_RZV2H_EVK
+       default "rzv2h-rdk"                    if ARCH_BOARD_RZV2H_RDK
        default "lilygo_tbeam_lora_gps"        if 
ARCH_BOARD_LILYGO_TBEAM_LORA_GPS
        default "ttgo_lora_esp32"              if ARCH_BOARD_TTGO_LORA_ESP32
        default "ttgo_t_display_esp32"         if 
ARCH_BOARD_TTGO_T_DISPLAY_ESP32
@@ -5472,6 +5488,12 @@ endif
 if ARCH_BOARD_TMS570LS31X_USB_KIT
 source "boards/arm/tms570/tms570ls31x-usb-kit/Kconfig"
 endif
+if ARCH_BOARD_RZV2H_EVK
+source "boards/arm/rzv2h/rzv2h-evk/Kconfig"
+endif
+if ARCH_BOARD_RZV2H_RDK
+source "boards/arm/rzv2h/rzv2h-rdk/Kconfig"
+endif
 if ARCH_BOARD_RM57L843_LAUNCHXL2
 source "boards/arm/rm57/rm57l843-launchxl2/Kconfig"
 endif
diff --git a/boards/arm/rzv2h/rzv2h-evk/CMakeLists.txt 
b/boards/arm/rzv2h/rzv2h-evk/CMakeLists.txt
new file mode 100644
index 00000000000..2b87d842fa8
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/CMakeLists.txt
@@ -0,0 +1,23 @@
+# 
##############################################################################
+# boards/arm/rzv/rzv2h-evk/CMakeLists.txt
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more 
contributor
+# license agreements.  See the NOTICE file distributed with this work for
+# additional information regarding copyright ownership.  The ASF licenses this
+# file to you under the Apache License, Version 2.0 (the "License"); you may 
not
+# use this file except in compliance with the License.  You may obtain a copy 
of
+# the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+# License for the specific language governing permissions and limitations under
+# the License.
+#
+# 
##############################################################################
+
+add_subdirectory(src)
diff --git a/boards/arm/rzv2h/rzv2h-evk/Kconfig 
b/boards/arm/rzv2h/rzv2h-evk/Kconfig
new file mode 100644
index 00000000000..2631c19046a
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/Kconfig
@@ -0,0 +1,22 @@
+# 
##############################################################################
+# boards/arm/rzv/rzv2h-evk/Kconfig
+#
+# Kconfig for the RZV2H_EVK board support package for the RZV2H MPU.
+#
+if ARCH_BOARD_RZV2H_EVK
+
+config BOARD_RZV2H_EVK
+    bool "RZV2H-EVK Board Support"
+    help
+      Enable support for the RZV2H-EVK board based on the RZV2H MPU.
+
+endif
+
+config RZV2H_EXAMPLE_SUPPORT
+    bool "RZV2H-EVK Example Support"
+    default y
+    depends on ARCH_BOARD_RZV2H_EVK
+    help
+      Enable support for various application examples for the RZV2H-EVK board.
+
+# 
##############################################################################
diff --git a/boards/arm/rzv2h/rzv2h-evk/configs/nsh-leds/defconfig 
b/boards/arm/rzv2h/rzv2h-evk/configs/nsh-leds/defconfig
new file mode 100644
index 00000000000..68a54577f6a
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/configs/nsh-leds/defconfig
@@ -0,0 +1,52 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed 
.config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that 
includes your
+# modifications.
+#
+# CONFIG_ARCH_LEDS is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD="rzv2h-evk"
+CONFIG_ARCH_BOARD_RZV2H_EVK=y
+CONFIG_ARCH_CHIP="rzv2h"
+CONFIG_ARCH_CHIP_R9A09G057=y
+CONFIG_ARCH_CHIP_RZV2H=y
+CONFIG_ARCH_INTERRUPTSTACK=2048
+CONFIG_ARCH_LOWVECTORS=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7R_DCACHE_DISABLE=y
+CONFIG_ARMV7R_ICACHE_DISABLE=y
+CONFIG_ARM_MPU=y
+CONFIG_ARM_MPU_NREGIONS=6
+CONFIG_ARM_THUMB=y
+CONFIG_BINFMT_DISABLE=y
+CONFIG_BOARD_LOOPSPERMSEC=200000
+CONFIG_BUILTIN=y
+CONFIG_DEV_GPIO=y
+CONFIG_EXAMPLES_LEDS=y
+CONFIG_FS_PROCFS=y
+CONFIG_IDLETHREAD_STACKSIZE=2048
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INTELHEX_BINARY=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_READLINE=y
+CONFIG_RAM_SIZE=524288
+CONFIG_RAM_START=0x08180000
+CONFIG_RAW_BINARY=y
+CONFIG_RZV2H_CORTEXR8_0=y
+CONFIG_RZV2H_SCI_B_UART0=y
+CONFIG_SCHED_WAITPID=y
+CONFIG_SCI0_SERIAL_CONSOLE=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SERIAL_TIOCGICOUNT=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_START_DAY=29
+CONFIG_START_MONTH=7
+CONFIG_START_YEAR=2026
+CONFIG_SYSTEM_NSH=y
+CONFIG_TTY_SIGINT=y
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERLED=y
+CONFIG_USERLED_LOWER=y
diff --git a/boards/arm/rzv2h/rzv2h-evk/configs/nsh/defconfig 
b/boards/arm/rzv2h/rzv2h-evk/configs/nsh/defconfig
new file mode 100644
index 00000000000..30e77da4ced
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/configs/nsh/defconfig
@@ -0,0 +1,52 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed 
.config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that 
includes your
+# modifications.
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD="rzv2h-evk"
+CONFIG_ARCH_BOARD_RZV2H_EVK=y
+CONFIG_ARCH_CHIP="rzv2h"
+CONFIG_ARCH_CHIP_R9A09G057=y
+CONFIG_ARCH_CHIP_RZV2H=y
+CONFIG_ARCH_INTERRUPTSTACK=2048
+CONFIG_ARCH_LOWVECTORS=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7R_DCACHE_DISABLE=y
+CONFIG_ARMV7R_ICACHE_DISABLE=y
+CONFIG_ARM_MPU=y
+CONFIG_ARM_MPU_NREGIONS=6
+CONFIG_ARM_THUMB=y
+CONFIG_BINFMT_DISABLE=y
+CONFIG_BOARD_LOOPSPERMSEC=200000
+CONFIG_BUILTIN=y
+CONFIG_DEV_GPIO=y
+CONFIG_EXAMPLES_GPIO=y
+CONFIG_FS_PROCFS=y
+CONFIG_IDLETHREAD_STACKSIZE=2048
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INTELHEX_BINARY=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_READLINE=y
+CONFIG_RAM_SIZE=524288
+CONFIG_RAM_START=0x08180000
+CONFIG_RAW_BINARY=y
+CONFIG_RZV2H_CORTEXR8_0=y
+CONFIG_RZV2H_SCI_B_UART0=y
+CONFIG_SCHED_WAITPID=y
+CONFIG_SCI0_SERIAL_CONSOLE=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SERIAL_TIOCGICOUNT=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_START_DAY=29
+CONFIG_START_MONTH=7
+CONFIG_START_YEAR=2026
+CONFIG_SYSTEM_NSH=y
+CONFIG_TESTING_OSTEST=y
+CONFIG_TESTING_OSTEST_NBARRIER_THREADS=3
+CONFIG_TESTING_OSTEST_STACKSIZE=2048
+CONFIG_TTY_SIGINT=y
+CONFIG_USEC_PER_TICK=1000
diff --git a/boards/arm/rzv2h/rzv2h-evk/include/board.h 
b/boards/arm/rzv2h/rzv2h-evk/include/board.h
new file mode 100644
index 00000000000..bcb10095859
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/include/board.h
@@ -0,0 +1,151 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-evk/include/board.h
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+#ifndef __BOARDS_ARM_RZV2H_RZV2H_EVK_INCLUDE_BOARD_H
+#define __BOARDS_ARM_RZV2H_RZV2H_EVK_INCLUDE_BOARD_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* GPIO definitions *********************************************************/
+
+#define BOARD_NGPIOOUT          2
+#define BOARD_NGPIOIN           1
+
+/* LED index values for use with board_userled() */
+
+#define BOARD_LED_0             0
+#define BOARD_LED_1             1
+#define BOARD_NLEDS             2
+
+/* LED bits for use with board_userled_all() */
+
+#define BOARD_LED_0_BIT         (1 << BOARD_LED_0)
+#define BOARD_LED_1_BIT         (1 << BOARD_LED_1)
+
+/* LED pins - aliases to existing NuttX LED macros */
+
+#define BOARD_P0_0_GPIO         GPIO_P0_0_OUTPUT_LOW
+#define BOARD_P0_1_GPIO         GPIO_P0_1_OUTPUT_LOW
+
+/* Button pins - using Pmod at CN1 */
+
+#define BOARD_P8_2_BUTTON  GPIO_P8_2_INPUT_PULLDOWN
+
+/* GPIO Configuration */
+
+#define GPIO_P0_0_OUTPUT_LOW (gpio_pinset_t){BSP_IO_PORT_00_PIN_00, 
(IOPORT_CFG_DRIVE_B01 | IOPORT_CFG_PORT_DIRECTION_OUTPUT | 
IOPORT_CFG_PORT_OUTPUT_LOW | IOPORT_CFG_SLEW_RATE_FAST)}
+#define GPIO_P0_1_OUTPUT_LOW (gpio_pinset_t){BSP_IO_PORT_00_PIN_01, 
(IOPORT_CFG_DRIVE_B01 | IOPORT_CFG_PORT_DIRECTION_OUTPUT | 
IOPORT_CFG_PORT_OUTPUT_LOW | IOPORT_CFG_SLEW_RATE_FAST)}
+#define GPIO_P8_2_INPUT_PULLDOWN (gpio_pinset_t){BSP_IO_PORT_08_PIN_02, 
(IOPORT_CFG_PORT_DIRECTION_INPUT | IOPORT_CFG_SPECIAL_PURPOSE_PORT_INPUT_ENABLE 
| IOPORT_CFG_PULLDOWN_ENABLE)}
+
+/* In this stage, autoled is not supported */
+
+#define LED_STARTED         0
+#define LED_HEAPALLOCATE    0
+#define LED_IRQSENABLED     0
+#define LED_STACKCREATED    0
+#define LED_INIRQ           0
+#define LED_SIGNAL          0
+#define LED_ASSERTION       0
+#define LED_PANIC           0
+
+/* Peripheral definitions ***************************************************/
+
+/* SCI0 is used as the default NSH console interface */
+
+#define BOARD_CONSOLE_UART        0       /* Use SCI0 for console */
+#define BOARD_CONSOLE_BAUD        115200
+#define BOARD_CONSOLE_BITS        8
+#define BOARD_CONSOLE_PARITY      0
+#define BOARD_CONSOLE_2STOP       0
+
+/* SCI-B UART pins */
+
+#define BOARD_SCI0_TXD_GPIO   GPIO_TXD0_MOSI0_DA0_P5_0_M1
+#define BOARD_SCI0_RXD_GPIO   GPIO_RXD0_MISO0_SCL0_P5_1_M1
+#define BOARD_SCI1_TXD_GPIO   GPIO_TXD1_MOSI1_SDA1_P5_2_M1
+#define BOARD_SCI1_RXD_GPIO   GPIO_RXD1_MISO1_SCL1_P5_3_M1
+#define BOARD_SCI2_TXD_GPIO   GPIO_TXD2_MOSI2_SDA2_P5_4_M1
+#define BOARD_SCI2_RXD_GPIO   GPIO_RXD2_MISO2_SCL2_P5_5_M1
+#define BOARD_SCI3_TXD_GPIO   GPIO_TXD3_MOSI3_SDA3_P5_6_M1
+#define BOARD_SCI3_RXD_GPIO   GPIO_RXD3_MISO3_SCL3_P5_7_M1
+
+#define BOARD_SCI4_TXD_GPIO   GPIO_TXD4_MOSI4_SDA4_P8_4_M6
+#define BOARD_SCI4_RXD_GPIO   GPIO_RXD4_MISO4_SCL4_P8_5_M6
+#define BOARD_SCI5_TXD_GPIO   GPIO_TXD5_MOSI5_SDA5_P7_2_M1
+#define BOARD_SCI5_RXD_GPIO   GPIO_RXD5_MISO5_SCL5_P7_3_M1
+#define BOARD_SCI6_TXD_GPIO   GPIO_TXD6_MOSI6_SDA6_P7_4_M1
+#define BOARD_SCI6_RXD_GPIO   GPIO_RXD6_MISO6_SCL6_P7_5_M1
+#define BOARD_SCI7_TXD_GPIO   GPIO_TXD7_MOSI7_SDA7_P7_6_M1
+#define BOARD_SCI7_RXD_GPIO   GPIO_RXD7_MISO7_SCL7_P7_7_M1
+#define BOARD_SCI8_TXD_GPIO   GPIO_TXD8_MOSI8_SDA6_P9_0_M2
+#define BOARD_SCI8_RXD_GPIO   GPIO_RXD8_MISO8_SCL6_P9_1_M2
+#define BOARD_SCI9_TXD_GPIO   GPIO_TXD9_MOSI9_SDA9_P8_2_M6
+#define BOARD_SCI9_RXD_GPIO   GPIO_RXD9_MISO9_SCL9_P8_3_M6
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/****************************************************************************
+ * Name: rzv2h_board_initialize
+ *
+ * Description:
+ *   All RZV2H architectures must provide the following entry point. This
+ *   entry point is called early in the initialization -- after clocking
+ *   and memory have been configured but before caches have been enabled
+ *   and before any devices have been initialized.
+ *
+ ****************************************************************************/
+
+void rzv2h_board_initialize(void);
+
+/****************************************************************************
+ * Name: rzv2h_serial_setup
+ *
+ * Description:
+ *   Configure the board used by the enabled SCI UART channels.
+ *
+ ****************************************************************************/
+
+void rzv2h_serial_setup(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __BOARDS_ARM_RZV2H_RZV2H_EVK_INCLUDE_BOARD_H */
diff --git a/boards/arm/rzv2h/rzv2h-evk/scripts/Make.defs 
b/boards/arm/rzv2h/rzv2h-evk/scripts/Make.defs
new file mode 100644
index 00000000000..41acf8a42c3
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/scripts/Make.defs
@@ -0,0 +1,98 @@
+############################################################################
+# boards/arm/rzv2h/rzv2h-evk/scripts/Make.defs
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.  The
+# ASF licenses this file to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance with the
+# License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+# License for the specific language governing permissions and limitations
+# under the License.
+#
+############################################################################
+
+include $(TOPDIR)/.config
+include $(TOPDIR)/tools/Config.mk
+include $(TOPDIR)/arch/arm/src/armv7-r/Toolchain.defs
+
+# Determine linker script based on build type
+ifeq ($(CONFIG_RZV2H_CORTEXR8_0),y)
+  LDSCRIPT = rzv2h-evk_cr8_0.ld
+endif
+
+ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
+
+# Compile flags
+CFLAGS := $(ARCHCFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) 
$(ARCHDEFINES) $(EXTRAFLAGS) -pipe -Wno-undef
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS := $(ARCHCXXFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) 
$(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS := $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS)
+AFLAGS := $(CFLAGS) -D__ASSEMBLY__
+
+# Linker flags
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) 
-T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+# ELF module flags
+LDELFFLAGS = -r -e main
+ifeq ($(CONFIG_CYGWIN_WINTOOL),y)
+  LDELFFLAGS += -T "${shell cygpath -w 
$(BOARD_DIR)$(DELIM)scripts$(DELIM)gnu-elf.ld}"
+else
+  LDELFFLAGS += -T $(BOARD_DIR)$(DELIM)scripts$(DELIM)gnu-elf.ld
+endif
+
+# Board-specific flags
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
+HOSTLDFLAGS =
+
+#hal renesas include
+HAL_INDIR = 
$(TOPDIR)$(DELIM)arch$(DELIM)$(CONFIG_ARCH)$(DELIM)src$(DELIM)common$(DELIM)renesas$(DELIM)hal_renesas
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)inc
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)inc$(DELIM)instances
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)inc$(DELIM)instances$(DELIM)rzv
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)inc$(DELIM)api
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)src$(DELIM)rzv$(DELIM)bsp$(DELIM)mcu$(DELIM)rzv2h
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)src$(DELIM)rzv$(DELIM)bsp$(DELIM)mcu$(DELIM)all
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)src$(DELIM)rzv$(DELIM)bsp$(DELIM)mcu$(DELIM)all$(DELIM)cr
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)src$(DELIM)rzv$(DELIM)bsp$(DELIM)cmsis$(DELIM)Device$(DELIM)RENESAS$(DELIM)Include
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)rz$(DELIM)rz_cfg$(DELIM)fsp_cfg
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)rz$(DELIM)rz_cfg$(DELIM)fsp_cfg$(DELIM)bsp
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)rz$(DELIM)rz_cfg$(DELIM)fsp_cfg$(DELIM)bsp$(DELIM)rzv2h
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)rz$(DELIM)rz_cfg$(DELIM)fsp_cfg$(DELIM)bsp$(DELIM)rzv2h$(DELIM)cr
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)rz$(DELIM)rz_cfg$(DELIM)fsp_cfg$(DELIM)rzv
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)rz$(DELIM)portable$(DELIM)rzv
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)rz$(DELIM)portable$(DELIM)rzv$(DELIM)cr
+CFLAGS += $(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)cmsis
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)cmsis$(DELIM)include$(DELIM)cr
+
+# Generate the raw image U-Boot loads at CONFIG_RAM_START before starting
+# CR8_0 from reset.  Select the SRAM sections explicitly so distant NOLOAD
+# OpenAMP regions can never create padding in the raw binary.  .vectors runs
+# from ITCM, but its load copy is the first thing in RAM and the U-Boot reset
+# trampoline in ITCM jumps to it, so it has to be in the image; without it
+# nuttx_uboot.bin would also start at .text instead of at CONFIG_RAM_START.
+
+ifeq ($(CONFIG_RZV2H_UBOOT_IMAGE),y)
+define POSTBUILD
+       @echo "CP: nuttx_uboot.bin"
+       $(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary \
+               --only-section=.vectors --only-section=.text \
+               --only-section=.init_section \
+               --only-section=.ARM.extab --only-section=.ARM.exidx \
+               --only-section=.data $(BIN) nuttx_uboot.bin
+       $(Q) echo nuttx_uboot.bin >> nuttx.manifest
+endef
+endif
diff --git a/boards/arm/rzv2h/rzv2h-evk/scripts/rzv2h-evk_cr8_0.ld 
b/boards/arm/rzv2h/rzv2h-evk/scripts/rzv2h-evk_cr8_0.ld
new file mode 100644
index 00000000000..a67fc45131d
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/scripts/rzv2h-evk_cr8_0.ld
@@ -0,0 +1,224 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-evk/scripts/rzv2h-evk_cr8_0.ld
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+/*
+ * RZ/V2H Cortex-R8_0 linker script for NuttX.
+ *
+ */
+
+/* Core-local TCM map of the RZ/V2H CR8, from the Renesas HAL
+ * [FSP: bsp_slave_address.h:19-25]:
+ *
+ *   ITCM  core 0x00000000, 128 KB, AXI alias 0x12040000
+ *   DTCM  core 0x00020000, 128 KB, AXI alias 0x12060000
+ *
+ * Both build types keep a load copy of the vector table at the start of
+ * RAM, which arm_boot() copies to ITCM.  CR8_0 takes its reset vector from
+ * ITCM, so before releasing CR8_0 from reset U-Boot writes a fixed two-word
+ * trampoline there through the AXI alias:
+ *
+ *   0x0: 0xe51ff004  ldr pc, [pc, #-4]
+ *   0x4: 0x08180000  ORIGIN(RAM), the load copy of the table
+ *
+ * The reset slot of the load copy then branches to __start.  A
+ * debugger-loaded image is entered at __start directly; ITCM is not mapped
+ * until arm_boot() programs the ATCM region register.
+ */
+
+MEMORY
+{
+    ITCM (rwx)     : ORIGIN = 0x00000000, LENGTH = 128K
+    DTCM (rwx)     : ORIGIN = 0x00020000, LENGTH = 128K
+    RAM  (rwx)     : ORIGIN = 0x08180000, LENGTH = 512K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vector_start)
+ENTRY(__start)
+
+/* Start of the read-only SRAM part of the image.  Everything from here up to
+ * __mpu_code_end (the vector load image, .text, .rodata, .init_section and
+ * .ARM.exidx) is covered by one MPU region programmed
+ * RO + executable; see g_mpu_region_table[] in
+ * arch/arm/src/rzv2h/rzv2h_mpu_region.c.
+ */
+
+__mpu_code_start = ABSOLUTE(ORIGIN(RAM));
+
+SECTIONS
+{
+
+    /* The table always has a load copy at the start of RAM, at
+     * _vector_load, which arm_boot() copies to VECTOR_ADDRESS (ITCM).
+     *
+     * The U-Boot image links the table at its ITCM run address and stores
+     * it in RAM (AT> RAM), so nuttx_uboot.bin starts with it.  CR8_0
+     * reaches it at reset through the U-Boot trampoline described at the
+     * top of this file, so the load copy has to stay at ORIGIN(RAM).
+     *
+     * The debugger image links the table in RAM.  That works because the
+     * table is position independent: its branch slots are PC-relative and
+     * its handler entries contain absolute addresses.
+     */
+
+    .vectors :
+    {
+        . = ALIGN(32);
+        _vector_start = ABSOLUTE(.);
+        KEEP(*(.vectors))
+        _vector_end = ABSOLUTE(.);
+#ifdef CONFIG_RZV2H_UBOOT_IMAGE
+    } > ITCM AT> RAM
+#else
+    } > RAM
+#endif
+
+    /* Where the table is stored in the image, as opposed to _vector_start,
+     * where it runs.  The two are equal in debugger builds.
+     */
+
+    _vector_load = LOADADDR(.vectors);
+
+#ifdef CONFIG_RZV2H_UBOOT_IMAGE
+    ASSERT(_vector_load == ORIGIN(RAM),
+           "U-Boot reset trampoline expects .vectors at ORIGIN(RAM)")
+#endif
+    .text :
+    {
+        . = ALIGN(4);
+        _stext = ABSOLUTE(.);
+        *(.text .text.*)
+        *(.fixup)
+        *(.gnu.warning)
+        *(.rodata .rodata.*)
+        *(.gnu.linkonce.t.*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.got)
+        *(.gcc_except_table)
+        *(.gnu.linkonce.r.*)
+        _etext = ABSOLUTE(.);
+    } > RAM
+
+    .init_section :
+    {
+        . = ALIGN(4);
+        _sinit = ABSOLUTE(.);
+        KEEP(*(SORT_BY_INIT_PRIORITY(.init_array.*) 
SORT_BY_INIT_PRIORITY(.ctors.*)))
+        KEEP(*(.init_array EXCLUDE_FILE(*crtbegin.o *crtbegin?.o *crtend.o 
*crtend?.o) .ctors))
+        _einit = ABSOLUTE(.);
+    } > RAM
+
+    .dtcm (NOLOAD) :
+    {
+        __HeapBase = .;
+        KEEP(*(.heap))
+        __HeapLimit = .;
+        KEEP(*(.stack))
+        KEEP(*(.stack.*))
+    } > DTCM
+
+    .ARM.extab :
+    {
+        *(.ARM.extab*)
+    } > RAM
+
+    PROVIDE_HIDDEN (__exidx_start = .);
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > RAM
+    PROVIDE_HIDDEN (__exidx_end = .);
+
+    /* Round the read-only part of the image up to a power of two.
+     *
+     * The MPU region that makes this range executable and read-only has to
+     * obey PMSAv7: the size must be 2^n and the base must be a multiple of
+     * that size.  Padding to 2^n here means mpu_modify_region() finds an
+     * exact fit and needs no sub-region disable mask, so the region cannot
+     * silently spill over into .data - which would make every write to a
+     * global fault.  The base needs no work: ORIGIN(RAM) is 512 KB aligned,
+     * so it is aligned to any 2^n <= 512 KB.
+     *
+     * The padding has to happen inside an output section attached to RAM.
+     * Assignments to "." outside of an output section move the location
+     * counter but do NOT move the allocation pointer of the memory region,
+     * so the next "> RAM" section would be placed back at the unpadded
+     * address and only the symbols would move.
+     *
+     * (NOLOAD) keeps the padding out of the ELF file itself; it still
+     * occupies address space, which is all that is needed here.
+     *
+     * LOG2CEIL() is a GNU ld builtin (binutils >= 2.29).
+     */
+
+    .rom_region_pad (NOLOAD) :
+    {
+        . = ALIGN(32);
+        . = ALIGN(1 << LOG2CEIL(ABSOLUTE(.) - __mpu_code_start));
+    } > RAM
+
+    __mpu_code_end = ABSOLUTE(.);
+
+    _eronly = ABSOLUTE(.);
+
+    .data :
+    {
+        _sdata = ABSOLUTE(.);
+        *(.data .data.*)
+        *(.gnu.linkonce.d.*)
+        CONSTRUCTORS
+        . = ALIGN(4);
+        _edata = ABSOLUTE(.);
+    } > RAM
+
+    .bss :
+    {
+        _sbss = ABSOLUTE(.);
+        *(.bss .bss.*)
+        *(.gnu.linkonce.b.*)
+        *(COMMON)
+        . = ALIGN(4);
+        _ebss = ABSOLUTE(.);
+    } > RAM
+
+    /* The padding above is not linear: crossing 128 KB of code costs another
+     * 128 KB of SRAM, taken straight out of the heap.  Fail the link instead
+     * of losing a quarter of the RAM silently.
+     */
+
+    /* Stabs debugging sections. */
+    .stab 0 : { *(.stab) }
+    .stabstr 0 : { *(.stabstr) }
+    .stab.excl 0 : { *(.stab.excl) }
+    .stab.exclstr 0 : { *(.stab.exclstr) }
+    .stab.index 0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment 0 : { *(.comment) }
+    .debug_abbrev 0 : { *(.debug_abbrev) }
+    .debug_info 0 : { *(.debug_info) }
+    .debug_line 0 : { *(.debug_line) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/boards/arm/rzv2h/rzv2h-evk/src/CMakeLists.txt 
b/boards/arm/rzv2h/rzv2h-evk/src/CMakeLists.txt
new file mode 100644
index 00000000000..a14522415cc
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/src/CMakeLists.txt
@@ -0,0 +1,58 @@
+# 
##############################################################################
+# boards/arm/rzv2h/rzv2h-evk/src/CMakeLists.txt
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more 
contributor
+# license agreements.  See the NOTICE file distributed with this work for
+# additional information regarding copyright ownership.  The ASF licenses this
+# file to you under the Apache License, Version 2.0 (the "License"); you may 
not
+# use this file except in compliance with the License.  You may obtain a copy 
of
+# the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+# License for the specific language governing permissions and limitations under
+# the License.
+#
+# 
##############################################################################
+
+# Core board initialization files
+set(SRCS rzv2h_boot.c rzv2h_bringup.c)
+
+# Application examples support
+if(CONFIG_RZV2H_EXAMPLE_SUPPORT)
+  list(APPEND SRCS rzv2h_appexamples.c)
+endif()
+
+# Board-specific initialization
+if(CONFIG_BOARDCTL)
+  list(APPEND SRCS rzv2h_appinit.c)
+endif()
+
+if(CONFIG_ARCH_BUTTONS)
+  list(APPEND SRCS rzv2h_buttons.c)
+endif()
+
+if(CONFIG_ARCH_LEDS)
+  list(APPEND SRCS rzv2h_autoleds.c)
+else()
+  list(APPEND SRCS rzv2h_userleds.c)
+endif()
+
+if(CONFIG_DEV_GPIO)
+  list(APPEND SRCS rzv2h_gpio.c)
+endif()
+
+# Peripheral driver initialization
+
+target_sources(board PRIVATE ${SRCS})
+
+# Set linker script based on core configuration
+if(CONFIG_RZV2H_CORTEXR8_0)
+  set_property(GLOBAL PROPERTY LD_SCRIPT
+                               "${NUTTX_BOARD_DIR}/scripts/rzv2h-evk_cr8_0.ld")
+endif()
diff --git a/boards/arm/rzv2h/rzv2h-evk/src/Makefile 
b/boards/arm/rzv2h/rzv2h-evk/src/Makefile
new file mode 100644
index 00000000000..c2c6b1484af
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/src/Makefile
@@ -0,0 +1,69 @@
+############################################################################
+# boards/arm/rzv2h/rzv2h-evk/src/Makefile
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.  The
+# ASF licenses this file to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance with the
+# License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+# License for the specific language governing permissions and limitations
+# under the License.
+#
+############################################################################
+
+include $(TOPDIR)/Make.defs
+
+############################################################################
+# Core board initialization files
+############################################################################
+
+CSRCS = rzv2h_boot.c rzv2h_bringup.c
+
+# Application examples support
+ifeq ($(CONFIG_RZV2H_EXAMPLE_SUPPORT),y)
+CSRCS += rzv2h_appexamples.c
+endif
+
+############################################################################
+# Board-specific initialization
+############################################################################
+
+# Application initialization
+ifeq ($(CONFIG_BOARDCTL),y)
+CSRCS += rzv2h_appinit.c
+endif
+
+# Button/Switch support
+ifeq ($(CONFIG_ARCH_BUTTONS),y)
+CSRCS += rzv2h_buttons.c
+endif
+
+# LED support
+ifeq ($(CONFIG_ARCH_LEDS),y)
+CSRCS += rzv2h_autoleds.c
+else
+CSRCS += rzv2h_userleds.c
+endif
+
+ifeq ($(CONFIG_DEV_GPIO),y)
+CSRCS += rzv2h_gpio.c
+endif
+
+############################################################################
+# Peripheral driver initialization
+############################################################################
+
+############################################################################
+# Example applications
+############################################################################
+
+include $(TOPDIR)/boards/Board.mk
diff --git a/boards/arm/rzv2h/rzv2h-evk/src/rzv2h-evk.h 
b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h-evk.h
new file mode 100644
index 00000000000..07a73aeed21
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h-evk.h
@@ -0,0 +1,113 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-evk/src/rzv2h-evk.h
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+#ifndef __BOARDS_ARM_RZV2H_RZV2H_EVK_SRC_H
+#define __BOARDS_ARM_RZV2H_RZV2H_EVK_SRC_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <stdint.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+#define LED_DRIVER_PATH "/dev/userleds"
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Data
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: rzv2h_bringup
+ ****************************************************************************/
+
+int rzv2h_bringup(void);
+
+/****************************************************************************
+ * Name: rzv2h_gpio_initialize
+ *
+ * Description:
+ *   Initialize GPIO drivers for use with /apps/examples/gpio
+ *
+ * Return Value:
+ *   OK on success; a negated errno value on failure.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_DEV_GPIO
+int rzv2h_gpio_initialize(void);
+#endif
+
+/****************************************************************************
+ * Name: board_button_initialize
+ *
+ * Description:
+ *   Initialize buttons
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_ARCH_BUTTONS
+void board_button_initialize(void);
+#endif
+
+/****************************************************************************
+ * Name: rzv2h_appexamples
+ *
+ * Description:
+ *   Run all enabled board example applications
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: rzv2h_serial_setup
+ *
+ * Description:
+ *   Configure serial pins for UART operation
+ *
+ ****************************************************************************/
+
+void rzv2h_serial_setup(void);
+
+#ifdef CONFIG_RZV2H_EXAMPLE_SUPPORT
+int rzv2h_appexamples(void);
+#endif
+
+/****************************************************************************
+ * Example application initialization functions
+ ****************************************************************************/
+
+#endif /* __ASSEMBLY__ */
+#endif /* __BOARDS_ARM_RZV2H_RZV2H_EVK_SRC_H */
diff --git a/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_appexamples.c 
b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_appexamples.c
new file mode 100644
index 00000000000..3c9c5285af7
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_appexamples.c
@@ -0,0 +1,47 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-evk/src/rzv2h_appexamples.c
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <errno.h>
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: rzv2h_appexamples
+ *
+ * Description:
+ *   Run all enabled board example applications
+ *
+ ****************************************************************************/
+
+int rzv2h_appexamples(void)
+{
+  /* Placeholder for board-specific examples */
+
+  return 0;
+}
diff --git a/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_appinit.c 
b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_appinit.c
new file mode 100644
index 00000000000..5187a7d0ea3
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_appinit.c
@@ -0,0 +1,72 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-evk/src/rzv2h_appinit.c
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nuttx/board.h>
+#include "rzv2h-evk.h"
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ *   Perform application specific initialization.  This function is never
+ *   called directly from application code, but only indirectly via the
+ *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ *   arg - The boardctl() argument is passed to the board_app_initialize()
+ *         implementation without modification.  The argument has no
+ *         meaning to NuttX; the meaning of the argument is a contract
+ *         between the board-specific initialization logic and the
+ *         matching application logic.  The value could be such things as a
+ *         mode enumeration value, a set of DIP switch settings, a pointer
+ *         to configuration data read from a file or serial FLASH, or
+ *         whatever you would like to do with it.  Every implementation
+ *         should accept zero/NULL as a default configuration.
+ *
+ * Returned Value:
+ *   Zero (OK) is returned on success; a negated errno value is returned on
+ *   any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+
+int board_app_initialize(uintptr_t arg)
+{
+#ifdef CONFIG_BOARD_LATE_INITIALIZE
+  /* Board initialization already performed by board_late_initialize() */
+
+  return OK;
+#else
+  /* Perform board-specific initialization */
+
+  return rzv2h_bringup();
+#endif
+}
diff --git a/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_autoleds.c 
b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_autoleds.c
new file mode 100644
index 00000000000..cd4446af433
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_autoleds.c
@@ -0,0 +1,172 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-evk/src/rzv2h_autoleds.c
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <assert.h>
+#include <debug.h>
+
+#include <nuttx/board.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "arm_internal.h"
+#include "rzv2h_gpio.h"
+
+#ifdef CONFIG_ARCH_LEDS
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/* This array maps LED numbers to GPIO configurations */
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: led_dumppins
+ ****************************************************************************/
+
+#ifdef LED_VERBOSE
+static void led_dumppins(const char *msg)
+{
+  (void)msg;
+}
+#else
+#  define led_dumppins(m)
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_autoled_initialize
+ *
+ * Description:
+ *   Initialize LED GPIOs so that LEDs can be controlled.
+ *
+ ****************************************************************************/
+
+void board_autoled_initialize(void)
+{
+  ;
+}
+
+/****************************************************************************
+ * Name: board_autoled_on
+ *
+ * Description:
+ *   Set the LED configuration into the ON condition for the state provided
+ *   by the led parameter.  This may be one of:
+ *
+ *   LED_STARTED       - NuttX has been started
+ *   LED_HEAPALLOCATE  - Heap has been allocated
+ *   LED_IRQSENABLED   - Interrupts enabled
+ *   LED_STACKCREATED  - Idle stack created
+ *   LED_INIRQ         - In an interrupt handler
+ *   LED_SIGNAL        - In a signal handler
+ *   LED_ASSERTION     - An assertion failed
+ *   LED_PANIC         - The system has crashed
+ *
+ ****************************************************************************/
+
+void board_autoled_on(int led)
+{
+  /* Active low LEDs: write 0 to turn ON */
+
+  (void)led;
+}
+
+/****************************************************************************
+ * Name: board_autoled_off
+ *
+ * Description:
+ *   Set the LED configuration into the OFF condition for the state provided
+ *   by the led parameter.
+ *
+ ****************************************************************************/
+
+void board_autoled_off(int led)
+{
+  /* Active low LEDs: write 1 to turn OFF */
+
+  (void)led;
+}
+
+#endif /* CONFIG_ARCH_LEDS */
+
+/****************************************************************************
+ * Name: board_userled_initialize
+ *
+ * Description:
+ *   If CONFIG_ARCH_LEDS is not defined, then the board can provide
+ *   application-controlled LED functionality via these functions.
+ *
+ ****************************************************************************/
+
+#ifndef CONFIG_ARCH_LEDS
+uint32_t board_userled_initialize(void)
+{
+  return 0;
+}
+
+/****************************************************************************
+ * Name: board_userled
+ *
+ * Description:
+ *   Set the LED to the on or off state
+ *
+ ****************************************************************************/
+
+void board_userled(int led, bool ledon)
+{
+  (void)led;
+  (void)ledon;
+}
+
+/****************************************************************************
+ * Name: board_userled_all
+ *
+ * Description:
+ *   Set the state of all LEDs
+ *
+ ****************************************************************************/
+
+void board_userled_all(uint32_t ledset)
+{
+  (void)ledset;
+}
+
+#endif /* !CONFIG_ARCH_LEDS */
diff --git a/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_boot.c 
b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_boot.c
new file mode 100644
index 00000000000..924ebbc43df
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_boot.c
@@ -0,0 +1,145 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-evk/src/rzv2h_boot.c
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+#include <stdint.h>
+
+#include <nuttx/board.h>
+#include <arch/board/board.h>
+
+#include "arm_internal.h"
+#include <arch/rzv2h/rzv2h_gpio.h>
+#include "rzv2h-evk.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* GPIO Port Security Control registers base - RZV2H specific */
+#define RZV2H_GPIO_PMSAR_BASE       0x14030800  /* Port Mode Security 
Attribution */
+#define RZV2H_GPIO_PSCU_BASE        0x14030C00  /* Port Security Control Unit 
*/
+
+/* Number of GPIO ports in RZV2H (ports 0x20-0x2B = 12 ports) */
+#define RZV2H_GPIO_NPORTS           12
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: rzv2h_gpio_security_init
+ *
+ * Description:
+ *   Initialize GPIO port security attributes to secure mode (default).
+ *   Must be called before configuring any GPIO pins.
+ *   Based on FSP r_ioport security initialization.
+ *
+ ****************************************************************************/
+
+static void rzv2h_gpio_security_init(void)
+{
+#ifdef CONFIG_ARM_TRUSTZONE
+  volatile uint32_t *pmsar;
+  volatile uint32_t *pscu;
+  int port;
+
+  /* Initialize PMSAR (Port Mode Security Attribution Register)
+   * Set all pins to secure mode (0 = secure, 1 = non-secure)
+   */
+
+  pmsar = (volatile uint32_t *)RZV2H_GPIO_PMSAR_BASE;
+  for (port = 0; port < RZV2H_GPIO_NPORTS; port++)
+    {
+      pmsar[port] = 0x00000000;  /* All pins secure */
+    }
+
+  /* Initialize PSCU (Port Security Control Unit)
+   * Configure security control for each port
+   */
+
+  pscu = (volatile uint32_t *)RZV2H_GPIO_PSCU_BASE;
+  for (port = 0; port < RZV2H_GPIO_NPORTS; port++)
+    {
+      pscu[port] = 0x00000000;  /* Default security settings */
+    }
+
+  ARM_DSB();
+#endif
+}
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: rzv2h_board_initialize
+ *
+ * Description:
+ *   All RZV architectures must provide the following entry point.  This
+ *   entry point is called early in the initialization -- after clocks and
+ *   memory have been configured but before any devices have been
+ *   initialized.
+ *
+ *   This function is called from rzv_start.c during the boot sequence.
+ *
+ ****************************************************************************/
+
+void rzv2h_board_initialize(void)
+{
+  /* Initialize GPIO security attributes (TrustZone) */
+
+  rzv2h_gpio_security_init();
+
+  /* Configure SCI/UART pins for serial communication */
+
+#ifdef CONFIG_RZV2H_UART_SCI
+  rzv2h_serial_setup();
+#endif
+
+  /* Configure on-board LEDs if LED support has been selected */
+
+#ifdef CONFIG_ARCH_LEDS
+  board_autoled_initialize();
+#endif
+
+  /* Initialize any board-specific GPIO configurations */
+
+#ifdef CONFIG_BOARDCTL_IOCTL
+  /* Additional board-specific initialization can be done via ioctl */
+#endif
+}
+
+#ifdef CONFIG_BOARD_LATE_INITIALIZE
+void board_late_initialize(void)
+{
+  /* Perform board-specific initialization */
+
+  rzv2h_bringup();
+}
+
+#endif
diff --git a/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_bringup.c 
b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_bringup.c
new file mode 100644
index 00000000000..622ea33148a
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_bringup.c
@@ -0,0 +1,91 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-evk/src/rzv2h_bringup.c
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <sys/mount.h>
+#include <syslog.h>
+
+#include <arch/barriers.h>
+#include <nuttx/arch.h>
+#include <nuttx/board.h>
+#include <nuttx/leds/userled.h>
+
+#include "rzv2h-evk.h"
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: rzv2h_bringup
+ ****************************************************************************/
+
+int rzv2h_bringup(void)
+{
+  int ret = OK;
+
+#ifdef CONFIG_FS_PROCFS
+  /* Mount the procfs file system */
+
+  ret = mount(NULL, "/proc", "procfs", 0, NULL);
+  UP_DSB();
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, "ERROR: Failed to mount procfs at /proc: %d\n", ret);
+    }
+#endif
+
+#if defined(CONFIG_DEV_GPIO)
+  ret = rzv2h_gpio_initialize();
+  UP_DSB();
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, "ERROR: rzv2h_gpio_initialize() failed: %d\n", ret);
+      return ret;
+    }
+#endif
+
+#if !defined(CONFIG_ARCH_LEDS) && defined(CONFIG_USERLED_LOWER)
+  /* Register the user LED driver.  The generic lower half calls
+   * board_userled_initialize() before registering /dev/userleds.
+   */
+
+  ret = userled_lower_initialize(LED_DRIVER_PATH);
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, "ERROR: userled_lower_initialize() failed: %d\n", ret);
+      return ret;
+    }
+#endif
+
+  return OK;
+}
diff --git a/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_gpio.c 
b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_gpio.c
new file mode 100644
index 00000000000..0577818a6a8
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_gpio.c
@@ -0,0 +1,337 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-evk/src/rzv2h_gpio.c
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdbool.h>
+#include <assert.h>
+#include <nuttx/debug.h>
+#include <errno.h>
+
+#include <arch/board/board.h>
+#include <nuttx/ioexpander/gpio.h>
+
+#include "rzv2h_gpio.h"
+#include "hardware/rzv2h_pinmap.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+#ifdef CONFIG_RZV2H_GPIO
+
+struct rzv2hgpio_dev_s
+{
+  struct gpio_dev_s gpio;
+  uint8_t id;
+};
+
+struct rzv2hgpint_dev_s
+{
+  struct rzv2hgpio_dev_s rzv2hgpio;
+  pin_interrupt_t callback;
+};
+
+/****************************************************************************
+ * Private Functions Prototypes
+ ****************************************************************************/
+
+#if BOARD_NGPIOIN > 0
+static int gpin_read(struct gpio_dev_s *dev, bool *value);
+static int gpin_attach(struct gpio_dev_s *dev, pin_interrupt_t callback);
+static int gpin_enable(struct gpio_dev_s *dev, bool enable);
+
+#endif
+#if BOARD_NGPIOOUT > 0
+static int gpout_read(struct gpio_dev_s *dev, bool *value);
+static int gpout_write(struct gpio_dev_s *dev, bool value);
+
+#endif
+static int gpio_setpintype(struct gpio_dev_s *dev,
+                           enum gpio_pintype_e gpio_pintype);
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+#if BOARD_NGPIOIN > 0
+static const struct gpio_operations_s gpin_ops =
+{
+  .go_read      = gpin_read,   .go_write        = NULL,
+  .go_attach    = gpin_attach,
+  .go_enable    = gpin_enable, .go_setpintype   = gpio_setpintype,
+};
+#endif
+
+#if BOARD_NGPIOOUT > 0
+static const struct gpio_operations_s gpout_ops =
+{
+  .go_read      = gpout_read, .go_write            = gpout_write,
+  .go_attach    = NULL,
+  .go_enable    = NULL,       .go_setpintype       = gpio_setpintype,
+};
+#endif
+
+#if BOARD_NGPIOIN > 0
+
+/* This array maps the GPIO pins used as INPUT */
+
+static const gpio_pinset_t      g_gpioinputs[BOARD_NGPIOIN] =
+{
+  BOARD_P8_2_BUTTON
+};
+
+static struct rzv2hgpio_dev_s   g_gpin[BOARD_NGPIOIN];
+#endif
+
+#if BOARD_NGPIOOUT > 0
+
+/* This array maps the GPIO pins used as OUTPUT */
+
+static const gpio_pinset_t      g_gpiooutputs[BOARD_NGPIOOUT] =
+{
+  BOARD_P0_0_GPIO, BOARD_P0_1_GPIO
+};
+
+static struct rzv2hgpio_dev_s   g_gpout[BOARD_NGPIOOUT];
+#endif
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+#if BOARD_NGPIOIN > 0
+
+/****************************************************************************
+ * Name: gpin_read
+ *
+ * Description:
+ *   Read the current logic state of an input GPIO pin and store the result
+ *   in the caller-provided boolean output value.
+ ****************************************************************************/
+
+static int gpin_read(struct gpio_dev_s *dev, bool *value)
+{
+  struct rzv2hgpio_dev_s *rzv2hgpio = (struct rzv2hgpio_dev_s *)dev;
+
+  DEBUGASSERT(rzv2hgpio != NULL && value != NULL);
+  DEBUGASSERT(rzv2hgpio->id < BOARD_NGPIOIN);
+  gpioinfo("Reading...");
+
+  *value = rzv2h_gpioread(g_gpioinputs[rzv2hgpio->id]);
+
+  return OK;
+}
+
+/****************************************************************************
+ * Name: gpin_attach
+ *
+ * Description:
+ *   Register an interrupt callback for a GPIO input pin. The callback is
+ *   stored for later use when the interrupt is enabled.
+ *   Refer to drivers/ioexpander/gpio.c for the reference implementation.
+ ****************************************************************************/
+
+static int gpin_attach(struct gpio_dev_s *dev, pin_interrupt_t callback)
+{
+  struct rzv2hgpint_dev_s *rzv2hgpint = (struct rzv2hgpint_dev_s *)dev;
+
+  gpioinfo("Attaching the callback\n");
+
+  /* Make sure the interrupt is disabled */
+
+  /* Assign Callback function */
+
+  gpioinfo("Attach %p\n", callback);
+  rzv2hgpint->callback = callback;
+  return OK;
+}
+
+/****************************************************************************
+ * Name: gpin_enable
+ *
+ * Description:
+ *   Enable or disable the interrupt handling for an input GPIO pin.
+ *   The current implementation only tracks the requested state.
+ ****************************************************************************/
+
+static int gpin_enable(struct gpio_dev_s *dev, bool enable)
+{
+  struct rzv2hgpint_dev_s *rzv2hgpint = (struct rzv2hgpint_dev_s *)dev;
+
+  if (enable && rzv2hgpint->callback != NULL)
+    {
+      gpioinfo("Enabling the interrupt\n");
+    }
+  else
+    {
+      gpioinfo("Disable the interrupt\n");
+    }
+
+  return OK;
+}
+
+#endif
+
+#if BOARD_NGPIOOUT > 0
+
+/****************************************************************************
+ * Name: gpout_read
+ *
+ * Description:
+ *   Read the current logic state of an output GPIO pin and return it through
+ *   the caller-provided boolean output value.
+ ****************************************************************************/
+
+static int gpout_read(struct gpio_dev_s *dev, bool *value)
+{
+  struct rzv2hgpio_dev_s *rzv2hgpio = (struct rzv2hgpio_dev_s *)dev;
+
+  DEBUGASSERT(rzv2hgpio != NULL && value != NULL);
+  DEBUGASSERT(rzv2hgpio->id < BOARD_NGPIOOUT);
+  gpioinfo("Reading...");
+
+  *value = rzv2h_gpioread(g_gpiooutputs[rzv2hgpio->id]);
+
+  return OK;
+}
+
+/****************************************************************************
+ * Name: gpout_write
+ *
+ * Description:
+ *   Drive an output GPIO pin to the requested logic state.
+ ****************************************************************************/
+
+static int gpout_write(struct gpio_dev_s *dev, bool value)
+{
+  struct rzv2hgpio_dev_s *rzv2hgpio = (struct rzv2hgpio_dev_s *)dev;
+
+  DEBUGASSERT(rzv2hgpio != NULL);
+  DEBUGASSERT(rzv2hgpio->id < BOARD_NGPIOOUT);
+  gpioinfo("Writing %d", (int)value);
+
+  return rzv2h_gpiowrite(g_gpiooutputs[rzv2hgpio->id], value);
+}
+
+#endif
+
+/****************************************************************************
+ * Name: gpio_setpintype
+ *
+ * Description:
+ *   Set the pin type for a GPIO device. This implementation is currently
+ *   unsupported and returns success without changing hardware state.
+ ****************************************************************************/
+
+static int gpio_setpintype(struct gpio_dev_s *dev,
+                           enum gpio_pintype_e gpio_pintype)
+{
+  struct rzv2hgpio_dev_s *rzv2hgpio = (struct rzv2hgpio_dev_s *)dev;
+
+  UNUSED(rzv2hgpio);
+  UNUSED(gpio_pintype);
+
+  gpioinfo("setpintype is not supported. \n");
+
+  return 0;
+}
+
+/****************************************************************************
+ * Name: rzv2h_gpio_initialize
+ *
+ * Description:
+ *   Initialize GPIO drivers for use with /apps/examples/gpio
+ ****************************************************************************/
+
+int rzv2h_gpio_initialize(void)
+{
+  int   pincount = 0;
+  int   i;
+  int   ret = 0;
+
+#if BOARD_NGPIOIN > 0
+  for (i = 0; i < BOARD_NGPIOIN; i++, pincount++)
+    {
+      /* Setup and register the GPIO pin */
+
+      g_gpin[i].gpio.gp_pintype = GPIO_INPUT_PIN;
+      g_gpin[i].gpio.gp_ops     = &gpin_ops;
+      g_gpin[i].id              = i;
+      ret                       =
+        gpio_pin_register(&g_gpin[i].gpio, pincount);
+      if (ret < 0)
+        {
+          gpioerr("GPIOIN(%d): gpio_pin_register failed: %d", i, ret);
+          return ret;
+        }
+
+      /* Configure the pin that will be used as input */
+
+      ret = rzv2h_configgpio(g_gpioinputs[i]);
+      if (ret < 0)
+        {
+          gpioerr("GPIOIN(%d): rzv2h_configgpio failed: %d", i, ret);
+          return ret;
+        }
+    }
+#endif
+
+#if BOARD_NGPIOOUT > 0
+  for (i = 0; i < BOARD_NGPIOOUT; i++, pincount++)
+    {
+      /* Setup and register the GPIO pin */
+
+      g_gpout[i].gpio.gp_pintype    = GPIO_OUTPUT_PIN;
+      g_gpout[i].gpio.gp_ops        = &gpout_ops;
+      g_gpout[i].id                 = i;
+      ret                           = gpio_pin_register(&g_gpout[i].gpio,
+                                                        pincount);
+      if (ret < 0)
+        {
+          gpioerr("GPIOOUT(%d): gpio_pin_register failed: %d", i, ret);
+          return ret;
+        }
+
+      /* Configure the pin that will be used as output */
+
+      ret = rzv2h_configgpio(g_gpiooutputs[i]);
+      if (ret < 0)
+        {
+          gpioerr("GPIOOUT(%d): rzv2h_configgpio failed: %d", i, ret);
+          return ret;
+        }
+    }
+#endif
+
+  return ret;
+}
+
+#endif  /* CONFIG_RZV2H_GPIO */
diff --git a/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_userleds.c 
b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_userleds.c
new file mode 100644
index 00000000000..90390ccf72e
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-evk/src/rzv2h_userleds.c
@@ -0,0 +1,103 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-evk/src/rzv2h_userleds.c
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <nuttx/debug.h>
+
+#include "chip.h"
+#include "rzv2h_gpio.h"
+#include "rzv2h-evk.h"
+
+#include <arch/board/board.h>
+
+#ifndef CONFIG_ARCH_LEDS
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_userled_initialize
+ ****************************************************************************/
+
+uint32_t board_userled_initialize(void)
+{
+  /* Configure LED GPIOs for output */
+
+  rzv2h_configgpio(BOARD_P0_0_GPIO);
+  rzv2h_configgpio(BOARD_P0_1_GPIO);
+
+  /* The LEDs are active low.  Leave both LEDs off after initialization. */
+
+  rzv2h_gpiowrite(BOARD_P0_0_GPIO, true);
+  rzv2h_gpiowrite(BOARD_P0_1_GPIO, true);
+  return BOARD_NLEDS;
+}
+
+/****************************************************************************
+ * Name: board_userled
+ ****************************************************************************/
+
+void board_userled(int led, bool ledon)
+{
+  gpio_pinset_t ledcfg;
+
+  if (led == BOARD_LED_0)
+    {
+      ledcfg = BOARD_P0_0_GPIO;
+    }
+  else if (led == BOARD_LED_1)
+    {
+      ledcfg = BOARD_P0_1_GPIO;
+    }
+  else
+    {
+      return;
+    }
+
+  /* Low illuminates. */
+
+  rzv2h_gpiowrite(ledcfg, !ledon);
+}
+
+/****************************************************************************
+ * Name: board_userled_all
+ ****************************************************************************/
+
+void board_userled_all(uint32_t ledset)
+{
+  /* Low illuminates. */
+
+  rzv2h_gpiowrite(BOARD_P0_0_GPIO,
+                   (ledset & BOARD_LED_0_BIT) == 0);
+  rzv2h_gpiowrite(BOARD_P0_1_GPIO,
+                   (ledset & BOARD_LED_1_BIT) == 0);
+}
+
+#endif /* !CONFIG_ARCH_LEDS */
diff --git a/boards/arm/rzv2h/rzv2h-rdk/CMakeLists.txt 
b/boards/arm/rzv2h/rzv2h-rdk/CMakeLists.txt
new file mode 100644
index 00000000000..f541d094be4
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/CMakeLists.txt
@@ -0,0 +1,23 @@
+# 
##############################################################################
+# boards/arm/rzv/rzv2h-rdk/CMakeLists.txt
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more 
contributor
+# license agreements.  See the NOTICE file distributed with this work for
+# additional information regarding copyright ownership.  The ASF licenses this
+# file to you under the Apache License, Version 2.0 (the "License"); you may 
not
+# use this file except in compliance with the License.  You may obtain a copy 
of
+# the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+# License for the specific language governing permissions and limitations under
+# the License.
+#
+# 
##############################################################################
+
+add_subdirectory(src)
diff --git a/boards/arm/rzv2h/rzv2h-rdk/Kconfig 
b/boards/arm/rzv2h/rzv2h-rdk/Kconfig
new file mode 100644
index 00000000000..99147eed1ca
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/Kconfig
@@ -0,0 +1,22 @@
+# 
##############################################################################
+# boards/arm/rzv/rzv2h-rdk/Kconfig
+#
+# Kconfig for the RZV2H_RDK board support package for the RZV2H MPU.
+#
+if ARCH_BOARD_RZV2H_RDK
+
+config BOARD_RZV2H_RDK
+    bool "RZV2H-RDK Board Support"
+    help
+      Enable support for the RZV2H-RDK board based on the RZV2H MPU.
+
+endif
+
+config RZV2H_EXAMPLE_SUPPORT
+    bool "RZV2H-RDK Example Support"
+    default y
+    depends on ARCH_BOARD_RZV2H_RDK
+    help
+      Enable support for various application examples for the RZV2H-RDK board.
+
+# 
##############################################################################
diff --git a/boards/arm/rzv2h/rzv2h-rdk/configs/nsh-leds/defconfig 
b/boards/arm/rzv2h/rzv2h-rdk/configs/nsh-leds/defconfig
new file mode 100644
index 00000000000..d33b63f3c6d
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/configs/nsh-leds/defconfig
@@ -0,0 +1,52 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed 
.config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that 
includes your
+# modifications.
+#
+# CONFIG_ARCH_LEDS is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD="rzv2h-rdk"
+CONFIG_ARCH_BOARD_RZV2H_RDK=y
+CONFIG_ARCH_CHIP="rzv2h"
+CONFIG_ARCH_CHIP_R9A09G057=y
+CONFIG_ARCH_CHIP_RZV2H=y
+CONFIG_ARCH_INTERRUPTSTACK=2048
+CONFIG_ARCH_LOWVECTORS=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7R_DCACHE_DISABLE=y
+CONFIG_ARMV7R_ICACHE_DISABLE=y
+CONFIG_ARM_MPU=y
+CONFIG_ARM_MPU_NREGIONS=6
+CONFIG_ARM_THUMB=y
+CONFIG_BINFMT_DISABLE=y
+CONFIG_BOARD_LOOPSPERMSEC=200000
+CONFIG_BUILTIN=y
+CONFIG_DEV_GPIO=y
+CONFIG_EXAMPLES_LEDS=y
+CONFIG_FS_PROCFS=y
+CONFIG_IDLETHREAD_STACKSIZE=2048
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INTELHEX_BINARY=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_READLINE=y
+CONFIG_RAM_SIZE=524288
+CONFIG_RAM_START=0x08180000
+CONFIG_RAW_BINARY=y
+CONFIG_RZV2H_CORTEXR8_0=y
+CONFIG_RZV2H_SCI_B_UART0=y
+CONFIG_SCHED_WAITPID=y
+CONFIG_SCI0_SERIAL_CONSOLE=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SERIAL_TIOCGICOUNT=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_START_DAY=29
+CONFIG_START_MONTH=7
+CONFIG_START_YEAR=2026
+CONFIG_SYSTEM_NSH=y
+CONFIG_TTY_SIGINT=y
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERLED=y
+CONFIG_USERLED_LOWER=y
diff --git a/boards/arm/rzv2h/rzv2h-rdk/configs/nsh/defconfig 
b/boards/arm/rzv2h/rzv2h-rdk/configs/nsh/defconfig
new file mode 100644
index 00000000000..e6842622f67
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/configs/nsh/defconfig
@@ -0,0 +1,52 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed 
.config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that 
includes your
+# modifications.
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD="rzv2h-rdk"
+CONFIG_ARCH_BOARD_RZV2H_RDK=y
+CONFIG_ARCH_CHIP="rzv2h"
+CONFIG_ARCH_CHIP_R9A09G057=y
+CONFIG_ARCH_CHIP_RZV2H=y
+CONFIG_ARCH_INTERRUPTSTACK=2048
+CONFIG_ARCH_LOWVECTORS=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7R_DCACHE_DISABLE=y
+CONFIG_ARMV7R_ICACHE_DISABLE=y
+CONFIG_ARM_MPU=y
+CONFIG_ARM_MPU_NREGIONS=6
+CONFIG_ARM_THUMB=y
+CONFIG_BINFMT_DISABLE=y
+CONFIG_BOARD_LOOPSPERMSEC=200000
+CONFIG_BUILTIN=y
+CONFIG_DEV_GPIO=y
+CONFIG_EXAMPLES_GPIO=y
+CONFIG_FS_PROCFS=y
+CONFIG_IDLETHREAD_STACKSIZE=2048
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INTELHEX_BINARY=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_READLINE=y
+CONFIG_RAM_SIZE=524288
+CONFIG_RAM_START=0x08180000
+CONFIG_RAW_BINARY=y
+CONFIG_RZV2H_CORTEXR8_0=y
+CONFIG_RZV2H_SCI_B_UART0=y
+CONFIG_SCHED_WAITPID=y
+CONFIG_SCI0_SERIAL_CONSOLE=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SERIAL_TIOCGICOUNT=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_START_DAY=29
+CONFIG_START_MONTH=7
+CONFIG_START_YEAR=2026
+CONFIG_SYSTEM_NSH=y
+CONFIG_TESTING_OSTEST=y
+CONFIG_TESTING_OSTEST_NBARRIER_THREADS=3
+CONFIG_TESTING_OSTEST_STACKSIZE=2048
+CONFIG_TTY_SIGINT=y
+CONFIG_USEC_PER_TICK=1000
diff --git a/boards/arm/rzv2h/rzv2h-rdk/include/board.h 
b/boards/arm/rzv2h/rzv2h-rdk/include/board.h
new file mode 100644
index 00000000000..0a34e0462d4
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/include/board.h
@@ -0,0 +1,151 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-rdk/include/board.h
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+#ifndef __BOARDS_ARM_RZV2H_RZV2H_RDK_INCLUDE_BOARD_H
+#define __BOARDS_ARM_RZV2H_RZV2H_RDK_INCLUDE_BOARD_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* GPIO definitions *********************************************************/
+
+#define BOARD_NGPIOOUT          2
+#define BOARD_NGPIOIN           1
+
+/* LED index values for use with board_userled() */
+
+#define BOARD_LED_0             0
+#define BOARD_LED_1             1
+#define BOARD_NLEDS             2
+
+/* LED bits for use with board_userled_all() */
+
+#define BOARD_LED_0_BIT         (1 << BOARD_LED_0)
+#define BOARD_LED_1_BIT         (1 << BOARD_LED_1)
+
+/* LED pins */
+
+#define BOARD_P11_4_GPIO        GPIO_P11_4_OUTPUT_LOW
+#define BOARD_P11_5_GPIO        GPIO_P11_5_OUTPUT_LOW
+
+/* Button pin */
+
+#define BOARD_P10_0_BUTTON      GPIO_P10_0_INPUT_PULLDOWN
+
+/* GPIO Configuration */
+
+#define GPIO_P11_4_OUTPUT_LOW (gpio_pinset_t){BSP_IO_PORT_11_PIN_04, 
(IOPORT_CFG_DRIVE_B01 | IOPORT_CFG_PORT_DIRECTION_OUTPUT | 
IOPORT_CFG_PORT_OUTPUT_LOW | IOPORT_CFG_SLEW_RATE_FAST)}
+#define GPIO_P11_5_OUTPUT_LOW (gpio_pinset_t){BSP_IO_PORT_11_PIN_05, 
(IOPORT_CFG_DRIVE_B01 | IOPORT_CFG_PORT_DIRECTION_OUTPUT | 
IOPORT_CFG_PORT_OUTPUT_LOW | IOPORT_CFG_SLEW_RATE_FAST)}
+#define GPIO_P10_0_INPUT_PULLDOWN (gpio_pinset_t){BSP_IO_PORT_10_PIN_00, 
(IOPORT_CFG_PORT_DIRECTION_INPUT | IOPORT_CFG_SPECIAL_PURPOSE_PORT_INPUT_ENABLE 
| IOPORT_CFG_PULLDOWN_ENABLE)}
+
+/* In this stage, autoled is not supported */
+
+#define LED_STARTED         0
+#define LED_HEAPALLOCATE    0
+#define LED_IRQSENABLED     0
+#define LED_STACKCREATED    0
+#define LED_INIRQ           0
+#define LED_SIGNAL          0
+#define LED_ASSERTION       0
+#define LED_PANIC           0
+
+/* Peripheral definitions ***************************************************/
+
+/* SCI0 is used as the default NSH console interface */
+
+#define BOARD_CONSOLE_UART        0       /* Use SCI0 for console */
+#define BOARD_CONSOLE_BAUD        115200
+#define BOARD_CONSOLE_BITS        8
+#define BOARD_CONSOLE_PARITY      0
+#define BOARD_CONSOLE_2STOP       0
+
+/* SCI-B UART pins */
+
+#define BOARD_SCI0_TXD_GPIO   GPIO_TXD0_MOSI0_DA0_P5_0_M1
+#define BOARD_SCI0_RXD_GPIO   GPIO_RXD0_MISO0_SCL0_P5_1_M1
+#define BOARD_SCI1_TXD_GPIO   GPIO_TXD1_MOSI1_SDA1_P5_2_M1
+#define BOARD_SCI1_RXD_GPIO   GPIO_RXD1_MISO1_SCL1_P5_3_M1
+#define BOARD_SCI2_TXD_GPIO   GPIO_TXD2_MOSI2_SDA2_P5_4_M1
+#define BOARD_SCI2_RXD_GPIO   GPIO_RXD2_MISO2_SCL2_P5_5_M1
+#define BOARD_SCI3_TXD_GPIO   GPIO_TXD3_MOSI3_SDA3_P5_6_M1
+#define BOARD_SCI3_RXD_GPIO   GPIO_RXD3_MISO3_SCL3_P5_7_M1
+
+#define BOARD_SCI4_TXD_GPIO   GPIO_TXD4_MOSI4_SDA4_P8_4_M6
+#define BOARD_SCI4_RXD_GPIO   GPIO_RXD4_MISO4_SCL4_P8_5_M6
+#define BOARD_SCI5_TXD_GPIO   GPIO_TXD5_MOSI5_SDA5_P7_2_M1
+#define BOARD_SCI5_RXD_GPIO   GPIO_RXD5_MISO5_SCL5_P7_3_M1
+#define BOARD_SCI6_TXD_GPIO   GPIO_TXD6_MOSI6_SDA6_P7_4_M1
+#define BOARD_SCI6_RXD_GPIO   GPIO_RXD6_MISO6_SCL6_P7_5_M1
+#define BOARD_SCI7_TXD_GPIO   GPIO_TXD7_MOSI7_SDA7_P7_6_M1
+#define BOARD_SCI7_RXD_GPIO   GPIO_RXD7_MISO7_SCL7_P7_7_M1
+#define BOARD_SCI8_TXD_GPIO   GPIO_TXD8_MOSI8_SDA6_P9_0_M2
+#define BOARD_SCI8_RXD_GPIO   GPIO_RXD8_MISO8_SCL6_P9_1_M2
+#define BOARD_SCI9_TXD_GPIO   GPIO_TXD9_MOSI9_SDA9_P8_2_M6
+#define BOARD_SCI9_RXD_GPIO   GPIO_RXD9_MISO9_SCL9_P8_3_M6
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/****************************************************************************
+ * Name: rzv2h_board_initialize
+ *
+ * Description:
+ *   All RZV2H architectures must provide the following entry point. This
+ *   entry point is called early in the initialization -- after clocking
+ *   and memory have been configured but before caches have been enabled
+ *   and before any devices have been initialized.
+ *
+ ****************************************************************************/
+
+void rzv2h_board_initialize(void);
+
+/****************************************************************************
+ * Name: rzv2h_serial_setup
+ *
+ * Description:
+ *   Configure the board used by the enabled SCI UART channels.
+ *
+ ****************************************************************************/
+
+void rzv2h_serial_setup(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __BOARDS_ARM_RZV2H_RZV2H_RDK_INCLUDE_BOARD_H */
diff --git a/boards/arm/rzv2h/rzv2h-rdk/scripts/Make.defs 
b/boards/arm/rzv2h/rzv2h-rdk/scripts/Make.defs
new file mode 100644
index 00000000000..c8e62680d7a
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/scripts/Make.defs
@@ -0,0 +1,98 @@
+############################################################################
+# boards/arm/rzv2h/rzv2h-rdk/scripts/Make.defs
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.  The
+# ASF licenses this file to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance with the
+# License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+# License for the specific language governing permissions and limitations
+# under the License.
+#
+############################################################################
+
+include $(TOPDIR)/.config
+include $(TOPDIR)/tools/Config.mk
+include $(TOPDIR)/arch/arm/src/armv7-r/Toolchain.defs
+
+# Determine linker script based on build type
+ifeq ($(CONFIG_RZV2H_CORTEXR8_0),y)
+  LDSCRIPT = rzv2h-rdk_cr8_0.ld
+endif
+
+ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
+
+# Compile flags
+CFLAGS := $(ARCHCFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) 
$(ARCHDEFINES) $(EXTRAFLAGS) -pipe -Wno-undef
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS := $(ARCHCXXFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) 
$(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS := $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS)
+AFLAGS := $(CFLAGS) -D__ASSEMBLY__
+
+# Linker flags
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) 
-T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+# ELF module flags
+LDELFFLAGS = -r -e main
+ifeq ($(CONFIG_CYGWIN_WINTOOL),y)
+  LDELFFLAGS += -T "${shell cygpath -w 
$(BOARD_DIR)$(DELIM)scripts$(DELIM)gnu-elf.ld}"
+else
+  LDELFFLAGS += -T $(BOARD_DIR)$(DELIM)scripts$(DELIM)gnu-elf.ld
+endif
+
+# Board-specific flags
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
+HOSTLDFLAGS =
+
+#hal renesas include
+HAL_INDIR = 
$(TOPDIR)$(DELIM)arch$(DELIM)$(CONFIG_ARCH)$(DELIM)src$(DELIM)common$(DELIM)renesas$(DELIM)hal_renesas
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)inc
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)inc$(DELIM)instances
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)inc$(DELIM)instances$(DELIM)rzv
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)inc$(DELIM)api
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)src$(DELIM)rzv$(DELIM)bsp$(DELIM)mcu$(DELIM)rzv2h
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)src$(DELIM)rzv$(DELIM)bsp$(DELIM)mcu$(DELIM)all
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)src$(DELIM)rzv$(DELIM)bsp$(DELIM)mcu$(DELIM)all$(DELIM)cr
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)drivers$(DELIM)rz$(DELIM)fsp$(DELIM)src$(DELIM)rzv$(DELIM)bsp$(DELIM)cmsis$(DELIM)Device$(DELIM)RENESAS$(DELIM)Include
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)rz$(DELIM)rz_cfg$(DELIM)fsp_cfg
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)rz$(DELIM)rz_cfg$(DELIM)fsp_cfg$(DELIM)bsp
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)rz$(DELIM)rz_cfg$(DELIM)fsp_cfg$(DELIM)bsp$(DELIM)rzv2h
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)rz$(DELIM)rz_cfg$(DELIM)fsp_cfg$(DELIM)bsp$(DELIM)rzv2h$(DELIM)cr
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)rz$(DELIM)rz_cfg$(DELIM)fsp_cfg$(DELIM)rzv
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)rz$(DELIM)portable$(DELIM)rzv
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)rz$(DELIM)portable$(DELIM)rzv$(DELIM)cr
+CFLAGS += $(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)cmsis
+CFLAGS += 
$(INCDIR_PREFIX)$(HAL_INDIR)$(DELIM)nuttx$(DELIM)cmsis$(DELIM)include$(DELIM)cr
+
+# Generate the raw image U-Boot loads at CONFIG_RAM_START before starting
+# CR8_0 from reset.  Select the SRAM sections explicitly so distant NOLOAD
+# OpenAMP regions can never create padding in the raw binary.  .vectors runs
+# from ITCM, but its load copy is the first thing in RAM and the U-Boot reset
+# trampoline in ITCM jumps to it, so it has to be in the image; without it
+# nuttx_uboot.bin would also start at .text instead of at CONFIG_RAM_START.
+
+ifeq ($(CONFIG_RZV2H_UBOOT_IMAGE),y)
+define POSTBUILD
+       @echo "CP: nuttx_uboot.bin"
+       $(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary \
+               --only-section=.vectors --only-section=.text \
+               --only-section=.init_section \
+               --only-section=.ARM.extab --only-section=.ARM.exidx \
+               --only-section=.data $(BIN) nuttx_uboot.bin
+       $(Q) echo nuttx_uboot.bin >> nuttx.manifest
+endef
+endif
diff --git a/boards/arm/rzv2h/rzv2h-rdk/scripts/rzv2h-rdk_cr8_0.ld 
b/boards/arm/rzv2h/rzv2h-rdk/scripts/rzv2h-rdk_cr8_0.ld
new file mode 100644
index 00000000000..7647ad51166
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/scripts/rzv2h-rdk_cr8_0.ld
@@ -0,0 +1,224 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-rdk/scripts/rzv2h-rdk_cr8_0.ld
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+/*
+ * RZ/V2H Cortex-R8_0 linker script for NuttX.
+ *
+ */
+
+/* Core-local TCM map of the RZ/V2H CR8, from the Renesas HAL
+ * [FSP: bsp_slave_address.h:19-25]:
+ *
+ *   ITCM  core 0x00000000, 128 KB, AXI alias 0x12040000
+ *   DTCM  core 0x00020000, 128 KB, AXI alias 0x12060000
+ *
+ * Both build types keep a load copy of the vector table at the start of
+ * RAM, which arm_boot() copies to ITCM.  CR8_0 takes its reset vector from
+ * ITCM, so before releasing CR8_0 from reset U-Boot writes a fixed two-word
+ * trampoline there through the AXI alias:
+ *
+ *   0x0: 0xe51ff004  ldr pc, [pc, #-4]
+ *   0x4: 0x08180000  ORIGIN(RAM), the load copy of the table
+ *
+ * The reset slot of the load copy then branches to __start.  A
+ * debugger-loaded image is entered at __start directly; ITCM is not mapped
+ * until arm_boot() programs the ATCM region register.
+ */
+
+MEMORY
+{
+    ITCM (rwx)     : ORIGIN = 0x00000000, LENGTH = 128K
+    DTCM (rwx)     : ORIGIN = 0x00020000, LENGTH = 128K
+    RAM  (rwx)     : ORIGIN = 0x08180000, LENGTH = 512K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vector_start)
+ENTRY(__start)
+
+/* Start of the read-only SRAM part of the image.  Everything from here up to
+ * __mpu_code_end (the vector load image, .text, .rodata, .init_section and
+ * .ARM.exidx) is covered by one MPU region programmed
+ * RO + executable; see g_mpu_region_table[] in
+ * arch/arm/src/rzv2h/rzv2h_mpu_region.c.
+ */
+
+__mpu_code_start = ABSOLUTE(ORIGIN(RAM));
+
+SECTIONS
+{
+
+    /* The table always has a load copy at the start of RAM, at
+     * _vector_load, which arm_boot() copies to VECTOR_ADDRESS (ITCM).
+     *
+     * The U-Boot image links the table at its ITCM run address and stores
+     * it in RAM (AT> RAM), so nuttx_uboot.bin starts with it.  CR8_0
+     * reaches it at reset through the U-Boot trampoline described at the
+     * top of this file, so the load copy has to stay at ORIGIN(RAM).
+     *
+     * The debugger image links the table in RAM.  That works because the
+     * table is position independent: its branch slots are PC-relative and
+     * its handler entries contain absolute addresses.
+     */
+
+    .vectors :
+    {
+        . = ALIGN(32);
+        _vector_start = ABSOLUTE(.);
+        KEEP(*(.vectors))
+        _vector_end = ABSOLUTE(.);
+#ifdef CONFIG_RZV2H_UBOOT_IMAGE
+    } > ITCM AT> RAM
+#else
+    } > RAM
+#endif
+
+    /* Where the table is stored in the image, as opposed to _vector_start,
+     * where it runs.  The two are equal in debugger builds.
+     */
+
+    _vector_load = LOADADDR(.vectors);
+
+#ifdef CONFIG_RZV2H_UBOOT_IMAGE
+    ASSERT(_vector_load == ORIGIN(RAM),
+           "U-Boot reset trampoline expects .vectors at ORIGIN(RAM)")
+#endif
+    .text :
+    {
+        . = ALIGN(4);
+        _stext = ABSOLUTE(.);
+        *(.text .text.*)
+        *(.fixup)
+        *(.gnu.warning)
+        *(.rodata .rodata.*)
+        *(.gnu.linkonce.t.*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.got)
+        *(.gcc_except_table)
+        *(.gnu.linkonce.r.*)
+        _etext = ABSOLUTE(.);
+    } > RAM
+
+    .init_section :
+    {
+        . = ALIGN(4);
+        _sinit = ABSOLUTE(.);
+        KEEP(*(SORT_BY_INIT_PRIORITY(.init_array.*) 
SORT_BY_INIT_PRIORITY(.ctors.*)))
+        KEEP(*(.init_array EXCLUDE_FILE(*crtbegin.o *crtbegin?.o *crtend.o 
*crtend?.o) .ctors))
+        _einit = ABSOLUTE(.);
+    } > RAM
+
+    .dtcm (NOLOAD) :
+    {
+        __HeapBase = .;
+        KEEP(*(.heap))
+        __HeapLimit = .;
+        KEEP(*(.stack))
+        KEEP(*(.stack.*))
+    } > DTCM
+
+    .ARM.extab :
+    {
+        *(.ARM.extab*)
+    } > RAM
+
+    PROVIDE_HIDDEN (__exidx_start = .);
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > RAM
+    PROVIDE_HIDDEN (__exidx_end = .);
+
+    /* Round the read-only part of the image up to a power of two.
+     *
+     * The MPU region that makes this range executable and read-only has to
+     * obey PMSAv7: the size must be 2^n and the base must be a multiple of
+     * that size.  Padding to 2^n here means mpu_modify_region() finds an
+     * exact fit and needs no sub-region disable mask, so the region cannot
+     * silently spill over into .data - which would make every write to a
+     * global fault.  The base needs no work: ORIGIN(RAM) is 512 KB aligned,
+     * so it is aligned to any 2^n <= 512 KB.
+     *
+     * The padding has to happen inside an output section attached to RAM.
+     * Assignments to "." outside of an output section move the location
+     * counter but do NOT move the allocation pointer of the memory region,
+     * so the next "> RAM" section would be placed back at the unpadded
+     * address and only the symbols would move.
+     *
+     * (NOLOAD) keeps the padding out of the ELF file itself; it still
+     * occupies address space, which is all that is needed here.
+     *
+     * LOG2CEIL() is a GNU ld builtin (binutils >= 2.29).
+     */
+
+    .rom_region_pad (NOLOAD) :
+    {
+        . = ALIGN(32);
+        . = ALIGN(1 << LOG2CEIL(ABSOLUTE(.) - __mpu_code_start));
+    } > RAM
+
+    __mpu_code_end = ABSOLUTE(.);
+
+    _eronly = ABSOLUTE(.);
+
+    .data :
+    {
+        _sdata = ABSOLUTE(.);
+        *(.data .data.*)
+        *(.gnu.linkonce.d.*)
+        CONSTRUCTORS
+        . = ALIGN(4);
+        _edata = ABSOLUTE(.);
+    } > RAM
+
+    .bss :
+    {
+        _sbss = ABSOLUTE(.);
+        *(.bss .bss.*)
+        *(.gnu.linkonce.b.*)
+        *(COMMON)
+        . = ALIGN(4);
+        _ebss = ABSOLUTE(.);
+    } > RAM
+
+    /* The padding above is not linear: crossing 128 KB of code costs another
+     * 128 KB of SRAM, taken straight out of the heap.  Fail the link instead
+     * of losing a quarter of the RAM silently.
+     */
+
+    /* Stabs debugging sections. */
+    .stab 0 : { *(.stab) }
+    .stabstr 0 : { *(.stabstr) }
+    .stab.excl 0 : { *(.stab.excl) }
+    .stab.exclstr 0 : { *(.stab.exclstr) }
+    .stab.index 0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment 0 : { *(.comment) }
+    .debug_abbrev 0 : { *(.debug_abbrev) }
+    .debug_info 0 : { *(.debug_info) }
+    .debug_line 0 : { *(.debug_line) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/boards/arm/rzv2h/rzv2h-rdk/src/CMakeLists.txt 
b/boards/arm/rzv2h/rzv2h-rdk/src/CMakeLists.txt
new file mode 100644
index 00000000000..24497a91e4b
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/src/CMakeLists.txt
@@ -0,0 +1,58 @@
+# 
##############################################################################
+# boards/arm/rzv2h/rzv2h-rdk/src/CMakeLists.txt
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more 
contributor
+# license agreements.  See the NOTICE file distributed with this work for
+# additional information regarding copyright ownership.  The ASF licenses this
+# file to you under the Apache License, Version 2.0 (the "License"); you may 
not
+# use this file except in compliance with the License.  You may obtain a copy 
of
+# the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+# License for the specific language governing permissions and limitations under
+# the License.
+#
+# 
##############################################################################
+
+# Core board initialization files
+set(SRCS rzv2h_boot.c rzv2h_bringup.c)
+
+# Application examples support
+if(CONFIG_RZV2H_EXAMPLE_SUPPORT)
+  list(APPEND SRCS rzv2h_appexamples.c)
+endif()
+
+# Board-specific initialization
+if(CONFIG_BOARDCTL)
+  list(APPEND SRCS rzv2h_appinit.c)
+endif()
+
+if(CONFIG_ARCH_BUTTONS)
+  list(APPEND SRCS rzv2h_buttons.c)
+endif()
+
+if(CONFIG_ARCH_LEDS)
+  list(APPEND SRCS rzv2h_autoleds.c)
+else()
+  list(APPEND SRCS rzv2h_userleds.c)
+endif()
+
+if(CONFIG_DEV_GPIO)
+  list(APPEND SRCS rzv2h_gpio.c)
+endif()
+
+# Peripheral driver initialization
+
+target_sources(board PRIVATE ${SRCS})
+
+# Set linker script based on core configuration
+if(CONFIG_RZV2H_CORTEXR8_0)
+  set_property(GLOBAL PROPERTY LD_SCRIPT
+                               "${NUTTX_BOARD_DIR}/scripts/rzv2h-rdk_cr8_0.ld")
+endif()
diff --git a/boards/arm/rzv2h/rzv2h-rdk/src/Makefile 
b/boards/arm/rzv2h/rzv2h-rdk/src/Makefile
new file mode 100644
index 00000000000..5d1115d19b3
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/src/Makefile
@@ -0,0 +1,69 @@
+############################################################################
+# boards/arm/rzv2h/rzv2h-rdk/src/Makefile
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.  The
+# ASF licenses this file to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance with the
+# License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+# License for the specific language governing permissions and limitations
+# under the License.
+#
+############################################################################
+
+include $(TOPDIR)/Make.defs
+
+############################################################################
+# Core board initialization files
+############################################################################
+
+CSRCS = rzv2h_boot.c rzv2h_bringup.c
+
+# Application examples support
+ifeq ($(CONFIG_RZV2H_EXAMPLE_SUPPORT),y)
+CSRCS += rzv2h_appexamples.c
+endif
+
+############################################################################
+# Board-specific initialization
+############################################################################
+
+# Application initialization
+ifeq ($(CONFIG_BOARDCTL),y)
+CSRCS += rzv2h_appinit.c
+endif
+
+# Button/Switch support
+ifeq ($(CONFIG_ARCH_BUTTONS),y)
+CSRCS += rzv2h_buttons.c
+endif
+
+# LED support
+ifeq ($(CONFIG_ARCH_LEDS),y)
+CSRCS += rzv2h_autoleds.c
+else
+CSRCS += rzv2h_userleds.c
+endif
+
+ifeq ($(CONFIG_DEV_GPIO),y)
+CSRCS += rzv2h_gpio.c
+endif
+
+############################################################################
+# Peripheral driver initialization
+############################################################################
+
+############################################################################
+# Example applications
+############################################################################
+
+include $(TOPDIR)/boards/Board.mk
diff --git a/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h-rdk.h 
b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h-rdk.h
new file mode 100644
index 00000000000..2304ee389b7
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h-rdk.h
@@ -0,0 +1,113 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-rdk/src/rzv2h-rdk.h
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+#ifndef __BOARDS_ARM_RZV2H_RZV2H_RDK_SRC_H
+#define __BOARDS_ARM_RZV2H_RZV2H_RDK_SRC_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <stdint.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+#define LED_DRIVER_PATH "/dev/userleds"
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Data
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: rzv2h_bringup
+ ****************************************************************************/
+
+int rzv2h_bringup(void);
+
+/****************************************************************************
+ * Name: rzv2h_gpio_initialize
+ *
+ * Description:
+ *   Initialize GPIO drivers for use with /apps/examples/gpio
+ *
+ * Return Value:
+ *   OK on success; a negated errno value on failure.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_DEV_GPIO
+int rzv2h_gpio_initialize(void);
+#endif
+
+/****************************************************************************
+ * Name: board_button_initialize
+ *
+ * Description:
+ *   Initialize buttons
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_ARCH_BUTTONS
+void board_button_initialize(void);
+#endif
+
+/****************************************************************************
+ * Name: rzv2h_appexamples
+ *
+ * Description:
+ *   Run all enabled board example applications
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: rzv2h_serial_setup
+ *
+ * Description:
+ *   Configure serial pins for UART operation
+ *
+ ****************************************************************************/
+
+void rzv2h_serial_setup(void);
+
+#ifdef CONFIG_RZV2H_EXAMPLE_SUPPORT
+int rzv2h_appexamples(void);
+#endif
+
+/****************************************************************************
+ * Example application initialization functions
+ ****************************************************************************/
+
+#endif /* __ASSEMBLY__ */
+#endif /* __BOARDS_ARM_RZV2H_RZV2H_RDK_SRC_H */
diff --git a/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_appexamples.c 
b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_appexamples.c
new file mode 100644
index 00000000000..2db8ff3497c
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_appexamples.c
@@ -0,0 +1,47 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_appexamples.c
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <errno.h>
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: rzv2h_appexamples
+ *
+ * Description:
+ *   Run all enabled board example applications
+ *
+ ****************************************************************************/
+
+int rzv2h_appexamples(void)
+{
+  /* Placeholder for board-specific examples */
+
+  return 0;
+}
diff --git a/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_appinit.c 
b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_appinit.c
new file mode 100644
index 00000000000..6b404c5ce88
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_appinit.c
@@ -0,0 +1,72 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_appinit.c
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nuttx/board.h>
+#include "rzv2h-rdk.h"
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ *   Perform application specific initialization.  This function is never
+ *   called directly from application code, but only indirectly via the
+ *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ *   arg - The boardctl() argument is passed to the board_app_initialize()
+ *         implementation without modification.  The argument has no
+ *         meaning to NuttX; the meaning of the argument is a contract
+ *         between the board-specific initialization logic and the
+ *         matching application logic.  The value could be such things as a
+ *         mode enumeration value, a set of DIP switch settings, a pointer
+ *         to configuration data read from a file or serial FLASH, or
+ *         whatever you would like to do with it.  Every implementation
+ *         should accept zero/NULL as a default configuration.
+ *
+ * Returned Value:
+ *   Zero (OK) is returned on success; a negated errno value is returned on
+ *   any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+
+int board_app_initialize(uintptr_t arg)
+{
+#ifdef CONFIG_BOARD_LATE_INITIALIZE
+  /* Board initialization already performed by board_late_initialize() */
+
+  return OK;
+#else
+  /* Perform board-specific initialization */
+
+  return rzv2h_bringup();
+#endif
+}
diff --git a/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_autoleds.c 
b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_autoleds.c
new file mode 100644
index 00000000000..c7db443da84
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_autoleds.c
@@ -0,0 +1,172 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_autoleds.c
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <assert.h>
+#include <debug.h>
+
+#include <nuttx/board.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "arm_internal.h"
+#include "rzv2h_gpio.h"
+
+#ifdef CONFIG_ARCH_LEDS
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/* This array maps LED numbers to GPIO configurations */
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: led_dumppins
+ ****************************************************************************/
+
+#ifdef LED_VERBOSE
+static void led_dumppins(const char *msg)
+{
+  (void)msg;
+}
+#else
+#  define led_dumppins(m)
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_autoled_initialize
+ *
+ * Description:
+ *   Initialize LED GPIOs so that LEDs can be controlled.
+ *
+ ****************************************************************************/
+
+void board_autoled_initialize(void)
+{
+  ;
+}
+
+/****************************************************************************
+ * Name: board_autoled_on
+ *
+ * Description:
+ *   Set the LED configuration into the ON condition for the state provided
+ *   by the led parameter.  This may be one of:
+ *
+ *   LED_STARTED       - NuttX has been started
+ *   LED_HEAPALLOCATE  - Heap has been allocated
+ *   LED_IRQSENABLED   - Interrupts enabled
+ *   LED_STACKCREATED  - Idle stack created
+ *   LED_INIRQ         - In an interrupt handler
+ *   LED_SIGNAL        - In a signal handler
+ *   LED_ASSERTION     - An assertion failed
+ *   LED_PANIC         - The system has crashed
+ *
+ ****************************************************************************/
+
+void board_autoled_on(int led)
+{
+  /* Active low LEDs: write 0 to turn ON */
+
+  (void)led;
+}
+
+/****************************************************************************
+ * Name: board_autoled_off
+ *
+ * Description:
+ *   Set the LED configuration into the OFF condition for the state provided
+ *   by the led parameter.
+ *
+ ****************************************************************************/
+
+void board_autoled_off(int led)
+{
+  /* Active low LEDs: write 1 to turn OFF */
+
+  (void)led;
+}
+
+#endif /* CONFIG_ARCH_LEDS */
+
+/****************************************************************************
+ * Name: board_userled_initialize
+ *
+ * Description:
+ *   If CONFIG_ARCH_LEDS is not defined, then the board can provide
+ *   application-controlled LED functionality via these functions.
+ *
+ ****************************************************************************/
+
+#ifndef CONFIG_ARCH_LEDS
+uint32_t board_userled_initialize(void)
+{
+  return 0;
+}
+
+/****************************************************************************
+ * Name: board_userled
+ *
+ * Description:
+ *   Set the LED to the on or off state
+ *
+ ****************************************************************************/
+
+void board_userled(int led, bool ledon)
+{
+  (void)led;
+  (void)ledon;
+}
+
+/****************************************************************************
+ * Name: board_userled_all
+ *
+ * Description:
+ *   Set the state of all LEDs
+ *
+ ****************************************************************************/
+
+void board_userled_all(uint32_t ledset)
+{
+  (void)ledset;
+}
+
+#endif /* !CONFIG_ARCH_LEDS */
diff --git a/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_boot.c 
b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_boot.c
new file mode 100644
index 00000000000..042309f1f75
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_boot.c
@@ -0,0 +1,145 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_boot.c
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+#include <stdint.h>
+
+#include <nuttx/board.h>
+#include <arch/board/board.h>
+
+#include "arm_internal.h"
+#include <arch/rzv2h/rzv2h_gpio.h>
+#include "rzv2h-rdk.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* GPIO Port Security Control registers base - RZV2H specific */
+#define RZV2H_GPIO_PMSAR_BASE       0x14030800  /* Port Mode Security 
Attribution */
+#define RZV2H_GPIO_PSCU_BASE        0x14030C00  /* Port Security Control Unit 
*/
+
+/* Number of GPIO ports in RZV2H (ports 0x20-0x2B = 12 ports) */
+#define RZV2H_GPIO_NPORTS           12
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: rzv2h_gpio_security_init
+ *
+ * Description:
+ *   Initialize GPIO port security attributes to secure mode (default).
+ *   Must be called before configuring any GPIO pins.
+ *   Based on FSP r_ioport security initialization.
+ *
+ ****************************************************************************/
+
+static void rzv2h_gpio_security_init(void)
+{
+#ifdef CONFIG_ARM_TRUSTZONE
+  volatile uint32_t *pmsar;
+  volatile uint32_t *pscu;
+  int port;
+
+  /* Initialize PMSAR (Port Mode Security Attribution Register)
+   * Set all pins to secure mode (0 = secure, 1 = non-secure)
+   */
+
+  pmsar = (volatile uint32_t *)RZV2H_GPIO_PMSAR_BASE;
+  for (port = 0; port < RZV2H_GPIO_NPORTS; port++)
+    {
+      pmsar[port] = 0x00000000;  /* All pins secure */
+    }
+
+  /* Initialize PSCU (Port Security Control Unit)
+   * Configure security control for each port
+   */
+
+  pscu = (volatile uint32_t *)RZV2H_GPIO_PSCU_BASE;
+  for (port = 0; port < RZV2H_GPIO_NPORTS; port++)
+    {
+      pscu[port] = 0x00000000;  /* Default security settings */
+    }
+
+  ARM_DSB();
+#endif
+}
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: rzv2h_board_initialize
+ *
+ * Description:
+ *   All RZV architectures must provide the following entry point.  This
+ *   entry point is called early in the initialization -- after clocks and
+ *   memory have been configured but before any devices have been
+ *   initialized.
+ *
+ *   This function is called from rzv_start.c during the boot sequence.
+ *
+ ****************************************************************************/
+
+void rzv2h_board_initialize(void)
+{
+  /* Initialize GPIO security attributes (TrustZone) */
+
+  rzv2h_gpio_security_init();
+
+  /* Configure SCI/UART pins for serial communication */
+
+#ifdef CONFIG_RZV2H_UART_SCI
+  rzv2h_serial_setup();
+#endif
+
+  /* Configure on-board LEDs if LED support has been selected */
+
+#ifdef CONFIG_ARCH_LEDS
+  board_autoled_initialize();
+#endif
+
+  /* Initialize any board-specific GPIO configurations */
+
+#ifdef CONFIG_BOARDCTL_IOCTL
+  /* Additional board-specific initialization can be done via ioctl */
+#endif
+}
+
+#ifdef CONFIG_BOARD_LATE_INITIALIZE
+void board_late_initialize(void)
+{
+  /* Perform board-specific initialization */
+
+  rzv2h_bringup();
+}
+
+#endif
diff --git a/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_bringup.c 
b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_bringup.c
new file mode 100644
index 00000000000..20734a82d0d
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_bringup.c
@@ -0,0 +1,87 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_bringup.c
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <sys/mount.h>
+#include <syslog.h>
+
+#include <nuttx/board.h>
+#include <nuttx/leds/userled.h>
+
+#include "rzv2h-rdk.h"
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: rzv2h_bringup
+ ****************************************************************************/
+
+int rzv2h_bringup(void)
+{
+  int ret = OK;
+
+#ifdef CONFIG_FS_PROCFS
+  /* Mount the procfs file system */
+
+  ret = mount(NULL, "/proc", "procfs", 0, NULL);
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, "ERROR: Failed to mount procfs at /proc: %d\n", ret);
+    }
+#endif
+
+#if defined(CONFIG_DEV_GPIO)
+  ret = rzv2h_gpio_initialize();
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, "ERROR: rzv2h_gpio_initialize() failed: %d\n", ret);
+      return ret;
+    }
+#endif
+
+#if !defined(CONFIG_ARCH_LEDS) && defined(CONFIG_USERLED_LOWER)
+  /* Register the user LED driver.  The generic lower half calls
+   * board_userled_initialize() before registering /dev/userleds.
+   */
+
+  ret = userled_lower_initialize(LED_DRIVER_PATH);
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, "ERROR: userled_lower_initialize() failed: %d\n", ret);
+      return ret;
+    }
+#endif
+
+  return OK;
+}
diff --git a/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_gpio.c 
b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_gpio.c
new file mode 100644
index 00000000000..69fa1adeb48
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_gpio.c
@@ -0,0 +1,337 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_gpio.c
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdbool.h>
+#include <assert.h>
+#include <nuttx/debug.h>
+#include <errno.h>
+
+#include <arch/board/board.h>
+#include <nuttx/ioexpander/gpio.h>
+
+#include "rzv2h_gpio.h"
+#include "hardware/rzv2h_pinmap.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+#ifdef CONFIG_RZV2H_GPIO
+
+struct rzv2hgpio_dev_s
+{
+  struct gpio_dev_s gpio;
+  uint8_t id;
+};
+
+struct rzv2hgpint_dev_s
+{
+  struct rzv2hgpio_dev_s rzv2hgpio;
+  pin_interrupt_t callback;
+};
+
+/****************************************************************************
+ * Private Functions Prototypes
+ ****************************************************************************/
+
+#if BOARD_NGPIOIN > 0
+static int gpin_read(struct gpio_dev_s *dev, bool *value);
+static int gpin_attach(struct gpio_dev_s *dev, pin_interrupt_t callback);
+static int gpin_enable(struct gpio_dev_s *dev, bool enable);
+
+#endif
+#if BOARD_NGPIOOUT > 0
+static int gpout_read(struct gpio_dev_s *dev, bool *value);
+static int gpout_write(struct gpio_dev_s *dev, bool value);
+
+#endif
+static int gpio_setpintype(struct gpio_dev_s *dev,
+                           enum gpio_pintype_e gpio_pintype);
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+#if BOARD_NGPIOIN > 0
+static const struct gpio_operations_s gpin_ops =
+{
+  .go_read      = gpin_read,   .go_write        = NULL,
+  .go_attach    = gpin_attach,
+  .go_enable    = gpin_enable, .go_setpintype   = gpio_setpintype,
+};
+#endif
+
+#if BOARD_NGPIOOUT > 0
+static const struct gpio_operations_s gpout_ops =
+{
+  .go_read      = gpout_read, .go_write            = gpout_write,
+  .go_attach    = NULL,
+  .go_enable    = NULL,       .go_setpintype       = gpio_setpintype,
+};
+#endif
+
+#if BOARD_NGPIOIN > 0
+
+/* This array maps the GPIO pins used as INPUT */
+
+static const gpio_pinset_t      g_gpioinputs[BOARD_NGPIOIN] =
+{
+  BOARD_P10_0_BUTTON
+};
+
+static struct rzv2hgpio_dev_s   g_gpin[BOARD_NGPIOIN];
+#endif
+
+#if BOARD_NGPIOOUT > 0
+
+/* This array maps the GPIO pins used as OUTPUT */
+
+static const gpio_pinset_t      g_gpiooutputs[BOARD_NGPIOOUT] =
+{
+  BOARD_P11_4_GPIO, BOARD_P11_5_GPIO
+};
+
+static struct rzv2hgpio_dev_s   g_gpout[BOARD_NGPIOOUT];
+#endif
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+#if BOARD_NGPIOIN > 0
+
+/****************************************************************************
+ * Name: gpin_read
+ *
+ * Description:
+ *   Read the current logic state of an input GPIO pin and store the result
+ *   in the caller-provided boolean output value.
+ ****************************************************************************/
+
+static int gpin_read(struct gpio_dev_s *dev, bool *value)
+{
+  struct rzv2hgpio_dev_s *rzv2hgpio = (struct rzv2hgpio_dev_s *)dev;
+
+  DEBUGASSERT(rzv2hgpio != NULL && value != NULL);
+  DEBUGASSERT(rzv2hgpio->id < BOARD_NGPIOIN);
+  gpioinfo("Reading...");
+
+  *value = rzv2h_gpioread(g_gpioinputs[rzv2hgpio->id]);
+
+  return OK;
+}
+
+/****************************************************************************
+ * Name: gpin_attach
+ *
+ * Description:
+ *   Register an interrupt callback for a GPIO input pin. The callback is
+ *   stored for later use when the interrupt is enabled.
+ *   Refer to drivers/ioexpander/gpio.c for the reference implementation.
+ ****************************************************************************/
+
+static int gpin_attach(struct gpio_dev_s *dev, pin_interrupt_t callback)
+{
+  struct rzv2hgpint_dev_s *rzv2hgpint = (struct rzv2hgpint_dev_s *)dev;
+
+  gpioinfo("Attaching the callback\n");
+
+  /* Make sure the interrupt is disabled */
+
+  /* Assign Callback function */
+
+  gpioinfo("Attach %p\n", callback);
+  rzv2hgpint->callback = callback;
+  return OK;
+}
+
+/****************************************************************************
+ * Name: gpin_enable
+ *
+ * Description:
+ *   Enable or disable the interrupt handling for an input GPIO pin.
+ *   The current implementation only tracks the requested state.
+ ****************************************************************************/
+
+static int gpin_enable(struct gpio_dev_s *dev, bool enable)
+{
+  struct rzv2hgpint_dev_s *rzv2hgpint = (struct rzv2hgpint_dev_s *)dev;
+
+  if (enable && rzv2hgpint->callback != NULL)
+    {
+      gpioinfo("Enabling the interrupt\n");
+    }
+  else
+    {
+      gpioinfo("Disable the interrupt\n");
+    }
+
+  return OK;
+}
+
+#endif
+
+#if BOARD_NGPIOOUT > 0
+
+/****************************************************************************
+ * Name: gpout_read
+ *
+ * Description:
+ *   Read the current logic state of an output GPIO pin and return it through
+ *   the caller-provided boolean output value.
+ ****************************************************************************/
+
+static int gpout_read(struct gpio_dev_s *dev, bool *value)
+{
+  struct rzv2hgpio_dev_s *rzv2hgpio = (struct rzv2hgpio_dev_s *)dev;
+
+  DEBUGASSERT(rzv2hgpio != NULL && value != NULL);
+  DEBUGASSERT(rzv2hgpio->id < BOARD_NGPIOOUT);
+  gpioinfo("Reading...");
+
+  *value = rzv2h_gpioread(g_gpiooutputs[rzv2hgpio->id]);
+
+  return OK;
+}
+
+/****************************************************************************
+ * Name: gpout_write
+ *
+ * Description:
+ *   Drive an output GPIO pin to the requested logic state.
+ ****************************************************************************/
+
+static int gpout_write(struct gpio_dev_s *dev, bool value)
+{
+  struct rzv2hgpio_dev_s *rzv2hgpio = (struct rzv2hgpio_dev_s *)dev;
+
+  DEBUGASSERT(rzv2hgpio != NULL);
+  DEBUGASSERT(rzv2hgpio->id < BOARD_NGPIOOUT);
+  gpioinfo("Writing %d", (int)value);
+
+  return rzv2h_gpiowrite(g_gpiooutputs[rzv2hgpio->id], value);
+}
+
+#endif
+
+/****************************************************************************
+ * Name: gpio_setpintype
+ *
+ * Description:
+ *   Set the pin type for a GPIO device. This implementation is currently
+ *   unsupported and returns success without changing hardware state.
+ ****************************************************************************/
+
+static int gpio_setpintype(struct gpio_dev_s *dev,
+                           enum gpio_pintype_e gpio_pintype)
+{
+  struct rzv2hgpio_dev_s *rzv2hgpio = (struct rzv2hgpio_dev_s *)dev;
+
+  UNUSED(rzv2hgpio);
+  UNUSED(gpio_pintype);
+
+  gpioinfo("setpintype is not supported. \n");
+
+  return 0;
+}
+
+/****************************************************************************
+ * Name: rzv2h_gpio_initialize
+ *
+ * Description:
+ *   Initialize GPIO drivers for use with /apps/examples/gpio
+ ****************************************************************************/
+
+int rzv2h_gpio_initialize(void)
+{
+  int   pincount = 0;
+  int   i;
+  int   ret = 0;
+
+#if BOARD_NGPIOIN > 0
+  for (i = 0; i < BOARD_NGPIOIN; i++, pincount++)
+    {
+      /* Setup and register the GPIO pin */
+
+      g_gpin[i].gpio.gp_pintype = GPIO_INPUT_PIN;
+      g_gpin[i].gpio.gp_ops     = &gpin_ops;
+      g_gpin[i].id              = i;
+      ret                       =
+        gpio_pin_register(&g_gpin[i].gpio, pincount);
+      if (ret < 0)
+        {
+          gpioerr("GPIOIN(%d): gpio_pin_register failed: %d", i, ret);
+          return ret;
+        }
+
+      /* Configure the pin that will be used as input */
+
+      ret = rzv2h_configgpio(g_gpioinputs[i]);
+      if (ret < 0)
+        {
+          gpioerr("GPIOIN(%d): rzv2h_configgpio failed: %d", i, ret);
+          return ret;
+        }
+    }
+#endif
+
+#if BOARD_NGPIOOUT > 0
+  for (i = 0; i < BOARD_NGPIOOUT; i++, pincount++)
+    {
+      /* Setup and register the GPIO pin */
+
+      g_gpout[i].gpio.gp_pintype    = GPIO_OUTPUT_PIN;
+      g_gpout[i].gpio.gp_ops        = &gpout_ops;
+      g_gpout[i].id                 = i;
+      ret                           = gpio_pin_register(&g_gpout[i].gpio,
+                                                        pincount);
+      if (ret < 0)
+        {
+          gpioerr("GPIOOUT(%d): gpio_pin_register failed: %d", i, ret);
+          return ret;
+        }
+
+      /* Configure the pin that will be used as output */
+
+      ret = rzv2h_configgpio(g_gpiooutputs[i]);
+      if (ret < 0)
+        {
+          gpioerr("GPIOOUT(%d): rzv2h_configgpio failed: %d", i, ret);
+          return ret;
+        }
+    }
+#endif
+
+  return ret;
+}
+
+#endif  /* CONFIG_RZV2H_GPIO */
diff --git a/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_userleds.c 
b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_userleds.c
new file mode 100644
index 00000000000..5d22359d602
--- /dev/null
+++ b/boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_userleds.c
@@ -0,0 +1,103 @@
+/****************************************************************************
+ * boards/arm/rzv2h/rzv2h-rdk/src/rzv2h_userleds.c
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.  The
+ * ASF licenses this file to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the
+ * License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <nuttx/debug.h>
+
+#include "chip.h"
+#include "rzv2h_gpio.h"
+#include "rzv2h-rdk.h"
+
+#include <arch/board/board.h>
+
+#ifndef CONFIG_ARCH_LEDS
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_userled_initialize
+ ****************************************************************************/
+
+uint32_t board_userled_initialize(void)
+{
+  /* Configure LED GPIOs for output */
+
+  rzv2h_configgpio(BOARD_P11_4_GPIO);
+  rzv2h_configgpio(BOARD_P11_5_GPIO);
+
+  /* The LEDs are active low.  Leave both LEDs off after initialization. */
+
+  rzv2h_gpiowrite(BOARD_P11_4_GPIO, true);
+  rzv2h_gpiowrite(BOARD_P11_5_GPIO, true);
+  return BOARD_NLEDS;
+}
+
+/****************************************************************************
+ * Name: board_userled
+ ****************************************************************************/
+
+void board_userled(int led, bool ledon)
+{
+  gpio_pinset_t ledcfg;
+
+  if (led == BOARD_LED_0)
+    {
+      ledcfg = BOARD_P11_4_GPIO;
+    }
+  else if (led == BOARD_LED_1)
+    {
+      ledcfg = BOARD_P11_5_GPIO;
+    }
+  else
+    {
+      return;
+    }
+
+  /* Low illuminates. */
+
+  rzv2h_gpiowrite(ledcfg, !ledon);
+}
+
+/****************************************************************************
+ * Name: board_userled_all
+ ****************************************************************************/
+
+void board_userled_all(uint32_t ledset)
+{
+  /* Low illuminates. */
+
+  rzv2h_gpiowrite(BOARD_P11_4_GPIO,
+                   (ledset & BOARD_LED_0_BIT) == 0);
+  rzv2h_gpiowrite(BOARD_P11_5_GPIO,
+                   (ledset & BOARD_LED_1_BIT) == 0);
+}
+
+#endif /* !CONFIG_ARCH_LEDS */

Reply via email to