hoahuubui opened a new pull request, #22114:
URL: https://github.com/apache/nuttx/pull/22114

   ## Summary
   
   Add CAN-FD support for the Renesas RZ/V2H (Cortex-R8, CPU0) for RZV2H-EVK 
and RZV2H-RDK.
   
   Channels 0-5 are available and each one is enabled with
   `CONFIG_RZV2H_CANFDn`. The application interface is chosen at build time:
   
   - Character device `/dev/can<n>` through the NuttX CAN upper half
     (`CONFIG_CAN`), or
   - SocketCAN network interface `can<n>` (`CONFIG_RZV2H_CANFD_SOCKET`,
     `CONFIG_NET_CAN`).
   
   Each channel has Kconfig options for the nominal and data bit rates, delay
   compensation, RX FIFOs, TX message buffers, channel error interrupts,
   interrupt-select (SEL) IRQ numbers and interrupt priority. Error reporting
   and internal/external loopback modes are supported.
   
   The series has three commits:
   
   1. `arch/arm/rzv2h`: CAN-FD driver (`rzv2h_canfd.c/.h`), Kconfig, Make.defs,
      CMake, CANFD pin definitions, the `RZV2H_GPIO_OUTPUT` helper for 
      transceiver standby pins, and the `R_CANFD_` prefix in `tools/nxstyle.c`.
   2. `boards/arm/rzv2h`: CANFD pin and transceiver standby definitions in
      `board.h`, CAN-FD registration in board bring-up, and five defconfigs per
      board: `can-loopback`, `can-socketcan`, `can-dronecan`,
      `can-opencyphal` and `can-slcan`.
   3. `Documentation/arm/rzv2h`: documentation for the driver and both boards.
   
   ## Impact
   
   - New feature, off by default. Nothing changes for existing RZ/V2H
     configurations unless `CONFIG_RZV2H_CANFD` is enabled.
   - Ten new board configurations (five per board), listed above.
   - Documentation: new CAN sections for the RZ/V2H platform page and both
     board pages.
   
   ## Testing
   
   Host: Linux Ubuntu 24.04, arm-none-eabi-gcc 13.2.1
   
   Build checks:
   - `rzv2h-rdk:can-loopback`, `rzv2h-rdk:can-socketcan`, 
`rzv2h-rdk:can-dronecan`,
      `rzv2h-rdk:can-opencyphal` and `rzv2h-rdk:can-slcan` build with the new
     driver (`rzv2h_canfd.c`) compiling without warnings.
   - `rzv2h-evk:can-loopback`, `rzv2h-evk:can-socketcan`, 
`rzv2h-evk:can-dronecan`,
      `rzv2h-evk:can-opencyphal` and `rzv2h-evk:can-slcan` build with the new
     driver (`rzv2h_canfd.c`) compiling without warnings.
   - `tools/checkpatch.sh` passes on all changed files, and the pre-commit
     hooks (nxstyle, cmake-format, codespell) pass.
   
   Runtime checks on hardware (loop-back mode):
   Board: RZ/V2H-RDK
   `./tools/configure.sh -l rzv2h-rdk:can-loopback && make`
   ```
   NuttShell (NSH) NuttX-13.1.1-RC0
   nsh> ls /dev
   /dev:
   can0
   console
   gpio0
   gpio1
   gpio2
   null
   ttyS0
   zero
   nsh> can -n 20
   nmsgs: 20
   min ID: 1 max ID: 536870911
   Bit timing:
      Baud: 500000
     TSEG1: 119
     TSEG2: 40
       SJW: 4
     ID:    1 DLC: 1
     ID:    1 DLC: 1
     ID:    1 DLC: 1 -- OK
     ID:    2 DLC: 2
     ID:    2 DLC: 2
     ID:    2 DLC: 2 -- OK
     ID:    3 DLC: 3
     ID:    3 DLC: 3
     ID:    3 DLC: 3 -- OK
     ID:    4 DLC: 4
     ID:    4 DLC: 4
     ID:    4 DLC: 4 -- OK
     ID:    5 DLC: 5
     ID:    5 DLC: 5
     ID:    5 DLC: 5 -- OK
     ID:    6 DLC: 6
     ID:    6 DLC: 6
     ID:    6 DLC: 6 -- OK
     ID:    7 DLC: 7
     ID:    7 DLC: 7
     ID:    7 DLC: 7 -- OK
     ID:    8 DLC: 8
     ID:    8 DLC: 8
     ID:    8 DLC: 8 -- OK
     ID:    9 DLC: 9
     ID:    9 DLC: 9
     ID:    9 DLC: 9 -- OK
     ID:   10 DLC: 10
     ID:   10 DLC: 10
     ID:   10 DLC: 10 -- OK
     ID:   11 DLC: 11
     ID:   11 DLC: 11
     ID:   11 DLC: 11 -- OK
     ID:   12 DLC: 12
     ID:   12 DLC: 12
     ID:   12 DLC: 12 -- OK
     ID:   13 DLC: 13
     ID:   13 DLC: 13
     ID:   13 DLC: 13 -- OK
     ID:   14 DLC: 14
     ID:   14 DLC: 14
     ID:   14 DLC: 14 -- OK
     ID:   15 DLC: 15
     ID:   15 DLC: 15
     ID:   15 DLC: 15 -- OK
     ID:   16 DLC: 1
     ID:   16 DLC: 1
     ID:   16 DLC: 1 -- OK
     ID:   17 DLC: 2
     ID:   17 DLC: 2
     ID:   17 DLC: 2 -- OK
     ID:   18 DLC: 3
     ID:   18 DLC: 3
     ID:   18 DLC: 3 -- OK
     ID:   19 DLC: 4
     ID:   19 DLC: 4
     ID:   19 DLC: 4 -- OK
     ID:   20 DLC: 5
     ID:   20 DLC: 5
     ID:   20 DLC: 5 -- OK
   Terminating!
   nsh>
   ```
   
   Board: RZ/V2H-EVK
   `./tools/configure.sh -l rzv2h-evk:can-loopback && make`
   ```
   NuttShell (NSH) NuttX-13.1.1-RC0
   nsh> ls /dev
   /dev:
   can0
   console
   gpio0
   gpio1
   gpio2
   null
   ttyS0
   zero
   nsh> can -n 20
   nmsgs: 20
   min ID: 1 max ID: 536870911
   Bit timing:
      Baud: 500000
     TSEG1: 119
     TSEG2: 40
       SJW: 4
     ID:    1 DLC: 1
     ID:    1 DLC: 1
     ID:    1 DLC: 1 -- OK
     ID:    2 DLC: 2
     ID:    2 DLC: 2
     ID:    2 DLC: 2 -- OK
     ID:    3 DLC: 3
     ID:    3 DLC: 3
     ID:    3 DLC: 3 -- OK
     ID:    4 DLC: 4
     ID:    4 DLC: 4
     ID:    4 DLC: 4 -- OK
     ID:    5 DLC: 5
     ID:    5 DLC: 5
     ID:    5 DLC: 5 -- OK
     ID:    6 DLC: 6
     ID:    6 DLC: 6
     ID:    6 DLC: 6 -- OK
     ID:    7 DLC: 7
     ID:    7 DLC: 7
     ID:    7 DLC: 7 -- OK
     ID:    8 DLC: 8
     ID:    8 DLC: 8
     ID:    8 DLC: 8 -- OK
     ID:    9 DLC: 9
     ID:    9 DLC: 9
     ID:    9 DLC: 9 -- OK
     ID:   10 DLC: 10
     ID:   10 DLC: 10
     ID:   10 DLC: 10 -- OK
     ID:   11 DLC: 11
     ID:   11 DLC: 11
     ID:   11 DLC: 11 -- OK
     ID:   12 DLC: 12
     ID:   12 DLC: 12
     ID:   12 DLC: 12 -- OK
     ID:   13 DLC: 13
     ID:   13 DLC: 13
     ID:   13 DLC: 13 -- OK
     ID:   14 DLC: 14
     ID:   14 DLC: 14
     ID:   14 DLC: 14 -- OK
     ID:   15 DLC: 15
     ID:   15 DLC: 15
     ID:   15 DLC: 15 -- OK
     ID:   16 DLC: 1
     ID:   16 DLC: 1
     ID:   16 DLC: 1 -- OK
     ID:   17 DLC: 2
     ID:   17 DLC: 2
     ID:   17 DLC: 2 -- OK
     ID:   18 DLC: 3
     ID:   18 DLC: 3
     ID:   18 DLC: 3 -- OK
     ID:   19 DLC: 4
     ID:   19 DLC: 4
     ID:   19 DLC: 4 -- OK
     ID:   20 DLC: 5
     ID:   20 DLC: 5
     ID:   20 DLC: 5 -- OK
   Terminating!
   nsh>
   ```


-- 
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.

To unsubscribe, e-mail: [email protected]

For queries about this service, please contact Infrastructure at:
[email protected]

  • [PR] arch/arm/rzv2h: Add CAN-... hoahuubui (via GitHub) via commits

Reply via email to