This is an automated email from the ASF dual-hosted git repository. xiaoxiang781216 pushed a commit to branch master in repository https://gitbox.apache.org/repos/asf/nuttx.git
commit 64c0d2d059bf05679718b315f8fb546e42572a61 Author: chenzihan1 <[email protected]> AuthorDate: Tue Dec 30 17:57:05 2025 +0800 drivers/goldfish/battery: start the battery work during driver initialization Add a work queue call in goldfish_battery_register() to trigger an initial battery state update immediately after driver initialization. Previously, the battery state was only updated when a interrupt occurred. This could cause the battery_state uORB topic to have no data available during early boot, leading to failures when applications tried to read battery information via orb_copy(). Signed-off-by: chenzihan1 <[email protected]> --- drivers/power/battery/goldfish_battery.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/power/battery/goldfish_battery.c b/drivers/power/battery/goldfish_battery.c index 0e13bd7b37b..7f67d1a4f13 100644 --- a/drivers/power/battery/goldfish_battery.c +++ b/drivers/power/battery/goldfish_battery.c @@ -320,6 +320,14 @@ int goldfish_battery_register(FAR void *regs, int irq) up_enable_irq(data->irq); GOLDFISH_BATTERY_WRITE(data, BATTERY_INT_ENABLE, BATTERY_INT_MASK); + /* Trigger initial battery state update */ + + ret = work_queue(HPWORK, &data->work, goldfish_battery_work, data, 0); + if (ret < 0) + { + batwarn("initial battery work queue failed: %d\n", ret); + } + batinfo("goldfish_battery_register over"); return 0; fail:
