This is an automated email from the ASF dual-hosted git repository.
btashton pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/incubator-nuttx.git
commit 7f9d8f56fbca60e66242a96a6f73baae6f22d1af
Author: Michal Lenc <lencm...@fel.cvut.cz>
AuthorDate: Wed Dec 2 23:59:52 2020 +0100
boards/Kconfig: Added configuration for Teensy-4 BSP
Signed-off-by: Michal Lenc <lencm...@fel.cvut.cz>
---
boards/Kconfig | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/boards/Kconfig b/boards/Kconfig
index 457f4dd..464f815 100644
--- a/boards/Kconfig
+++ b/boards/Kconfig
@@ -1878,6 +1878,16 @@ config ARCH_BOARD_TEENSY_3X
Teensy-3.0). the primary difference is that the Teensy 3.0 has
a
MK20DX128VLH5 with slightly less capability.
+config ARCH_BOARD_TEENSY_4X
+ bool "PJRC Teensy++ 4.x board"
+ depends on ARCH_CHIP_MIMXRT1062DVL6A
+ select ARCH_HAVE_LEDS
+ ---help---
+ This is the port of NuttX to the PJRC Teensy++ 4.x board. This
board is
+ developed by http://pjrc.com/teensy/. The Teensy++ 4.x is based
+ on an NXP MIMXRT1062DVL6A MCU. The port can support both Teensy
4.0 and
+ Teensy 4.1 boards.
+
config ARCH_BOARD_TEENSY_LC
bool "Teensy LC"
depends on ARCH_CHIP_MKL25Z64
@@ -2331,6 +2341,7 @@ config ARCH_BOARD
default "sure-pic32mx" if ARCH_BOARD_SUREPIC32MX
default "teensy-2.0" if ARCH_BOARD_TEENSY_20
default "teensy-3.x" if ARCH_BOARD_TEENSY_3X
+ default "teensy-4.x" if ARCH_BOARD_TEENSY_4X
default "teensy-lc" if ARCH_BOARD_TEENSY_LC
default "tm4c123g-launchpad" if ARCH_BOARD_TM4C123G_LAUNCHPAD
default "tm4c1294-launchpad" if ARCH_BOARD_TM4C1294_LAUNCHPAD
@@ -2443,6 +2454,9 @@ endif
if ARCH_BOARD_IMXRT1060_EVK
source "boards/arm/imxrt/imxrt1060-evk/Kconfig"
endif
+if ARCH_BOARD_TEENSY_4X
+source "boards/arm/imxrt/teensy-4.x/Kconfig"
+endif
if ARCH_BOARD_FREEDOM_K28F
source "boards/arm/kinetis/freedom-k28f/Kconfig"
endif
