This is an automated email from the ASF dual-hosted git repository.
acassis pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/incubator-nuttx.git
The following commit(s) were added to refs/heads/master by this push:
new c96c96a drivers: Merge the common driver initialization into one place
c96c96a is described below
commit c96c96a3994af517152ca99119339a46f632a685
Author: Xiang Xiao <[email protected]>
AuthorDate: Fri Mar 11 22:52:32 2022 +0800
drivers: Merge the common driver initialization into one place
Signed-off-by: Xiang Xiao <[email protected]>
---
arch/arm/src/common/arm_initialize.c | 101 +----------------
arch/arm/src/common/arm_internal.h | 12 --
arch/arm/src/eoss3/eoss3_serial.c | 1 -
arch/arm/src/imx6/imx_enet.c | 2 +-
arch/arm/src/imx6/imx_enet.h | 22 ----
arch/arm/src/imxrt/imxrt_lpspi.c | 1 -
arch/arm/src/nrf52/nrf52_pminitialize.c | 6 +-
arch/arm/src/s32k1xx/s32k1xx_pminitialize.c | 5 -
arch/arm/src/stm32/stm32_pminitialize.c | 5 -
arch/arm/src/stm32f7/stm32_pminitialize.c | 5 -
arch/arm/src/stm32h7/stm32_pminitialize.c | 5 -
arch/arm/src/stm32l4/stm32l4_pminitialize.c | 5 -
arch/avr/src/common/up_initialize.c | 92 +---------------
arch/avr/src/common/up_internal.h | 4 -
arch/ceva/src/common/up_idle.c | 3 -
arch/ceva/src/common/up_initialize.c | 99 -----------------
arch/ceva/src/common/up_internal.h | 24 ----
arch/hc/src/common/up_initialize.c | 92 +---------------
arch/hc/src/common/up_internal.h | 6 -
arch/mips/src/common/mips_initialize.c | 91 ---------------
arch/mips/src/common/mips_internal.h | 4 -
arch/misoc/src/lm32/lm32.h | 18 ---
arch/misoc/src/lm32/lm32_allocateheap.c | 16 ---
arch/misoc/src/lm32/lm32_initialize.c | 21 ----
arch/misoc/src/minerva/minerva.h | 18 ---
arch/misoc/src/minerva/minerva_allocateheap.c | 16 ---
arch/misoc/src/minerva/minerva_initialize.c | 21 ----
arch/or1k/src/common/up_initialize.c | 92 ----------------
arch/or1k/src/common/up_internal.h | 8 --
arch/renesas/src/common/up_initialize.c | 96 +---------------
arch/renesas/src/common/up_internal.h | 8 --
arch/risc-v/src/common/riscv_initialize.c | 63 -----------
arch/risc-v/src/common/riscv_internal.h | 4 -
arch/risc-v/src/esp32c3/esp32c3_irq.h | 6 -
arch/risc-v/src/esp32c3/esp32c3_pminitialize.c | 4 -
arch/risc-v/src/rv32m1/rv32m1_serial.c | 1 -
arch/sim/src/sim/up_initialize.c | 112 +------------------
arch/sim/src/sim/up_internal.h | 6 -
arch/sparc/src/common/up_initialize.c | 122 +--------------------
arch/sparc/src/common/up_internal.h | 11 --
arch/x86/src/common/up_initialize.c | 91 ---------------
arch/x86/src/common/up_internal.h | 8 --
arch/x86_64/src/common/up_initialize.c | 94 ----------------
arch/x86_64/src/common/up_internal.h | 5 -
arch/xtensa/src/common/xtensa.h | 2 -
arch/xtensa/src/common/xtensa_initialize.c | 96 ----------------
arch/xtensa/src/esp32/esp32_pminitialize.c | 6 +-
arch/z16/src/common/z16_initialize.c | 91 ---------------
arch/z16/src/common/z16_internal.h | 4 -
arch/z80/src/common/z80_initialize.c | 88 ---------------
arch/z80/src/common/z80_internal.h | 6 -
.../lpc4088-devkit/src/lpc17_40_userleds.c | 2 +-
.../lpc4088-quickstart/src/lpc17_40_userleds.c | 2 +-
.../lpc17xx_40xx/lx_cpu/src/lpc17_40_userleds.c | 2 +-
.../arm/lpc17xx_40xx/mbed/src/lpc17_40_userleds.c | 1 -
.../lpc17xx_40xx/open1788/src/lpc17_40_userleds.c | 2 +-
boards/arm/stm32/axoloti/src/stm32_userleds.c | 1 -
boards/arm/stm32/mikroe-stm32f4/src/stm32_pm.c | 6 -
.../stm32/olimex-stm32-e407/src/stm32_userleds.c | 3 +-
.../stm32/olimex-stm32-h407/src/stm32_userleds.c | 3 +-
boards/arm/stm32/omnibusf4/src/stm32_pm.c | 7 --
boards/arm/stm32/stm3210e-eval/src/stm32_pm.c | 6 -
boards/arm/stm32/stm32f4discovery/src/stm32_pm.c | 7 --
boards/arm/stm32/stm32vldiscovery/src/stm32_leds.c | 1 -
drivers/Makefile | 2 +
.../drivers_initialize.c | 74 ++++---------
drivers/efuse/efuse.c | 1 -
include/nuttx/drivers/drivers.h | 20 ++++
sched/init/nx_start.c | 15 +--
69 files changed, 69 insertions(+), 1805 deletions(-)
diff --git a/arch/arm/src/common/arm_initialize.c
b/arch/arm/src/common/arm_initialize.c
index 75be389..cf34c5c 100644
--- a/arch/arm/src/common/arm_initialize.c
+++ b/arch/arm/src/common/arm_initialize.c
@@ -22,23 +22,8 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
#include <nuttx/board.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/note/note_driver.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
-
#include <arch/board/board.h>
#include "arm_arch.h"
@@ -49,7 +34,7 @@
****************************************************************************/
/****************************************************************************
- * Name: up_color_intstack
+ * Name: arm_color_intstack
*
* Description:
* Set the interrupt stack to a value so that later we can determine how
@@ -58,7 +43,7 @@
****************************************************************************/
#if defined(CONFIG_STACK_COLORATION) && CONFIG_ARCH_INTERRUPTSTACK > 3
-static inline void up_color_intstack(void)
+static inline void arm_color_intstack(void)
{
#ifdef CONFIG_SMP
uint32_t *ptr = (uint32_t *)arm_intstack_alloc();
@@ -75,7 +60,7 @@ static inline void up_color_intstack(void)
}
}
#else
-# define up_color_intstack()
+# define arm_color_intstack()
#endif
/****************************************************************************
@@ -101,13 +86,9 @@ static inline void up_color_intstack(void)
void up_initialize(void)
{
- /* Initialize global variables */
-
- CURRENT_REGS = NULL;
-
/* Colorize the interrupt stack */
- up_color_intstack();
+ arm_color_intstack();
/* Add any extra memory fragments to the memory manager */
@@ -136,92 +117,18 @@ void up_initialize(void)
}
#endif
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DEV_LOOP)
- loop_register(); /* Standard /dev/loop */
-#endif
-
-#if defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
arm_serialinit();
#endif
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver).
- */
-
-#if defined (CONFIG_LWL_CONSOLE)
- lwlconsole_init();
-#elif defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- ptmx_register();
-#endif
-
-#if defined(CONFIG_CRYPTO)
- /* Initialize the HW crypto and /dev/crypto */
-
- up_cryptoinitialize();
-#endif
-
-#ifdef CONFIG_CRYPTO_CRYPTODEV
- devcrypto_register();
-#endif
-
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
arm_netinitialize();
#endif
-#ifdef CONFIG_NET_LOOPBACK
- /* Initialize the local loopback device */
-
- localhost_initialize();
-#endif
-
-#ifdef CONFIG_NET_TUN
- /* Initialize the TUN device */
-
- tun_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- telnet_initialize();
-#endif
-
#if defined(CONFIG_USBDEV) || defined(CONFIG_USBHOST)
/* Initialize USB -- device and/or host */
diff --git a/arch/arm/src/common/arm_internal.h
b/arch/arm/src/common/arm_internal.h
index 52a576e..6066daa 100644
--- a/arch/arm/src/common/arm_internal.h
+++ b/arch/arm/src/common/arm_internal.h
@@ -445,14 +445,6 @@ void arm_serialinit(void);
void arm_earlyserialinit(void);
#endif
-#ifdef CONFIG_RPMSG_UART
-void rpmsg_serialinit(void);
-#endif
-
-#ifdef CONFIG_LWL_CONSOLE
-void lwlconsole_init(void);
-#endif
-
/* DMA **********************************************************************/
#ifdef CONFIG_ARCH_DMA
@@ -475,10 +467,6 @@ void arm_addregion(void);
# define arm_addregion()
#endif
-/* Watchdog timer ***********************************************************/
-
-void arm_wdtinit(void);
-
/* Networking ***************************************************************/
/* Defined in board/xyz_network.c for board-specific Ethernet
diff --git a/arch/arm/src/eoss3/eoss3_serial.c
b/arch/arm/src/eoss3/eoss3_serial.c
index 737cd3e..2387a28 100644
--- a/arch/arm/src/eoss3/eoss3_serial.c
+++ b/arch/arm/src/eoss3/eoss3_serial.c
@@ -38,7 +38,6 @@
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <nuttx/init.h>
-#include <nuttx/power/pm.h>
#include <nuttx/fs/ioctl.h>
#include <nuttx/serial/serial.h>
#include <nuttx/wqueue.h>
diff --git a/arch/arm/src/imx6/imx_enet.c b/arch/arm/src/imx6/imx_enet.c
index c75941f..204d649 100644
--- a/arch/arm/src/imx6/imx_enet.c
+++ b/arch/arm/src/imx6/imx_enet.c
@@ -2668,7 +2668,7 @@ int imx_netinitialize(int intf)
}
/****************************************************************************
- * Name: up_netinitialize
+ * Name: arm_netinitialize
*
* Description:
* Initialize the first network interface. If there are more than one
diff --git a/arch/arm/src/imx6/imx_enet.h b/arch/arm/src/imx6/imx_enet.h
index 68d1f2f..90a9b9f 100644
--- a/arch/arm/src/imx6/imx_enet.h
+++ b/arch/arm/src/imx6/imx_enet.h
@@ -55,28 +55,6 @@ extern "C"
#endif
/****************************************************************************
- * Function: up_netinitialize
- *
- * Description:
- * Initialize the first network interface. If there are more than one
- * interface in the chip, then board-specific logic will have to provide
- * this function to determine which, if any, Ethernet controllers should
- * be initialized. Also prototyped in up_internal.h.
- *
- * Input Parameters:
- * None
- *
- * Returned Value:
- * OK on success; Negated errno on failure.
- *
- * Assumptions:
- * Called very early in the initialization sequence.
- *
- ****************************************************************************/
-
-void up_netinitialize(void);
-
-/****************************************************************************
* Function: imx_phy_boardinitialize
*
* Description:
diff --git a/arch/arm/src/imxrt/imxrt_lpspi.c b/arch/arm/src/imxrt/imxrt_lpspi.c
index 6275109..c8c3eff 100644
--- a/arch/arm/src/imxrt/imxrt_lpspi.c
+++ b/arch/arm/src/imxrt/imxrt_lpspi.c
@@ -61,7 +61,6 @@
#include <nuttx/arch.h>
#include <nuttx/semaphore.h>
#include <nuttx/spi/spi.h>
-#include <nuttx/power/pm.h>
#include <arch/board/board.h>
diff --git a/arch/arm/src/nrf52/nrf52_pminitialize.c
b/arch/arm/src/nrf52/nrf52_pminitialize.c
index edd3c22..08246d0 100644
--- a/arch/arm/src/nrf52/nrf52_pminitialize.c
+++ b/arch/arm/src/nrf52/nrf52_pminitialize.c
@@ -23,7 +23,8 @@
****************************************************************************/
#include <nuttx/config.h>
-#include <nuttx/power/pm.h>
+
+#include "arm_internal.h"
/****************************************************************************
* Public Functions
@@ -49,7 +50,4 @@
void arm_pminitialize(void)
{
- /* Then initialize the NuttX power management subsystem proper */
-
- pm_initialize();
}
diff --git a/arch/arm/src/s32k1xx/s32k1xx_pminitialize.c
b/arch/arm/src/s32k1xx/s32k1xx_pminitialize.c
index 096d6bb..173bb52 100644
--- a/arch/arm/src/s32k1xx/s32k1xx_pminitialize.c
+++ b/arch/arm/src/s32k1xx/s32k1xx_pminitialize.c
@@ -24,8 +24,6 @@
#include <nuttx/config.h>
-#include <nuttx/power/pm.h>
-
#include "arm_internal.h"
#ifdef CONFIG_PM
@@ -54,9 +52,6 @@
void arm_pminitialize(void)
{
- /* Then initialize the NuttX power management subsystem proper */
-
- pm_initialize();
}
#endif /* CONFIG_PM */
diff --git a/arch/arm/src/stm32/stm32_pminitialize.c
b/arch/arm/src/stm32/stm32_pminitialize.c
index 1dcd6f4..2e46ab7 100644
--- a/arch/arm/src/stm32/stm32_pminitialize.c
+++ b/arch/arm/src/stm32/stm32_pminitialize.c
@@ -24,8 +24,6 @@
#include <nuttx/config.h>
-#include <nuttx/power/pm.h>
-
#include "arm_internal.h"
#include "stm32_pm.h"
@@ -55,9 +53,6 @@
void arm_pminitialize(void)
{
- /* Then initialize the NuttX power management subsystem proper */
-
- pm_initialize();
}
#endif /* CONFIG_PM */
diff --git a/arch/arm/src/stm32f7/stm32_pminitialize.c
b/arch/arm/src/stm32f7/stm32_pminitialize.c
index 05af5bd..90d44f1 100644
--- a/arch/arm/src/stm32f7/stm32_pminitialize.c
+++ b/arch/arm/src/stm32f7/stm32_pminitialize.c
@@ -24,8 +24,6 @@
#include <nuttx/config.h>
-#include <nuttx/power/pm.h>
-
#include "arm_internal.h"
#include "stm32_pm.h"
@@ -55,9 +53,6 @@
void arm_pminitialize(void)
{
- /* Then initialize the NuttX power management subsystem proper */
-
- pm_initialize();
}
#endif /* CONFIG_PM */
diff --git a/arch/arm/src/stm32h7/stm32_pminitialize.c
b/arch/arm/src/stm32h7/stm32_pminitialize.c
index baae5fb..b0a8b11 100644
--- a/arch/arm/src/stm32h7/stm32_pminitialize.c
+++ b/arch/arm/src/stm32h7/stm32_pminitialize.c
@@ -24,8 +24,6 @@
#include <nuttx/config.h>
-#include <nuttx/power/pm.h>
-
#include "arm_internal.h"
#include "stm32_pm.h"
@@ -55,9 +53,6 @@
void arm_pminitialize(void)
{
- /* Then initialize the NuttX power management subsystem proper */
-
- pm_initialize();
}
#endif /* CONFIG_PM */
diff --git a/arch/arm/src/stm32l4/stm32l4_pminitialize.c
b/arch/arm/src/stm32l4/stm32l4_pminitialize.c
index 034a0c8..77d78f7 100644
--- a/arch/arm/src/stm32l4/stm32l4_pminitialize.c
+++ b/arch/arm/src/stm32l4/stm32l4_pminitialize.c
@@ -24,8 +24,6 @@
#include <nuttx/config.h>
-#include <nuttx/power/pm.h>
-
#include "arm_internal.h"
#include "stm32l4_pm.h"
@@ -55,9 +53,6 @@
void arm_pminitialize(void)
{
- /* Then initialize the NuttX power management subsystem proper */
-
- pm_initialize();
}
#endif /* CONFIG_PM */
diff --git a/arch/avr/src/common/up_initialize.c
b/arch/avr/src/common/up_initialize.c
index 05a913b..dbbf85c 100644
--- a/arch/avr/src/common/up_initialize.c
+++ b/arch/avr/src/common/up_initialize.c
@@ -22,22 +22,8 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/note/note_driver.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
-
+#include <nuttx/board.h>
#include <arch/board/board.h>
#include "up_arch.h"
@@ -129,10 +115,6 @@ static inline void up_color_intstack(void)
void up_initialize(void)
{
- /* Initialize global variables */
-
- g_current_regs = NULL;
-
/* Colorize the interrupt stack */
up_color_intstack();
@@ -164,90 +146,18 @@ void up_initialize(void)
}
#endif
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DEV_LOOP)
- loop_register(); /* Standard /dev/loop */
-#endif
-
-#if defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver).
- */
-
-#if defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- ptmx_register();
-#endif
-
-#if defined(CONFIG_CRYPTO)
- /* Initialize the HW crypto and /dev/crypto */
-
- up_cryptoinitialize();
-#endif
-
-#ifdef CONFIG_CRYPTO_CRYPTODEV
- devcrypto_register();
-#endif
-
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
-#ifdef CONFIG_NET_LOOPBACK
- /* Initialize the local loopback device */
-
- localhost_initialize();
-#endif
-
-#ifdef CONFIG_NET_TUN
- /* Initialize the TUN device */
-
- tun_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- telnet_initialize();
-#endif
-
/* Initialize USB */
up_usbinitialize();
diff --git a/arch/avr/src/common/up_internal.h
b/arch/avr/src/common/up_internal.h
index 593c1fc..6918f90 100644
--- a/arch/avr/src/common/up_internal.h
+++ b/arch/avr/src/common/up_internal.h
@@ -140,10 +140,6 @@ void up_earlyserialinit(void);
void up_serialinit(void);
#endif
-#ifdef CONFIG_RPMSG_UART
-void rpmsg_serialinit(void);
-#endif
-
/* Defined in chip/xxx_ethernet.c */
#if defined(CONFIG_NET) && !defined(CONFIG_NETDEV_LATEINIT)
diff --git a/arch/ceva/src/common/up_idle.c b/arch/ceva/src/common/up_idle.c
index da86dfc..21f65e1 100644
--- a/arch/ceva/src/common/up_idle.c
+++ b/arch/ceva/src/common/up_idle.c
@@ -163,8 +163,5 @@ void weak_function up_cpu_normal(void)
#ifdef CONFIG_PM
void up_pminitialize(void)
{
- /* Then initialize the power management subsystem proper */
-
- pm_initialize();
}
#endif
diff --git a/arch/ceva/src/common/up_initialize.c
b/arch/ceva/src/common/up_initialize.c
index c2476b0..2974a43 100644
--- a/arch/ceva/src/common/up_initialize.c
+++ b/arch/ceva/src/common/up_initialize.c
@@ -22,30 +22,10 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
-#include <nuttx/sched_note.h>
-#include <nuttx/mm/iob.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/syslog/ramlog.h>
-#include <nuttx/syslog/syslog.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
-
-#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
-#include "chip.h"
/****************************************************************************
* Private Functions
@@ -96,10 +76,6 @@ static inline void up_color_intstack(void)
void up_initialize(void)
{
- /* Initialize global variables */
-
- CURRENT_REGS = NULL;
-
/* Colorize the interrupt stack */
up_color_intstack();
@@ -126,93 +102,18 @@ void up_initialize(void)
up_dma_initialize();
#endif
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DEV_LOOP)
- loop_register(); /* Standard /dev/loop */
-#endif
-
-#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
- defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver).
- */
-
-#if defined (CONFIG_ARM_LWL_CONSOLE)
- lwlconsole_init();
-#elif defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- ptmx_register();
-#endif
-
-#if defined(CONFIG_CRYPTO)
- /* Initialize the HW crypto and /dev/crypto */
-
- up_cryptoinitialize();
-#endif
-
-#ifdef CONFIG_CRYPTO_CRYPTODEV
- devcrypto_register();
-#endif
-
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
-#ifdef CONFIG_NET_LOOPBACK
- /* Initialize the local loopback device */
-
- localhost_initialize();
-#endif
-
-#ifdef CONFIG_NET_TUN
- /* Initialize the TUN device */
-
- tun_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- telnet_initialize();
-#endif
-
#if defined(CONFIG_USBDEV) || defined(CONFIG_USBHOST)
/* Initialize USB -- device and/or host */
diff --git a/arch/ceva/src/common/up_internal.h
b/arch/ceva/src/common/up_internal.h
index 3f73246..2ded122 100644
--- a/arch/ceva/src/common/up_internal.h
+++ b/arch/ceva/src/common/up_internal.h
@@ -248,8 +248,6 @@ void up_cpu_normal(void);
/* Interrupt handling *******************************************************/
-void up_irqinitialize(void);
-
/* Interrupt acknowledge and dispatch */
uint32_t *up_doirq(int irq, uint32_t *regs);
@@ -261,10 +259,6 @@ int up_hardfault(int irq, FAR void *context, FAR void
*arg);
void up_svcall_handler(void);
-/* System timer *************************************************************/
-
-void up_timer_initialize(void);
-
/* Low level serial output **************************************************/
#ifdef USE_SERIALDRIVER
@@ -279,20 +273,6 @@ void up_earlyserialinit(void);
# define up_earlyserialinit()
#endif
-#ifdef CONFIG_RPMSG_UART
-void rpmsg_serialinit(void);
-#else
-# define rpmsg_serialinit()
-#endif
-
-/* Defined in drivers/lowconsole.c */
-
-#ifdef CONFIG_DEV_LOWCONSOLE
-void lowconsole_init(void);
-#else
-# define lowconsole_init()
-#endif
-
/* DMA **********************************************************************/
#ifdef CONFIG_ARCH_DMA
@@ -307,10 +287,6 @@ void up_addregion(void);
# define up_addregion()
#endif
-/* Watchdog timer ***********************************************************/
-
-void up_wdtinit(void);
-
/* Networking ***************************************************************/
#if defined(CONFIG_NET) && !defined(CONFIG_NETDEV_LATEINIT)
diff --git a/arch/hc/src/common/up_initialize.c
b/arch/hc/src/common/up_initialize.c
index 133a0ea..28b9399 100644
--- a/arch/hc/src/common/up_initialize.c
+++ b/arch/hc/src/common/up_initialize.c
@@ -22,22 +22,9 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
#include <nuttx/board.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/note/note_driver.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
+#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
@@ -65,10 +52,6 @@
void up_initialize(void)
{
- /* Initialize global variables */
-
- g_current_regs = NULL;
-
/* Add any extra memory fragments to the memory manager */
up_addregion();
@@ -96,93 +79,20 @@ void up_initialize(void)
}
#endif
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DEV_LOOP)
- loop_register(); /* Standard /dev/loop */
-#endif
-
-#if defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver).
- */
-
-#if defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- ptmx_register();
-#endif
-
-#if defined(CONFIG_CRYPTO)
- /* Initialize the HW crypto and /dev/crypto */
-
- up_cryptoinitialize();
-#endif
-
-#ifdef CONFIG_CRYPTO_CRYPTODEV
- devcrypto_register();
-#endif
-
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
-#ifdef CONFIG_NET_LOOPBACK
- /* Initialize the local loopback device */
-
- localhost_initialize();
-#endif
-
-#ifdef CONFIG_NET_TUN
- /* Initialize the TUN device */
-
- tun_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- telnet_initialize();
-#endif
-
/* Initialize USB */
up_usbinitialize();
-
board_autoled_on(LED_IRQSENABLED);
}
diff --git a/arch/hc/src/common/up_internal.h b/arch/hc/src/common/up_internal.h
index 5f59ea1..72fa526 100644
--- a/arch/hc/src/common/up_internal.h
+++ b/arch/hc/src/common/up_internal.h
@@ -157,10 +157,6 @@ void up_earlyserialinit(void);
void up_serialinit(void);
#endif
-#ifdef CONFIG_RPMSG_UART
-void rpmsg_serialinit(void);
-#endif
-
void up_lowputc(char ch);
void up_lowputs(const char *str);
@@ -178,8 +174,6 @@ void up_addregion(void);
void weak_function up_dma_initialize(void);
#endif
-void up_wdtinit(void);
-
#if defined(CONFIG_NET) && !defined(CONFIG_NETDEV_LATEINIT)
void up_netinitialize(void);
#else
diff --git a/arch/mips/src/common/mips_initialize.c
b/arch/mips/src/common/mips_initialize.c
index c433c5a..8c8ee2d 100644
--- a/arch/mips/src/common/mips_initialize.c
+++ b/arch/mips/src/common/mips_initialize.c
@@ -22,23 +22,8 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
#include <nuttx/board.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/note/note_driver.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
-
#include <arch/board/board.h>
#include "mips_arch.h"
@@ -67,10 +52,6 @@
void up_initialize(void)
{
- /* Initialize global variables */
-
- CURRENT_REGS = NULL;
-
/* Add any extra memory fragments to the memory manager */
up_addregion();
@@ -98,90 +79,18 @@ void up_initialize(void)
}
#endif
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DEV_LOOP)
- loop_register(); /* Standard /dev/loop */
-#endif
-
-#if defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver).
- */
-
-#if defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- ptmx_register();
-#endif
-
-#if defined(CONFIG_CRYPTO)
- /* Initialize the HW crypto and /dev/crypto */
-
- up_cryptoinitialize();
-#endif
-
-#ifdef CONFIG_CRYPTO_CRYPTODEV
- devcrypto_register();
-#endif
-
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
-#ifdef CONFIG_NET_LOOPBACK
- /* Initialize the local loopback device */
-
- localhost_initialize();
-#endif
-
-#ifdef CONFIG_NET_TUN
- /* Initialize the TUN device */
-
- tun_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- telnet_initialize();
-#endif
-
/* Initialize USB -- device and/or host */
up_usbinitialize();
diff --git a/arch/mips/src/common/mips_internal.h
b/arch/mips/src/common/mips_internal.h
index 1abdb59..297ad62 100644
--- a/arch/mips/src/common/mips_internal.h
+++ b/arch/mips/src/common/mips_internal.h
@@ -244,10 +244,6 @@ void up_earlyserialinit(void);
void up_serialinit(void);
#endif
-#ifdef CONFIG_RPMSG_UART
-void rpmsg_serialinit(void);
-#endif
-
/* Network */
#if defined(CONFIG_NET) && !defined(CONFIG_NETDEV_LATEINIT)
diff --git a/arch/misoc/src/lm32/lm32.h b/arch/misoc/src/lm32/lm32.h
index 77a0e67..e21b651 100644
--- a/arch/misoc/src/lm32/lm32.h
+++ b/arch/misoc/src/lm32/lm32.h
@@ -104,12 +104,6 @@ extern uint32_t g_idle_topstack;
void lm32_board_initialize(void);
-/* Memory allocation ********************************************************/
-
-#if CONFIG_MM_REGIONS > 1
-void lm32_add_region(void);
-#endif
-
/* Context switching ********************************************************/
void lm32_copystate(uint32_t *dest, uint32_t *src);
@@ -123,18 +117,6 @@ uint32_t *lm32_doirq(int irq, uint32_t *regs);
int lm32_swint(int irq, FAR void *context, FAR void *arg);
-/* Rpmsg serial *************************************************************/
-
-#ifdef CONFIG_RPMSG_UART
-void rpmsg_serialinit(void);
-#else
-# define rpmsg_serialinit()
-#endif
-
-/* System timer *************************************************************/
-
-void lm32_timer_initialize(void);
-
/* Signal handling **********************************************************/
void lm32_sigdeliver(void);
diff --git a/arch/misoc/src/lm32/lm32_allocateheap.c
b/arch/misoc/src/lm32/lm32_allocateheap.c
index 429751d..84b4e04 100644
--- a/arch/misoc/src/lm32/lm32_allocateheap.c
+++ b/arch/misoc/src/lm32/lm32_allocateheap.c
@@ -70,19 +70,3 @@ void up_allocate_heap(FAR void **heap_start, size_t
*heap_size)
*heap_start = (FAR void *)g_idle_topstack;
*heap_size = CONFIG_RAM_END - g_idle_topstack;
}
-
-/****************************************************************************
- * Name: lm32_add_region
- *
- * Description:
- * Memory may be added in non-contiguous chunks. Additional chunks are
- * added by calling this function.
- *
- ****************************************************************************/
-
-#if CONFIG_MM_REGIONS > 1
-void lm32_add_region(void)
-{
-#warning Missing logic
-}
-#endif
diff --git a/arch/misoc/src/lm32/lm32_initialize.c
b/arch/misoc/src/lm32/lm32_initialize.c
index 98c73b3..58ed160 100644
--- a/arch/misoc/src/lm32/lm32_initialize.c
+++ b/arch/misoc/src/lm32/lm32_initialize.c
@@ -22,26 +22,9 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
-#include <nuttx/sched_note.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/syslog/syslog.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
-
-#include <arch/board/board.h>
#include "misoc.h"
-#include "lm32.h"
/****************************************************************************
* Public Functions
@@ -53,10 +36,6 @@ void up_initialize(void)
misoc_serial_initialize();
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
#if 0 /* REVISIT */
/* Initialize the network cores */
diff --git a/arch/misoc/src/minerva/minerva.h b/arch/misoc/src/minerva/minerva.h
index b1abe95..ad17d2d 100644
--- a/arch/misoc/src/minerva/minerva.h
+++ b/arch/misoc/src/minerva/minerva.h
@@ -104,12 +104,6 @@ extern uint32_t g_idle_topstack;
void minerva_board_initialize(void);
-/* Memory allocation ********************************************************/
-
-#if CONFIG_MM_REGIONS > 1
-void minerva_add_region(void);
-#endif
-
/* Context switching ********************************************************/
void minerva_copystate(uint32_t * dest, uint32_t * src);
@@ -123,18 +117,6 @@ uint32_t *minerva_doirq(int irq, uint32_t * regs);
int minerva_swint(int irq, FAR void *context, FAR void *arg);
-/* Rpmsg serial *************************************************************/
-
-#ifdef CONFIG_RPMSG_UART
-void rpmsg_serialinit(void);
-#else
-# define rpmsg_serialinit()
-#endif
-
-/* System timer *************************************************************/
-
-void minerva_timer_initialize(void);
-
/* Signal handling **********************************************************/
void minerva_sigdeliver(void);
diff --git a/arch/misoc/src/minerva/minerva_allocateheap.c
b/arch/misoc/src/minerva/minerva_allocateheap.c
index 315c5d9..b330403 100644
--- a/arch/misoc/src/minerva/minerva_allocateheap.c
+++ b/arch/misoc/src/minerva/minerva_allocateheap.c
@@ -58,19 +58,3 @@ void up_allocate_heap(FAR void **heap_start, size_t *
heap_size)
*heap_start = (FAR void *)g_idle_topstack;
*heap_size = CONFIG_RAM_END - g_idle_topstack;
}
-
-/****************************************************************************
- * Name: minerva_add_region
- *
- * Description:
- * Memory may be added in non-contiguous chunks. Additional chunks are
- * added by calling this function.
- *
- ****************************************************************************/
-
-#if CONFIG_MM_REGIONS > 1
-void minerva_add_region(void)
-{
-# warning Missing logic
-}
-#endif
diff --git a/arch/misoc/src/minerva/minerva_initialize.c
b/arch/misoc/src/minerva/minerva_initialize.c
index 11d3d8f..0dde267 100644
--- a/arch/misoc/src/minerva/minerva_initialize.c
+++ b/arch/misoc/src/minerva/minerva_initialize.c
@@ -22,26 +22,9 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
-#include <nuttx/sched_note.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/syslog/syslog.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
-
-#include <arch/board/board.h>
#include "misoc.h"
-#include "minerva.h"
/****************************************************************************
* Public Functions
@@ -53,10 +36,6 @@ void up_initialize(void)
misoc_serial_initialize();
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
/* Initialize the network cores */
#ifdef CONFIG_MISOC_ETHERNET
diff --git a/arch/or1k/src/common/up_initialize.c
b/arch/or1k/src/common/up_initialize.c
index e290306..bef341c 100644
--- a/arch/or1k/src/common/up_initialize.c
+++ b/arch/or1k/src/common/up_initialize.c
@@ -22,28 +22,12 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
#include <nuttx/board.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/note/note_driver.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
#include <arch/board/board.h>
-
#include <arch/spr.h>
-#include "up_arch.h"
#include "up_internal.h"
/****************************************************************************
@@ -157,10 +141,6 @@ static inline void up_color_intstack(void)
void up_initialize(void)
{
- /* Initialize global variables */
-
- CURRENT_REGS = NULL;
-
/* Colorize the interrupt stack */
up_color_intstack();
@@ -192,92 +172,20 @@ void up_initialize(void)
}
#endif
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DEV_LOOP)
- loop_register(); /* Standard /dev/loop */
-#endif
-
-#if defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
/* Initialize the serial device driver */
up_serialinit();
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver).
- */
-
-#if defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- ptmx_register();
-#endif
-
/* Print OpenRISC CPU information */
or1k_print_cpuinfo();
-#if defined(CONFIG_CRYPTO)
- /* Initialize the HW crypto and /dev/crypto */
-
- up_cryptoinitialize();
-#endif
-
-#ifdef CONFIG_CRYPTO_CRYPTODEV
- devcrypto_register();
-#endif
-
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
-#ifdef CONFIG_NET_LOOPBACK
- /* Initialize the local loopback device */
-
- localhost_initialize();
-#endif
-
-#ifdef CONFIG_NET_TUN
- /* Initialize the TUN device */
-
- tun_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- telnet_initialize();
-#endif
-
/* Initialize USB -- device and/or host */
up_usbinitialize();
diff --git a/arch/or1k/src/common/up_internal.h
b/arch/or1k/src/common/up_internal.h
index 6c18457..7467267 100644
--- a/arch/or1k/src/common/up_internal.h
+++ b/arch/or1k/src/common/up_internal.h
@@ -279,10 +279,6 @@ void up_serialinit(void);
void up_earlyserialinit(void);
#endif
-#ifdef CONFIG_RPMSG_UART
-void rpmsg_serialinit(void);
-#endif
-
/* DMA **********************************************************************/
#ifdef CONFIG_ARCH_DMA
@@ -305,10 +301,6 @@ void up_addregion(void);
# define up_addregion()
#endif
-/* Watchdog timer ***********************************************************/
-
-void up_wdtinit(void);
-
/* Networking ***************************************************************/
/* Defined in board/xyz_network.c for board-specific Ethernet
diff --git a/arch/renesas/src/common/up_initialize.c
b/arch/renesas/src/common/up_initialize.c
index 21d788d..7050372 100644
--- a/arch/renesas/src/common/up_initialize.c
+++ b/arch/renesas/src/common/up_initialize.c
@@ -22,22 +22,9 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
#include <nuttx/board.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/note/note_driver.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
+#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
@@ -65,10 +52,6 @@
void up_initialize(void)
{
- /* Initialize global variables */
-
- g_current_regs = NULL;
-
#ifdef CONFIG_PM
/* Initialize the power management subsystem. This MCU-specific function
* must be called *very* early in the initialization sequence *before* any
@@ -79,97 +62,20 @@ void up_initialize(void)
up_pminitialize();
#endif
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DEV_LOOP)
- loop_register(); /* Standard /dev/loop */
-#endif
-
-#if defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver). NOTE that the naming implies that the console is a
- * serial driver. That is usually the case, however, if no UARTs are
- * enabled, the console could also be provided through some other device,
- * such as an LCD.
- * Architecture-specific logic will have to detect that case.
- */
-
-#if defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- ptmx_register();
-#endif
-
-#if defined(CONFIG_CRYPTO)
- /* Initialize the HW crypto and /dev/crypto */
-
- up_cryptoinitialize();
-#endif
-
-#ifdef CONFIG_CRYPTO_CRYPTODEV
- devcrypto_register();
-#endif
-
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
-#ifdef CONFIG_NET_LOOPBACK
- /* Initialize the local loopback device */
-
- localhost_initialize();
-#endif
-
-#ifdef CONFIG_NET_TUN
- /* Initialize the TUN device */
-
- tun_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- telnet_initialize();
-#endif
-
/* Initialize USB */
up_usbinitialize();
-
board_autoled_on(LED_IRQSENABLED);
}
diff --git a/arch/renesas/src/common/up_internal.h
b/arch/renesas/src/common/up_internal.h
index 517108a..da00a77 100644
--- a/arch/renesas/src/common/up_internal.h
+++ b/arch/renesas/src/common/up_internal.h
@@ -164,14 +164,6 @@ void up_consoleinit(void);
void up_serialinit(void);
#endif
-#ifdef CONFIG_RPMSG_UART
-void rpmsg_serialinit(void);
-#endif
-
-/* Defined in xyz_watchdog.c */
-
-void up_wdtinit(void);
-
/* Defined in board/xyz_lcd.c */
#ifdef CONFIG_SLCD_CONSOLE
diff --git a/arch/risc-v/src/common/riscv_initialize.c
b/arch/risc-v/src/common/riscv_initialize.c
index bcf07ba..f7ebfe1 100644
--- a/arch/risc-v/src/common/riscv_initialize.c
+++ b/arch/risc-v/src/common/riscv_initialize.c
@@ -22,21 +22,10 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
#include <nuttx/board.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/note/note_driver.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/net/telnet.h>
-
#include <arch/board/board.h>
-#include "sched/sched.h"
#include "riscv_arch.h"
#include "riscv_internal.h"
@@ -111,63 +100,11 @@ void up_initialize(void)
riscv_pminitialize();
#endif
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
riscv_serialinit();
#endif
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver).
- */
-
-#if defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- ptmx_register();
-#endif
-
-#ifdef CONFIG_NET_LOOPBACK
- /* Initialize the local loopback device */
-
- localhost_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- telnet_initialize();
-#endif
-
board_autoled_on(LED_IRQSENABLED);
}
diff --git a/arch/risc-v/src/common/riscv_internal.h
b/arch/risc-v/src/common/riscv_internal.h
index 000727a..f64216e 100644
--- a/arch/risc-v/src/common/riscv_internal.h
+++ b/arch/risc-v/src/common/riscv_internal.h
@@ -225,10 +225,6 @@ void riscv_serialinit(void);
void riscv_earlyserialinit(void);
#endif
-#ifdef CONFIG_RPMSG_UART
-void rpmsg_serialinit(void);
-#endif
-
/* Exception Handler ********************************************************/
void riscv_fault(int irq, uintptr_t *regs);
diff --git a/arch/risc-v/src/esp32c3/esp32c3_irq.h
b/arch/risc-v/src/esp32c3/esp32c3_irq.h
index 8f0d0da..54cd410 100644
--- a/arch/risc-v/src/esp32c3/esp32c3_irq.h
+++ b/arch/risc-v/src/esp32c3/esp32c3_irq.h
@@ -42,12 +42,6 @@
#define ESP32C3_INT_PRIO_DEF 1
/****************************************************************************
- * Name: up_irqinitialize
- ****************************************************************************/
-
-void up_irqinitialize(void);
-
-/****************************************************************************
* Name: esp32c3_bind_irq
*
* Description:
diff --git a/arch/risc-v/src/esp32c3/esp32c3_pminitialize.c
b/arch/risc-v/src/esp32c3/esp32c3_pminitialize.c
index 4625d90..ee25f78 100644
--- a/arch/risc-v/src/esp32c3/esp32c3_pminitialize.c
+++ b/arch/risc-v/src/esp32c3/esp32c3_pminitialize.c
@@ -23,7 +23,6 @@
****************************************************************************/
#include <nuttx/config.h>
-#include <nuttx/power/pm.h>
#include "esp32c3_pm.h"
@@ -43,9 +42,6 @@
void riscv_pminitialize(void)
{
- /* Then initialize the NuttX power management subsystem proper */
-
- pm_initialize();
}
#endif /* CONFIG_PM */
diff --git a/arch/risc-v/src/rv32m1/rv32m1_serial.c
b/arch/risc-v/src/rv32m1/rv32m1_serial.c
index df50c51..c7cb8a1 100644
--- a/arch/risc-v/src/rv32m1/rv32m1_serial.c
+++ b/arch/risc-v/src/rv32m1/rv32m1_serial.c
@@ -36,7 +36,6 @@
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <nuttx/serial/serial.h>
-#include <nuttx/power/pm.h>
#ifdef CONFIG_SERIAL_TERMIOS
# include <termios.h>
diff --git a/arch/sim/src/sim/up_initialize.c b/arch/sim/src/sim/up_initialize.c
index 1d32e12..7b64098 100644
--- a/arch/sim/src/sim/up_initialize.c
+++ b/arch/sim/src/sim/up_initialize.c
@@ -22,30 +22,13 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <assert.h>
-#include <debug.h>
-
#include <nuttx/arch.h>
#include <nuttx/audio/audio.h>
-#include <nuttx/clock.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/fs/ioctl.h>
#include <nuttx/kthread.h>
#include <nuttx/motor/foc/foc_dummy.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
#include <nuttx/mtd/mtd.h>
-#include <nuttx/note/note_driver.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/serial/pty.h>
#include <nuttx/spi/spi_flash.h>
#include <nuttx/spi/qspi_flash.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
#include "up_internal.h"
@@ -206,19 +189,6 @@ static int up_loop_task(int argc, FAR char **argv)
return 0;
}
-static void up_loop_init(void)
-{
- int ret;
-
- /* Use loop_task to simulate the IRQ */
-
- ret = kthread_create("loop_task", 1,
- CONFIG_DEFAULT_TASK_STACKSIZE,
- up_loop_task, NULL);
-
- DEBUGASSERT(ret > 0);
-}
-
/****************************************************************************
* Public Functions
****************************************************************************/
@@ -245,70 +215,10 @@ static void up_loop_init(void)
void up_initialize(void)
{
-#ifdef CONFIG_PM
- /* Initialize the power management subsystem. This MCU-specific function
- * must be called *very* early in the initialization sequence *before* any
- * other device drivers are initialized (since they may attempt to register
- * with the power management subsystem).
- */
-
- pm_initialize();
-#endif
-
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DEV_LOOP)
- loop_register(); /* Standard /dev/loop */
-#endif
-
-#if defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
/* Register some tty-port to access tty-port on sim platform */
up_uartinit();
-#if defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- ptmx_register();
-#endif
-
-#if defined(CONFIG_CRYPTO)
- /* Initialize the HW crypto and /dev/crypto */
-
- up_cryptoinitialize();
-#endif
-
-#ifdef CONFIG_CRYPTO_CRYPTODEV
- devcrypto_register();
-#endif
-
#if defined(CONFIG_FS_FAT) && !defined(CONFIG_DISABLE_MOUNTPOINT)
up_registerblockdevice(); /* Our FAT ramdisk at /dev/ram0 */
#endif
@@ -323,24 +233,6 @@ void up_initialize(void)
usrsock_init();
#endif
-#ifdef CONFIG_NET_LOOPBACK
- /* Initialize the local loopback device */
-
- localhost_initialize();
-#endif
-
-#ifdef CONFIG_NET_TUN
- /* Initialize the TUN device */
-
- tun_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- telnet_initialize();
-#endif
-
#if defined(CONFIG_FS_SMARTFS) && defined(CONFIG_MTD_SMART) && \
(defined(CONFIG_SPI_FLASH) || defined(CONFIG_QSPI_FLASH))
up_init_smartfs();
@@ -351,5 +243,7 @@ void up_initialize(void)
audio_register("pcm0c", sim_audio_initialize(false));
#endif
- up_loop_init();
+ kthread_create("loop_task", SCHED_PRIORITY_MIN,
+ CONFIG_DEFAULT_TASK_STACKSIZE,
+ up_loop_task, NULL);
}
diff --git a/arch/sim/src/sim/up_internal.h b/arch/sim/src/sim/up_internal.h
index 3784cc4..bdcf87b 100644
--- a/arch/sim/src/sim/up_internal.h
+++ b/arch/sim/src/sim/up_internal.h
@@ -189,12 +189,6 @@ int up_init_ipi(int irq);
void up_timer_update(void);
#endif
-/* rpmsg_serialinit *********************************************************/
-
-#ifdef CONFIG_RPMSG_UART
-void rpmsg_serialinit(void);
-#endif
-
/* up_uart.c ****************************************************************/
void up_uartinit(void);
diff --git a/arch/sparc/src/common/up_initialize.c
b/arch/sparc/src/common/up_initialize.c
index 6b95e99..2c75598 100644
--- a/arch/sparc/src/common/up_initialize.c
+++ b/arch/sparc/src/common/up_initialize.c
@@ -22,23 +22,8 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
-#include <nuttx/sched_note.h>
-#include <nuttx/mm/iob.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/syslog/syslog.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-
+#include <nuttx/board.h>
#include <arch/board/board.h>
#include "up_arch.h"
@@ -140,10 +125,6 @@ static inline void up_color_intstack(void)
void up_initialize(void)
{
- /* Initialize global variables */
-
- g_current_regs = NULL;
-
/* Colorize the interrupt stack */
up_color_intstack();
@@ -152,10 +133,6 @@ void up_initialize(void)
up_addregion();
- /* Initialize the interrupt subsystem */
-
- up_irqinitialize();
-
#ifdef CONFIG_ARCH_DMA
/* Initialize the DMA subsystem if the weak function up_dma_initialize has
* been brought into the build
@@ -169,109 +146,12 @@ void up_initialize(void)
}
#endif
-#ifdef CONFIG_MM_IOB
- /* Initialize IO buffering */
-
- iob_initialize();
-#endif
-
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DEV_LOOP)
- loop_register(); /* Standard /dev/loop */
-#endif
-
-#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
- defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver).
- */
-
-#if defined(CONFIG_DEV_LOWCONSOLE)
- lowconsole_init();
-#elif defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#elif defined(CONFIG_RAMLOG_CONSOLE)
- ramlog_consoleinit();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- (void)ptmx_register();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver).
- */
-
-#if defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#if defined(CONFIG_CRYPTO)
- /* Initialize the HW crypto and /dev/crypto */
-
- up_cryptoinitialize();
-#endif
-
-#ifdef CONFIG_CRYPTO_CRYPTODEV
- devcrypto_register();
-#endif
-
-#ifndef CONFIG_NETDEV_LATEINIT
- /* Initialize the network */
-
- up_netinitialize();
-#endif
-
-#ifdef CONFIG_NETDEV_LOOPBACK
- /* Initialize the local loopback device */
-
- (void)localhost_initialize();
-#endif
-
-#ifdef CONFIG_NET_TUN
- /* Initialize the TUN device */
-
- (void)tun_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- (void)telnet_initialize();
-#endif
-
/* Initialize USB */
up_usbinitialize();
diff --git a/arch/sparc/src/common/up_internal.h
b/arch/sparc/src/common/up_internal.h
index 9b5bf2e..9812cbc 100644
--- a/arch/sparc/src/common/up_internal.h
+++ b/arch/sparc/src/common/up_internal.h
@@ -183,14 +183,6 @@ void up_copystate(uint32_t *dest, uint32_t *src);
void up_lowputs(const char *str);
-/* Defined in drivers/lowconsole.c */
-
-#ifdef CONFIG_DEV_LOWCONSOLE
-void lowconsole_init(void);
-#else
-# define lowconsole_init()
-#endif
-
/* Debug */
#ifdef CONFIG_ARCH_STACKDUMP
@@ -217,7 +209,6 @@ void up_sigdeliver(void);
/* IRQs */
-void up_irqinitialize(void);
bool up_pending_irq(int irq);
void up_clrpend_irq(int irq);
@@ -241,8 +232,6 @@ void up_lowputc(char ch);
void up_earlyserialinit(void);
void up_serialinit(void);
-void rpmsg_serialinit(void);
-
/* Network */
#if defined(CONFIG_NET) && !defined(CONFIG_NETDEV_LATEINIT)
diff --git a/arch/x86/src/common/up_initialize.c
b/arch/x86/src/common/up_initialize.c
index d90c91b..4c19762 100644
--- a/arch/x86/src/common/up_initialize.c
+++ b/arch/x86/src/common/up_initialize.c
@@ -22,23 +22,8 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
#include <nuttx/board.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/note/note_driver.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
-
#include <arch/board/board.h>
#include "up_arch.h"
@@ -67,10 +52,6 @@
void up_initialize(void)
{
- /* Initialize global variables */
-
- g_current_regs = NULL;
-
/* Add any extra memory fragments to the memory manager */
up_addregion();
@@ -98,90 +79,18 @@ void up_initialize(void)
}
#endif
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DEV_LOOP)
- loop_register(); /* Standard /dev/loop */
-#endif
-
-#if defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver).
- */
-
-#if defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- ptmx_register();
-#endif
-
-#if defined(CONFIG_CRYPTO)
- /* Initialize the HW crypto and /dev/crypto */
-
- up_cryptoinitialize();
-#endif
-
-#ifdef CONFIG_CRYPTO_CRYPTODEV
- devcrypto_register();
-#endif
-
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
-#ifdef CONFIG_NET_LOOPBACK
- /* Initialize the local loopback device */
-
- localhost_initialize();
-#endif
-
-#ifdef CONFIG_NET_TUN
- /* Initialize the TUN device */
-
- tun_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- telnet_initialize();
-#endif
-
/* Initialize USB -- device and/or host */
up_usbinitialize();
diff --git a/arch/x86/src/common/up_internal.h
b/arch/x86/src/common/up_internal.h
index 83f5a75..f841387 100644
--- a/arch/x86/src/common/up_internal.h
+++ b/arch/x86/src/common/up_internal.h
@@ -201,14 +201,6 @@ void up_earlyserialinit(void);
void up_serialinit(void);
#endif
-#ifdef CONFIG_RPMSG_UART
-void rpmsg_serialinit(void);
-#endif
-
-/* Defined in xyz_watchdog.c */
-
-void up_wdtinit(void);
-
/* Defined in board/up_network.c */
#if defined(CONFIG_NET) && !defined(CONFIG_NETDEV_LATEINIT)
diff --git a/arch/x86_64/src/common/up_initialize.c
b/arch/x86_64/src/common/up_initialize.c
index 8d29988..d814124 100644
--- a/arch/x86_64/src/common/up_initialize.c
+++ b/arch/x86_64/src/common/up_initialize.c
@@ -22,28 +22,10 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
#include <nuttx/board.h>
-#include <nuttx/mm/iob.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/syslog/syslog.h>
-#include <nuttx/note/note_driver.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
-
#include <arch/board/board.h>
-#include "sched/sched.h"
#include "up_arch.h"
#include "up_internal.h"
@@ -101,10 +83,6 @@ static void up_calibratedelay(void)
void up_initialize(void)
{
- /* Initialize global variables */
-
- g_current_regs = NULL;
-
/* Add any extra memory fragments to the memory manager */
up_addregion();
@@ -132,90 +110,18 @@ void up_initialize(void)
}
#endif
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DEV_LOOP)
- loop_register(); /* Standard /dev/loop */
-#endif
-
-#if defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver).
- */
-
-#if defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- ptmx_register();
-#endif
-
-#if defined(CONFIG_CRYPTO)
- /* Initialize the HW crypto and /dev/crypto */
-
- up_cryptoinitialize();
-#endif
-
-#ifdef CONFIG_CRYPTO_CRYPTODEV
- devcrypto_register();
-#endif
-
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
-#ifdef CONFIG_NET_LOOPBACK
- /* Initialize the local loopback device */
-
- localhost_initialize();
-#endif
-
-#ifdef CONFIG_NET_TUN
- /* Initialize the TUN device */
-
- tun_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- telnet_initialize();
-#endif
-
/* Initialize USB -- device and/or host */
up_usbinitialize();
diff --git a/arch/x86_64/src/common/up_internal.h
b/arch/x86_64/src/common/up_internal.h
index 222d642..f50a058 100644
--- a/arch/x86_64/src/common/up_internal.h
+++ b/arch/x86_64/src/common/up_internal.h
@@ -189,7 +189,6 @@ void x86_64_boardinitialize(void);
void up_copystate(uint64_t *dest, uint64_t *src);
void up_savestate(uint64_t *regs);
void up_decodeirq(uint64_t *regs);
-void up_irqinitialize(void);
#ifdef CONFIG_ARCH_DMA
void weak_function up_dmainitialize(void);
#endif
@@ -218,10 +217,6 @@ void up_addregion(void);
void up_earlyserialinit(void);
void up_serialinit(void);
-/* Defined in xyz_watchdog.c */
-
-void up_wdtinit(void);
-
/* Defined in xyz_timerisr.c */
void x86_64_timer_calibrate_freq(void);
diff --git a/arch/xtensa/src/common/xtensa.h b/arch/xtensa/src/common/xtensa.h
index b3baf52..43d59af 100644
--- a/arch/xtensa/src/common/xtensa.h
+++ b/arch/xtensa/src/common/xtensa.h
@@ -320,8 +320,6 @@ void up_lowputc(char ch);
void xtensa_earlyserialinit(void);
void xtensa_serialinit(void);
-void rpmsg_serialinit(void);
-
/* Network */
#if defined(CONFIG_NET) && !defined(CONFIG_NETDEV_LATEINIT)
diff --git a/arch/xtensa/src/common/xtensa_initialize.c
b/arch/xtensa/src/common/xtensa_initialize.c
index 5db6872..a8f98f1 100644
--- a/arch/xtensa/src/common/xtensa_initialize.c
+++ b/arch/xtensa/src/common/xtensa_initialize.c
@@ -22,23 +22,8 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
#include <nuttx/board.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/note/note_driver.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
-
#include <arch/board/board.h>
#include "xtensa.h"
@@ -99,17 +84,8 @@ static inline void xtensa_color_intstack(void)
void up_initialize(void)
{
- int i;
-
xtensa_color_intstack();
- /* Initialize global variables */
-
- for (i = 0; i < CONFIG_SMP_NCPUS; i++)
- {
- g_current_regs[i] = NULL;
- }
-
/* Add any extra memory fragments to the memory manager */
xtensa_add_region();
@@ -143,90 +119,18 @@ void up_initialize(void)
}
#endif
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DEV_LOOP)
- loop_register(); /* Standard /dev/loop */
-#endif
-
-#if defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
xtensa_serialinit();
#endif
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver).
- */
-
-#if defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- ptmx_register();
-#endif
-
-#if defined(CONFIG_CRYPTO)
- /* Initialize the HW crypto and /dev/crypto */
-
- up_cryptoinitialize();
-#endif
-
-#ifdef CONFIG_CRYPTO_CRYPTODEV
- devcrypto_register();
-#endif
-
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
-#ifdef CONFIG_NET_LOOPBACK
- /* Initialize the local loopback device */
-
- localhost_initialize();
-#endif
-
-#ifdef CONFIG_NET_TUN
- /* Initialize the TUN device */
-
- tun_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- telnet_initialize();
-#endif
-
/* Initialize USB -- device and/or host */
up_usbinitialize();
diff --git a/arch/xtensa/src/esp32/esp32_pminitialize.c
b/arch/xtensa/src/esp32/esp32_pminitialize.c
index f040202..7b04937 100644
--- a/arch/xtensa/src/esp32/esp32_pminitialize.c
+++ b/arch/xtensa/src/esp32/esp32_pminitialize.c
@@ -23,8 +23,8 @@
****************************************************************************/
#include <nuttx/config.h>
-#include <nuttx/power/pm.h>
+#include "xtensa.h"
#include "esp32_pm.h"
#ifdef CONFIG_PM
@@ -46,10 +46,6 @@ void xtensa_pminitialize(void)
/* Initialize RTC parameters */
esp32_pminit();
-
- /* Then initialize the NuttX power management subsystem proper */
-
- pm_initialize();
}
#endif /* CONFIG_PM */
diff --git a/arch/z16/src/common/z16_initialize.c
b/arch/z16/src/common/z16_initialize.c
index 08406f4..41ea700 100644
--- a/arch/z16/src/common/z16_initialize.c
+++ b/arch/z16/src/common/z16_initialize.c
@@ -22,23 +22,8 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
#include <nuttx/board.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/note/note_driver.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
-
#include <arch/board/board.h>
#include "z16_arch.h"
@@ -78,10 +63,6 @@ volatile FAR chipreg_t *g_current_regs;
void up_initialize(void)
{
- /* Initialize global variables */
-
- g_current_regs = NULL;
-
#if CONFIG_MM_REGIONS > 1
/* Add any extra memory fragments to the memory manager */
@@ -98,89 +79,17 @@ void up_initialize(void)
up_pminitialize();
#endif
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DEV_LOOP)
- loop_register(); /* Standard /dev/loop */
-#endif
-
-#if defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
z16_serialinit();
#endif
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver).
- */
-
-#if defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- ptmx_register();
-#endif
-
-#if defined(CONFIG_CRYPTO)
- /* Initialize the HW crypto and /dev/crypto */
-
- up_cryptoinitialize();
-#endif
-
-#ifdef CONFIG_CRYPTO_CRYPTODEV
- devcrypto_register();
-#endif
-
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
z16_netinitialize();
#endif
-#ifdef CONFIG_NET_LOOPBACK
- /* Initialize the local loopback device */
-
- localhost_initialize();
-#endif
-
-#ifdef CONFIG_NET_TUN
- /* Initialize the TUN device */
-
- tun_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- telnet_initialize();
-#endif
-
board_autoled_on(LED_IRQSENABLED);
}
diff --git a/arch/z16/src/common/z16_internal.h
b/arch/z16/src/common/z16_internal.h
index ca72a21..bd3c349 100644
--- a/arch/z16/src/common/z16_internal.h
+++ b/arch/z16/src/common/z16_internal.h
@@ -148,10 +148,6 @@ void z16_serialinit(void);
void z16_earlyserialinit(void);
#endif
-#ifdef CONFIG_RPMSG_UART
-void rpmsg_serialinit(void);
-#endif
-
/* Defined in xyz_irq.c */
void z16_ack_irq(int irq);
diff --git a/arch/z80/src/common/z80_initialize.c
b/arch/z80/src/common/z80_initialize.c
index ba560d9..a66cb9d 100644
--- a/arch/z80/src/common/z80_initialize.c
+++ b/arch/z80/src/common/z80_initialize.c
@@ -22,24 +22,8 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
#include <nuttx/arch.h>
#include <nuttx/board.h>
-#include <nuttx/mm/mm.h>
-#include <nuttx/drivers/drivers.h>
-#include <nuttx/fs/loop.h>
-#include <nuttx/net/loopback.h>
-#include <nuttx/net/telnet.h>
-#include <nuttx/net/tun.h>
-#include <nuttx/note/note_driver.h>
-#include <nuttx/syslog/syslog_console.h>
-#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
-
#include <arch/board/board.h>
#include "chip/switch.h"
@@ -97,89 +81,17 @@ void up_initialize(void)
z80_mmu_initialize();
#endif
- /* Register devices */
-
-#if defined(CONFIG_DEV_NULL)
- devnull_register(); /* Standard /dev/null */
-#endif
-
-#if defined(CONFIG_DEV_RANDOM)
- devrandom_register(); /* Standard /dev/random */
-#endif
-
-#if defined(CONFIG_DEV_URANDOM)
- devurandom_register(); /* Standard /dev/urandom */
-#endif
-
-#if defined(CONFIG_DEV_ZERO)
- devzero_register(); /* Standard /dev/zero */
-#endif
-
-#if defined(CONFIG_DEV_LOOP)
- loop_register(); /* Standard /dev/loop */
-#endif
-
-#if defined(CONFIG_DRIVER_NOTE)
- note_register(); /* Non-standard /dev/note */
-#endif
-
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
z80_serial_initialize();
#endif
-#ifdef CONFIG_RPMSG_UART
- rpmsg_serialinit();
-#endif
-
- /* Initialize the console device driver (if it is other than the standard
- * serial driver).
- */
-
-#if defined(CONFIG_CONSOLE_SYSLOG)
- syslog_console_init();
-#endif
-
-#ifdef CONFIG_PSEUDOTERM_SUSV1
- /* Register the master pseudo-terminal multiplexor device */
-
- ptmx_register();
-#endif
-
-#if defined(CONFIG_CRYPTO)
- /* Initialize the HW crypto and /dev/crypto */
-
- up_cryptoinitialize();
-#endif
-
-#ifdef CONFIG_CRYPTO_CRYPTODEV
- devcrypto_register();
-#endif
-
#ifndef CONFIG_NETDEV_LATEINIT
/* Initialize the network */
up_netinitialize();
#endif
-#ifdef CONFIG_NET_LOOPBACK
- /* Initialize the local loopback device */
-
- localhost_initialize();
-#endif
-
-#ifdef CONFIG_NET_TUN
- /* Initialize the TUN device */
-
- tun_initialize();
-#endif
-
-#ifdef CONFIG_NETDEV_TELNET
- /* Initialize the Telnet session factory */
-
- telnet_initialize();
-#endif
-
board_autoled_on(LED_IRQSENABLED);
}
diff --git a/arch/z80/src/common/z80_internal.h
b/arch/z80/src/common/z80_internal.h
index d9fa7d1..226b17d 100644
--- a/arch/z80/src/common/z80_internal.h
+++ b/arch/z80/src/common/z80_internal.h
@@ -105,12 +105,6 @@ void z80_serial_initialize(void);
# define z80_serial_initialize()
#endif
-#ifdef CONFIG_RPMSG_UART
-void rpmsg_serialinit(void);
-#else
-# define rpmsg_serialinit()
-#endif
-
/* Architecture specific hook into the timer interrupt handler */
#ifdef CONFIG_ARCH_TIMERHOOK
diff --git a/boards/arm/lpc17xx_40xx/lpc4088-devkit/src/lpc17_40_userleds.c
b/boards/arm/lpc17xx_40xx/lpc4088-devkit/src/lpc17_40_userleds.c
index 7448822..b8ca942 100644
--- a/boards/arm/lpc17xx_40xx/lpc4088-devkit/src/lpc17_40_userleds.c
+++ b/boards/arm/lpc17xx_40xx/lpc4088-devkit/src/lpc17_40_userleds.c
@@ -28,8 +28,8 @@
#include <stdbool.h>
#include <debug.h>
+#include <nuttx/board.h>
#include <arch/board/board.h>
-#include <nuttx/power/pm.h>
#include "chip.h"
#include "arm_arch.h"
diff --git a/boards/arm/lpc17xx_40xx/lpc4088-quickstart/src/lpc17_40_userleds.c
b/boards/arm/lpc17xx_40xx/lpc4088-quickstart/src/lpc17_40_userleds.c
index 3218312..2c79fe1 100644
--- a/boards/arm/lpc17xx_40xx/lpc4088-quickstart/src/lpc17_40_userleds.c
+++ b/boards/arm/lpc17xx_40xx/lpc4088-quickstart/src/lpc17_40_userleds.c
@@ -28,8 +28,8 @@
#include <stdbool.h>
#include <debug.h>
+#include <nuttx/board.h>
#include <arch/board/board.h>
-#include <nuttx/power/pm.h>
#include "chip.h"
#include "arm_arch.h"
diff --git a/boards/arm/lpc17xx_40xx/lx_cpu/src/lpc17_40_userleds.c
b/boards/arm/lpc17xx_40xx/lx_cpu/src/lpc17_40_userleds.c
index 765c12b..de567f2 100644
--- a/boards/arm/lpc17xx_40xx/lx_cpu/src/lpc17_40_userleds.c
+++ b/boards/arm/lpc17xx_40xx/lx_cpu/src/lpc17_40_userleds.c
@@ -28,8 +28,8 @@
#include <stdbool.h>
#include <debug.h>
+#include <nuttx/board.h>
#include <arch/board/board.h>
-#include <nuttx/power/pm.h>
#include "chip.h"
#include "arm_arch.h"
diff --git a/boards/arm/lpc17xx_40xx/mbed/src/lpc17_40_userleds.c
b/boards/arm/lpc17xx_40xx/mbed/src/lpc17_40_userleds.c
index 735af9d..de5a5e8 100644
--- a/boards/arm/lpc17xx_40xx/mbed/src/lpc17_40_userleds.c
+++ b/boards/arm/lpc17xx_40xx/mbed/src/lpc17_40_userleds.c
@@ -29,7 +29,6 @@
#include <debug.h>
#include <nuttx/board.h>
-#include <nuttx/power/pm.h>
#include <arch/board/board.h>
#include "chip.h"
diff --git a/boards/arm/lpc17xx_40xx/open1788/src/lpc17_40_userleds.c
b/boards/arm/lpc17xx_40xx/open1788/src/lpc17_40_userleds.c
index 4e7b6de..d940232 100644
--- a/boards/arm/lpc17xx_40xx/open1788/src/lpc17_40_userleds.c
+++ b/boards/arm/lpc17xx_40xx/open1788/src/lpc17_40_userleds.c
@@ -28,8 +28,8 @@
#include <stdbool.h>
#include <debug.h>
+#include <nuttx/board.h>
#include <arch/board/board.h>
-#include <nuttx/power/pm.h>
#include "chip.h"
#include "arm_arch.h"
diff --git a/boards/arm/stm32/axoloti/src/stm32_userleds.c
b/boards/arm/stm32/axoloti/src/stm32_userleds.c
index d7ae3ed..10839c5 100644
--- a/boards/arm/stm32/axoloti/src/stm32_userleds.c
+++ b/boards/arm/stm32/axoloti/src/stm32_userleds.c
@@ -29,7 +29,6 @@
#include <debug.h>
#include <nuttx/board.h>
-#include <nuttx/power/pm.h>
#include <arch/board/board.h>
#include "chip.h"
diff --git a/boards/arm/stm32/mikroe-stm32f4/src/stm32_pm.c
b/boards/arm/stm32/mikroe-stm32f4/src/stm32_pm.c
index 5a8858b..3606f2b 100644
--- a/boards/arm/stm32/mikroe-stm32f4/src/stm32_pm.c
+++ b/boards/arm/stm32/mikroe-stm32f4/src/stm32_pm.c
@@ -24,8 +24,6 @@
#include <nuttx/config.h>
-#include <nuttx/power/pm.h>
-
#include "arm_internal.h"
#include "stm32_pm.h"
#include "mikroe-stm32f4.h"
@@ -56,10 +54,6 @@
void arm_pminitialize(void)
{
- /* Then initialize the NuttX power management subsystem proper */
-
- pm_initialize();
-
#if defined(CONFIG_ARCH_IDLE_CUSTOM) && defined(CONFIG_PM_BUTTONS)
/* Initialize the buttons to wake up the system from low power modes */
diff --git a/boards/arm/stm32/olimex-stm32-e407/src/stm32_userleds.c
b/boards/arm/stm32/olimex-stm32-e407/src/stm32_userleds.c
index 5972fef..79ec22b 100644
--- a/boards/arm/stm32/olimex-stm32-e407/src/stm32_userleds.c
+++ b/boards/arm/stm32/olimex-stm32-e407/src/stm32_userleds.c
@@ -27,8 +27,9 @@
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
+
+#include <nuttx/board.h>
#include <arch/board/board.h>
-#include <nuttx/power/pm.h>
#include "chip.h"
#include "arm_arch.h"
diff --git a/boards/arm/stm32/olimex-stm32-h407/src/stm32_userleds.c
b/boards/arm/stm32/olimex-stm32-h407/src/stm32_userleds.c
index 3c09ccb..0c4798e 100644
--- a/boards/arm/stm32/olimex-stm32-h407/src/stm32_userleds.c
+++ b/boards/arm/stm32/olimex-stm32-h407/src/stm32_userleds.c
@@ -27,8 +27,9 @@
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
+
+#include <nuttx/board.h>
#include <arch/board/board.h>
-#include <nuttx/power/pm.h>
#include "chip.h"
#include "arm_arch.h"
diff --git a/boards/arm/stm32/omnibusf4/src/stm32_pm.c
b/boards/arm/stm32/omnibusf4/src/stm32_pm.c
index 18bab41..2d6e8ef 100644
--- a/boards/arm/stm32/omnibusf4/src/stm32_pm.c
+++ b/boards/arm/stm32/omnibusf4/src/stm32_pm.c
@@ -24,9 +24,6 @@
#include <nuttx/config.h>
-#include <nuttx/board.h>
-#include <nuttx/power/pm.h>
-
#include "arm_internal.h"
#include "stm32_pm.h"
#include "omnibusf4.h"
@@ -57,10 +54,6 @@
void arm_pminitialize(void)
{
- /* Then initialize the NuttX power management subsystem proper */
-
- pm_initialize();
-
#if defined(CONFIG_ARCH_IDLE_CUSTOM) && defined(CONFIG_PM_BUTTONS)
/* Initialize the buttons to wake up the system from low power modes */
diff --git a/boards/arm/stm32/stm3210e-eval/src/stm32_pm.c
b/boards/arm/stm32/stm3210e-eval/src/stm32_pm.c
index d3f26a0..e01ff24 100644
--- a/boards/arm/stm32/stm3210e-eval/src/stm32_pm.c
+++ b/boards/arm/stm32/stm3210e-eval/src/stm32_pm.c
@@ -24,8 +24,6 @@
#include <nuttx/config.h>
-#include <nuttx/power/pm.h>
-
#include "arm_internal.h"
#include "stm32_pm.h"
#include "stm3210e-eval.h"
@@ -56,10 +54,6 @@
void arm_pminitialize(void)
{
- /* Then initialize the NuttX power management subsystem proper */
-
- pm_initialize();
-
#if defined(CONFIG_ARCH_IDLE_CUSTOM) && defined(CONFIG_PM_BUTTONS)
/* Initialize the buttons to wake up the system from low power modes */
diff --git a/boards/arm/stm32/stm32f4discovery/src/stm32_pm.c
b/boards/arm/stm32/stm32f4discovery/src/stm32_pm.c
index b10656e..5e41b42 100644
--- a/boards/arm/stm32/stm32f4discovery/src/stm32_pm.c
+++ b/boards/arm/stm32/stm32f4discovery/src/stm32_pm.c
@@ -24,9 +24,6 @@
#include <nuttx/config.h>
-#include <nuttx/board.h>
-#include <nuttx/power/pm.h>
-
#include "arm_internal.h"
#include "stm32_pm.h"
#include "stm32f4discovery.h"
@@ -57,10 +54,6 @@
void arm_pminitialize(void)
{
- /* Then initialize the NuttX power management subsystem proper */
-
- pm_initialize();
-
#if defined(CONFIG_ARCH_IDLE_CUSTOM) && defined(CONFIG_PM_BUTTONS)
/* Initialize the buttons to wake up the system from low power modes */
diff --git a/boards/arm/stm32/stm32vldiscovery/src/stm32_leds.c
b/boards/arm/stm32/stm32vldiscovery/src/stm32_leds.c
index 4b3aaee..7c373da 100644
--- a/boards/arm/stm32/stm32vldiscovery/src/stm32_leds.c
+++ b/boards/arm/stm32/stm32vldiscovery/src/stm32_leds.c
@@ -29,7 +29,6 @@
#include <debug.h>
#include <nuttx/board.h>
-#include <nuttx/power/pm.h>
#include <arch/board/board.h>
#include "chip.h"
diff --git a/drivers/Makefile b/drivers/Makefile
index d6b5324..bfe6cf1 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -20,6 +20,8 @@
include $(TOPDIR)/Make.defs
+CSRCS = drivers_initialize.c
+
# Include support for various drivers. Each Make.defs file will add its
# files to the source file list, add its DEPPATH info, and will add
# the appropriate paths to the VPATH variable
diff --git a/arch/renesas/src/common/up_initialize.c
b/drivers/drivers_initialize.c
similarity index 64%
copy from arch/renesas/src/common/up_initialize.c
copy to drivers/drivers_initialize.c
index 21d788d..755af2f 100644
--- a/arch/renesas/src/common/up_initialize.c
+++ b/drivers/drivers_initialize.c
@@ -1,5 +1,5 @@
/****************************************************************************
- * arch/renesas/src/common/up_initialize.c
+ * drivers/drivers_initialize.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
@@ -22,65 +22,47 @@
* Included Files
****************************************************************************/
-#include <nuttx/config.h>
-
-#include <debug.h>
-
-#include <nuttx/arch.h>
-#include <nuttx/board.h>
+#include <nuttx/crypto/crypto.h>
#include <nuttx/drivers/drivers.h>
#include <nuttx/fs/loop.h>
#include <nuttx/net/loopback.h>
#include <nuttx/net/tun.h>
#include <nuttx/net/telnet.h>
#include <nuttx/note/note_driver.h>
+#include <nuttx/power/pm.h>
+#include <nuttx/syslog/syslog.h>
#include <nuttx/syslog/syslog_console.h>
#include <nuttx/serial/pty.h>
-#include <nuttx/crypto/crypto.h>
-#include <nuttx/power/pm.h>
-
-#include "up_arch.h"
-#include "up_internal.h"
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
- * Name: up_initialize
+ * Name: drivers_initialize
*
* Description:
- * up_initialize will be called once during OS initialization after the
- * basic OS services have been initialized. The architecture specific
- * details of initializing the OS will be handled here. Such things as
- * setting up interrupt service routines, starting the clock, and
- * registering device drivers are some of the things that are different
- * for each processor and hardware platform.
+ * drivers_initialize will be called once during OS initialization after
+ * the basic OS services have been initialized.
*
- * up_initialize is called after the OS initialized but before the user
- * initialization logic has been started and before the libraries have
- * been initialized. OS services and driver services are available.
+ * drivers_initialize is called after the OS initialized but before the
+ * user initialization logic has been started and before the libraries
+ * have been initialized. OS services and driver services are available.
*
****************************************************************************/
-void up_initialize(void)
+void drivers_initialize(void)
{
- /* Initialize global variables */
-
- g_current_regs = NULL;
-
#ifdef CONFIG_PM
- /* Initialize the power management subsystem. This MCU-specific function
- * must be called *very* early in the initialization sequence *before* any
- * other device drivers are initialized (since they may attempt to register
- * with the power management subsystem).
- */
+ /* Initialize power management subsystem proper */
- up_pminitialize();
+ pm_initialize();
#endif
/* Register devices */
+ syslog_initialize();
+
#if defined(CONFIG_DEV_NULL)
devnull_register(); /* Standard /dev/null */
#endif
@@ -107,23 +89,17 @@ void up_initialize(void)
/* Initialize the serial device driver */
-#ifdef USE_SERIALDRIVER
- up_serialinit();
-#endif
-
#ifdef CONFIG_RPMSG_UART
rpmsg_serialinit();
#endif
/* Initialize the console device driver (if it is other than the standard
- * serial driver). NOTE that the naming implies that the console is a
- * serial driver. That is usually the case, however, if no UARTs are
- * enabled, the console could also be provided through some other device,
- * such as an LCD.
- * Architecture-specific logic will have to detect that case.
+ * serial driver).
*/
-#if defined(CONFIG_CONSOLE_SYSLOG)
+#if defined(CONFIG_LWL_CONSOLE)
+ lwlconsole_init();
+#elif defined(CONFIG_CONSOLE_SYSLOG)
syslog_console_init();
#endif
@@ -143,12 +119,6 @@ void up_initialize(void)
devcrypto_register();
#endif
-#ifndef CONFIG_NETDEV_LATEINIT
- /* Initialize the network */
-
- up_netinitialize();
-#endif
-
#ifdef CONFIG_NET_LOOPBACK
/* Initialize the local loopback device */
@@ -166,10 +136,4 @@ void up_initialize(void)
telnet_initialize();
#endif
-
- /* Initialize USB */
-
- up_usbinitialize();
-
- board_autoled_on(LED_IRQSENABLED);
}
diff --git a/drivers/efuse/efuse.c b/drivers/efuse/efuse.c
index 65d6342..ffb57b7 100644
--- a/drivers/efuse/efuse.c
+++ b/drivers/efuse/efuse.c
@@ -36,7 +36,6 @@
#include <nuttx/fs/fs.h>
#include <nuttx/irq.h>
#include <nuttx/kmalloc.h>
-#include <nuttx/power/pm.h>
#include <nuttx/semaphore.h>
#include <nuttx/efuse/efuse.h>
diff --git a/include/nuttx/drivers/drivers.h b/include/nuttx/drivers/drivers.h
index cfbf640..c1bc04b 100644
--- a/include/nuttx/drivers/drivers.h
+++ b/include/nuttx/drivers/drivers.h
@@ -44,6 +44,16 @@ extern "C"
#endif
/****************************************************************************
+ * Name: drivers_initialize
+ *
+ * Description:
+ * Initialize chip and board independent general driver
+ *
+ ****************************************************************************/
+
+void drivers_initialize(void);
+
+/****************************************************************************
* Name: devnull_register
*
* Description:
@@ -217,6 +227,16 @@ ssize_t bchlib_write(FAR void *handle, FAR const char
*buffer, size_t offset,
void lwlconsole_init(void);
+/****************************************************************************
+ * Name: rpmsg_serialinit
+ *
+ * Description:
+ * Register rpmsg serial driver
+ *
+ ****************************************************************************/
+
+void rpmsg_serialinit(void);
+
#undef EXTERN
#if defined(__cplusplus)
}
diff --git a/sched/init/nx_start.c b/sched/init/nx_start.c
index 074cafd..7938ce3 100644
--- a/sched/init/nx_start.c
+++ b/sched/init/nx_start.c
@@ -39,8 +39,8 @@
#include <nuttx/mm/mm.h>
#include <nuttx/kmalloc.h>
#include <nuttx/sched_note.h>
-#include <nuttx/syslog/syslog.h>
#include <nuttx/binfmt/binfmt.h>
+#include <nuttx/drivers/drivers.h>
#include <nuttx/init.h>
#include <nuttx/tls.h>
@@ -648,6 +648,10 @@ void nx_start(void)
binfmt_initialize();
#endif
+ /* Initialize common drivers */
+
+ drivers_initialize();
+
/* Initialize Hardware Facilities *****************************************/
/* The processor specific details of running the operating system
@@ -698,15 +702,6 @@ void nx_start(void)
}
}
- /* Start SYSLOG ***********************************************************/
-
- /* Late initialization of the system logging device. Some SYSLOG channel
- * must be initialized late in the initialization sequence because it may
- * depend on having IDLE task file structures setup.
- */
-
- syslog_initialize();
-
#ifdef CONFIG_SMP
/* Start all CPUs *********************************************************/
