This is an automated email from the ASF dual-hosted git repository.
mseidel pushed a commit to branch trunk
in repository https://gitbox.apache.org/repos/asf/openoffice.git
The following commit(s) were added to refs/heads/trunk by this push:
new 6a69588 Fixed typos, removed whitespace
6a69588 is described below
commit 6a6958860763dc3a2c9252da63befc1c63b575ed
Author: mseidel <msei...@apache.org>
AuthorDate: Sun Dec 15 11:53:31 2019 +0100
Fixed typos, removed whitespace
---
.../schema/org/openoffice/Office/Common.xcs | 1314 ++++++++++----------
1 file changed, 656 insertions(+), 658 deletions(-)
diff --git a/main/officecfg/registry/schema/org/openoffice/Office/Common.xcs
b/main/officecfg/registry/schema/org/openoffice/Office/Common.xcs
index 8f1e4f7..714141e 100644
--- a/main/officecfg/registry/schema/org/openoffice/Office/Common.xcs
+++ b/main/officecfg/registry/schema/org/openoffice/Office/Common.xcs
@@ -1,6 +1,6 @@
<?xml version="1.0" encoding="UTF-8"?>
<!--***********************************************************
- *
+ *
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
@@ -8,22 +8,22 @@
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
- *
+ *
* http://www.apache.org/licenses/LICENSE-2.0
- *
+ *
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
- *
+ *
***********************************************************-->
<!DOCTYPE oor:component-schema SYSTEM "../../../../component-schema.dtd">
<oor:component-schema xmlns:oor="http://openoffice.org/2001/registry";
xmlns:xs="http://www.w3.org/2001/XMLSchema";
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; oor:name="Common"
oor:package="org.openoffice.Office" xml:lang="en-US">
- <info>
+ <info>
<desc>Contains common settings which are potentially shared by
other components.</desc>
</info>
<templates>
@@ -837,28 +837,29 @@
</prop>
<prop oor:name="DynamicBorderColors"
oor:type="xs:boolean">
<info>
- <desc>
- specifies whether the controls should use dynamic border coloring,
if possible.
- Dymamic border coloring means that when the mouse is hovered over
a control, and when a control receives the focus, this is indicated with
special border colors.
- </desc>
+ <desc>
+ specifies whether the controls should
use dynamic border coloring, if possible.
+ Dynamic border coloring means that when
the mouse is hovered over a control, and
+ when a control receives the focus, this
is indicated with special border colors.
+ </desc>
</info>
<value>false</value>
</prop>
- <prop oor:name="UseDocumentTextMetrics" oor:type="xs:boolean">
- <info>
- <desc>
- controls whether form controls, when they render their text, use
the same metrics as the document
- does. If this is set to <true>, then the control text's
appearance better matches the text
- in the surrounding document.</p>
- <p>Technically, documents use a reference device for
formatting, which usually has a higher
- resolution than the actual output device. The option decides
whether form controls should use
- the same reference device as the surrounding document. However,
some of OOo's document implementations
- do not properly use their reference device in all situations, in
which case the option might better
- be disabled.<p>
- </desc>
- </info>
- <value>true</value>
- </prop>
+ <prop oor:name="UseDocumentTextMetrics"
oor:type="xs:boolean">
+ <info>
+ <desc>
+ controls whether form controls, when
they render their text, use the same metrics as the document
+ does. If this is set to <true>,
then the control text's appearance better matches the text
+ in the surrounding document.</p>
+ <p>Technically, documents use a
reference device for formatting, which usually has a higher
+ resolution than the actual output
device. The option decides whether form controls should use
+ the same reference device as the
surrounding document. However, some of AOO's document implementations
+ do not properly use their reference
device in all situations, in which case the option might better
+ be disabled.<p>
+ </desc>
+ </info>
+ <value>true</value>
+ </prop>
</group>
<group oor:name="ProductVersionID">
<info>
@@ -970,19 +971,19 @@
<value>false</value>
</prop>
</group>
- <group oor:name="Dictionaries">
- <info>
- <author>CD</author>
- <desc>Contains settings related to dictionaries.</desc>
- </info>
- <prop oor:name="RepositoryURL" oor:type="xs:string">
- <info>
- <author>CD</author>
- <desc>Specifies a repository URL where users can download additional
dictionaries.</desc>
- </info>
- <value/>
- </prop>
- </group>
+ <group oor:name="Dictionaries">
+ <info>
+ <author>CD</author>
+ <desc>Contains settings related to
dictionaries.</desc>
+ </info>
+ <prop oor:name="RepositoryURL" oor:type="xs:string">
+ <info>
+ <author>CD</author>
+ <desc>Specifies a repository URL where
users can download additional dictionaries.</desc>
+ </info>
+ <value/>
+ </prop>
+ </group>
<group oor:name="Drawinglayer">
<info>
<author>AW</author>
@@ -1079,7 +1080,7 @@
<prop oor:name="MaximumPaperWidth" oor:type="xs:int">
<info>
<author>AW</author>
- <desc>Specifies the maximum allowed
Paper Width for page definitions in cm. Default is 3m, i.e. 300 cm. When this
is changed to higher values, it is done on own risk.</desc>
+ <desc>Specifies the maximum allowed
Paper Width for page definitions in cm. Default is 3 m, i.e. 300 cm. When this
is changed to higher values, it is done on own risk.</desc>
<label>Maximum allowed Paper Width for
page definitions</label>
</info>
<value>300</value>
@@ -1087,7 +1088,7 @@
<prop oor:name="MaximumPaperHeight" oor:type="xs:int">
<info>
<author>AW</author>
- <desc>Specifies the maximum allowed
Paper Height for page definitions in cm. Default is 3m, i.e. 300 cm. When this
is changed to higher values, it is done on own risk.</desc>
+ <desc>Specifies the maximum allowed
Paper Height for page definitions in cm. Default is 3 m, i.e. 300 cm. When this
is changed to higher values, it is done on own risk.</desc>
<label>Maximum allowed Paper Height for
page definitions</label>
</info>
<value>300</value>
@@ -1116,141 +1117,141 @@
</info>
<value>9999</value>
</prop>
- <prop oor:name="MaximumPaperBottomMargin" oor:type="xs:int">
- <info>
- <author>AW</author>
- <desc>Specifies the maximum allowed Bottom Margin for the page
definitions in 1/100th cm.</desc>
- <label>Maximum allowed Bottom margin for page definitions</label>
- </info>
- <value>9999</value>
- </prop>
- <prop oor:name="AntiAliasing" oor:type="xs:boolean">
- <info>
- <author>AW</author>
- <desc>
- This switch allows to switch DrawingLayer based views to be
rendered using AntiAliasing or not.
- Of course this takes only effect when AntiAliasing is supported
for the System OOo is running on.
- </desc>
- <label>This switch determines if DrawingLayer based views use
AntiAliasing.</label>
- </info>
- <value>true</value>
- </prop>
- <prop oor:name="SnapHorVerLinesToDiscrete" oor:type="xs:boolean">
- <info>
- <author>AW</author>
- <desc>
- This switch allows to enhance visualisation of graphics which use
Horizontal or Vertical Hairlines
- combined with AntiAliased mode (e.g. in 2D charts). When not used,
those lines will be AntiAliased
- as everything else. Since this is not pleasing for the eye, this
option allows to force those lines
- to snap to discrete points (pixels) when activated and thus avoids
AntiAliasing of pure Horizontal or
- Vertical Hairlines.
- </desc>
- <label>Determines if Horizontal and Vertical HairLines in
AntiAliased mode are snapped to discrete pixles to enhance visualisation</label>
- </info>
- <value>true</value>
- </prop>
- <prop oor:name="RenderDecoratedTextDirect" oor:type="xs:boolean">
- <info>
- <author>AW</author>
- <desc>
- This switch determines if the decorations of decorated text
portions (e.g. underline, strike through)
- are rendered using VCL direct rendering or if the primitive is
decomposed into simple text and the
- corresponding geometrical representations of the decorations.
Default is true since VCL's usage
- of the diverse System's hinting possibilities for decorations is
useful.
- </desc>
- <label>Determines if decorated texts are decomposed at render time
or directly rendered using VCL</label>
- </info>
- <value>true</value>
- </prop>
- <prop oor:name="RenderSimpleTextDirect" oor:type="xs:boolean">
- <info>
- <author>AW</author>
- <desc>
- This switch determines if simple text is directly rendered using
VCL or not. If not, the simple text
- is decomposed into PolyPolygons which will be painted then.
Default is true, since VCL will use the
- hinting for font rendering on the diverse supported systems, which
gives better quality than rendering
- the text as Polygons.
- </desc>
- <label>Determines if simple texts are decomposed at render time or
directly rendered using VCL</label>
- </info>
- <value>true</value>
- </prop>
- <prop oor:name="SolidDragCreate" oor:type="xs:boolean">
- <info>
- <author>AW</author>
- <desc>
- This switch decides if Interactions in the DrawingLayer are
visualized using Wireframe or Full-Object
- previews. If false, only Wireframe will be used. If true,
Full-Object preview which gives a much better
- feedback about the object interaction will be used. This mode is
used for modification and creation of
- objects. During interaction, a geometric copy of the object(s) is
shown with 50% transparence in the
- foreground. That copy shows exactly what You will get when You end
the interaction.
- </desc>
- <label>This switch determines if DrawingLayer Interactions show
Wireframe or Full-Object preview.</label>
- </info>
- <value>true</value>
- </prop>
- <prop oor:name="Quadratic3DRenderLimit" oor:type="xs:int">
- <info>
- <author>AW</author>
- <desc>
- This defines a Limitation for the default raster conversion from
3D Scenes to Bitmaps.
- The number is the maximum number of pixels to use, e.g. 1000x1000
Pixels is allowed as default.
- When Scenes would need more Pixels than this, the Bitmap will be
limited and scaled to the needed pixel size at paint time.
- </desc>
- <label>A Pixel limitation for the creation of 3D Scenes with the
default renderer.</label>
- </info>
- <value>1000000</value>
- </prop>
- <prop oor:name="QuadraticFormControlRenderLimit" oor:type="xs:int">
- <info>
- <author>AW</author>
- <desc>
- This defines a Limitation for the default raster conversion of
FormControls in edit mode.
- These have the ability to be displayed using this fallback to
Bitmaps.
- The number is the maximum number of pixels to use, e.g.
300x150 Pixels is allowed as default.
- When FormControls would need more Pixels than this, the Bitmap
will be limited and scaled to the needed pixel size at paint time.
- </desc>
- <label>A Pixel limitation for the creation of FormControl fallback
display.</label>
- </info>
- <value>45000</value>
- </prop>
- <prop oor:name="TransparentSelection" oor:type="xs:boolean">
- <info>
- <author>AW</author>
- <desc>
- This switch defines if the selections in the applications (text or
cells) are visualized using
- inverse (XOR) when set to false (the old selection method, also
used when in HighContrast mode)
- or a transparent overlay selection using the system's selection
color.
- </desc>
- <label>This switch defines if for text/cell selections the old
inverse or the new transparent selection is to be used.</label>
- </info>
- <value>true</value>
- </prop>
- <prop oor:name="TransparentSelectionPercent" oor:type="xs:short">
- <info>
- <author>AW</author>
- <desc>
- Specifies the degree of transparence to be used when transparent
selection is used. The value is a percent
- value. Since neither no transparence nor complete transparence
makes sense, the value is limited to a range
- of 10% - 90%. If the given value is outside this range, it is
cropped to it.
- </desc>
- <label>Specifies the percent of transparence to use if transparent
selection is used.</label>
- </info>
- <value>75</value>
- </prop>
- <prop oor:name="SelectionMaximumLuminancePercent" oor:type="xs:short">
- <info>
- <author>AW</author>
- <desc>
- Specifies the maximum allowed luminance the system's selection
color may have. When the color
- fetched from the system is brighter (luminacne is bigger), it will
be scaled to a luminance
- of exactly this given value.
- </desc>
- <label>Specifies the maximum allowed luminance for the system's
selection color.</label>
- </info>
- <value>70</value>
- </prop>
- </group>
+ <prop oor:name="MaximumPaperBottomMargin"
oor:type="xs:int">
+ <info>
+ <author>AW</author>
+ <desc>Specifies the maximum allowed
Bottom Margin for the page definitions in 1/100th cm.</desc>
+ <label>Maximum allowed Bottom margin
for page definitions</label>
+ </info>
+ <value>9999</value>
+ </prop>
+ <prop oor:name="AntiAliasing" oor:type="xs:boolean">
+ <info>
+ <author>AW</author>
+ <desc>
+ This switch allows to switch
DrawingLayer based views to be rendered using AntiAliasing or not.
+ Of course this takes only effect when
AntiAliasing is supported for the System AOO is running on.
+ </desc>
+ <label>This switch determines if
DrawingLayer based views use AntiAliasing.</label>
+ </info>
+ <value>true</value>
+ </prop>
+ <prop oor:name="SnapHorVerLinesToDiscrete"
oor:type="xs:boolean">
+ <info>
+ <author>AW</author>
+ <desc>
+ This switch allows to enhance
visualisation of graphics which use Horizontal or Vertical Hairlines
+ combined with AntiAliased mode (e.g. in
2D charts). When not used, those lines will be AntiAliased
+ as everything else. Since this is not
pleasing for the eye, this option allows to force those lines
+ to snap to discrete points (pixels)
when activated and thus avoids AntiAliasing of pure Horizontal or
+ Vertical Hairlines.
+ </desc>
+ <label>Determines if Horizontal and
Vertical HairLines in AntiAliased mode are snapped to discrete pixels to
enhance visualisation</label>
+ </info>
+ <value>true</value>
+ </prop>
+ <prop oor:name="RenderDecoratedTextDirect"
oor:type="xs:boolean">
+ <info>
+ <author>AW</author>
+ <desc>
+ This switch determines if the
decorations of decorated text portions (e.g. underline, strike through)
+ are rendered using VCL direct rendering
or if the primitive is decomposed into simple text and the
+ corresponding geometrical
representations of the decorations. Default is true since VCL's usage
+ of the diverse System's hinting
possibilities for decorations is useful.
+ </desc>
+ <label>Determines if decorated texts
are decomposed at render time or directly rendered using VCL</label>
+ </info>
+ <value>true</value>
+ </prop>
+ <prop oor:name="RenderSimpleTextDirect"
oor:type="xs:boolean">
+ <info>
+ <author>AW</author>
+ <desc>
+ This switch determines if simple text
is directly rendered using VCL or not. If not, the simple text
+ is decomposed into PolyPolygons which
will be painted then. Default is true, since VCL will use the
+ hinting for font rendering on the
diverse supported systems, which gives better quality than rendering
+ the text as Polygons.
+ </desc>
+ <label>Determines if simple texts are
decomposed at render time or directly rendered using VCL</label>
+ </info>
+ <value>true</value>
+ </prop>
+ <prop oor:name="SolidDragCreate" oor:type="xs:boolean">
+ <info>
+ <author>AW</author>
+ <desc>
+ This switch decides if Interactions in
the DrawingLayer are visualized using Wireframe or Full-Object
+ previews. If false, only Wireframe will
be used. If true, Full-Object preview which gives a much better
+ feedback about the object interaction
will be used. This mode is used for modification and creation of
+ objects. During interaction, a
geometric copy of the object(s) is shown with 50% transparency in the
+ foreground. That copy shows exactly
what You will get when You end the interaction.
+ </desc>
+ <label>This switch determines if
DrawingLayer Interactions show Wireframe or Full-Object preview.</label>
+ </info>
+ <value>true</value>
+ </prop>
+ <prop oor:name="Quadratic3DRenderLimit"
oor:type="xs:int">
+ <info>
+ <author>AW</author>
+ <desc>
+ This defines a Limitation for the
default raster conversion from 3D Scenes to Bitmaps.
+ The number is the maximum number of
pixels to use, e.g. 1000x1000 Pixels is allowed as default.
+ When Scenes would need more Pixels than
this, the Bitmap will be limited and scaled to the needed pixel size at paint
time.
+ </desc>
+ <label>A Pixel limitation for the
creation of 3D Scenes with the default renderer.</label>
+ </info>
+ <value>1000000</value>
+ </prop>
+ <prop oor:name="QuadraticFormControlRenderLimit"
oor:type="xs:int">
+ <info>
+ <author>AW</author>
+ <desc>
+ This defines a Limitation for the
default raster conversion of FormControls in edit mode.
+ These have the ability to be displayed
using this fallback to Bitmaps.
+ The number is the maximum number of
pixels to use, e.g. 300x150 Pixels is allowed as default.
+ When FormControls would need more
Pixels than this, the Bitmap will be limited and scaled to the needed pixel
size at paint time.
+ </desc>
+ <label>A Pixel limitation for the
creation of FormControl fallback display.</label>
+ </info>
+ <value>45000</value>
+ </prop>
+ <prop oor:name="TransparentSelection"
oor:type="xs:boolean">
+ <info>
+ <author>AW</author>
+ <desc>
+ This switch defines if the selections
in the applications (text or cells) are visualized using
+ inverse (XOR) when set to false (the
old selection method, also used when in HighContrast mode)
+ or a transparent overlay selection
using the system's selection color.
+ </desc>
+ <label>This switch defines if for
text/cell selections the old inverse or the new transparent selection is to be
used.</label>
+ </info>
+ <value>true</value>
+ </prop>
+ <prop oor:name="TransparentSelectionPercent"
oor:type="xs:short">
+ <info>
+ <author>AW</author>
+ <desc>
+ Specifies the degree of transparency to
be used when transparent selection is used. The value is a percent
+ value. Since neither no transparency
nor complete transparency makes sense, the value is limited to a range
+ of 10% - 90%. If the given value is
outside this range, it is cropped to it.
+ </desc>
+ <label>Specifies the percent of
transparency to use if transparent selection is used.</label>
+ </info>
+ <value>75</value>
+ </prop>
+ <prop oor:name="SelectionMaximumLuminancePercent"
oor:type="xs:short">
+ <info>
+ <author>AW</author>
+ <desc>
+ Specifies the maximum allowed luminance
the system's selection color may have. When the color
+ fetched from the system is brighter
(luminance is bigger), it will be scaled to a luminance
+ of exactly this given value.
+ </desc>
+ <label>Specifies the maximum allowed
luminance for the system's selection color.</label>
+ </info>
+ <value>70</value>
+ </prop>
+ </group>
<group oor:name="AutoCorrect">
<info>
<author>OS</author>
@@ -1521,25 +1522,25 @@
<author>MBA</author>
<desc>Contains the current and default path
settings used by the Office.</desc>
</info>
- <group oor:name="Info">
- <info>
- <author>CD</author>
- <desc>Contains various properties information purpose only.</desc>
- </info>
- <prop oor:name="WorkPathChanged" oor:type="xs:boolean">
- <info>
- <desc>A flag which is set by the tools options dialog whenever a
user changed the work path.</desc>
- </info>
- <value>true</value>
- </prop>
- </group>
+ <group oor:name="Info">
+ <info>
+ <author>CD</author>
+ <desc>Contains various properties
information purpose only.</desc>
+ </info>
+ <prop oor:name="WorkPathChanged"
oor:type="xs:boolean">
+ <info>
+ <desc>A flag which is set by
the tools options dialog whenever a user changed the work path.</desc>
+ </info>
+ <value>true</value>
+ </prop>
+ </group>
<group oor:name="Current">
<info>
<author>MBA</author>
<desc>Contains the global path
settings, mainly those of the Options dialog.</desc>
</info>
<prop oor:name="OfficeInstall"
oor:type="xs:string">
- <!-- OldLocation:NEW-->
+ <!-- OldLocation:NEW -->
<info>
<deprecated/>
<author>MBA</author>
@@ -1549,7 +1550,7 @@
<!-- JB: Empty default inserted into
empty property node. Remove if NIL was intended -->
</prop>
<prop oor:name="OfficeInstallURL"
oor:type="xs:string">
- <!-- OldLocation:NEW-->
+ <!-- OldLocation:NEW -->
<info>
<deprecated/>
<author>MBA</author>
@@ -1640,7 +1641,7 @@
<author>DL</author>
<desc>Specifies the directory
that is displayed when the dialog for opening a graphic or for saving a new
graphic is called.</desc>
</info>
- <value>$(userurl)/gallery</value>
+ <value>$(userurl)/gallery</value>
</prop>
<prop oor:name="Help" oor:type="xs:string">
<info>
@@ -1896,8 +1897,8 @@
<value>false</value>
</prop>
<set oor:name="FontPairs"
oor:node-type="FontReplacement">
- <!-- OldPath: FontSubstitution-->
- <!-- OldLocation: fntsubst.ini-->
+ <!-- OldPath: FontSubstitution -->
+ <!-- OldLocation: fntsubst.ini -->
<!-- UIHints: Tools - Options - General
- Font replacement -->
<info>
<author>OS</author>
@@ -2039,7 +2040,7 @@
<value>100</value>
</prop>
<prop oor:name="PickListSize" oor:type="xs:int">
- <!--UI hints: File menu-->
+ <!--UI hints: File menu -->
<info>
<desc>Describes the range and current
size of the picklist shown inside the menu.</desc>
</info>
@@ -2068,7 +2069,7 @@
</info>
</set>
<set oor:name="PickList" oor:node-type="HistoryType">
- <!--UI hints: File menu-->
+ <!--UI hints: File menu -->
<info>
<desc>Contains the most recently used
documents displayed in the file menu.</desc>
</info>
@@ -2129,7 +2130,7 @@
</info>
</set>
</group>
- <group oor:name="Save">
+ <group oor:name="Save">
<info>
<author>MBA</author>
<desc>Contains general settings about the
saving process.</desc>
@@ -2137,7 +2138,7 @@
<prop oor:name="WorkingSet" oor:type="xs:boolean">
<!-- OldPath: General/Restore -->
<!-- OldLocation: soffice.cfg -->
- <!-- UIHints: Tools Options - General Save -
[Section] Restore editing view - Open documents-->
+ <!-- UIHints: Tools Options - General Save -
[Section] Restore editing view - Open documents -->
<info>
<author>MBA</author>
<desc>Specifies if the all open windows
and documents should be saved. If set to true, the URLs of all open documents
and all view properties of all open views are saved when terminating the
application.</desc>
@@ -2239,7 +2240,7 @@
<prop oor:name="ViewInfo" oor:type="xs:boolean">
<!-- OldPath: General/Restore -->
<!-- OldLocation: soffice.cfg -->
- <!-- UIHints: Tools Options - General
Save - [Section] Restore editing view - Document view-->
+ <!-- UIHints: Tools Options - General
Save - [Section] Restore editing view - Document view -->
<info>
<author>MBA</author>
<desc>Saves view properties of
last active document view when saving a document.</desc>
@@ -2248,8 +2249,8 @@
<value>true</value>
</prop>
<prop oor:name="PrettyPrinting"
oor:type="xs:boolean">
- <!-- UIHints: Tools Options - General
Save - optimize XML file size-->
- <!--the UI setting is inverse to this
setting-->
+ <!-- UIHints: Tools Options - General
Save - optimize XML file size -->
+ <!--the UI setting is inverse to this
setting -->
<info>
<author>MBA</author>
<desc>Specifies if files saved
in the OOo 6.0 XML file formats should be in pretty printing format. Saving and
loading the document takes more time in pretty printing format.</desc>
@@ -2257,14 +2258,14 @@
</info>
<value>false</value>
</prop>
- <prop oor:name="WarnAlienFormat"
oor:type="xs:boolean">
- <!-- UIHints: Tools Options - General
Save - -->
+ <prop oor:name="WarnAlienFormat"
oor:type="xs:boolean">
+ <!-- UIHints: Tools Options - General
Save - -->
<info>
<author>MBA</author>
- <desc>Specifies if a warning
message is shown if a file is going to be saved to an alien format.</desc>
+ <desc>Specifies if a
warning message is shown if a file is going to be saved to an alien
format.</desc>
<label>Open windows</label>
</info>
- <value>true</value>
+ <value>true</value>
</prop>
<prop oor:name="AlwaysSaveAs"
oor:type="xs:boolean">
<info>
@@ -2276,7 +2277,7 @@
<prop oor:name="SaveBackwardCompatibleODF"
oor:type="xs:boolean">
<info>
<author>PB</author>
- <desc>If the value is "true",
then the ODF that is saved by OpenOffice.org will be backward compatible to
previous minor versions.</desc>
+ <desc>If the value is "true",
then the ODF that is saved by OpenOffice will be backward compatible to
previous minor versions.</desc>
</info>
<value>true</value>
</prop>
@@ -2351,61 +2352,61 @@
<value>true</value>
</prop>
</group>
- <group oor:name="ODF">
- <info>
- <author>PB</author>
- <desc>Specifies ODF settings.</desc>
- </info>
- <prop oor:name="DefaultVersion" oor:type="xs:short">
- <!-- UIHints: Tools - Options - Load/Save - General - ODF
version -->
- <info>
- <author>PB</author>
- <desc>Specifies the default ODF version for saving
documents.</desc>
- </info>
- <constraints>
- <enumeration oor:value="0">
- <info>
- <desc>ODFVER_UNKNOWN</desc>
- </info>
- </enumeration>
- <enumeration oor:value="1">
- <info>
- <desc>ODFVER_010</desc>
- </info>
- </enumeration>
- <enumeration oor:value="2">
- <info>
- <desc>ODFVER_011</desc>
- </info>
- </enumeration>
- <enumeration oor:value="4">
- <info>
- <desc>ODFVER_012</desc>
- </info>
- </enumeration>
- <enumeration oor:value="3">
- <info>
- <desc>ODFVER_LATEST</desc>
- </info>
- </enumeration>
- </constraints>
- <value>3</value>
- </prop>
- <prop oor:name="UseSHA1InODF12" oor:type="xs:boolean">
- <info>
- <author>MAV</author>
- <desc>Specifies whether SHA1 algorithm instead of
SHA256 should be used in ODF12 for StartKey and Checksum generation during
encryption.</desc>
- </info>
- <value>true</value>
- </prop>
- <prop oor:name="UseBlowfishInODF12" oor:type="xs:boolean">
- <info>
- <author>MAV</author>
- <desc>Specifies whether Blowfish algorithm instead of
AES should be used in ODF12 for encryption.</desc>
- </info>
- <value>true</value>
- </prop>
- </group>
+ <group oor:name="ODF">
+ <info>
+ <author>PB</author>
+ <desc>Specifies ODF settings.</desc>
+ </info>
+ <prop oor:name="DefaultVersion"
oor:type="xs:short">
+ <!-- UIHints: Tools - Options -
Load/Save - General - ODF version -->
+ <info>
+ <author>PB</author>
+ <desc>Specifies the default ODF
version for saving documents.</desc>
+ </info>
+ <constraints>
+ <enumeration oor:value="0">
+ <info>
+
<desc>ODFVER_UNKNOWN</desc>
+ </info>
+ </enumeration>
+ <enumeration oor:value="1">
+ <info>
+
<desc>ODFVER_010</desc>
+ </info>
+ </enumeration>
+ <enumeration oor:value="2">
+ <info>
+
<desc>ODFVER_011</desc>
+ </info>
+ </enumeration>
+ <enumeration oor:value="4">
+ <info>
+
<desc>ODFVER_012</desc>
+ </info>
+ </enumeration>
+ <enumeration oor:value="3">
+ <info>
+
<desc>ODFVER_LATEST</desc>
+ </info>
+ </enumeration>
+ </constraints>
+ <value>3</value>
+ </prop>
+ <prop oor:name="UseSHA1InODF12"
oor:type="xs:boolean">
+ <info>
+ <author>MAV</author>
+ <desc>Specifies whether SHA1
algorithm instead of SHA256 should be used in ODF12 for StartKey and Checksum
generation during encryption.</desc>
+ </info>
+ <value>true</value>
+ </prop>
+ <prop oor:name="UseBlowfishInODF12"
oor:type="xs:boolean">
+ <info>
+ <author>MAV</author>
+ <desc>Specifies whether
Blowfish algorithm instead of AES should be used in ODF12 for encryption.</desc>
+ </info>
+ <value>true</value>
+ </prop>
+ </group>
</group>
<group oor:name="Load">
<info>
@@ -2413,7 +2414,7 @@
<desc>Contains settings regarding the loading
of documents.</desc>
</info>
<prop oor:name="UserDefinedSettings"
oor:type="xs:boolean">
- <!-- UIHints: Tools Options - General
Load/Save - General [Section] Load - Load user-defined with the document-->
+ <!-- UIHints: Tools Options - General
Load/Save - General [Section] Load - Load user-defined with the document -->
<info>
<author>MBA</author>
<desc>Specifies whether the user
defined configuration settings are loaded together with the document.</desc>
@@ -2539,13 +2540,13 @@
</info>
<value>false</value>
</prop>
- <prop oor:name="HyperlinksWithCtrlClick"
oor:type="xs:boolean">
- <info>
- <author>PB</author>
- <desc>Specifies whether
ctrl-click is required to follow hyperlinks.</desc>
- </info>
- <value>true</value>
- </prop>
+ <prop oor:name="HyperlinksWithCtrlClick"
oor:type="xs:boolean">
+ <info>
+ <author>PB</author>
+ <desc>Specifies whether
Ctrl-Click is required to follow hyperlinks.</desc>
+ </info>
+ <value>true</value>
+ </prop>
<prop oor:name="MacroSecurityLevel"
oor:type="xs:int">
<info>
<author>GT</author>
@@ -2568,7 +2569,7 @@
<prop oor:name="DisableMacrosExecution"
oor:type="xs:boolean">
<info>
<author>MAV</author>
- <desc>Specifies whether the
macro execution is disabled in general. If it is set to true, the
"MacroSecurityLevel" is ignored. If it is set to false, the mentioned entry
specified the level of macro security.</desc>
+ <desc>Specifies whether the
macro execution is disabled in general. If it is set to true, the
"MacroSecurityLevel" is ignored. If it is set to false, the mentioned entry
specifies the level of macro security.</desc>
</info>
<value>false</value>
</prop>
@@ -2587,8 +2588,8 @@
</info>
<prop oor:name="FontScaling" oor:type="xs:short">
<!--OldPath: General/View -->
- <!--OldLocation: soffice.cfg-->
- <!--UIHints: Tools Options - General View
[Section] Display-->
+ <!--OldLocation: soffice.cfg -->
+ <!--UIHints: Tools Options - General View
[Section] Display -->
<info>
<author>PB</author>
<desc>Specifies the scaling only of the
screen representation [UNIT=%].</desc>
@@ -3082,7 +3083,7 @@
<prop oor:name="Locales"
oor:type="oor:string-list">
<!--OldPath:
OfficeLanguage/[Code]=Installed -->
<!--OldLocation: soffice.ini -->
- <!--The string list has to be filled by
the setup-->
+ <!--The string list has to be filled by
the setup -->
<info>
<desc>Contains the installed
Office languages for the menus and dialogs.</desc>
</info>
@@ -3095,7 +3096,7 @@
<desc>Specifies options related to
printing.</desc>
</info>
<prop oor:name="PrintingModifiesDocument"
oor:type="xs:boolean">
- <!-- UIHints: Tools Options - General Print
[Section] PrinterOptions-->
+ <!-- UIHints: Tools Options - General Print
[Section] PrinterOptions -->
<info>
<author>MBA</author>
<desc>Specifies if printing a document
can modify a document due to reformatting</desc>
@@ -3161,7 +3162,7 @@
<desc>Specifies the options
related to printing.</desc>
</info>
<prop oor:name="ReduceTransparency"
oor:type="xs:boolean">
- <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions -->
<info>
<author>AF</author>
<desc>Indicates whether
to ignore transparency for the output of objects.</desc>
@@ -3170,7 +3171,7 @@
<value>false</value>
</prop>
<prop
oor:name="ReducedTransparencyMode" oor:type="xs:short">
- <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions -->
<info>
<author>AF</author>
<desc>Specifies type of
transparency reduction: 0 - Automatically determine reduction, 1 - Always
disabled.</desc>
@@ -3179,7 +3180,7 @@
<value>0</value>
</prop>
<prop oor:name="ReduceGradients"
oor:type="xs:boolean">
- <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions -->
<info>
<author>AF</author>
<desc>Indicates whether
to reduce memory usage for output of gradients by limiting the number of
gradient steps.</desc>
@@ -3188,7 +3189,7 @@
<value>false</value>
</prop>
<prop oor:name="ReducedGradientMode"
oor:type="xs:short">
- <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions -->
<info>
<author>AF</author>
<desc>Specifies type of
gradient reduction: 0 - reduce the number of stripes, 1 - reduce to
color.</desc>
@@ -3197,7 +3198,7 @@
<value>0</value>
</prop>
<prop
oor:name="ReducedGradientStepCount" oor:type="xs:short">
- <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions -->
<info>
<author>AF</author>
<desc>Specifies the
maximum number stripes used for output of gradients.</desc>
@@ -3206,7 +3207,7 @@
<value>64</value>
</prop>
<prop oor:name="ReduceBitmaps"
oor:type="xs:boolean">
- <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions -->
<info>
<author>AF</author>
<desc>Indicates whether
to reduce the memory usage of bitmaps for print process by limiting the
resolution.</desc>
@@ -3215,7 +3216,7 @@
<value>false</value>
</prop>
<prop oor:name="ReducedBitmapMode"
oor:type="xs:short">
- <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions -->
<info>
<author>AF</author>
<desc>Specifies type of
bitmap reduction: 0 - Automatically determine optimal resolution, 1 - Use
original resolution, 2 - User defined resolution.</desc>
@@ -3224,7 +3225,7 @@
<value>1</value>
</prop>
<prop
oor:name="ReducedBitmapResolution" oor:type="xs:short">
- <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions -->
<info>
<author>AF</author>
<desc>Specifies
resolution of reduced bitmaps: 0 - 72DPI, 1 - 96DPI, 2 - 150DPI, 3 - 200DPI, 4
- 300DPI, 5 - 600DPI.</desc>
@@ -3233,7 +3234,7 @@
<value>3</value>
</prop>
<prop
oor:name="ReducedBitmapIncludesTransparency" oor:type="xs:boolean">
- <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions -->
<info>
<author>AF</author>
<desc>Indicates whether
to reduce the resolution of automatically created substitution bitmaps of
transparent objects.</desc>
@@ -3242,7 +3243,7 @@
<value>true</value>
</prop>
<prop oor:name="ConvertToGreyscales"
oor:type="xs:boolean">
- <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrinterOptions -->
<info>
<author>AF</author>
<desc>Indicates whether
to create only grayscale output of all objects.</desc>
@@ -3257,7 +3258,7 @@
<label>Print File</label>
</info>
<prop oor:name="ReduceTransparency"
oor:type="xs:boolean">
- <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions -->
<info>
<author>AF</author>
<desc>Indicates whether
to ignore transparency for the output of objects.</desc>
@@ -3266,7 +3267,7 @@
<value>false</value>
</prop>
<prop
oor:name="ReducedTransparencyMode" oor:type="xs:short">
- <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions -->
<info>
<author>AF</author>
<desc>Indicates the
type of transparency reduction: 0 - Automatically determine reduction, 1 -
Always disabled.</desc>
@@ -3275,7 +3276,7 @@
<value>0</value>
</prop>
<prop oor:name="ReduceGradients"
oor:type="xs:boolean">
- <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions -->
<info>
<author>AF</author>
<desc>Indicates whether
to reduce memory usage for output of gradients by limiting the number of
gradient steps.</desc>
@@ -3284,7 +3285,7 @@
<value>false</value>
</prop>
<prop oor:name="ReducedGradientMode"
oor:type="xs:short">
- <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions -->
<info>
<author>AF</author>
<desc>Indicates the
type of gradient reduction: 0 - Reduce the number of stripes, 1 - Reduce to
color.</desc>
@@ -3293,7 +3294,7 @@
<value>0</value>
</prop>
<prop
oor:name="ReducedGradientStepCount" oor:type="xs:short">
- <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions -->
<info>
<author>AF</author>
<desc>Specifies the
maximum number stripes used for output of gradients.</desc>
@@ -3302,7 +3303,7 @@
<value>64</value>
</prop>
<prop oor:name="ReduceBitmaps"
oor:type="xs:boolean">
- <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions -->
<info>
<author>AF</author>
<desc>Indicates whether
to reduce the memory usage of bitmaps for the print process by limiting the
resolution.</desc>
@@ -3311,7 +3312,7 @@
<value>false</value>
</prop>
<prop oor:name="ReducedBitmapMode"
oor:type="xs:short">
- <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions -->
<info>
<author>AF</author>
<desc>Specifies the
type of bitmap reduction: 0 - Automatically determine optimal resolution, 1 -
Use original resolution, 2 - User defined resolution.</desc>
@@ -3320,7 +3321,7 @@
<value>1</value>
</prop>
<prop
oor:name="ReducedBitmapResolution" oor:type="xs:short">
- <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions -->
<info>
<author>AF</author>
<desc>Specifies the
resolution of reduced bitmaps: 0 - 72DPI, 1 - 96DPI, 2 - 150DPI, 3 - 200DPI, 4
- 300DPI, 5 - 600DPI.</desc>
@@ -3329,7 +3330,7 @@
<value>3</value>
</prop>
<prop
oor:name="ReducedBitmapIncludesTransparency" oor:type="xs:boolean">
- <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions -->
<info>
<author>AF</author>
<desc>Indicates whether
to reduce the resolution of automatically created substitution bitmaps of
transparent objects.</desc>
@@ -3338,7 +3339,7 @@
<value>true</value>
</prop>
<prop oor:name="ConvertToGreyscales"
oor:type="xs:boolean">
- <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions-->
+ <!-- UIHints: Tools Options -
General Print [Section] PrintFileOptions -->
<info>
<author>AF</author>
<desc>Indicates whether
to create only grayscale output of all objects.</desc>
@@ -3438,7 +3439,7 @@
</prop>
<prop oor:name="Tip" oor:type="xs:boolean">
<!-- OldLocation: Soffice.cfg -->
- <!-- UIHints: Help menu-->
+ <!-- UIHints: Help menu -->
<info>
<author>MBA</author>
<desc>Activates the Tip help.</desc>
@@ -3448,7 +3449,7 @@
</prop>
<prop oor:name="ExtendedTip" oor:type="xs:boolean">
<!-- OldLocation: Soffice.cfg -->
- <!-- UIHints: Help menu-->
+ <!-- UIHints: Help menu -->
<info>
<author>MBA</author>
<desc>Activates the Extended
help.</desc>
@@ -3496,11 +3497,11 @@
</info>
</set>
</group>
- <group oor:name="StartCenter">
- <info>
- <author>PL</author>
- <desc>Contains settings for the start center.</desc>
- </info>
+ <group oor:name="StartCenter">
+ <info>
+ <author>PL</author>
+ <desc>Contains settings for the start
center.</desc>
+ </info>
<prop oor:name="AddFeatureURL"
oor:type="xs:string">
<info>
<desc>Contains a string
specifying the URL to be browsed for additional features (e.g.
extensions)</desc>
@@ -3525,7 +3526,7 @@
</info>
<value>0</value>
</prop>
- </group>
+ </group>
</group>
<group oor:name="Java">
<info>
@@ -4202,28 +4203,28 @@
</info>
<value>false</value>
</prop>
- <prop oor:name="EnablePowerPointPreview"
oor:type="xs:boolean">
- <info>
- <author>SJ</author>
- <desc>Specifies if previews are created when
saving PowerPoint documents.</desc>
- </info>
- <value>true</value>
- </prop>
- <prop oor:name="EnableExcelPreview" oor:type="xs:boolean">
- <info>
- <author>SJ</author>
- <desc>Specifies if previews are created when saving
Excel documents.</desc>
- </info>
- <value>false</value>
- </prop>
- <prop oor:name="EnableWordPreview" oor:type="xs:boolean">
- <info>
- <author>SJ</author>
- <desc>Specifies if previews are created when
saving Word documents.</desc>
- </info>
- <value>false</value>
- </prop>
- </group>
+ <prop
oor:name="EnablePowerPointPreview" oor:type="xs:boolean">
+ <info>
+ <author>SJ</author>
+ <desc>Specifies if
previews are created when saving PowerPoint documents.</desc>
+ </info>
+ <value>true</value>
+ </prop>
+ <prop oor:name="EnableExcelPreview"
oor:type="xs:boolean">
+ <info>
+ <author>SJ</author>
+ <desc>Specifies if
previews are created when saving Excel documents.</desc>
+ </info>
+ <value>false</value>
+ </prop>
+ <prop oor:name="EnableWordPreview"
oor:type="xs:boolean">
+ <info>
+ <author>SJ</author>
+ <desc>Specifies if
previews are created when saving Word documents.</desc>
+ </info>
+ <value>false</value>
+ </prop>
+ </group>
</group>
<group oor:name="Graphic">
<info>
@@ -4270,130 +4271,130 @@
<info>
<desc>Specifies default
settings of graphic export dialogs.</desc>
</info>
- <prop oor:name="PixelExportUnit" oor:type="xs:int">
- <info>
- <desc>Specifies the unit default that is used in the the
graphic export dialog if exporting pixel graphics.</desc>
- </info>
- <constraints>
- <enumeration oor:value="0">
- <info>
- <desc>inches</desc>
- </info>
- </enumeration>
- <enumeration oor:value="1">
- <info>
- <desc>cm</desc>
- </info>
- </enumeration>
- <enumeration oor:value="2">
- <info>
- <desc>mm</desc>
- </info>
- </enumeration>
- <enumeration oor:value="3">
- <info>
- <desc>points</desc>
- </info>
- </enumeration>
- <enumeration oor:value="4">
- <info>
- <desc>pica</desc>
- </info>
- </enumeration>
- <enumeration oor:value="5">
- <info>
- <desc>pixels</desc>
- </info>
- </enumeration>
- <enumeration oor:value="-1">
- <info>
- <desc>default (depends to the metric settings in
tools/options)</desc>
- </info>
- </enumeration>
- </constraints>
- <value>-1</value>
- </prop>
- <prop oor:name="PixelExportResolutionUnit" oor:type="xs:int">
- <info>
- <desc>Specifies the unit default for the resolution that is used
in the the graphic export dialog if exporting pixel graphics.</desc>
- </info>
- <constraints>
- <enumeration oor:value="0">
- <info>
- <desc>pixels/inch</desc>
- </info>
- </enumeration>
- <enumeration oor:value="1">
- <info>
- <desc>pixels/cm</desc>
- </info>
- </enumeration>
- <enumeration oor:value="2">
- <info>
- <desc>pixels/meter</desc>
- </info>
- </enumeration>
- </constraints>
- <value>0</value>
- </prop>
- <prop oor:name="PixelExportResolution" oor:type="xs:int">
- <info>
- <desc>Specifies the logical width of a graphic. [UNIT=1/100
mm].</desc>
- </info>
- <constraints>
- <minInclusive oor:value="1">
- <info>
- <desc>Represents the lowest value that can be entered in the
dialog.</desc>
- </info>
- </minInclusive>
- </constraints>
- <value>96</value>
- </prop>
- <prop oor:name="MaxFilesizeForRealtimePreview" oor:type="xs:int">
- <info>
- <desc>Specifies the maximum raw graphic size in bytes up to
which the realtime preview is enabled, for fast computers this value may be
enlarged</desc>
- </info>
- <value>4000000</value>
- </prop>
- <prop oor:name="VectorExportUnit" oor:type="xs:int">
- <info>
- <desc>Specifies the unit default that is used in the the graphic
export dialog if exporting vector graphics.</desc>
- </info>
- <constraints>
- <enumeration oor:value="0">
- <info>
- <desc>inches</desc>
- </info>
- </enumeration>
- <enumeration oor:value="1">
- <info>
- <desc>cm</desc>
- </info>
- </enumeration>
- <enumeration oor:value="2">
- <info>
- <desc>mm</desc>
- </info>
- </enumeration>
- <enumeration oor:value="3">
- <info>
- <desc>points</desc>
- </info>
- </enumeration>
- <enumeration oor:value="4">
- <info>
- <desc>pica</desc>
- </info>
- </enumeration>
- <enumeration oor:value="-1">
- <info>
- <desc>default (depends to the metric settings in
tools/options)</desc>
- </info>
- </enumeration>
- </constraints>
- <value>-1</value>
- </prop>
- <group oor:name="BMP">
+ <prop oor:name="PixelExportUnit"
oor:type="xs:int">
+ <info>
+ <desc>Specifies the unit
default that is used in the the graphic export dialog if exporting pixel
graphics.</desc>
+ </info>
+ <constraints>
+ <enumeration
oor:value="0">
+ <info>
+
<desc>inches</desc>
+ </info>
+ </enumeration>
+ <enumeration
oor:value="1">
+ <info>
+
<desc>cm</desc>
+ </info>
+ </enumeration>
+ <enumeration
oor:value="2">
+ <info>
+
<desc>mm</desc>
+ </info>
+ </enumeration>
+ <enumeration
oor:value="3">
+ <info>
+
<desc>points</desc>
+ </info>
+ </enumeration>
+ <enumeration
oor:value="4">
+ <info>
+
<desc>pica</desc>
+ </info>
+ </enumeration>
+ <enumeration
oor:value="5">
+ <info>
+
<desc>pixels</desc>
+ </info>
+ </enumeration>
+ <enumeration
oor:value="-1">
+ <info>
+
<desc>default (depends to the metric settings in tools/options)</desc>
+ </info>
+ </enumeration>
+ </constraints>
+ <value>-1</value>
+ </prop>
+ <prop
oor:name="PixelExportResolutionUnit" oor:type="xs:int">
+ <info>
+ <desc>Specifies the
unit default for the resolution that is used in the the graphic export dialog
if exporting pixel graphics.</desc>
+ </info>
+ <constraints>
+ <enumeration
oor:value="0">
+ <info>
+
<desc>pixels/inch</desc>
+ </info>
+ </enumeration>
+ <enumeration
oor:value="1">
+ <info>
+
<desc>pixels/cm</desc>
+ </info>
+ </enumeration>
+ <enumeration
oor:value="2">
+ <info>
+
<desc>pixels/meter</desc>
+ </info>
+ </enumeration>
+ </constraints>
+ <value>0</value>
+ </prop>
+ <prop
oor:name="PixelExportResolution" oor:type="xs:int">
+ <info>
+ <desc>Specifies
the logical width of a graphic. [UNIT=1/100 mm].</desc>
+ </info>
+ <constraints>
+ <minInclusive
oor:value="1">
+ <info>
+
<desc>Represents the lowest value that can be entered in the dialog.</desc>
+ </info>
+ </minInclusive>
+ </constraints>
+ <value>96</value>
+ </prop>
+ <prop
oor:name="MaxFilesizeForRealtimePreview" oor:type="xs:int">
+ <info>
+ <desc>Specifies
the maximum raw graphic size in bytes up to which the realtime preview is
enabled, for fast computers this value may be enlarged</desc>
+ </info>
+ <value>4000000</value>
+ </prop>
+ <prop
oor:name="VectorExportUnit" oor:type="xs:int">
+ <info>
+ <desc>Specifies
the unit default that is used in the the graphic export dialog if exporting
vector graphics.</desc>
+ </info>
+ <constraints>
+
<enumeration oor:value="0">
+
<info>
+
<desc>inches</desc>
+
</info>
+
</enumeration>
+
<enumeration oor:value="1">
+
<info>
+
<desc>cm</desc>
+
</info>
+
</enumeration>
+
<enumeration oor:value="2">
+
<info>
+
<desc>mm</desc>
+
</info>
+
</enumeration>
+
<enumeration oor:value="3">
+
<info>
+
<desc>points</desc>
+
</info>
+
</enumeration>
+
<enumeration oor:value="4">
+
<info>
+
<desc>pica</desc>
+
</info>
+
</enumeration>
+
<enumeration oor:value="-1">
+
<info>
+
<desc>default (depends to the metric settings in tools/options)</desc>
+
</info>
+
</enumeration>
+ </constraints>
+ <value>-1</value>
+ </prop>
+ <group oor:name="BMP">
<info>
<desc>Specifies default
settings of the Windows Bitmap export dialog.</desc>
</info>
@@ -4790,33 +4791,33 @@
<value>1</value>
</prop>
</group>
- <group oor:name="SVG">
- <info>
- <author>KA</author>
- <desc>Specifies default settings of SVG export
dialog.</desc>
- </info>
- <prop oor:name="TinyMode" oor:type="xs:boolean">
- <info>
- <author>KA</author>
- <desc>Specifies if SVG Tiny profile should be
used for export.</desc>
- </info>
- <value>false</value>
- </prop>
- <prop oor:name="EmbedFonts" oor:type="xs:boolean">
- <info>
- <author>KA</author>
- <desc>Specifies if fonts should be embedded
into SVG file.</desc>
- </info>
- <value>true</value>
- </prop>
- <prop oor:name="UseNativeTextDecoration"
oor:type="xs:boolean">
- <info>
- <author>KA</author>
- <desc>Specifies if text decoration like
underlining and strike-through be drawm by using SVG attributes (true) or by
drawing SVG primitives (false).</desc>
- </info>
- <value>true</value>
- </prop>
- </group>
+ <group oor:name="SVG">
+ <info>
+ <author>KA</author>
+ <desc>Specifies default
settings of SVG export dialog.</desc>
+ </info>
+ <prop oor:name="TinyMode"
oor:type="xs:boolean">
+ <info>
+
<author>KA</author>
+ <desc>Specifies
if SVG Tiny profile should be used for export.</desc>
+ </info>
+ <value>false</value>
+ </prop>
+ <prop oor:name="EmbedFonts"
oor:type="xs:boolean">
+ <info>
+
<author>KA</author>
+ <desc>Specifies
if fonts should be embedded into SVG file.</desc>
+ </info>
+ <value>true</value>
+ </prop>
+ <prop
oor:name="UseNativeTextDecoration" oor:type="xs:boolean">
+ <info>
+
<author>KA</author>
+ <desc>Specifies
if text decoration like underlining and strike-through be drawn by using SVG
attributes (true) or by drawing SVG primitives (false).</desc>
+ </info>
+ <value>true</value>
+ </prop>
+ </group>
</group>
</group>
<group oor:name="HTML">
@@ -4829,7 +4830,7 @@
<desc>Contains settings for
HTML import.</desc>
</info>
<prop oor:name="NumbersEnglishUS"
oor:type="xs:boolean">
- <!-- UIHints: Tools Options Load/Save - HTML
Compatibility [Section] Import -->
+ <!-- UIHints: Tools Options
Load/Save - HTML Compatibility [Section] Import -->
<info>
<author>ER</author>
<desc>Specifies if
numbers should be parsed according to the en-US locale instead of the user's
locale.</desc>
@@ -5038,8 +5039,7 @@
</prop>
</group>
</group>
-
- <group oor:name="PDF">
+ <group oor:name="PDF">
<info>
<author>KA</author>
<desc>Specifies default settings of PDF
export dialog.</desc>
@@ -5060,7 +5060,7 @@
<prop oor:name="UseLosslessCompression"
oor:type="xs:boolean">
<info>
<author>SJ</author>
- <desc>Specifies if
graphics are exported to PDF using a lossless compression eg. PNG or if they
are compressed using the JPEG format.</desc>
+ <desc>Specifies if
graphics are exported to PDF using a lossless compression e.g. PNG or if they
are compressed using the JPEG format.</desc>
</info>
<value>false</value>
</prop>
@@ -5165,20 +5165,20 @@
</info>
<value>true</value>
</prop>
- <prop oor:name="ExportFormFields" oor:type="xs:boolean">
+ <prop oor:name="ExportFormFields"
oor:type="xs:boolean">
<info>
<author>pl</author>
<desc>Specifies whether
form fields are exported as widgets or only their fixed print representation is
exported.</desc>
</info>
<value>true</value>
- </prop>
- <prop oor:name="EmbedStandardFonts" oor:type="xs:boolean">
+ </prop>
+ <prop oor:name="EmbedStandardFonts"
oor:type="xs:boolean">
<info>
<author>pl</author>
<desc>Specifies whether
to embed the 14 standard PDF fonts or not.</desc>
</info>
<value>false</value>
- </prop>
+ </prop>
<prop oor:name="FormsType"
oor:type="xs:int">
<info>
<desc>Specifies the
submitted format of a PDF form.</desc>
@@ -5207,27 +5207,27 @@
</constraints>
<value>0</value>
</prop>
- <prop oor:name="AllowDuplicateFieldNames"
oor:type="xs:boolean">
+ <prop
oor:name="AllowDuplicateFieldNames" oor:type="xs:boolean">
<info>
<author>pl</author>
<desc>Specifies whether
multiple form fields exported are allowed to have the same field name.</desc>
</info>
<value>false</value>
- </prop>
- <prop oor:name="IsSkipEmptyPages" oor:type="xs:boolean">
- <info>
- <author>FME</author>
- <desc>Specifies that automatically
inserted empty pages are suppressed. This option is active only if storing
Writer documents.</desc>
- </info>
- <value>true</value>
- </prop>
- <prop oor:name="IsAddStream" oor:type="xs:boolean">
- <info>
- <author>PL</author>
- <desc>Specifies that a stream is inserted
to the PDF file which contains the original document for archiving
purposes.</desc>
- </info>
- <value>false</value>
- </prop>
+ </prop>
+ <prop oor:name="IsSkipEmptyPages"
oor:type="xs:boolean">
+ <info>
+ <author>FME</author>
+ <desc>Specifies that
automatically inserted empty pages are suppressed. This option is active only
if storing Writer documents.</desc>
+ </info>
+ <value>true</value>
+ </prop>
+ <prop oor:name="IsAddStream"
oor:type="xs:boolean">
+ <info>
+ <author>PL</author>
+ <desc>Specifies that a
stream is inserted to the PDF file which contains the original document for
archiving purposes.</desc>
+ </info>
+ <value>false</value>
+ </prop>
<prop oor:name="HideViewerMenubar"
oor:type="xs:boolean">
<info>
<author>beppec56</author>
@@ -5324,7 +5324,7 @@
</enumeration>
<enumeration
oor:value="3">
<info>
-
<desc>Opens magnified to fit the entire width of its boundig box within the
window (cuts out margins).</desc>
+
<desc>Opens magnified to fit the entire width of its bounding box within the
window (cuts out margins).</desc>
</info>
</enumeration>
<enumeration
oor:value="4">
@@ -5335,20 +5335,20 @@
</constraints>
<value>0</value>
</prop>
- <prop oor:name="Zoom" oor:type="xs:int">
+ <prop oor:name="Zoom" oor:type="xs:int">
<info>
<author>pl</author>
<desc>specifies the
zoom level a PDF document is opened with. Only valid if "Magnification" is set
to "4".</desc>
</info>
- <value>100</value>
- </prop>
- <prop oor:name="InitialPage" oor:type="xs:int">
+ <value>100</value>
+ </prop>
+ <prop oor:name="InitialPage"
oor:type="xs:int">
<info>
<author>pl</author>
<desc>Specifies the
page on which a PDF document should be opened in the viewer application.</desc>
</info>
- <value>1</value>
- </prop>
+ <value>1</value>
+ </prop>
<prop oor:name="PageLayout"
oor:type="xs:int">
<info>
<author>beppec56</author>
@@ -5385,7 +5385,7 @@
</info>
<value>false</value>
</prop>
- <!-- PDF Encryption -->
+ <!-- PDF Encryption -->
<prop oor:name="Printing"
oor:type="xs:int">
<info>
<author>beppec56</author>
@@ -5459,7 +5459,7 @@
<value>true</value>
</prop>
<!-- END PDF Encryption -->
- <!-- PDF Version selection -->
+ <!-- PDF Version selection -->
<prop oor:name="SelectPdfVersion"
oor:type="xs:int">
<info>
<author>beppec56</author>
@@ -5480,7 +5480,7 @@
<value>0</value>
</prop>
<!-- END PDF Version selection -->
- <!-- PDF Relative Link -->
+ <!-- PDF Relative Link -->
<prop
oor:name="ExportLinksRelativeFsys" oor:type="xs:boolean">
<info>
<author>beppec56</author>
@@ -5506,7 +5506,7 @@
</enumeration>
<enumeration
oor:value="2">
<info>
-
<desc>Specifies that the PDF will be exported in order to be viewed through an
Internet browser, using the PDF plug-in provided with it. The bookmark of the
URI will be rendered compatible with the target bookmark generated with OOo PDF
Export feature (see ExportBookmarksToPDFDestination, below).</desc>
+
<desc>Specifies that the PDF will be exported in order to be viewed through an
Internet browser, using the PDF plug-in provided with it. The bookmark of the
URI will be rendered compatible with the target bookmark generated with AOO PDF
Export feature (see ExportBookmarksToPDFDestination, below).</desc>
</info>
</enumeration>
</constraints>
@@ -5522,11 +5522,11 @@
<prop
oor:name="ExportBookmarksToPDFDestination" oor:type="xs:boolean">
<info>
<author>beppec56</author>
- <desc>Specifies that
the bookmarks contained in the source OpenOffice.org file should be exported to
the PDF file as Named Destination (see PDF 1.4 section 8.2.1).</desc>
+ <desc>Specifies that
the bookmarks contained in the source OpenOffice file should be exported to the
PDF file as Named Destination (see PDF 1.4 section 8.2.1).</desc>
</info>
<value>false</value>
</prop>
- <!-- END PDF Relative Link -->
+ <!-- END PDF Relative Link -->
</group>
</group>
</group>
@@ -5562,14 +5562,14 @@
<prop oor:name="UseDocumentSystemFileLocking"
oor:type="xs:boolean">
<info>
<author>MAV</author>
- <desc>Allows to specify whether the OOo
document file locking mechanics should use the system file locking.</desc>
+ <desc>Allows to specify whether the AOO
document file locking mechanics should use the system file locking.</desc>
</info>
<value>true</value>
</prop>
<prop oor:name="UseDocumentOOoLockFile"
oor:type="xs:boolean">
<info>
<author>MAV</author>
- <desc>Allows to specify whether the OOo
document file locking mechanics should use the lock file for locking.</desc>
+ <desc>Allows to specify whether the AOO
document file locking mechanics should use the lock file for locking.</desc>
</info>
<value>true</value>
</prop>
@@ -5614,7 +5614,7 @@
</enumeration>
<enumeration oor:value="default">
<info>
- <desc>Default - the
OpenOffice.org default theme</desc>
+ <desc>Default - the
OpenOffice default theme</desc>
</info>
</enumeration>
<enumeration oor:value="hicontrast">
@@ -5680,66 +5680,66 @@
<info>
<desc>specifies certain default layout
settings for form controls. All those settings can be overruled in concrete
documents, they specify creation-time defaults only.</desc>
</info>
- <node-ref oor:name="com.sun.star.text.TextDocument"
oor:node-type="ApplicationControlLayout">
+ <node-ref
oor:name="com.sun.star.text.TextDocument"
oor:node-type="ApplicationControlLayout">
<info>
<desc>specifies certain default
layout settings for form controls in text documents</desc>
</info>
</node-ref>
- <node-ref oor:name="com.sun.star.text.WebDocument"
oor:node-type="ApplicationControlLayout">
+ <node-ref
oor:name="com.sun.star.text.WebDocument"
oor:node-type="ApplicationControlLayout">
<info>
<desc>specifies certain default
layout settings for form controls in web pages</desc>
</info>
</node-ref>
- <node-ref oor:name="com.sun.star.sheet.SpreadsheetDocument"
oor:node-type="ApplicationControlLayout">
+ <node-ref
oor:name="com.sun.star.sheet.SpreadsheetDocument"
oor:node-type="ApplicationControlLayout">
<info>
<desc>specifies certain default
layout settings for form controls in spreadsheet documents</desc>
</info>
</node-ref>
- <node-ref oor:name="com.sun.star.drawing.DrawingDocument"
oor:node-type="ApplicationControlLayout">
+ <node-ref
oor:name="com.sun.star.drawing.DrawingDocument"
oor:node-type="ApplicationControlLayout">
<info>
<desc>specifies certain default
layout settings for form controls in drawing documents</desc>
</info>
</node-ref>
- <node-ref
oor:name="com.sun.star.presentation.PresentationDocument"
oor:node-type="ApplicationControlLayout">
+ <node-ref
oor:name="com.sun.star.presentation.PresentationDocument"
oor:node-type="ApplicationControlLayout">
<info>
<desc>specifies certain default
layout settings for form controls in presentation documents</desc>
</info>
</node-ref>
- <node-ref oor:name="com.sun.star.xforms.XMLFormDocument"
oor:node-type="ApplicationControlLayout">
+ <node-ref
oor:name="com.sun.star.xforms.XMLFormDocument"
oor:node-type="ApplicationControlLayout">
<info>
<desc>specifies certain default
layout settings for form controls in XML form documents</desc>
</info>
</node-ref>
- <node-ref oor:name="com.sun.star.sdb.FormDesign"
oor:node-type="ApplicationControlLayout">
+ <node-ref
oor:name="com.sun.star.sdb.FormDesign" oor:node-type="ApplicationControlLayout">
<info>
<desc>specifies certain default
layout settings for form controls in database form documents</desc>
</info>
</node-ref>
- <node-ref oor:name="com.sun.star.sdb.TextReportDesign"
oor:node-type="ApplicationControlLayout">
+ <node-ref
oor:name="com.sun.star.sdb.TextReportDesign"
oor:node-type="ApplicationControlLayout">
<info>
<desc>specifies certain default
layout settings for form controls in database text report documents.</desc>
</info>
</node-ref>
</group>
- <group oor:name="PropertyBrowser">
- <info>
- <desc>specifies settings for the property browser used for
forms and form controls.</desc>
- </info>
- <prop oor:name="ExperimentalProperties" oor:type="xs:boolean">
- <info>
- <author>FS</author>
- <desc>Enables or disables the property browser's
access to form/control properties which are not officially supported.</desc>
- </info>
- <value>false</value>
- </prop>
- <prop oor:name="DirectHelp" oor:type="xs:boolean">
- <info>
- <author>FS</author>
- <desc>Enables or disables a help section at the bottom
of the property browser, which shows the help of the currently active
property.</desc>
- </info>
- <value>false</value>
- </prop>
- </group>
+ <group oor:name="PropertyBrowser">
+ <info>
+ <desc>specifies settings for the
property browser used for forms and form controls.</desc>
+ </info>
+ <prop oor:name="ExperimentalProperties"
oor:type="xs:boolean">
+ <info>
+ <author>FS</author>
+ <desc>Enables or disables the
property browser's access to form/control properties which are not officially
supported.</desc>
+ </info>
+ <value>false</value>
+ </prop>
+ <prop oor:name="DirectHelp"
oor:type="xs:boolean">
+ <info>
+ <author>FS</author>
+ <desc>Enables or disables a
help section at the bottom of the property browser, which shows the help of the
currently active property.</desc>
+ </info>
+ <value>false</value>
+ </prop>
+ </group>
</group>
<group oor:name="AsianLayout">
<info>
@@ -5749,7 +5749,7 @@
<prop oor:name="IsKerningWesternTextOnly"
oor:type="xs:boolean">
<!-- OldPath: -->
<!-- OldLocation: -->
- <!-- UIHints: Tools Options Asian typography
Asian layout Kerning Western characters only-->
+ <!-- UIHints: Tools Options Asian typography
Asian layout Kerning Western characters only -->
<info>
<author>OS</author>
<desc>Determines the kerning of western
text and/or punctuation inside of Asian text.</desc>
@@ -5851,36 +5851,36 @@
</info>
<value>false</value>
</prop>
- <prop oor:name="ComponentSearchGroupLabel" oor:type="xs:string"
oor:localized="true">
- <!-- UIHints: Edit/Find & Replace -->
- <info>
- <author>OS</author>
- <desc>Specifies the divider label in case of a
component-based search extension.</desc>
- </info>
- </prop>
- <prop oor:name="ComponentSearchCommandLabel1" oor:type="xs:string"
oor:localized="true">
- <!-- UIHints: Edit/Find & Replace -->
- <info>
- <author>OS</author>
- <desc>Specifies the label of the first component-based
search command.</desc>
- </info>
- </prop>
- <prop oor:name="ComponentSearchCommandLabel2" oor:type="xs:string"
oor:localized="true">
- <!-- UIHints: Edit/Find & Replace -->
- <info>
- <author>OS</author>
- <desc>Specifies the label of the second component-based
search command.</desc>
- </info>
- </prop>
- <prop oor:name="IsNotes" oor:type="xs:boolean">
- <!-- UIHints: Edit Search/Replace -->
- <info>
- <author>mod</author>
- <desc>Specifies if search includes
comments(SwPostItFields)</desc>
- </info>
+ <prop oor:name="ComponentSearchGroupLabel"
oor:type="xs:string" oor:localized="true">
+ <!-- UIHints: Edit/Find & Replace -->
+ <info>
+ <author>OS</author>
+ <desc>Specifies the divider label in
case of a component-based search extension.</desc>
+ </info>
+ </prop>
+ <prop oor:name="ComponentSearchCommandLabel1"
oor:type="xs:string" oor:localized="true">
+ <!-- UIHints: Edit/Find & Replace -->
+ <info>
+ <author>OS</author>
+ <desc>Specifies the label of the first
component-based search command.</desc>
+ </info>
+ </prop>
+ <prop oor:name="ComponentSearchCommandLabel2"
oor:type="xs:string" oor:localized="true">
+ <!-- UIHints: Edit/Find & Replace -->
+ <info>
+ <author>OS</author>
+ <desc>Specifies the label of the second
component-based search command.</desc>
+ </info>
+ </prop>
+ <prop oor:name="IsNotes" oor:type="xs:boolean">
+ <!-- UIHints: Edit Search/Replace -->
+ <info>
+ <author>mod</author>
+ <desc>Specifies if search includes
comments(SwPostItFields)</desc>
+ </info>
<value>false</value>
- </prop>
- <group oor:name="Japanese">
+ </prop>
+ <group oor:name="Japanese">
<info>
<author>OS</author>
<desc>Contains search options for the
Japanese language.</desc>
@@ -6127,7 +6127,7 @@
<prop oor:name="IsAllowAnimatedText"
oor:type="xs:boolean">
<info>
<author>AF</author>
- <desc>Indicates whether to allow all
textual animation like blinking and scrolling in all SO/OO applications.</desc>
+ <desc>Indicates whether to allow all
textual animation like blinking and scrolling in all AOO applications.</desc>
<label>Allow animated text</label>
</info>
<value>true</value>
@@ -6135,7 +6135,7 @@
<prop oor:name="IsAutomaticFontColor"
oor:type="xs:boolean">
<info>
<author>OS</author>
- <desc>Overrides all text color
attributes set in a SO/OO document for display only.</desc>
+ <desc>Overrides all text color
attributes set in a AOO document for display only.</desc>
<label>Always use automatic font color
for screen display</label>
</info>
<value>false</value>
@@ -6156,62 +6156,62 @@
</info>
<value>false</value>
</prop>
- <prop oor:name="EdgeBlending" oor:type="xs:short">
- <info>
- <author>ALG</author>
- <desc>
- Option to use EdgeBlending for previews in the UI (for
ColorValueSet, ColorDropDown, FillStyle/LineStyle
- previews, etc...). EdgeBlending will visualize a one pixel
border on the preview object with interpolated
- colors (default: TopLeft White, BottomRight Black) so that a
nice 3D effect is shown. It is a percent
- value describing how strong the effect shall be. The value 0%
switches it off, while the value 100% will
- cover the preview object's border completely with one pixel.
Values in-between will be alpha-blended with
- the original preview image.
- </desc>
- <label>Defines the EdgeBlending for Previews in Percent.</label>
- </info>
- <value>35</value>
- </prop>
- <prop oor:name="ListBoxMaximumLineCount" oor:type="xs:short">
- <info>
- <author>ALG</author>
- <desc>
- This option controls how many lines of a ListBox will be shown
as a maximum. If the ListBox has less lines,
- all lines will be shown when opening the drop down content. If
it has more lines, the visible number of
- lines will be limited to this number. The value 0 disables
this feature, negative values are not allowed.
- This feature may not be used automatically by all ListBox
implementations,
- but it gives a central hint value to use if an implementation
wants to adapt to something useful.
- </desc>
- <label>Defines the maximum number of lines visible in a
ListBox.</label>
- </info>
- <value>25</value>
- </prop>
- <prop oor:name="ColorValueSetColumnCount" oor:type="xs:short">
- <info>
- <author>ALG</author>
- <desc>
- This option controls how many columns the ColorValueSets (the
matrix-organized dialogs for color select)
- will have. The default is 12 and this is aligned with the
layout of the standard color palette. thus, when you
- change this value, you should know what you do. This setting
also influences some width-oriented layouts in
- dialogs where this ColorValueSets are used, e.g. FillStyle
dialog.
- </desc>
- <label>Defines the number of columns that will be shown in a
ColorValueSet.</label>
- </info>
- <value>12</value>
- </prop>
- <prop oor:name="PreviewUsesCheckeredBackground"
oor:type="xs:boolean">
- <info>
- <author>ALG</author>
- <desc>
- This option allows to make previews (e.g. UI previews for
object attirbutes) show the content with a checkeded
- background to allow simple identification and better preview
of transparent content, e.g. when a draw object
- is filled with a transparent graphic (SVG or bitmap) the
preview will show the checkered background shine
- through, so the user can identify that the fill has
transparency with a single look.
- </desc>
- <label>Shows previews with shining through checkered background
to visualize transparency.</label>
- </info>
- <value>false</value>
- </prop>
- </group>
+ <prop oor:name="EdgeBlending" oor:type="xs:short">
+ <info>
+ <author>ALG</author>
+ <desc>
+ Option to use EdgeBlending for previews
in the UI (for ColorValueSet, ColorDropDown, FillStyle/LineStyle
+ previews, etc...). EdgeBlending will
visualize a one pixel border on the preview object with interpolated
+ colors (default: TopLeft White,
BottomRight Black) so that a nice 3D effect is shown. It is a percent
+ value describing how strong the effect
shall be. The value 0% switches it off, while the value 100% will
+ cover the preview object's border
completely with one pixel. Values in-between will be alpha-blended with
+ the original preview image.
+ </desc>
+ <label>Defines the EdgeBlending for
Previews in Percent.</label>
+ </info>
+ <value>35</value>
+ </prop>
+ <prop oor:name="ListBoxMaximumLineCount"
oor:type="xs:short">
+ <info>
+ <author>ALG</author>
+ <desc>
+ This option controls how many lines of
a ListBox will be shown as a maximum. If the ListBox has less lines,
+ all lines will be shown when opening
the drop down content. If it has more lines, the visible number of
+ lines will be limited to this number.
The value 0 disables this feature, negative values are not allowed.
+ This feature may not be used
automatically by all ListBox implementations,
+ but it gives a central hint value to
use if an implementation wants to adapt to something useful.
+ </desc>
+ <label>Defines the maximum number of
lines visible in a ListBox.</label>
+ </info>
+ <value>25</value>
+ </prop>
+ <prop oor:name="ColorValueSetColumnCount"
oor:type="xs:short">
+ <info>
+ <author>ALG</author>
+ <desc>
+ This option controls how many columns
the ColorValueSets (the matrix-organized dialogs for color select)
+ will have. The default is 12 and this
is aligned with the layout of the standard color palette. thus, when you
+ change this value, you should know what
you do. This setting also influences some width-oriented layouts in
+ dialogs where this ColorValueSets are
used, e.g. FillStyle dialog.
+ </desc>
+ <label>Defines the number of columns
that will be shown in a ColorValueSet.</label>
+ </info>
+ <value>12</value>
+ </prop>
+ <prop oor:name="PreviewUsesCheckeredBackground"
oor:type="xs:boolean">
+ <info>
+ <author>ALG</author>
+ <desc>
+ This option allows to make previews
(e.g. UI previews for object attributes) show the content with a checkered
+ background to allow simple
identification and better preview of transparent content, e.g. when a draw
object
+ is filled with a transparent graphic
(SVG or bitmap) the preview will show the checkered background shine
+ through, so the user can identify that
the fill has transparency with a single look.
+ </desc>
+ <label>Shows previews with shining
through checkered background to visualize transparency.</label>
+ </info>
+ <value>false</value>
+ </prop>
+ </group>
<set oor:name="OfficeObjects" oor:node-type="ObjectNames">
<info>
<deprecated>Replaced by
org.openoffice.Office.Embedding/ObjectNames.</deprecated>
@@ -6366,24 +6366,24 @@
</info>
<value>false</value>
</prop>
- <prop oor:name="CTLSequenceCheckingTypeAndReplace"
oor:type="xs:boolean">
- <!-- UIHints: setup -->
- <info>
- <desc>Specifies whether CTL input sequences are
corrected while typing. Is only effective when CTLSequenceChecking is
true.</desc>
- </info>
- <value>false</value>
- </prop>
- <prop oor:name="CTLCursorMovement" oor:type="xs:int">
- <!-- UIHints: options-->
+ <prop
oor:name="CTLSequenceCheckingTypeAndReplace" oor:type="xs:boolean">
+ <!-- UIHints: setup -->
+ <info>
+ <desc>Specifies whether CTL
input sequences are corrected while typing. Is only effective when
CTLSequenceChecking is true.</desc>
+ </info>
+ <value>false</value>
+ </prop>
+ <prop oor:name="CTLCursorMovement"
oor:type="xs:int">
+ <!-- UIHints: options -->
<info>
<desc>Specifies the type of
text cursor movement (logical (0) or visual (1)) within mixed text (RTL and
LTR).</desc>
</info>
<value>0</value>
</prop>
<prop oor:name="CTLTextNumerals"
oor:type="xs:int">
- <!-- UIHints: options-->
+ <!-- UIHints: options -->
<info>
- <desc>Specifies the type of
numerals (Arabic (0), Hindi (1), system settings (2) or Context(3)) is used per
default in all applications.</desc>
+ <desc>Specifies the type of
numerals (Arabic (0), Hindi (1), system settings (2) or Context(3)) is used per
default in all applications.</desc>
</info>
<value>0</value>
</prop>
@@ -6419,27 +6419,25 @@
<author>FME</author>
<desc>Contains settings for smart tags.</desc>
</info>
- <group oor:name="Writer">
- <info>
- <author>FME</author>
+ <group oor:name="Writer">
+ <info>
+ <author>FME</author>
<desc>Contains Writer specific settings
for smart tags.</desc>
</info>
- <prop oor:name="RecognizeSmartTags" oor:type="xs:boolean">
- <info>
- <author>FME</author>
- <desc>Specifies whether smart tag recognization is
enabled.</desc>
- </info>
- <value>true</value>
- </prop>
- <prop oor:name="ExcludedSmartTagTypes"
oor:type="oor:string-list">
- <info>
- <author>FME</author>
- <desc>A list of excluded smart tag types.</desc>
- </info>
- </prop>
- </group>
- </group>
+ <prop oor:name="RecognizeSmartTags"
oor:type="xs:boolean">
+ <info>
+ <author>FME</author>
+ <desc>Specifies whether smart
tag recognition is enabled.</desc>
+ </info>
+ <value>true</value>
+ </prop>
+ <prop oor:name="ExcludedSmartTagTypes"
oor:type="oor:string-list">
+ <info>
+ <author>FME</author>
+ <desc>A list of excluded smart
tag types.</desc>
+ </info>
+ </prop>
+ </group>
+ </group>
</component>
</oor:component-schema>
-
-
