This is an automated email from the ASF dual-hosted git repository.
mseidel pushed a commit to branch trunk
in repository https://gitbox.apache.org/repos/asf/openoffice.git
The following commit(s) were added to refs/heads/trunk by this push:
new a6c9da1 Fixed typos, removed whitespace
a6c9da1 is described below
commit a6c9da1f594bff216e44f0716493904db5a8054f
Author: mseidel <msei...@apache.org>
AuthorDate: Thu Nov 11 18:58:43 2021 +0100
Fixed typos, removed whitespace
---
main/svx/source/toolbars/extrusionbar.cxx | 58 ++++++++++++++-----------------
main/svx/source/toolbars/extrusionbar.src | 38 +++++++++++---------
main/svx/source/toolbars/fontworkbar.cxx | 24 +++++--------
main/svx/source/toolbars/fontworkbar.src | 10 +++---
4 files changed, 62 insertions(+), 68 deletions(-)
diff --git a/main/svx/source/toolbars/extrusionbar.cxx
b/main/svx/source/toolbars/extrusionbar.cxx
index e9631f6..892e60d 100644
--- a/main/svx/source/toolbars/extrusionbar.cxx
+++ b/main/svx/source/toolbars/extrusionbar.cxx
@@ -1,5 +1,5 @@
/**************************************************************
- *
+ *
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
@@ -7,16 +7,16 @@
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
- *
+ *
* http://www.apache.org/licenses/LICENSE-2.0
- *
+ *
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
- *
+ *
*************************************************************/
@@ -60,10 +60,8 @@ using namespace ::com::sun::star::drawing;
using namespace ::com::sun::star::uno;
/*************************************************************************
-|*
|* Standardinterface deklarieren (Die Slotmap darf nicht leer sein, also
|* tragen wir etwas ein, was hier (hoffentlich) nie vorkommt).
-|*
\************************************************************************/
#define ShellClass ExtrusionBar
@@ -82,9 +80,7 @@ TYPEINIT1( ExtrusionBar, SfxShell );
/*************************************************************************
-|*
|* Standard-Konstruktor
-|*
\************************************************************************/
ExtrusionBar::ExtrusionBar(SfxViewShell* pViewShell )
@@ -100,9 +96,7 @@ ExtrusionBar::ExtrusionBar(SfxViewShell* pViewShell )
/*************************************************************************
-|*
|* Destruktor
-|*
\************************************************************************/
ExtrusionBar::~ExtrusionBar()
@@ -151,7 +145,7 @@ static void impl_execute( SdrView*, SfxRequest& rReq,
SdrCustomShapeGeometryItem
static const rtl::OUString sViewPoint( RTL_CONSTASCII_USTRINGPARAM
( "ViewPoint" ) );
static const rtl::OUString sOrigin( RTL_CONSTASCII_USTRINGPARAM (
"Origin" ) );
static const rtl::OUString sSkew( RTL_CONSTASCII_USTRINGPARAM (
"Skew" ) );
- static const rtl::OUString sDepth( RTL_CONSTASCII_USTRINGPARAM (
"Depth" ) );
+ static const rtl::OUString sDepth( RTL_CONSTASCII_USTRINGPARAM (
"Depth" ) );
sal_uInt16 nSID = rReq.GetSlot();
switch( nSID )
@@ -273,7 +267,7 @@ static void impl_execute( SdrView*, SfxRequest& rReq,
SdrCustomShapeGeometryItem
aPropValue.Value <<= aViewPoint;
rGeometryItem.SetPropertyValue( sExtrusion,
aPropValue );
-
+
EnhancedCustomShapeParameterPair aOriginPropPair;
aOriginPropPair.First.Value <<= fOriginX;
aOriginPropPair.First.Type =
EnhancedCustomShapeParameterType::NORMAL;
@@ -328,7 +322,7 @@ static void impl_execute( SdrView*, SfxRequest& rReq,
SdrCustomShapeGeometryItem
break;
case SID_EXTRUSION_3D_COLOR:
{
- static const rtl::OUString sExtrusionColor(
RTL_CONSTASCII_USTRINGPARAM ( "Color" ) );
+ static const rtl::OUString sExtrusionColor(
RTL_CONSTASCII_USTRINGPARAM ( "Color" ) );
if( rReq.GetArgs() && rReq.GetArgs()->GetItemState(
SID_EXTRUSION_3D_COLOR ) == SFX_ITEM_SET)
{
@@ -417,7 +411,7 @@ static void impl_execute( SdrView*, SfxRequest& rReq,
SdrCustomShapeGeometryItem
if( rReq.GetArgs() && rReq.GetArgs()->GetItemState(
SID_EXTRUSION_LIGHTING_INTENSITY ) == SFX_ITEM_SET)
{
sal_Int32 nLevel = ((const
SfxInt32Item*)rReq.GetArgs()->GetItem(SID_EXTRUSION_LIGHTING_INTENSITY))->GetValue();
-
+
double fBrightness;
sal_Bool bHarsh2;
double fLevel1;
@@ -594,17 +588,17 @@ void ExtrusionBar::execute( SdrView* pSdrView,
SfxRequest& rReq, SfxBindings& rB
if( bUndo )
pSdrView->EndUndo();
- // simulate a context change:
- // force SelectionHasChanged() being called
- // so that extrusion bar will be visible/hidden
- pSdrView->MarkListHasChanged();
+ // simulate a context change:
+ // force SelectionHasChanged() being
called
+ // so that extrusion bar will be
visible/hidden
+ pSdrView->MarkListHasChanged();
}
}
}
break;
case SID_EXTRUSION_DEPTH_DIALOG:
- if( rReq.GetArgs() &&
+ if( rReq.GetArgs() &&
(rReq.GetArgs()->GetItemState(
SID_EXTRUSION_DEPTH ) == SFX_ITEM_SET) &&
(rReq.GetArgs()->GetItemState( SID_ATTR_METRIC
) == SFX_ITEM_SET))
{
@@ -628,7 +622,7 @@ void ExtrusionBar::execute( SdrView* pSdrView, SfxRequest&
rReq, SfxBindings& rB
if( nSID == SID_EXTRUSION_TOOGLE )
{
static sal_uInt16 SidArray[] = {
- SID_EXTRUSION_TILT_DOWN,
+ SID_EXTRUSION_TILT_DOWN,
SID_EXTRUSION_TILT_UP,
SID_EXTRUSION_TILT_LEFT,
SID_EXTRUSION_TILT_RIGHT,
@@ -659,7 +653,7 @@ void getExtrusionDirectionState( SdrView* pSdrView,
SfxItemSet& rSet )
static const rtl::OUString sOrigin( RTL_CONSTASCII_USTRINGPARAM (
"Origin" ) );
static const rtl::OUString sSkew( RTL_CONSTASCII_USTRINGPARAM (
"Skew" ) );
static const rtl::OUString sProjectionMode(
RTL_CONSTASCII_USTRINGPARAM ( "ProjectionMode" ) );
-
+
com::sun::star::uno::Any* pAny;
double fFinalSkewAngle = -1;
@@ -807,7 +801,7 @@ void getExtrusionProjectionState( SdrView* pSdrView,
SfxItemSet& rSet )
static const rtl::OUString sExtrusion( RTL_CONSTASCII_USTRINGPARAM
( "Extrusion" ) );
static const rtl::OUString sProjectionMode(
RTL_CONSTASCII_USTRINGPARAM ( "ProjectionMode" ) );
-
+
com::sun::star::uno::Any* pAny;
sal_Int32 nFinalProjection = -1;
@@ -866,7 +860,7 @@ void getExtrusionSurfaceState( SdrView* pSdrView,
SfxItemSet& rSet )
static const rtl::OUString sSpecularity(
RTL_CONSTASCII_USTRINGPARAM ( "Specularity" ) );
static const rtl::OUString sDiffusion( RTL_CONSTASCII_USTRINGPARAM
( "Diffusion" ) );
static const rtl::OUString sMetal( RTL_CONSTASCII_USTRINGPARAM (
"Metal" ) );
-
+
com::sun::star::uno::Any* pAny;
sal_Int32 nFinalSurface = -1;
@@ -890,7 +884,7 @@ void getExtrusionSurfaceState( SdrView* pSdrView,
SfxItemSet& rSet )
continue;
}
- sal_Int32 nSurface = 0; // wire frame
+ sal_Int32 nSurface = 0; // wireframe
ShadeMode eShadeMode( ShadeMode_FLAT );
pAny = aGeometryItem.GetPropertyValueByName(
sExtrusion, sShadeMode );
@@ -909,7 +903,7 @@ void getExtrusionSurfaceState( SdrView* pSdrView,
SfxItemSet& rSet )
nSurface = 3; // metal
}
else
- {
+ {
double fSpecularity = 0;
pAny =
aGeometryItem.GetPropertyValueByName( sExtrusion, sSpecularity );
if( pAny )
@@ -952,7 +946,7 @@ void getExtrusionDepthState( SdrView* pSdrView, SfxItemSet&
rSet )
static const rtl::OUString sExtrusion( RTL_CONSTASCII_USTRINGPARAM
( "Extrusion" ) );
static const rtl::OUString sDepth( RTL_CONSTASCII_USTRINGPARAM (
"Depth" ) );
-
+
com::sun::star::uno::Any* pAny;
double fFinalDepth = -1;
@@ -1113,7 +1107,7 @@ void getExtrusionLightingIntensityState( SdrView*
pSdrView, SfxItemSet& rSet )
static const rtl::OUString sExtrusion( RTL_CONSTASCII_USTRINGPARAM
( "Extrusion" ) );
static const rtl::OUString sBrightness(
RTL_CONSTASCII_USTRINGPARAM ( "Brightness" ) );
-
+
com::sun::star::uno::Any* pAny;
int nFinalLevel = -1;
@@ -1149,7 +1143,7 @@ void getExtrusionLightingIntensityState( SdrView*
pSdrView, SfxItemSet& rSet )
}
else if( fBrightness >= 10.0 )
{
- nLevel = 1; // Noraml;
+ nLevel = 1; // Normal
}
else
{
@@ -1180,7 +1174,7 @@ void getExtrusionColorState( SdrView* pSdrView,
SfxItemSet& rSet )
sal_uIntPtr nCount = rMarkList.GetMarkCount(), i;
static const rtl::OUString sExtrusion( RTL_CONSTASCII_USTRINGPARAM
( "Extrusion" ) );
- static const rtl::OUString sExtrusionColor(
RTL_CONSTASCII_USTRINGPARAM ( "Color" ) );
+ static const rtl::OUString sExtrusionColor(
RTL_CONSTASCII_USTRINGPARAM ( "Color" ) );
com::sun::star::uno::Any* pAny;
@@ -1288,8 +1282,8 @@ void ExtrusionBar::getState( SdrView* pSdrView,
SfxItemSet& rSet )
{
getExtrusionProjectionState( pSdrView, rSet );
}
- const bool bOnlyExtrudedCustomShapes =
- checkForSelectedCustomShapes( pSdrView, true );
+ const bool bOnlyExtrudedCustomShapes =
+ checkForSelectedCustomShapes( pSdrView, true );
if (rSet.GetItemState(SID_EXTRUSION_TILT_DOWN) != SFX_ITEM_UNKNOWN)
{
if (! bOnlyExtrudedCustomShapes)
@@ -1322,7 +1316,7 @@ void ExtrusionBar::getState( SdrView* pSdrView,
SfxItemSet& rSet )
}
if (rSet.GetItemState(SID_EXTRUSION_DEPTH_FLOATER) != SFX_ITEM_UNKNOWN)
{
- if (! bOnlyExtrudedCustomShapes)
+ if (! bOnlyExtrudedCustomShapes)
rSet.DisableItem( SID_EXTRUSION_DEPTH_FLOATER );
}
if (rSet.GetItemState(SID_EXTRUSION_DIRECTION_FLOATER) !=
SFX_ITEM_UNKNOWN)
diff --git a/main/svx/source/toolbars/extrusionbar.src
b/main/svx/source/toolbars/extrusionbar.src
index 2624bb0..db138f9 100644
--- a/main/svx/source/toolbars/extrusionbar.src
+++ b/main/svx/source/toolbars/extrusionbar.src
@@ -1,5 +1,5 @@
/**************************************************************
- *
+ *
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
@@ -7,71 +7,75 @@
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
- *
+ *
* http://www.apache.org/licenses/LICENSE-2.0
- *
+ *
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
- *
+ *
*************************************************************/
+
+
#include <svx/svxids.hrc>
#include <svx/dialogs.hrc>
String RID_SVX_EXTRUSION_BAR
{
- Text [ en-US ] = "Extrusion";
+ Text [ en-US ] = "Extrusion" ;
};
String RID_SVXSTR_UNDO_APPLY_EXTRUSION_ON_OFF
{
- Text [ en-US ] = "Apply Extrusion On/Off";
+ Text [ en-US ] = "Apply Extrusion On/Off" ;
};
String RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_DOWN
{
- Text [ en-US ] = "Tilt Down";
+ Text [ en-US ] = "Tilt Down" ;
};
String RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_UP
{
- Text [ en-US ] = "Tilt Up";
+ Text [ en-US ] = "Tilt Up" ;
};
String RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_LEFT
{
- Text [ en-US ] = "Tilt Left";
+ Text [ en-US ] = "Tilt Left" ;
};
String RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_RIGHT
{
- Text [ en-US ] = "Tilt Right";
+ Text [ en-US ] = "Tilt Right" ;
};
String RID_SVXSTR_UNDO_APPLY_EXTRUSION_DEPTH
{
- Text [ en-US ] = "Change Extrusion Depth";
+ Text [ en-US ] = "Change Extrusion Depth" ;
};
String RID_SVXSTR_UNDO_APPLY_EXTRUSION_ORIENTATION
{
- Text [ en-US ] = "Change Orientation";
+ Text [ en-US ] = "Change Orientation" ;
};
String RID_SVXSTR_UNDO_APPLY_EXTRUSION_PROJECTION
{
- Text [ en-US ] = "Change Projection Type";
+ Text [ en-US ] = "Change Projection Type" ;
};
String RID_SVXSTR_UNDO_APPLY_EXTRUSION_LIGHTING
{
- Text [ en-US ] = "Change Lighting";
+ Text [ en-US ] = "Change Lighting" ;
};
String RID_SVXSTR_UNDO_APPLY_EXTRUSION_BRIGHTNESS
{
- Text [ en-US ] = "Change Brightness";
+ Text [ en-US ] = "Change Brightness" ;
};
String RID_SVXSTR_UNDO_APPLY_EXTRUSION_SURFACE
{
- Text [ en-US ] = "Change Extrusion Surface";
+ Text [ en-US ] = "Change Extrusion Surface" ;
};
String RID_SVXSTR_UNDO_APPLY_EXTRUSION_COLOR
{
- Text [ en-US ] = "Change Extrusion Color";
+ Text [ en-US ] = "Change Extrusion Color" ;
};
+
+// ********************************************************************** EOF
diff --git a/main/svx/source/toolbars/fontworkbar.cxx
b/main/svx/source/toolbars/fontworkbar.cxx
index 015bb3f..a78d99c 100644
--- a/main/svx/source/toolbars/fontworkbar.cxx
+++ b/main/svx/source/toolbars/fontworkbar.cxx
@@ -1,5 +1,5 @@
/**************************************************************
- *
+ *
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
@@ -7,16 +7,16 @@
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
- *
+ *
* http://www.apache.org/licenses/LICENSE-2.0
- *
+ *
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
- *
+ *
*************************************************************/
@@ -176,10 +176,8 @@ void SetFontWorkShapeTypeState( SdrView* pSdrView,
SfxItemSet& rSet )
}
/*************************************************************************
-|*
|* Standardinterface deklarieren (Die Slotmap darf nicht leer sein, also
|* tragen wir etwas ein, was hier (hoffentlich) nie vorkommt).
-|*
\************************************************************************/
#define ShellClass FontworkBar
@@ -198,9 +196,7 @@ TYPEINIT1( FontworkBar, SfxShell );
/*************************************************************************
-|*
|* Standard-Konstruktor
-|*
\************************************************************************/
FontworkBar::FontworkBar(SfxViewShell* pViewShell )
@@ -216,9 +212,7 @@ FontworkBar::FontworkBar(SfxViewShell* pViewShell )
/*************************************************************************
-|*
|* Destruktor
-|*
\************************************************************************/
FontworkBar::~FontworkBar()
@@ -231,11 +225,11 @@ static Window* ImpGetViewWin(SdrView* pView)
if( pView )
{
const sal_uInt32 nAnz(pView->PaintWindowCount());
- for(sal_uInt32 nNum(0L); nNum < nAnz; nNum++)
+ for(sal_uInt32 nNum(0L); nNum < nAnz; nNum++)
{
OutputDevice* pOut =
&(pView->GetPaintWindow(nNum)->GetOutputDevice());
- if(OUTDEV_WINDOW == pOut->GetOutDevType())
+ if(OUTDEV_WINDOW == pOut->GetOutDevType())
{
return (Window*)pOut;
}
@@ -373,7 +367,7 @@ void GetGeometryForCustomShape( SdrCustomShapeGeometryItem&
rGeometryItem, const
rGeometryItem.ClearPropertyValue( sPath );
/* SJ: CustomShapes that are available in the gallery are having the
highest
- priority, so we will take a look there before taking the internal
default */
+ priority, so we will take a look there before taking the
internal default */
if ( GalleryExplorer::GetSdrObjCount( GALLERY_THEME_POWERPOINT ) )
{
@@ -508,7 +502,7 @@ void FontworkBar::execute( SdrView* pSdrView, SfxRequest&
rReq, SfxBindings& rBi
pObj->BroadcastObjectChange();
if( bUndo )
pSdrView->EndUndo();
- pSdrView->AdjustMarkHdl();
//HMH sal_True );
+ pSdrView->AdjustMarkHdl(); //
HMH sal_True );
rBindings.Invalidate(
SID_FONTWORK_SHAPE_TYPE );
}
}
@@ -629,7 +623,7 @@ void FontworkBar::getState( SdrView* pSdrView, SfxItemSet&
rSet )
}
if ( rSet.GetItemState( SID_FONTWORK_SHAPE_TYPE ) != SFX_ITEM_UNKNOWN )
{
- if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
+ if ( !checkForSelectedFontWork( pSdrView, nCheckStatus ) )
rSet.DisableItem( SID_FONTWORK_SHAPE_TYPE );
else
SetFontWorkShapeTypeState( pSdrView, rSet );
diff --git a/main/svx/source/toolbars/fontworkbar.src
b/main/svx/source/toolbars/fontworkbar.src
index e278d3b..cc7d2fb 100644
--- a/main/svx/source/toolbars/fontworkbar.src
+++ b/main/svx/source/toolbars/fontworkbar.src
@@ -1,5 +1,5 @@
/**************************************************************
- *
+ *
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
@@ -7,16 +7,16 @@
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
- *
+ *
* http://www.apache.org/licenses/LICENSE-2.0
- *
+ *
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
- *
+ *
*************************************************************/
@@ -47,3 +47,5 @@ String RID_SVXSTR_UNDO_APPLY_FONTWORK_CHARACTER_SPACING
{
Text [ en-US ] = "Apply Fontwork Character Spacing";
};
+
+// ********************************************************************** EOF
