This is an automated email from the ASF dual-hosted git repository.
robbie pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/qpid-dispatch.git
commit 16ac2c5032c23e6430a1e41d6ff28078c5a17fcc
Author: Jiri Danek <jda...@redhat.com>
AuthorDate: Sun Aug 2 21:46:10 2020 +0200
DISPATCH-1739 Add GitHub Action w/ sharding and bubblewrap
This is a CI job triggered by pushes and pull requests sent to GitHub.
Output artifacts include parts of the workspace before running tests; this
is
what the machines running test shards get. At the end, each shard outputs
a XML CTest report.
Note that `ctest -j2` results in test log lines being mixed up in stdout.
Refer to the output XML report or use grep (grep for lines starting with
the test number) to get understandable log.
* Using python 3.6 as this is the version that works on all platforms
tested.
* Using two shards with -j2, which should balance speed and convenience.
* Using ccache w/ 400MB size limit, to avoid purges during the build.
This closes #809
---
.github/workflows/build.yaml | 199 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 199 insertions(+)
diff --git a/.github/workflows/build.yaml b/.github/workflows/build.yaml
new file mode 100644
index 0000000..ebfba60
--- /dev/null
+++ b/.github/workflows/build.yaml
@@ -0,0 +1,199 @@
+#
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied. See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+
+name: Build
+
+on: [push, pull_request]
+
+jobs:
+ compile:
+ name: "Compile (${{matrix.os}}, ${{matrix.runtimeCheck}})"
+ runs-on: ${{ matrix.os }}
+ strategy:
+ fail-fast: false
+ matrix:
+ os: [ubuntu-20.04]
+ buildType: [RelWithDebInfo]
+ runtimeCheck: [asan]
+ env:
+ BuildType: ${{matrix.buildType}}
+ ProtonBuildDir: ${{github.workspace}}/qpid-proton/build
+ DispatchBuildDir: ${{github.workspace}}/qpid-dispatch/build
+ InstallPrefix: ${{github.workspace}}/install
+
+ ProtonCMakeExtraArgs: '-DCMAKE_C_COMPILER_LAUNCHER=ccache
-DCMAKE_CXX_COMPILER_LAUNCHER=ccache -DBUILD_BINDINGS=python
-DRUNTIME_CHECK=${{matrix.runtimeCheck}}'
+ DispatchCMakeExtraArgs: '-DCMAKE_C_COMPILER_LAUNCHER=ccache
-DCMAKE_CXX_COMPILER_LAUNCHER=ccache -DCONSOLE_INSTALL=OFF
-DCMAKE_C_FLAGS=-DQD_MEMORY_DEBUG -DRUNTIME_CHECK=${{matrix.runtimeCheck}}'
+
+ CCACHE_BASEDIR: ${{github.workspace}}
+ CCACHE_DIR: ${{github.workspace}}/.ccache
+ CCACHE_COMPRESS: 'true'
+ CCACHE_MAXSIZE: '400MB'
+ steps:
+
+ - name: Show environment (Linux)
+ if: ${{ always() && runner.os == 'Linux' }}
+ run: env -0 | sort -z | tr '\0' '\n'
+
+ - uses: actions/checkout@v2
+ with:
+ repository: 'apache/qpid-proton'
+ ref: 'master'
+ path: 'qpid-proton'
+
+ - uses: actions/checkout@v2
+ with:
+ path: 'qpid-dispatch'
+
+ #
https://cristianadam.eu/20200113/speeding-up-c-plus-plus-github-actions-using-ccache/
+ - name: Prepare ccache timestamp
+ id: ccache_cache_timestamp
+ shell: cmake -P {0}
+ run: |
+ string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+ message("::set-output name=timestamp::${current_date}")
+
+ - uses: actions/cache@v2
+ env:
+ cache-name: cache-ccache
+ with:
+ path: .ccache
+ key: ${{ matrix.os }}-${{ matrix.runtimeCheck }}-${{ env.cache-name
}}-${{ steps.ccache_cache_timestamp.outputs.timestamp }}
+ restore-keys: |
+ ${{ matrix.os }}-${{ matrix.runtimeCheck }}-${{ env.cache-name }}
+
+ - name: Create Build and Install directories
+ run: mkdir -p "${ProtonBuildDir}" "${DispatchBuildDir}"
"{InstallPrefix}"
+
+ - name: Setup python
+ uses: actions/setup-python@v2
+ with:
+ python-version: 3.6
+ architecture: x64
+
+ - name: Install python dependencies
+ run: python -m pip install setuptools wheel tox
+
+ - name: Install Linux dependencies
+ if: ${{ runner.os == 'Linux' }}
+ run: |
+ sudo apt install -y swig libpython3-dev libsasl2-dev libjsoncpp-dev
libwebsockets-dev ccache ninja-build pixz
+
+ - name: Zero ccache stats
+ run: ccache -z
+
+ - name: qpid-proton cmake configure
+ working-directory: ${{env.ProtonBuildDir}}
+ run: cmake "${{github.workspace}}/qpid-proton"
"-DCMAKE_INSTALL_PREFIX=${InstallPrefix}" "-DCMAKE_BUILD_TYPE=${BuildType}"
"-DBUILD_TESTING=OFF" "-DENABLE_FUZZ_TESTING=OFF" "-GNinja"
${ProtonCMakeExtraArgs}
+
+ - name: qpid-proton cmake build/install
+ run: cmake --build "${ProtonBuildDir}" --config ${BuildType} -t install
+
+ - name: Display ccache stats
+ run: ccache -s
+
+ - name: qpid-dispatch cmake configure
+ working-directory: ${{env.DispatchBuildDir}}
+ run: cmake "${{github.workspace}}/qpid-dispatch"
"-DCMAKE_INSTALL_PREFIX=${InstallPrefix}" "-DCMAKE_BUILD_TYPE=${BuildType}"
"-GNinja" "-DUSE_BWRAP=ON" ${DispatchCMakeExtraArgs}
+
+ - name: qpid-dispatch cmake build/install
+ run: cmake --build "${DispatchBuildDir}" --config ${BuildType} -t
install
+
+ - name: Display ccache stats
+ run: ccache -s
+
+ # github actions/upload-artifact@v2 does not preserve executable
permission on binaries
+ - name: Compress build
+ working-directory: ${{github.workspace}}
+ run: tar -I pixz -cf /tmp/archive.tar.xz --exclude '*.o' --exclude
'*.pyc' --exclude '.git' --exclude='qpid-dispatch/build/console' qpid-dispatch
install qpid-proton/build/python/pkgs
+
+ - name: Upload archive
+ uses: actions/upload-artifact@v2
+ with:
+ name:
qpid_dispatch_wrk_${{matrix.os}}_${{matrix.buildType}}_${{matrix.runtimeCheck}}
+ path: /tmp/archive.tar.xz
+
+ test:
+ name: 'Test (${{matrix.os}}, ${{matrix.runtimeCheck}}, shard
${{matrix.shard}} of ${{matrix.shards}})'
+ runs-on: ${{ matrix.os }}
+ needs: [compile]
+ strategy:
+ fail-fast: false
+ matrix:
+ os: [ubuntu-20.04]
+ buildType: [RelWithDebInfo]
+ runtimeCheck: [asan]
+ shard: [1, 2]
+ shards: [2]
+ env:
+ BuildType: ${{matrix.buildType}}
+ ProtonBuildDir: ${{github.workspace}}/qpid-proton/build
+ DispatchBuildDir: ${{github.workspace}}/qpid-dispatch/build
+ InstallPrefix: ${{github.workspace}}/install
+ LD_LIBRARY_PATH: ${{github.workspace}}/install/lib
+ steps:
+
+ - name: Show environment (Linux)
+ if: ${{ always() && runner.os == 'Linux' }}
+ run: env -0 | sort -z | tr '\0' '\n'
+
+ - name: Download Build
+ uses: actions/download-artifact@v2
+ with:
+ name:
qpid_dispatch_wrk_${{matrix.os}}_${{matrix.buildType}}_${{matrix.runtimeCheck}}
+
+ - name: Setup python
+ uses: actions/setup-python@v2
+ with:
+ python-version: 3.6
+ architecture: x64
+
+ - name: Install python dependencies
+ run: python -m pip install tox
+
+ - name: Install Linux dependencies
+ if: ${{ runner.os == 'Linux' }}
+ run: |
+ sudo apt install -y libsasl2-2 libsasl2-modules sasl2-bin
libjsoncpp1 libwebsockets15 pixz bubblewrap
+
+ - name: Unpack archive
+ run: tar -I pixz -xf archive.tar.xz
+
+ - name: install qpid-proton python wheel
+ run: python -m pip install
${ProtonBuildDir}/python/pkgs/python_qpid_proton*.whl
+
+ - name: CTest
+ working-directory: ${{env.DispatchBuildDir}}
+ run: |
+ ulimit -c unlimited
+ ctest -C ${BuildType} -V -T Test --no-compress-output -I
${{matrix.shard}},,${{matrix.shards}} -j2
+
+ - name: Upload test results
+ uses: actions/upload-artifact@v2
+ if: ${{ ! cancelled() }}
+ with:
+ name:
Test_Results_${{matrix.os}}_${{matrix.buildType}}_${{matrix.runtimeCheck}}_${{matrix.shard}}
+ path: ${{env.DispatchBuildDir}}/Testing/**/*.xml
+
+ - name: Upload core files (if any)
+ uses: actions/upload-artifact@v2
+ if: failure()
+ with:
+ name:
cores_${{matrix.os}}_${{matrix.buildType}}_${{matrix.runtimeCheck}}_${{matrix.shard}}
+ path: |
+ **/core
---------------------------------------------------------------------
To unsubscribe, e-mail: commits-unsubscr...@qpid.apache.org
For additional commands, e-mail: commits-h...@qpid.apache.org
