Mychaela, Tried Magnetite hybrid and it worked without any problems with any SIM I have. Compilation time is really long. I didn't really profile anything, but I noticed that wine is trying to setup graphical environment to run every command. Have you considered wineconsole instead?
I reviewed Citrine log from S/N1 and this is the difference not working: GPF trace id=A7 ts=00019420 PL->PCO tc=07 "HM cb_mmi_sat_cbch_req(), sat_enabled = 0, modus = 255" working: GPF trace id=A7 ts=00007F1B PL->PCO tc=07 "HM cb_mmi_sat_cbch_req(), sat_enabled = 1, modus = 255" I like Citrine flavor :) because it is built completely with GCC and it is really fast to recompile even from scratch. I was trying to figure out how do the trace flags work in Citrine, I'd like to find out how we end up in the function cb_mmi_sat_cbch_req() after enabling CFUN=1 General tracing seems to be enabled, but I need more details not only errors. If you have any suggestions, I would really appreciate this. -Serg On 5/6/17, Mychaela Falconia <mychaela.falco...@gmail.com> wrote: > Hi Serg, > >> It worked once with different SIM card, but it is definitely not a >> hardware >> issue because Magnetite build works every time with the same SIM card. >> Maybe L1/DSP is configured a bit differently and if my calibration values >> are a bit off, Citrine may not be able to detect carriers. > > I don't see how the quality of calibration could be the cause of the > problem you are having with Citrine, as your log shows that the fw > does not even attempt to connect to a cell, i.e., the upper layers of > the G23M protocol stack are not commanding L1 to make a network sync > attempt. And because L1 is not being commanded to do the operation in > question, I don't see how it could be an L1 or DSP problem either - > instead it must be some glitch higher up in the protocol stack code. > > The G23M PS used in Citrine is not too polished, i.e., it may still > have bugs that need to be shaken out, and the issue you are having > looks like one of them. However, my preferred approach to debugging > these G23M PS problems is to debug them first in the TCS2/TCS3 hybrid > config of Magnetite (see doc/Modem-configs in the fc-magnetite source > tree), and then port to Citrine if there is commercial demand for the > latter. > > Thus you might want to try building Magnetite in the hybrid config > (different from the l1reconst config I currently use and recommend for > production use), and see if the SIM that's giving you trouble in > Citrine works in Magnetite TCS2/TCS3 hybrid or not - this experiment > would narrow the search for the bug. > > M~ > _______________________________________________ > Community mailing list > Community@freecalypso.org > https://www.freecalypso.org/mailman/listinfo/community > _______________________________________________ Community mailing list Community@freecalypso.org https://www.freecalypso.org/mailman/listinfo/community