This spacer looks like it could be lasercut cheaply. What's the thickness of the spacer?
08.06.2018, 07:00, "Serg l" <s...@tvman.us>: > Hi Mychaela, > > So far so good. I think it fits well enough for prototyping purposes. I > didn't need to do any major adjustments, just removed two extra pits and > increased diameter of holes to 1.3 mm > > Here are some pictures https://photos.app.goo.gl/JnEG1PDttqF2g0uz2 > > And STL file > https://drive.google.com/open?id=1-4xOKPFfhbvObmyy3zsuw-oyksh64_Af > > With such small nozzle it takes about 10 minutes to make this part, I think > it can go faster, but I used very safe settings, still have lots of room > for improvement. > > I made two runs and results look repeatable. > > How many do you need for now? > > -Serg > > On Tue, Jun 5, 2018 at 6:37 PM, Mychaela Falconia < > mychaela.falco...@gmail.com> wrote: > >> Hi Serg! >> >> > I ran two samples, one with 0.4 nozzle, on the right and another 0.2 >> > nozzle, on the left. >> > [...] >> > Overall it looks okay, corners hold reasonable tension without breaking. >> >> I just sent one of my Startek LCD samples out your way, the Post >> Office says you should receive it around this Friday. When you >> receive the LCD, then we'll know for real how well this spacer fits. >> >> TIA, >> Mychaela >> _______________________________________________ >> Community mailing list >> Community@freecalypso.org >> https://www.freecalypso.org/mailman/listinfo/community > > _______________________________________________ > Community mailing list > Community@freecalypso.org > https://www.freecalypso.org/mailman/listinfo/community
_______________________________________________ Community mailing list Community@freecalypso.org https://www.freecalypso.org/mailman/listinfo/community