On Sat, 22 Dec 2007 21:15:50 -0500, "Nick Guenther" <[EMAIL PROTECTED]> said: > On Dec 22, 2007 12:38 PM, Nicolas Linkert <[EMAIL PROTECTED]> wrote: > > Hi, > > > > I am geting confused with the network settings: > > > > - my PC has IP 192.168.0.2 > > - my router has IP 192.168.0.1 > > - my printer has IP 192.168.0.10 > > > > Now I am, supposed to set usb0 to 192.168.0.202. Does that work with my > > current configuration? Or do I need to have > > > > 192.168.0.100 PC > > 192.168.0.101 router > > 192.168.0.102 printer > > 192.168.0.200 usb0 > > 192.168.0.202 phone > > You're probably getting confused because you don't realize that your > PC will have *two* IPs. The network card with .2 is different then the > network interface that the neo presents. The PC will have two > addresses: .2 (ethernet) and .200 (usb0) and the neo has .202 (it > already has it, in the default configuration). > You will also have to make sure the PC is bridging packets from usb0 > to the other interfaces. The details of how to do this depend on your > OS.. it sounds like you have Ubuntu?
Almost: Debian. Best regards, Nicolas _______________________________________________ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community