Well, I haven't had any luck getting Pro/Engineer Wildfire 4.0 to install on Linux with Wine. It fails at a different point every time with one of a dozen documented errors. They suggesting ordering & installing off a CD to fix most of those issues.
Guillermo, I actually started an email to you previously, but wanted to try my hand at getting Pro/E to run first. As it stands I can't find anything to load the Pro/E geometry. Would you be willing to translate the new Openmoko Neo FreeRunner Pro/E file http://downloads.openmoko.org/CAD/NeoFreerunner_ProE.zip to some alternate formats (IGES, STEP, etc)? Also good job on your Neo skin. It looks great & most of those files load perfectly for me. If you could translate the new Pro/E file into STEP & IGES, then I have good faith I could load them into a 3D modeler program. Thanks, Jeremiah On Sat, 2008-05-24 at 11:16 -0700, steve wrote: > Guillermo may be bale to help. > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of christooss > Sent: Thursday, May 22, 2008 2:50 PM > To: [EMAIL PROTECTED]; List for Openmoko community discussion > Subject: Re: IGES & STEP CAD file issues > > Jeremiah Flerchinger wrote: > > I was curious how many people have been playing with the Neo CAD files? > > After I found the FreeRunner would be different in case design from the > > 1973, I held off on using the files. Since no-one has posted > > conversions of the new Pro/E files I decided to go back & look at the > > old IGES & STEP files and plan modifications I'd like to make. > > > > Do the 1973 IGES and/or STEP files work well for anyone? VariCAD either > > crashes (STEP) or returns a failure to convert dialog (IGES). Salome > > loads the STEP model but has all kind of geometries that go in the wrong > > directions (inverted buttons going out of case instead of in, etc). gCAD > > does about the same as Salome. > > > > I'm trying to install a 30 day trial version of Pro/E Wildfire 4.0 right > > now. If I'm lucky I can run it in Wine and I can see if it can export > > models that work any better for me. > > > > > > > Please wirte if it works. > > _______________________________________________ > > Openmoko community mailing list > > community@lists.openmoko.org > > http://lists.openmoko.org/mailman/listinfo/community > > > > _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community