On Fri, Jul 18, 2008 at 11:29:12AM +0930, Rod Whitby wrote: > Ken Restivo wrote: > > I'm thinking about flashing the Uboot to get working APM capability. > > > > The instructions on the Flashing_openmoko WIKI page say that it is very > > important to only flash the uboot image that matches the hardware revision > > of the phone (obviously), but it doesn't say *how* to find out what board > > revision you have. > > > > I'd be glad to add that to the page with the instructions on how to flash, > > if someone could tell me where to find the revision. > > > > I remember stumbling across it somewhere (probably in /proc), but I've > > since forgotten. > > cat /proc/cpuinfo
Thanks. Mine says rev 0350. Is that Revision 3? Should I use the v3 version of the uBoot? I want to make absolutely sure. And to add this to the Wiki to save others the trouble. -ken -------- Processor : ARM920T rev 0 (v4l) BogoMIPS : 199.47 Features : swp half thumb CPU implementer : 0x41 CPU architecture: 4T CPU variant : 0x1 CPU part : 0x920 CPU revision : 0 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format A Cache format : Harvard I size : 16384 I assoc : 64 I line length : 32 I sets : 8 D size : 16384 D assoc : 64 D line length : 32 D sets : 8 Hardware : GTA02 Revision : 0350 Serial : 0000000000000000 _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community