I confirm also that if from the UI I try to select a network from available gsm networks, it asks me if I want to switch to manual and fails :
log shows a failed : AT+COPS=1,2,20810 But manually I was able to do it by : AT+COPS=1,2,"20810" => looks like the quotes where missing in command issued by Qtopia (if I omit them I have the same error message) And still there is the error when directly selecting the Change Mode in menu, from Automatic to Manual : AT+COPS=1,2,0 fails =>provider number is missing ("20810") (or is "0" meaningful for current provider? if so maybe it is only the quotes missing...) On Tue, Jul 22, 2008 at 23:34, Cédric Berger <[EMAIL PROTECTED]> wrote: > not so easy to try since at home I do not have access to roaming network... > > but when I try to select manual search mode (while yet connected) from > the Network selection menu, which fails, log shows : > AT+COPS=1,2,0 > +CME ERROR: 3 > > so it looks like the AT+COPS=1,2,0 is wrong : last number should have > been provider number (20810) > > > I was able from console to do a successful AT+COPS=1,1,"SFR" (and I > think also AT+COPS=1,2,"20810") > > (when connected to roaming network,I thought I had seen failed log of > AT+COPS=1,2,20810 but I will have try again tomorrow....) > > > > On Tue, Jul 15, 2008 at 09:09, Cédric Berger <[EMAIL PROTECTED]> wrote: >> Hi, >> >> My freerunner connects to my operator with no problems (SFR, france), >> and when I am in switzerland (geneva) and loose the signal, it >> automatically switches to another (swisscom... roaming costs so much >> more expensive for me...). That's fine with automatic mode. >> >> But I cannot force it into manual mode (once it has switched, even >> though the SFR signal is back -and even if it is stronger than >> swisscom's-, it won't try to go back to SFR). >> Even rebooting, it stays on the same network. >> >> When I try in the settings-Call Networks to "Select operator", it >> fails ("Failed to register to the selected network operator"). >> Same error when I just try to switch mode from Automatic to Manual, on >> either of these 2 networks. >> >> Any idea ? Does this work for some people ? >> >> I guess I should try in console with AT commands... >> >> (I could only force switch back by putting my SIM in my old phone, >> switching network, and SIM back into freerunner ! ) >> _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community