have you tried a different SD before sending it?? 2008/8/3 Scott Derrick <[EMAIL PROTECTED]>: > Well I think I screwed my SD card reader trying to solder on the GPS fix. > > I got the cap soldered on, slamed in an sd card and fired it up. > > No card. Nothing mounted at /media/card and doing a manual mount > produced the error > > mount: special device /dev/mmcblk0p1 does not exist > > BUMMER! > > So.... pulled the card out, got out the big magnifier and there was a > solder spec between pin 6 and 7! *hit! > > I unsoldered the cap, sucked and scraped all the solder out. Metered > between all the pins to verify no shorts( I know I should have done that > first). Put the card back in and no joy.. nada.. > > Not sure how to proceed now. Is Openmoko going to be taking FR's back > for repairs? > > Scott > > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community >
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community