Hi! Thanks for sharing the information! I managed to get calibration right by copying the xglamo and libts.0* files from 2007.2 image to debian and starting xfce via ssh. It worked then with the standard /etc/pointercal from the 2007.2 image. But I then had the problem, that gdm didn't recognize the ts anymore at all and only if I started xfce by ssh did it recognize the ts. Mysterious problems, but I am sure that they will be solved soon! good luck, edistar
On Thu, Aug 7, 2008 at 6:20 PM, Gregoire Gentil <[EMAIL PROTECTED]> wrote: > Hello, > > After much efforts (but thanks for the page ;-) ), I have managed to > install this on my microSD card: > http://wiki.openmoko.org/wiki/Debian > > I can reach the gdm screen but the calibration of the touchscreen is > totally flaky. > > After another set of painful efforts, I have managed to install > libts-bin and run ts_calibrate. If you want to know, you need to do this > from the terminal over the USB-connection: > > export TSLIB_CALIBFILE="/etc/pointercal" > export TSLIB_CONFFILE="/etc/ts.conf" > export TSLIB_PLUGINDIR="/usr/lib/ts" > export TSLIB_FBDEVICE=/dev/fb0 > export TSLIB_CONSOLEDEVICE=none > export TSLIB_TSDEVICE=/dev/input/event1 > ts_calibrate > > I get some numbers on /etc/pointercal but there are quite different if I > run ts_calibrate a few times. In any case, the touchscreen is still > totally mad and I can't use xvkbd to input the login info. In the best > case scenario, the pointer is around 200x200 pixels NW from the touch. > > Then, I have played with xorg.conf. I have tried the rotate option and > many other things, but unsuccessfully. > > Any idea? Thanks in advance, > > Gregoire > > PS: In case, you ask: > > more /etc/ts.conf > # Uncomment if you wish to use the linux input layer event interface > module_raw input > > # Uncomment if you're using a Sharp Zaurus SL-5500/SL-5000d > # module_raw collie > > # Uncomment if you're using a Sharp Zaurus SL-C700/C750/C760/C860 > # module_raw corgi > > # Uncomment if you're using a device with a UCB1200/1300/1400 TS > interface > # module_raw ucb1x00 > > # Uncomment if you're using an HP iPaq h3600 or similar > # module_raw h3600 > > # Uncomment if you're using a Hitachi Webpad > # module_raw mk712 > > # Uncomment if you're using an IBM Arctic II > # module_raw arctic2 > > module pthres pmin=1 > module variance delta=30 > module dejitter delta=100 > module linear > > > > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community >
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community