Is it possible to execute some script every time the neo comes out from suspend only once?
I would like to suspend it with a manually script which enables the sd_idleclk, syncs the sd-card, waits a few seconds and then go to sleep. But after resume i want to disable sd_idleclk automatically so that the gps works without problems. And i don't want to do the sd_idleclk de-/activation trick when starting a gps app. Fox Mulder wrote: > Maybe it is possible to get a workaround for this problem until it is > fixed. When using a custom suspend script we maybe could do this stuff > manual. > > When i would suspend the neo i start a script which first activates the > sd_idleclk. Than it activates some access to the sd card and after that > suspend the neo. And after resuming maybe reverse these steps. > This is quite a workaround, but when it works i'm willing to do this > until the problem gets fixed. :) > > Ciao, > Rainer > > Simon Matthews wrote: >> With my 8G Sandisk SD card, i can reliably fix the problems i have been >> having by turning on the SD clock all the time. To do this type the >> command >> echo 1 > /sys/module/glamo_mci/parameters/sd_idleclk >> then do something that will access the SD card before doing a suspend. >> >> This of course won't do the GPS much good, but i think the real fix >> might be to give the SD card more clock cycles before and after commands >> to give it time to finish executing commands. >> >> Simon >> >> >> _______________________________________________ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community