Hi everyone, I am having the same problem as Kevin once had, now. I have immed reflashed my FR's om2007 with 2008 and kernel: tried these: from openmoko2008 update site: Om2008.8-gta02-20080826.uImage.bin - this one says bad kernel image these combinations work, (but the usb error is still there, error -110): Om2008.8-gta02-20080831.rootfs.jffs2 testing-om-gta02-20080831.uImage.bin testing-om-gta02-20080902.uImage.bin gta02v5_and_up-u-boot.bin (Aug 26th)
Tried various ways (booting with/without usb cable, plugging it later etc.), re-inserting uhci_hcd etc. cdc_ether and usbnet compiled as modules too. inserted (maually). this comes up though only when i keep pressing power button in ASU (not too long thouth, of course :)) usb 6-1: new full speed USB device using uhci_hcd and address 21 usb 6-1: device descriptor read/64, error -110 though with the newest (today's) kernel it appears: usb 6-1: device descriptor read/64, error -84 Thanks huge! Keep up the great work! -- sledge Kevin Zuber rašė: > Hi Community, > > After a few days not using the usb cable and an opkg update and an > system update (Ubuntu with Kernel 2.6.24-20), the cable doesn't work > anymore. > > Dmesg says: > > [ 211.983257] usb 1-1: new full speed USB device using uhci_hcd and > address 2 > [ 227.081309] usb 1-1: device descriptor read/64, error -110 > [ 242.288201] usb 1-1: device descriptor read/64, error -110 > [ 242.502543] usb 1-1: new full speed USB device using uhci_hcd and > address 3 > [ 257.600058] usb 1-1: device descriptor read/64, error -110 > [ 272.800497] usb 1-1: device descriptor read/64, error -110 > [ 273.016294] usb 1-1: new full speed USB device using uhci_hcd and > address 4 > > I double checked it with another computer with an older system (Ubuntu > 7.10 and 8.04 without updates), but the same again. > > So it should be the cable (hardware defect?) oder the neo update (using > 2007.2 with latest updates). > Did I miss something, any other ideas? Has someone this problems, too? > > It also seems, that the neo isn't charging anymore when it is connected > to the cable. The usb power supply is still working fine and can charge > the neo. > > Thanks a lot for your answer! > > Kevin > > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
