Hi all,
I have problems accessing my 8Go SD Card
following different advices found in the wiki and the mailing list, I
managed to change env in uboot
after boot :
[EMAIL PROTECTED]:~# cat /proc/cmdline
glamo_mci.sd_max_clk=10000000 rootfstype=jffs2 root=/dev/mtdblock6
console=ttySAC2,115200 console=tty0 loglevel=8 regular_boot
mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs)
but still :
[EMAIL PROTECTED]:~# fdisk /dev/mmcblk0
fdisk: cannot read from /dev/mmcblk0
this is quite erratic, as if I insist, that is if I enter the fdisk
command several times, it eventually find the card and format it. I can
then mount the partitions.
[EMAIL PROTECTED]:~# fdisk /dev/mmcblk0
fdisk: cannot read from /dev/mmcblk0
[EMAIL PROTECTED]:~# fdisk /dev/mmcblk0
fdisk: cannot read from /dev/mmcblk0
[EMAIL PROTECTED]:~# fdisk /dev/mmcblk0
fdisk: cannot read from /dev/mmcblk0
[EMAIL PROTECTED]:~# fdisk /dev/mmcblk0
fdisk: cannot read from /dev/mmcblk0
[EMAIL PROTECTED]:~# fdisk /dev/mmcblk0
The number of cylinders for this disk is set to 242560.
....
But after next boot, I drop into the same situation, can't find the card.
Any parameters suggestion ?
many thanks in advance
NiL
begin:vcard
fn:Nicolas LAURANCE
n:LAURANCE;Nicolas
org:Zindep
adr;quoted-printable:;;25, rue de l'ancienne Mairie;Bourgbarr=C3=A9;;35230;France
email;internet:[EMAIL PROTECTED]
title:Consultant
tel;work:02 99 57 03 09
tel;fax:02 99 57 03 69
tel;cell:06 09 86 59 96
url:http://www.zindep.com
version:2.1
end:vcard
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
